Biomedical subjects

Michel Vert

Publications and source records attributed to Michel Vert.

18 recordsLinked to original sources

PubMed2006

Synthesis of an X-ray opaque biodegradable copolyester by chemical modification of poly (epsilon-caprolactone).

Poly (epsilon-caprolactone-co-alpha-iodo-epsilon-caprolactone) was synthesized by binding iodine to PCL chain bearing carbanionic site on alpha-position of carbonyl groups using lithium diisopropylamide. Copolyesters containing from 10% to 25% of iodo-units were thus obtained. Viscoelastic properties (modulus, loss angle), thermal properties (T(m), T(c), DeltaH(m)), crystallinity and in vitro degradability of this new type of copolymers were measured. Their opacity to X-rays was assessed, and appeared high enough to be of interest for biomedical applications.

Biocompatible Materials↗

PubMed2006

PLA stereocopolymers as sources of bioresorbable stents: preliminary investigation in rabbit.

The aim of the present work was to evaluate whether the degradation of PLA-based bioresorbable stents can be modulated via the configuration of repeating units as it is the case in other applications like osteosynthesis. The first obstacle was finding a stent design that could allow implantation in the aorta of a rabbit taken as a model of a human coronary artery. In the absence of guidelines other than those tentatively proposed in patents, several simple designs were considered that allowed us to evaluate the fate of the stents made of poly(lactic acid) stereocopolymers with L/(L + D) ratio of 0.92 (PLA92) and 0.50 (PLA50) up to 6 months post in vivo implantation. Our findings show the feasibility of bioresorbable stenting using PLA stereocopolymers and that PLA50 degraded faster than PLA92. Therefore, using stereocopolymers appears as a means to vary the degradation rate and adapt it to the artery remodelling process that is very much dependent on the release of the stenting stress protection.

Animals↗

PubMed2005

Synthesis and rheological properties of polylactide/poly(ethylene glycol) multiblock copolymers.

Ring-opening polymerization of D,L-lactide was carried out in the presence of poly(ethylene glycol), using Zn powder as catalyst. The hydroxyl-capped PLA-PEG-PLA triblock copolymers were coupled with adipoyl chloride at different molar ratios under mild conditions. N-Dimethylaminopyridine (DMAP) was used as catalyst of the coupling reaction. The resulting PLA/PEG multiblock copolymers were characterized by various analytical techniques such as IR, 1H NMR, SEC, and DSC. Sol-gel transition properties of the multiblock copolymers were investigated by mechanical rheology. The data showed that the sol-gel transition temperature and the transition modulus increased with increasing molecular weight and the solution concentration of the multiblock copolymers. [Graph: see text] Variation of storage modulus (G') and loss modulus (G'') as a function of temperature for a 20% sample of MB3.

Adipates↗

PubMed2005

Polyelectrolyte complex formation and stability when mixing polyanions and polycations in salted media: a model study related to the case of body fluids.

Controlled drug delivery and gene transfection involve contact of artificial polyelectrolytic systems that can interact dramatically with biopolymers and cells when they are introduced in blood. Given the complexity of body aqueous media in terms of physical chemistry, a model approach was selected in attempt to understand the behavior of artificial polyelectrolytes introduced in body fluids. Selection in terms of molecular weight was highlighted in a previous paper. In the present study the formation and the stability of fractions obtained when a polycation is added to a polyanion according to a titrating process mimicking injection into blood was considered for different polycation/polyanion couples. Poly(amino serinate) and poly(L-lysine) were used as polybases, and poly(acrylic acid), poly(L-lysine citramide) and poly(L-lysine citramide imide) as polyacids. Four fractions corresponding to different positive/negative charge ratios were formed for each couple. At low polyion concentration (13 mg/L) and given salt concentration, the stability of the complex fractions depended on molecular weight and charge density of the polyions. The NaCl concentration required to destabilize the different interpolyelectrolyte complexes was found to decrease from the first fraction to the fourth one. Upon decreasing the salt concentration, macroscopic flocculation occurred in the case of PLL/PAA complex fractions only. For the other couples, dynamic light scattering showed that several hundreds nanometer sized particles were formed that were stable in a broad range of NaCl concentration, including the physiological 0.15 ionic strength. At higher polyion concentrations, stable solid precipitate was formed regardless of the system. The absence of flocculation in the case of highly diluted poly(L-lysine citramide) and poly(L-lysine citramide imide) polyanions in salted media is assigned to the presence of non-ionic hydroxyl and amide polar groups along the complexed chains. Data show that introducing non-ionic functions along the polyelectrolyte chains is a good means to keep interpolyelectrolyte complexes dispersed in salted media, a conclusion of interest in the field of condensation of genes by polycations.

