PubMed Health⌕ Search

Biomedical subjects

Michael Y Ogawa

Publications and source records attributed to Michael Y Ogawa.

9 recordsLinked to original sources
PubMed2006

Incorporating electron-transfer functionality into synthetic metalloproteins from the bottom-up.

The alpha-helical coiled-coil motif serves as a robust scaffold for incorporating electron-transfer (ET) functionality into synthetic metalloproteins. These structures consist of a supercoiling of two or more aplha helices that are formed by the self-assembly of individual polypeptide chains whose sequences contain a repeating pattern of hydrophobic and hydrophilic residues. Early work from our group attached abiotic Ru-based redox sites to the most surface-exposed positions of two stranded coiled-coils and used electron-pulse radiolysis to study both intra- and intermolecular ET reactions in these systems. Later work used smaller metallopeptides to investigate the effects of conformational gating within electrostatic peptide-protein complexes. We have recently designed the C16C19-GGY peptide, which contains Cys residues located at both the "a" and "d" positions of its third heptad repeat in order to construct a nativelike metal-binding domain within its hydrophobic core. It was shown that the binding of both Cd(II) and Cu(I) ions induces the peptide to undergo a conformational change from a disordered random coil to a metal-bridged coiled-coil. However, whereas the Cd(II)-protein exists as a two-stranded coiled-coil, the Cu(I) derivative exists as a four-stranded coiled-coil. Upon the incorporation of other metal ions, metal-bridged peptide dimers, tetramers, and hexamers are formed. The Cu(I)-protein is of particular interest because it exhibits a long-lived (microsecond) room-temperature luminescence at 600 nm. The luminophore in this protein is thought to be a multinuclear CuI4Cys4(N/O)4 cage complex, which can be quenched by exogenous electron acceptors in solution, as shown by emission-lifetime and transient-absorption experiments. It is anticipated that further investigation into these systems will contribute to the expanding effort of bioinorganic chemists to prepare new kinds of functionally active synthetic metalloproteins.

Amino Acid Sequence↗
PubMed2005

Cu(I) luminescence from the tetranuclear Cu4S4 cofactor of a synthetic 4-helix bundle.

The addition of Cu(I) to the random-coil peptide, C16C19-GGY, produces a self-organized, metal-bridged 4-helix bundle which displays an intense room-temperature luminescence at 600 nm. Emission, UV, and CD titrations along with X-ray absorption studies indicate that the luminescent cofactor is likely a Cu4S4 cluster in which each Cu atom is bridged by the side chains of two cysteine residues and has terminal N/O ligation.

Amino Acid Sequence↗
PubMed2004

Metal-peptide nanoassemblies.

A new class of metal-peptide nanoassemblies has been prepared by combining the principles of supramolecular coordination chemistry with those of de novo protein design.

Binding Sites↗
PubMed2004

Metal-induced folding of a designed metalloprotein.

The metal-induced assembly of a designed peptide-based rubredoxin model is described. The C16C19-GGY peptide has the sequence Ac-K(IEALEGK)(2)(CEACEGK)(IEALEGK)GGY-amide in which the presence of the Cys-X-X-Cys metal binding domain of rubredoxin was used to place cysteine residues at the hydrophobic "a" and "d" positions upon formation of a homodimeric alpha-helical coiled-coil. Circular dichroism spectroscopy shows that the apopeptide exists as a random coil and assembles into a coiled-coil in the presence of Cd(2+). Metal binding is monitored by the appearance of a new LMCT band at 238 nm. UV-Vis titrations and SDS-PAGE experiments are used to show that this designed metalloprotein exists as a metal-bridged coiled-coil dimer.

Amino Acid Sequence↗
PubMed2003

Peptide-protein interactions: photoinduced electron-transfer within the preformed and encounter complexes of a designed metallopeptide and cytochrome c.

