Biomedical subjects

Michael T Bowers

Publications and source records attributed to Michael T Bowers.

At least 19 recordsLinked to original sources

PubMed2007

Intermolecular interactions in biomolecular systems examined by mass spectrometry.

With the development of electrospray and matrix-assisted laser desorption ionization, mass spectrometry (MS) evolved into a powerful tool in the field of biochemistry. Whereas MS is primarily analytical in nature, an increasing number of MS research groups employ the method to address fundamental biochemical questions. Probing the interaction of noncovalently bound molecules in the mass spectrometer is one of the most interesting MS-based experiments possible today, with the potential of making a significant contribution to the basic understanding of the structure and function of biochemical complexes. Here we review a number of current research efforts employing primarily MS techniques to investigate intermolecular interactions in biochemical systems. Examples chosen include the interaction of biomolecules with solvent molecules; interactions between nucleic-acid molecules, in particular, interactions in duplex and quadruplex structures; and interactions between proteins involved in neurodegenerative diseases. Finally we conclude by presenting a few examples of very large biomolecular assemblies in the mega-Dalton range analyzed by MS.

Mass Spectrometry↗

PubMed2006

Hydration of mononucleotides.

The sequential addition of water molecules to protonated and deprotonated forms of the four mononucleotides dAMP, dCMP, dGMP, and dTMP was studied experimentally by equilibrium measurements using an electrospray mass spectrometer equipped with a drift cell and theoretically by computational methods including molecular modeling and density functional theory calculations. Experiments were carried out in positive and negative ion mode, and calculations included the protonated and deprotonated forms of the four nucleotides. For deprotonated anionic nucleotides the experimental enthalpies of hydration (DeltaH degrees n) were found to be similar for all four systems and varied between -10.1 and -11.5 kcal mol-1 for the first water molecule (n = 1) and -8.3 and -9.6 kcal mol-1 for additional water molecules (n = 2-4). Theory indicated that the first water molecule binds to the charge-carrying phosphate group. Simulations of deprotonated mononucleotides with four water molecules yielded a large number of structures with similar energies. In some of the structures all four water molecules cluster around the phosphate group, and in other structures the four water molecules each hydrate a different functional group of the nucleotide. These include the phosphate group, the deoxyribose hydroxyl group, and various functional groups on the nucleobases. Experimental DeltaH degrees 1 values for the protonated cationic mononucleotides ranged from -10.5 to -13.5 kcal mol-1 with more negative values (< or =-12 kcal mol-1) for dCMP, dGMP, and dTMP and the least negative value for dAMP. For n = 2-4 DeltaH degrees n values varied from -6.9 to -9.7 kcal/mol and were similar in value to the deprotonated nucleotides except for dAMP. Theory on the protonated nucleotides indicated that the first water molecule binds to the charge-carrying group for dCMP, dGMP, and dTMP. For protonated dAMP, on the other hand, the charge-carrying N3 group is well self-solvated by the phosphate group and not readily available for a hydrogen bond with the water molecule. The insight gained on nucleotide stabilization by individual water molecules is used to discuss the competition between hydration of individual nucleotides and Watson-Crick base pairing.

DNA↗

PubMed2006

PNA/dsDNA complexes: site specific binding and dsDNA biosensor applications.

The ability of peptide nucleic acids (PNA) to form specific higher-order (i.e., three- and four-stranded) complexes with DNA makes it an ideal structural probe for designing strand-specific dsDNA biosensors. Higher-order complexes are formed between a dye-labeled charge-neutral PNA probe and complementary dsDNA. Addition of a light-harvesting cationic conjugated polymer (CCP) yields supramolecular structures held together by electrostatic forces that incorporate the CCP and the dye-labeled PNA/DNA complexes. Optimization of optical properties allows for excitation of the CCP and subsequent fluorescence resonance energy transfer (FRET) to the PNA-bound dye. In the case of noncomplementary dsDNA, complexation between the probe and target does not occur, and dye emission is weak. The binding between PNA and noncomplementary and complementary dsDNA was examined by several methods. Gel electrophoresis confirms specificity of binding and the formation of higher-order complexes. Nano-electrospray mass spectrometry gives insight into the stoichiometric composition, including PNA/DNA, PNA(2)/DNA, PNA/DNA(2), and PNA(2)/DNA(2) complexes. Finally, structural characteristics and binding-site specificity were examined using ion mobility mass spectrometry in conjunction with molecular dynamics. These results give possible conformations for each of the higher-order complexes formed and show exclusive binding of PNA to the complementary stretch of DNA for all PNA/DNA complexes. Overall, the capability and specificity of binding indicates that the CCP/PNA assay is a feasible detection method for dsDNA and eliminates the need for thermal denaturing steps typically required for DNA hybridization probe assays.