Body Fluids↗

PubMed2005

Human skin cell cultures onto PLA50 (PDLLA) bioresorbable polymers: influence of chemical and morphological surface modifications.

Poly(alpha-hydroxy acid)s derived from lactic and glycolic acid are bioresorbable polymers which can cover a large range of thermal, physical, mechanical, and biological properties. Human keratinocytes have been shown as able to grow on a poly(DL-lactic acid) film. However the keratinocyte growth was delayed with respect to culture on standard tissue culture polystyrene, even though the same plateau level was observed after 2 weeks. In order to improve the performance of poly(DL-lactic acid) films as skin culture support, their surface was modified by creating tiny cavities using a method based on the leaching out of poly(ethylene oxide) from poly(lactic acid)-poly(ethylene oxide) heterogeneous blends. The surface of the films was also chemically modified by alkaline attack with sodium hydroxide and by type-I collagen coating. Murine fibroblast cell line and primary cultures of human fibroblasts and of two types of keratinocytes were allowed to adhere and to grow comparatively on the different films. The presence of cavities affected neither the adhesion of dermal fibroblasts nor that of keratinocytes. Only keratinocyte proliferation was significantly reduced by the presence of cavities. Collagen coating improved skin cell adhesion and proliferation as well, except in the case of murine fibroblasts. In the case of the NaOH treatments, similar trends were observed but their extent depended on the treatment time. In the case of chemical modifications, fluorescence microscopy bore out adhesion and proliferation tendencies deduced from MTT tests.

Biocompatible Materials↗

PubMed2004

Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of epsilon-caprolactone in the presence of poly(ethylene glycol).

Poly(epsilon-caprolactone) (PCL) and its block copolymers with poly(ethylene glycol) (PEG) were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of ethylene glycol or PEG, using zinc metal as catalyst. The resulting polymers were characterized by various analytical techniques such as (1)H NMR, SEC, DSC, IR, X-ray, ESEM, and CZE. PCL/PEG copolymers with long PCL chains presented the same crystalline structure as PCL homopolymer, whereas PEG-bearing short PCL blocks retained the crystalline structure of PEG and exhibited an amphiphilic behavior in aqueous solutions. Degradation of PCL and PCL/PEG diblock and triblock copolymers was realized in a 0.13 M, pH 7.4 phosphate buffer at 37 degrees C. The results indicated that the copolymers exhibited higher hydrophilicity and degradability compared with the PCL homopolymer. Large amounts of PEG were released from the bulk after 60 weeks' degradation. In vitro cell culture studies were conducted on scaffolds manufactured via solid free form fabrication by using primary human and rat bone marrow derived stromal cells (hMSC, rMSC). Light, scanning electron, and confocal laser microscopy, as well as immunocytochemistry, showed cell attachment, proliferation, and extracellular matrix production on the surface, as well as inside the scaffold architecture. Copolymers showed better performance in the cell culture studies than the PCL homopolymer.

Animals↗

PubMed2004

Lactic acid-based functionalized polymers via copolymerization and chemical modification.