Photoinduced electron-transfer (ET) occurs between a negatively charged metallopeptide, [Ru(bpy)(2)(phen-am)-Cys-(Glu)(5)-Gly](3-) = RuCE(5)G, and ferricytochrome c = Cyt c. In the presence of Cyt c, the triplet state lifetime of the ruthenium metallopeptide is shortened, and the emission decays via biexponential kinetics, which indicates the existence of two excited-state populations of ruthenium peptides. The faster decay component displays concentration-independent kinetics demonstrating the presence of a preformed peptide-protein complex that undergoes intra-complex electron-transfer. Values of K(b) = (3.5 +/- 0.2) x 10(4) M(-1) and k(obs)(ET)= (2.7 +/- 0.4) x 10(6) s(-1) were observed at ambient temperatures. The magnitude of k(obs)(ET) decreases with increasing solvent viscosity, and the behavior can be fit to the expression k(obs)(ET) proportional to eta(-alpha) to give alpha = 0.59 +/- 0.05. The electron-transfer process occurring in the preformed complex is therefore gated by a rate-limiting configurational change of the complex. The slower decay component displays concentration-dependent kinetics that saturate at high concentrations of Cyt c. Analysis according to rapid equilibrium formation of an encounter complex that undergoes unimolecular electron-transfer yields K(b)' = (2.5 +/- 0.7) x 10(4) M(-1) and k(obs')(ET)= (7 +/- 3) x 10(5) s(-1). The different values of k(obs)(ET) and k(obs')(ET) suggest that the peptide lies farther from the heme when in the encounter complex. The value of k(obs')(ET) is viscosity dependent indicating that the reaction occurring within the encounter complex is also configurationally gated. A value of alpha = 0.98 +/- 0.14 is observed for k(obs')(ET), which suggests that the rate-limiting gating processes in the encounter complex is different from that in the preformed complex.

Binding Sites↗
PubMed2003

Photoinduced electron-transfer along alpha-helical and coiled-coil metallopeptides.

A peptide-based electron-transfer system has been designed in which the specific positions of redox-active metal complexes appended to either an alpha-helix, or an alpha-helical coiled-coil, can be reversed to test the effect of the helix dipole in controlling photoinduced electron-transfer rates. Two 30-residue apopeptides were prepared having the following sequences: (I) Ac-K-(IEALEGK)(ICALEGK)(IEALEHK)(IEALEGK)-G-amide, and (II) Ac-K-(IEALEGK)(IHALEGK)-(IEALECK)(IEALEGK)-G-amide. Each apopeptide was reacted first with [Ru(bpy)2(phen-ClAc)]2+, where bpy = 2,2'-bipyridine and phen-ClAc = 5-chloroacetamido-1,10-phenanthroline, to attach the ruthenium polypyridyl center to the cysteine side-chain of the polypeptide. The isolated products were then reacted with [Ru(NH3)5(H2O)]2+ to yield the binuclear electron-transfer metallopeptides ET-I and ET-II. In these systems, electron-transfer occurred from the photoexcited ruthenium polypyridyl donor to the pentammine ruthenium (III) acceptor such that the electron-transfer occurred toward the negative end of the helix dipole in ET-I, and toward the positive end in ET-II. Circular dichroism spectroscopy showed that both peptides exist as dimeric alpha-helical coiled-coils in 100 mM phosphate buffer at pH 7, and as monomeric alpha-helices in the lower dielectric solvents 2,2,2-trifluoroethanol, and a 1:1 (v/v) mixture of CH2Cl2 and 2,2,2-trifluoroethanol. The peptides were predominately (i.e., 65-72%) alpha-helical in these solvents. The emission lifetime behavior of ET-I was seen to be identical to that of ET-II in each of the three solvents: no evidence for directional electron-transfer rates was observed. Possible reasons for this behavior are discussed.

Amino Acid Sequence↗
PubMedDate not supplied

Site-specific modification of de novo designed coiled-coil polypeptides with inorganic redox complexes.

A stepwise procedure for preparing of site-specific binuclear metallopeptides is described. The modification procedure involves the alkylation of a cysteine side chain by reaction with [Ru(bpy)(2)(phen-ClA)](2+), where bpy = 2,2'-bipyridine and phen-ClA = 5-chloroacetamido-1,10-phenanthroline, followed by the coordination of a ruthenium pentammine complex to a histidine residue located elsewhere along the sequence. The apo and metalated versions of the peptides C10H21(30-mer) and H10C21(30-mer) display circular dichroism spectra having minima at 208 and 222 nm, with theta(222)/theta(208) = 1.04 to indicate that these peptides exist as alpha-helical coiled-coils in aqueous solution. When the ruthenium polypyridyl complex is attached to C10H21(30-mer), the Delta-l and Lambda-l diastereomers of the resulting metallopeptide can be readily separated from each other by reversed-phase HPLC. However, in the case of the related H10C21(30-mer) metallopeptide, the two diastereomers cannot be chromatographically resolved. These results indicate how the subtle interplay between peptide conformation/sequence and metal complex geometry may alter some of the physical characteristics of metallopeptides.

Chemical Phenomena↗