Biosensing Techniques↗

PubMed2006

Cyclo[n]pyrroles: size and site-specific binding to G-quadruplexes.

Inhibiting the enzyme telomerase by stabilizing the G-quadruplex has potential in anticancer drug design. Diprotonated cyclo[n]pyrroles represent a set of expanded porphyrin analogues with structures similar to that of telomestatin, a natural product known to bind to and stabilize G-quadruplexes. As a first step toward testing whether cyclo[n]pyrroles display a similar function, a series of diprotonated cyclo[n]pyrroles (where n = 6, 7, and 8) was each added to the human telomere repeat sequence d(T(2)AG(3))(4) and examined with mass spectrometry, ion mobility, and molecular dynamics calculations. Nano-ESI-MS indicated that the smaller the cyclo[n]pyrrole, the more strongly it binds to the telomeric sequence. It was also found that cyclo[6]pyrrole bound to d(T(2)AG(3))(4) better than octaethylporphyrin, a finding rationalized by cyclo[6]pyrrole having a 2+ charge, while octaethylporphyrin bears no charge. Ion mobility measurements were used to measure the collision cross section of each d(T(2)AG(3))(4)/cyclo[n]pyrrole complex. Only one peak was observed in the arrival time distributions for all complexes, and the experimental cross sections indicated that only structures with d(T(2)AG(3))(4) in an antiparallel G-quadruplex arrangement and each cyclo[n]pyrrole externally stacked below the G-quartets occur under these experimental conditions. When the cyclo[n]pyrroles were intercalated or nonspecifically bound to the quadruplex, or if conformations different than antiparallel were considered for d(T(2)AG(3))(4), the theoretical cross sections did not match experiment. On this basis, it is inferred that (1) external stacking represents the dominant binding mode for the interaction of cyclo[n]pyrroles with d(T(2)AG(3))(4) and (2) the overall size and charge of the cyclo[n]pyrroles play important roles in defining the binding strength.

Binding Sites↗

PubMed2006

Pinning mononuclear Au on the surface of titania.

We have deposited Au atoms on the surface of titania without sintering or surface damage. Mass-selected Au+ atoms were deposited from the gas phase at room temperature with kinetic energies from <3 to 190+/-3.5 eV. Scanning tunneling microscopy reveals island formation following deposition at <3 eV, while mainly atomic features are observed for energies between approximately 35 and approximately 190 eV. A mixture of islands and atomic features is observed at a landing energy of 20+/-3.5 eV, suggesting a critical energy above which pinning occurs. Cluster size is also probed as a function of coverage in the deposition of Au+ with 100 eV of energy, revealing that sintering begins at a coverage of only 0.06 ML. These observations suggest a mechanism in which high-energy collision leads to the annealing of any impact-created surface damage and the pinning of Au atoms to the surface. We provide a new method of preparing isolated Au atoms on an oxide surface, which can serve as a platform for catalytic studies.

Journal Article↗

PubMed2006

Elucidating amyloid beta-protein folding and assembly: A multidisciplinary approach.

Oligomeric, neurotoxic amyloid protein assemblies are thought to be causative agents in Alzheimer's and other neurodegenerative diseases. Development of oligomer-specific therapeutic agents requires a mechanistic understanding of the oligomerization process. This is a daunting task because amyloidogenic protein oligomers often are metastable and comprise structurally heterogeneous populations in equilibrium with monomers and fibrils. A single methodological approach cannot elucidate the entire protein assembly process. An integrated multidisciplinary program is required. We discuss here the synergistic application of in hydro, in vacuo, and in silico methods to the study of the amyloid beta-protein, the key pathogenetic agent in Alzheimer's disease.

Amino Acid Sequence↗

PubMed2006

Amyloid beta-protein monomer structure: a computational and experimental study.