Poly(lactic acid) polymers (PLA) are presently the most attractive compounds in the field of artificial degradable and biodegradable polymers. In order to enlarge the family, and thus the range of accessible properties, stereocopolymers and copolymers with various co-monomers have been synthesized. However, very few are functionalized, i.e. include functional groups attached to the main chains or as part of the side chains. In the search for degradable PLA-type polymers bearing functional groups to serve as intermediates for further chemical modifications, we are exploring two different routes. The first one is copolymerization with a protected hydroxyl-bearing lactide-type monomer, namely 3-(1,2,3,4-tetraoxobutyldiisopropylidene)dioxane-2,5-dione. The second route consists of the formation of a carbanionic site in the alpha-position to intrachain carbonyl functions by using lithium N,N-diisopropylamide followed by the coupling of electrophiles. Recent advances in this search are presented using several examples. In particular, it is shown that OH-functionalized PLA-type macromolecules can be made fluorescent by chemical coupling. It is also shown that substituents can be attached to PLA-type macromolecules in solution or to the surface of PLA-based devices selectively.

Biodegradation, Environmental↗

PubMed2004

Norfloxacin-poly(L-lysine citramide imide) conjugates and structure-dependence of the drug release.

Norfloxacin (Nflx), an antibiotic which is active against some intracellular bacteria, was coupled to a polymeric carrier, namely poly(L-lysine citramide) via a lysine or an ethylcarbamate spacer to obtain a macromolecular prodrug. The carrier, which derived from the two metabolites citric acid and L-lysine, is known to be biocompatible and slowly degradable under slight acidic conditions. Conjugates were characterised by UV, 1H and 13C NMR and SEC. The presence of Norfloxacin and the lysine type spacer caused chain aggregation, due to a probable physical cure. The release of Norfloxacin from these prodrugs and from a prodrug where Norfloxacin is bound to the carrier backbone without spacer arm was investigated comparatively in vitro. Conjugation via a carbamate-type linkage appeared as a method to achieve the release of Norfloxacin from a PLCA-type conjugate at neutral.

Drug Carriers↗

PubMed2003

A physico-chemical approach of polyanion-polycation interactions aimed at better understanding the in vivo behaviour of polyelectrolyte-based drug delivery and gene transfection.

Polyanions and polycations are known to interact electrostatically and form soluble or insoluble polyelectrolyte complexes. Body fluids, blood and cells are composed of many polyelectrolytic systems such as proteins, glycoproteins, poly(glycosamino glycane)s, polynucleotides, etc. under physiological conditions. Nowadays synthetic polyelectrolytes are proposed as carriers of bioactive compounds, such as drugs and genes, and are thus to be injected into body fluids. For the sake of better understanding the complex behaviour of such artificial polyelectrolytic systems in the pool of natural polyelectrolytes forming living systems, interactions of bi- and multi-components mixtures of synthetic polyanions with the same synthetic polycation, namely poly[(dimethylaminoethyl) methacrylate], HCl, were investigated under the conditions imposed by physiological media, namely pH = 7.4, ionic strength mu = 0.15 and T = 37 degrees C. The selected artificial polyanions were the sodium salts of poly(acrylic acid), poly(methacrylic acid), poly(L-lysine citramide) and poly(styrene sulfonic acid) which have different acid strength, charge density and ionogenic group. The influence of ionic strength and pH on complex formation and stability was investigated by turbidimetry at lambda = 520 nm. Phase separation occurred regardless of ionic strength in the case of sodium polystyrene sulfonate. For the other polyanions, redissolution was observed at critical NaCl concentrations much higher than the physiological ionic strength. In the case of mixtures of two or three polyanions with the polycation, the complex formation appeared polyanion-selective at physiological ionic strength. Data are discussed with regard to phenomena that can occur in vivo.

Acrylic Resins↗

PubMed2002

Influence of polymerization conditions on the hydrolytic degradation of poly(DL-lactide) polymerized in the presence of stannous octoate or zinc-metal.

Laboratory- and pilot-scale racemic polylactides (PLA50) were synthesized in the presence of stannous octoate (SnOct2) or zinc-metal as initiators in the absence of alcohol. The resulting polymers were processed by compression molding or injection molding depending on the batch scale. The hydrolytic degradation of compression-molded samples selected to be comparable was investigated first in order to show the influence of the initiator system. Differences in water uptake were found between PLA50-Zn (zinc-metal initiation) and PLA50-Sn (SnOct2 initiation). PLA50-Zn being much more hydrophilic. PLA50-Sn exhibited a slower molecular weight decrease and delayed onsets of weight loss, release of acidity and stereocomplex formation, with respect to PLA-Zn. The concentration in residual tin in PLA50-Sn increased from 306 to 795 ppm during aging. In the case of PLA50-Zn the residual metal remains constant at ca. 40 ppm. In a second series of experiments, high molecular weight PLA50 different in characteristics and in initiator, synthesized under pilot-scale, were compared. The effects of the initiator on the degradation of the polymers well agreed with laboratory-scale findings, differences in hydrophobicity being enlarged by the up scaling. PLA50-Sn polymers appeared much more degradation resistant than PLA50-Zn ones. Contributions of the other characteristics (e.g. molecular weight, purity, stereoregularity, processing) were shown to be important as well.

Absorption↗

PubMed2002

Hydrolytic and enzymatic degradations of physically crosslinked hydrogels prepared from PLA/PEO/PLA triblock copolymers.

Degradable copolymers were synthesized by ring opening polymerization of lactide in the presence of poly(ethylene glycol) (PEG), using CaH2 as a biocompatible initiator. The resulting PLA/PEO/PLA triblock copolymers were dissolved in a biocompatible solvent, namely tetraglycol. Physically crosslinked hydrogels were then prepared by introducing small amounts of water into the thus obtained solutions. Hydrolytic degradation of the highly swollen hydrogels was realized in 0.13 M pH=7.4 phosphate buffer, while the enzymatic degradation was carried out in 0.05 M pH=8.6 Tris buffer containing a PLA-degrading enzyme, proteinase K. In both cases, degradation was initially very fast with dramatic weight loss. The LA/EO ratio of the remaining material increased rapidly, in agreement with the release of PEO-rich segments. In a second phase, the degradation rate slowed down. The presence of proteinase K strongly accelerated the degradation rate of the hydrogels, indicating that the enzyme was able to penetrate inside and attack the PLA domains which constituted nanometric nodes in the gel network.

Journal Article↗

PubMed2002

Biocompatibility of polycations: in vitro agglutination and lysis of red blood cells and in vivo toxicity.

The effects of six polycations were studied in vitro on red blood cells (RBC) and in vivo after intravenous administration. Hemagglutination and hemolysis depended not only on the molar mass and the concentration of these polycations, but also on their chemical nature. The hemagglutination and hemolysis induced by poly(L-lysine), diethylaminoethyldextran, poly(dimethyldiallylammonium) chloride and poly[2-(dimethylamino)ethyl methacrylate] was low to moderate, whereas a severe hemolysis was induced by a partially quaternized poly[thio-1-(N,N-diethyl-aminoethyl)ethylene]. In the case of poly(epsilon-lysine), no significant hemagglutination nor hemolysis was observed. The presence of plasma proteins reduced both agglutination and hemolysis. This protective effect was enhanced when the polycations interacted with plasma proteins before contact with RBC. In the presence of albumin, the behavior depended on the polycation and on the order of addition of the three components of the suspension, namely albumin, polycation and RBC. Depending on the polycation, albumin-polycation complexes were either less active or more active on RBC than the same polycation in protein-free medium. In vivo the studied polycations induced an immediate mortality except poly(epsilon-lysine), which induced a delayed mortality. The minimal dose of polycations inducing immediate mortality paralleled their effect on RBC.

Animals↗

PubMed2002

Growth of various cell types in the presence of lactic and glycolic acids: the adverse effect of glycolic acid released from PLAGA copolymer on keratinocyte proliferation.