The structural properties of the Abeta42 peptide, a main constituent of the amyloid plaques formed in Alzheimer's disease, were investigated through a combination of ion-mobility mass spectrometry and theoretical modeling. Replica exchange molecular dynamics simulations using a fully atomic description of the peptide and implicit water solvent were performed on the -3 charge state of the peptide, its preferred state under experimental conditions. Equilibrated structures at 300 K were clustered into three distinct families with similar structural features within a family and with significant root mean square deviations between families. An analysis of secondary structure indicates the Abeta42 peptide conformations are dominated by loops and turns but show some helical structure in the C-terminal hydrophobic tail. A second calculation on Abeta42 in a solvent-free environment yields compact structures turned "inside out" from the solution structures (hydrophobic parts on the outside, polar parts on the inside). Ion mobility experiments on the Abeta42 -3 charge state electrosprayed from solution yield a bimodal arrival time distribution. This distribution can be quantitatively fit using cross-sections from dehydrated forms of the three families of calculated solution structures and the calculated solvent-free family of structures. Implications of the calculations on the early stages of aggregation of Abeta42 are discussed.

Amyloid beta-Peptides↗

PubMed2006

Structure of the 21-30 fragment of amyloid beta-protein.

Folding and self-assembly of the 42-residue amyloid beta-protein (Abeta) are linked to Alzheimer's disease (AD). The 21-30 region of Abeta, Abeta(21-30), is resistant to proteolysis and is believed to nucleate the folding of full-length Abeta. The conformational space accessible to the Abeta(21-30) peptide is investigated by using replica exchange molecular dynamics simulations in explicit solvent. Conformations belonging to the global free energy minimum (the "native" state) from simulation are in good agreement with reported NMR structures. These conformations possess a bend motif spanning the central residues V24-K28. This bend is stabilized by a network of hydrogen bonds involving the side chain of residue D23 and the amide hydrogens of adjacent residues G25, S26, N27, and K28, as well as by a salt bridge formed between side chains of K28 and E22. The non-native states of this peptide are compact and retain a native-like bend topology. The persistence of structure in the denatured state may account for the resistance of this peptide to protease degradation and aggregation, even at elevated temperatures.

Amyloid beta-Peptides↗

PubMed2005

Probing shapes of bichromophoric metal-organic complexes using ion mobility mass spectrometry.

Ion mobility mass spectrometry (IM-MS) was used to probe the structures of several metal complexes carrying pendant chromophores. The three complexes investigated were the copper(II) complex Cu(DAC)2+ (DAC = 1,8-bis(9-methylanthracyl)cyclam, cyclam = 1,4,8,11-tetraazacyclotetradecane), the N-nitrosylated ligand DAC-NO, and the Roussin's red salt ester (mu-S,mu-S')-protoporphyrin-IX-bis(2-thioethyl ester)tetranitrosyldiiron (PPIX-RSE). From the IM-MS data coupled with theoretical calculations, it was found that [Cu(II)(DAC - H)]+ exists as a single conformer, with one anthracenyl group above the cyclam and the other below, similar to the crystal structure of Cu(II)(DAC)2+. The metal-free N-nitrosylated ligand (DAC-NO + H)+ has two conformations: one family of structures has one anthracenyl group above the cyclam and one below, while the other has both anthracenyl groups on the same side of the cyclam. These observations are consistent with 1H NMR data for the neutral DAC-NO complex that indicate the presence of two geometric isomers in solution. The third species, PPIX-RSE, has a porphyrin chromophore covalently linked to an Fe2S2(NO)4 cluster for use as a precursor for the photochemical delivery of nitric oxide in single- and two-photon excitation processes. Ion mobility indicates the presence of two (PPIX-RSE + H)+ conformations, consistent with the previous interpretation of the bimodal fluorescence lifetime decay seen for PPIX-RSE. DFT structures, in good agreement with the IM-MS cross sections, indicate two "bent" conformations with the planes of the porphyrin and Fe2S2 rings at different angles with respect to each other.

Journal Article↗

PubMed2005

Pinning mass-selected Agn clusters on the TiO2(110)-1x1 surface via deposition at high kinetic energy.

We present the first scanning tunneling microscopy (STM) study of the deposition of mass-selected silver clusters (Ag(n),n=1, 2, 3) on a rutile TiO(2)(110)-1x1 surface at room temperature under hard-landing conditions. Under hard-landing conditions, only small features are observed on the surface in all cases without sintering or surface damage. This suggests that the high impact energy of the clusters mainly dissipates as thermal energy in the substrate, resulting in the recovery of any initial impact-induced surface damage and the formation of bound clusters on the surface near the impact point. STM images indicate that Ag(1) binds on the bridging oxygen rows twice as often as on the Ti rows. Density-functional Theory (DFT) calculations are consistent with Ag(1) binding at either bridging oxygen vacancies or with two adjacent bridging oxygen atoms in the same bridging oxygen row. STM images of Ag(2) and Ag(3) depositions indicate almost exclusive binding centered on the Ti-atom rows. DFT calculations suggest that the Ag(2) and Ag(3) clusters are bound between two bridging oxygen rows, which is consistent with the STM observations.