Poly(alpha-hydroxy-acid)s derived from lactic acid (LA) and glycolic acid (GA) are bioresorbable polymers that are currently used in human surgery and in pharmacology to make temporary therapeutic devices. Nowadays, increasing attention is paid to these polymers in the field of tissue engineering. However, the literature shows that a large number of factors can affect many of their properties and the responses of biological systems. As part of our investigation of the biocompatibility of degradable aliphatic polyesters, the effects of LA and GA on the proliferation of various cells under in vitro cell culture conditions were studied. The release of LA and GA from films made of a copolymer synthesized by the zinc lactate method and composed of 37.5% L-lactyl, 37.5% D-lactyl, and 25% glycolyl repeating units was first investigated over a period of 30 days under abiotic conditions in a cell culture medium in order to identify a range of acid concentrations consistent with releases to be expected in real cell cultures. Four cell lines, namely 3T3-J2, C3H10(1/2), A431, and HaCat, and three primary cell cultures, namely rat endothelial cells, rat smooth muscle cells, and human dermal fibroblasts, were then allowed to grow in the presence of LA and GA at various concentrations taken within the selected 10-1000 mg/cm3 range. Little or no effect was observed on the proliferation of all cells except human keratinocytes, whose growth was dramatically inhibited by GA at concentrations as low as 10 mg/cm3. The inhibiting effect of GA was confirmed by considering the growth of keratinocytes on films made of the same copolymer, in comparison with poly(DL-lactic acid) and polystyrene taken as references. This work shows that GA-releasing degradable matrices are not adapted to the culture of keratinocytes with the aim of making skin grafts.

Animals↗

PubMedDate not supplied

Enzymatic degradation of block copolymers prepared from epsilon-caprolactone and poly(ethylene glycol).

Block copolymers were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of monohydroxyl or dihydroxyl poly(ethylene glycol) (PEG), using Zn powder as catalyst. The resulting poly(epsilon-caprolactone) (PCL)-PEG diblock and PCL-PEG-PCL triblock copolymers were characterized by various analytical techniques such as NMR, size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Both copolymers were semicrystalline polymers, the crystalline structure being of the PCL type. Films were prepared by casting dichloromethane solutions of the polymers on a glass plate. Square samples with dimensions of 10 x 10 mm were allowed to degrade in a pH = 7.0 phosphate buffer solution containing Pseudomonas lipase. Data showed that the introduction of PEG blocks did not decrease the degradation rate of poly(epsilon-caprolactone).

Biodegradation, Environmental↗

PubMedDate not supplied

Lipase-catalyzed biodegradation of poly(epsilon-caprolactone) blended with various polylactide-based polymers.

Poly(epsilon-caprolactone) was blended with various polylactide-based polymers and processed to films by the solution casting method. Blends of 25/75, 50/50, 75/25, 90/10, and 95/5 (w/w) poly(epsilon-caprolactone)/poly(l-lactide), a 95/5 (w/w) blend of poly(epsilon-caprolactone) with a poly(d-lactide), a 50/50 (w/w) poly(l-lactide)-poly(d-lactide) mixture, and a poly(l-lactide-co-epsilon-caprolactone) copolymer were considered comparatively. The various phase-separated films were allowed to degrade in the presence of Pseudomonas lipase, biodegradation being monitored by proton nuclear magnetic resonance, size exclusion chromatography, differential scanning calorimetry, X-ray diffraction, and environmental scanning electron microscopy. The formation of separated phases during solvent evaporation and their morphologies are discussed. The introduction of poly(l-lactide) dramatically decreased the degradation rate of poly(epsilon-caprolactone)/poly(l-lactide) blends. The higher the percentage of poly(l-lactide), the slower the degradation, while the presence of cracks and increasing the lipase concentration acted in favor of the enzymatic degradation. Long-term enzymatic degradation of the various 95/5 blends was investigated over 480 h. The poly(epsilon-caprolactone) phase was enzymatically degraded by the lipase regardless of the blend type, the degradation rate depending on the nature of the co-components.