Journal Article↗

PubMed2005

Intact size-selected Au(n) clusters on a TiO2(110)-(1 x 1) surface at room temperature.

Experiments in which mass-selected gold clusters were deposited on a surface have found that the catalytic properties depend strongly on cluster size. However, these experiments have not established definitively that the clusters maintain their size after deposition. We report here work in which we deposit low kinetic energy, mass-selected Aun+ (n = 1-8) clusters on a rutile TiO2(1 x 1) surface and use ultrahigh vacuum scanning tunneling microscopy (UHV-STM) to determine their size and shape.

Journal Article↗

PubMed2005

Evolution of constrained gonadotropin-releasing hormone ligand conformation and receptor selectivity.

Gonadotropin-releasing hormone (GnRH) is the central regulator of reproduction in vertebrates. GnRHs have recently been identified in protochordates and retain the conserved N- and C-terminal domains involved in receptor binding and activation. GnRHs of the jawed vertebrates have a central achiral amino acid (glycine) that favors a type II' beta-turn such that the N- and C-terminal domains are closely apposed in binding the GnRH receptor. However, protochordate GnRHs have a chiral amino acid in this position, suggesting that they bind their receptors in a more extended form. We demonstrate here that a protochordate GnRH receptor does not distinguish GnRHs with achiral or chiral amino acids, whereas GnRH receptors of jawed vertebrates are highly selective for GnRHs with the central achiral glycine. The poor activity of the protochordate GnRH was increased >10-fold at vertebrate receptors by replacement of the chiral amino acid with glycine or a d-amino acid, which favor the type II' beta-turn. Structural analysis of the GnRHs using ion mobility-mass spectrometry and molecular modeling showed a greater propensity for a type II' beta-turn in GnRHs with glycine or a d-amino acid, which correlates with binding affinity at vertebrate receptors. These findings indicate that the substitution of glycine for a chiral amino acid in GnRH during evolution allows a more constrained conformation for receptor binding and that this subtle single amino acid substitution in a site remote from the ligand functional domains has marked effects on its structure and activity.

Amino Acid Sequence↗

PubMed2005

Probing the structure of gas-phase metallic clusters via ligation energetics: sequential addition of C2H4 to Agm+ (m=3-7).

A new method that utilizes ligation to probe geometries of clusters in the gas-phase has been developed. This technique bases structural assignments on thermodynamic quantities obtained for sequential ligand additions to a bare cluster. The information is obtained from temperature-dependent equilibrium data. This method is also sensitive to changes in bare cluster conformations that occur as a result of ligand addition, and the results can be fine-tuned by choosing ligands that appropriately adjust cluster-ligand binding energies.

Journal Article↗

PubMed2005

Structural analysis of metal interactions with the dinucleotide duplex, dCG x dCG, using ion mobility mass spectrometry.

The metal binding properties of the dinucleotide duplex, dCG x dCG, were analyzed in the gas phase with ion mobility mass spectrometry. Both MALDI and ESI were used to generate [M(dCG x dCG)]+ complexes. The collision cross section of each complex was measured in helium using ion mobility based methods and compared to calculated cross sections of theoretical structures. When metal cations classified as hard acids were combined with dCG x dCG, the [M(dCG x dCG)]+ complex organized into a globular structure. However, when soft acid metal cations were examined, a structure was observed where the two C-G base pairs were Watson-Crick bound.

Mass Spectrometry↗

PubMed2005

Amyloid beta-protein: monomer structure and early aggregation states of Abeta42 and its Pro19 alloform.