Biodegradation, Environmental↗

PubMedDate not supplied

Structure-property relationships of copolymers obtained by ring-opening polymerization of glycolide and epsilon-caprolactone. Part 2. Influence of composition and chain microstructure on the hydrolytic degradation.

A series of glycolide/epsilon-caprolactone copolymers were compression molded and allowed to degrade in a pH 7.4 phosphate buffer at 37 degrees C. Degradation was monitored by various analytical techniques such as (1)H NMR, X-ray diffraction, DSC, CZE, ESI-MS, and inherent viscosity measurements. The results show that the degradation rate depends not only on the copolymer composition but also on its chain microstructure. Generally, copolymers with a higher C-G bond content or a higher degree of randomness exhibit higher degradation rates. Sequences with odd numbers of glycolyl units such as -CGC- and -CGGGC-, which result from the second mode transesterification, appear more resistant to hydrolysis. As a consequence, degradation residues obtained at the later stages of degradation are mainly composed of long glycolyl and caproyl sequences linked by -CGC- and -CGGGC- ones. The degradation rate of the copolymers depends also on the degree of crystallinity of each component which is related to the block length. The caproyl component can be preferentially degraded if it is in the amorphous state and the glycolyl component is semicrystalline.

Caproates↗

PubMedDate not supplied

Structure-property relationships of copolymers obtained by ring-opening polymerization of glycolide and epsilon-caprolactone. Part 1. Synthesis and characterization.

A series of copolymers with various compositions were synthesized by bulk ring-opening polymerization of glycolide and epsilon-caprolactone, using stannous (II) octoate or zirconium (IV) acetylacetonate as initiator. Reaction time and temperature were varied so as to induce different chain microstructures. The resulting copolymers were characterized by (1)H NMR, SEC, DSC, and X-ray diffraction. The average lengths of glycolyl (L(G)) and caproyl sequences (L(C)) and the degree of randomness (R) were calculated and compared to the values of completely random chains. The concentration of CGC sequences was also obtained which resulted from transesterification reactions. Data showed that stannous (II) octoate leads to less transesterification than zirconium (IV) acetylacetonate, and lower temperatures lead to less transesterification than higher ones. The copolymers exhibited a more or less blocky chain structure because of the reactivity difference between glycolide and epsilon-caprolactone. The crystalline structure and thermal properties depend on both the composition and the chain microstructure. PGA- and PCL-type crystallites were obtained for copolymers with intermediate compositions.

Caproates↗

PubMedDate not supplied

Aliphatic polyesters: great degradable polymers that cannot do everything.

Nowadays the open and the patent literatures propose a large number of polymers whose main chains can be degraded usefully. Among these degradable polymers, aliphatic polyester-based polymeric structures are receiving special attention because they are all more or less sensitive to hydrolytic degradation, a feature of interest when compared with the fact that living systems function in aqueous media. Only some of these aliphatic polyesters are enzymatically degradable. A smaller number is biodegradable, and an even more limited number is biorecyclable. To be of practical interest, a degradable polymer must fulfill many requirements that depend very much on the targeted application, on the considered living system, and on living conditions. It is shown that aliphatic polyester structures made of repeating units that can generate metabolites upon degradation or biodegradation like poly(beta-hydroxy alkanoate)s and poly(alpha-hydroxy alkanoate)s are of special interest. Their main characteristics are confronted to the specifications required by various potential sectors of applications, namely, surgery, pharmacology, and the environment. It is shown that degradation, bioresorption, and biorecycling that are targets when one wants to respect living systems are also drastic limiting factors when one wants to achieve a device of practical interest. Finding a universal polymer that would be the source of all the polymeric biomaterials needed to work in contact with living organisms of the various life kingdoms and respect them remains a dream. On the other hand, finding one polymeric structure than can fulfill the requirements of one niche application remains a big issue.

Biocompatible Materials↗