The amyloid beta-protein (Abeta) is a seminal neuropathic agent in Alzheimer's disease (AD). Recent evidence points to soluble Abeta oligomers as the probable neurotoxic species. Among the naturally occurring Abeta peptides, the 42-residue form Abeta42 is linked particularly strongly with AD, even though it is produced at approximately 10% of the levels of the more abundant 40-residue form Abeta40. Here, we apply mass spectrometry and ion mobility to the study of Abeta42 and its Pro19 alloform. The Phe19 --> Pro19 substitution blocks fibril formation by [Pro19]Abeta42. Evidence indicates that solution-like structures of Abeta monomers are electrosprayed and characterized. Unfiltered solutions of Abeta42 produce only monomers and large oligomers, whereas [Pro19]Abeta42 solutions produce abundant monomers, dimers, trimers, and tetramers but no large oligomers. When passed through a 10,000 amu filter and immediately sampled, Abeta42 solutions produce monomers, dimers, tetramers, hexamers, and an aggregate of two hexamers that may be the first step in protofibril formation. These results are consistent with recently published photochemical cross-linking data and lend support to recent aggregation mechanisms proposed by Bitan, Teplow, and co-workers [J. Biol. Chem. 2003, 278, 34882-34889].

Amino Acid Sequence↗

PubMed2005

Oxytocin-receptor binding: why divalent metals are essential.

Biologists have observed that the presence of divalent metal is essential for the binding of the hormone oxytocin (OT) to its cellular receptor. However, this interaction is not understood on the molecular level. Because conformation is a key factor controlling ligand binding in biomolecule systems, we have used ion mobility experiments and molecular modeling to probe the conformation of the oxytocin-zinc complex. Results show that Zn2+ occupies an octahedral site in the interior of the OT peptide that frees the N-terminus and creates a structured hydrophobic binding site on the peptide exterior; both factors are conducive to binding oxytocin to its receptor.

Cations, Divalent↗

PubMed2005

Landing of size-selected Agn+ clusters on single crystal TiO2 (110)-(1x1) surfaces at room temperature.

Mass-selected Ag(n) (+) (n=1,2,3) clusters with impact energy less than 2 eV per atom were deposited from the gas phase onto rutile titania (110)-(1x1) single crystal surfaces at room temperature and imaged using ultra-high vacuum scanning tunneling microscopy. Upon reaching the surface, Ag monomers sintered to form three-dimensional islands of approximately 50 atoms in size, with an average measured height of 7.5 A and diameter of 42 A. This suggests that the monomers are highly mobile on the titania surface at room temperature. Dimers also sintered to form large clusters upon deposition, approximately 30 atoms in size, with an average height of 6.2 A and diameter of 33 A. Clusters formed from monomer deposition appeared approximately three times more frequently at step edges than clusters formed from dimer deposition, indicating that the surface mobility of deposited monomers is higher than that of deposited dimers. In sharp contrast to the deposition of monomers and dimers, the deposition of trimers resulted in a high density of very small clusters on the order of a few atoms in size, indicative of intact trimers on the surface, implying that deposited trimers have very limited mobility on the surface at room temperature.

Journal Article↗

PubMed2005

Structural characterization of G-quadruplexes in deoxyguanosine clusters using ion mobility mass spectrometry.

The aggregation and conformation of deoxyguanosine (dG) in an ammonium acetate buffer solution were examined using mass spectrometry, ion mobility, and molecular mechanics/dynamics calculations. The nano-ESI mass spectrum indicated that 4 and 6 dGs cluster with 1 NH4+; 11 dGs with 2 NH4+; 14, 16, and 17 dGs with 3 NH4+; and 23 dGs with 4 NH4+. The collision cross sections with helium were measured and compared with calculated cross sections of theoretical structures generated by molecular mechanics/dynamics calculations. Three distinct arrival time distribution (ATD) peaks were observed for (4dG + NH4)+. One peak was assigned to the quadruplex structure of (4dG + NH4)+, while the other two peaks corresponded to the quadruplex structures of (8dG + 2NH4)2+ and (12dG + 3NH4)3+, all with the same m/z. Four ATD peaks were observed for (6dG + NH4)+ and assigned to the globular structure of (6dG + NH4)+, and the quadruplex structures of (12dG + 2NH4)2+, (18dG + 3NH4)3+, and (24dG + 4NH4)4+. Two ATD peaks were observed for (11dG + 2NH4)2+ and assigned to the quadruplex structures of (11dG + 2NH4)2+ and (22dG + 4NH4)4+. All of the other clusters in the mass spectrum (14, 16, and 17 dGs with 3 NH4+ and 23 dGs with 4 NH4+) only had one peak in their ATDs and in all cases the theoretical structures in a quadruplex arrangement agreed with the experimental cross sections. These results provide compelling evidence that quadruplexes are present in solution and retain their structure during the spray process, dehydration, and detection.

Deoxyguanosine↗