Biomedical subjects

Michele Laus

Publications and source records attributed to Michele Laus.

11 recordsLinked to original sources

PubMed2006

Enhanced antisense effect of modified PNAs delivered through functional PMMA microspheres.

Peptide nucleic acids (PNA) are very promising antisense agents, but their in vivo application is often hampered by their low bioavailability, mainly due to their limited uptake through cellular and nuclear membranes. However, PNA chemical synthesis easily allows modification with functional structures able to improve the intrinsically low permeability and great interest is arising in finding specific and efficient delivery protocols. Polymeric core-shell microspheres with anionic functional groups on the surface were tested for their ability to reversibly bind lysine modified PNA sequences, whose antisense activity against COX-2 mRNA was already demonstrated in murine macrophages.

Acrylic Resins↗

PubMed2006

DNA prime and protein boost immunization with innovative polymeric cationic core-shell nanoparticles elicits broad immune responses and strongly enhance cellular responses of HIV-1 tat DNA vaccination.

Novel biocompatible core-shell cationic nanoparticles, composed of an inner hard core of poly(methylmethacrylate) (PMMA) and a hydrophilic tentacular shell bearing positively charged groups and poly(ethyleneglycol) chains covalently bound to the core, were prepared by emulsion polymerization and characterized in vitro and in vivo for DNA vaccine applications. The nanoparticles reversibly adsorbed large amounts of DNA, mainly through electrostatic interactions, preserved its functional structure, efficiently delivered it intracellularly, and were not toxic in vitro or in mice. Furthermore, two intramuscular (i.m.) immunizations (4 weeks apart) with a very low dose (1 microg) of the plasmid pCV-tat delivered by these nanoparticles followed by one or two protein boosts induced significant antigen-specific humoral and cellular responses and greatly increased Th1-type T cell responses and CTLs against HIV-1 Tat.

AIDS Vaccines↗

PubMed2005

Comparison of novel delivery systems for antisense peptide nucleic acids.

Peptide nucleic acids (PNAs) provide a powerful tool to study the mechanism of transcription and translation, an innovative strategy to regulate target gene expression. They have been successfully used in antisense technology, for their ability to specifically bind to messenger RNA (mRNA) targets and to inhibit translation of the target genes. However, unlike most of the DNA and RNA oligonucleotides, PNAs are poorly penetrated through the cell membrane, partially due to their uncharged property. To enhance the efficiency in PNA delivery, many strategies have been explored. We here compare the efficacy of three different delivery strategies for antisense PNA: 1) conjugation to hydrophobic peptides, 2) adsorption onto polymeric microspheres and 3) encapsulation in autologous erythrocytes. To this purpose, we designed and prepared PNA sequences able to inhibit the expression of macrophage enzymes involved in inflammatory process, i.e. nitric oxide synthase (iNOS) and cyclooxygenase 2 (COX-2) and tested their antisense activity in a murine macrophage cellular model. Both delivery through polymeric microspheres and encapsulation into erythrocytes allowed the antisense activity of unmodified PNAs at nanomolar concentration.

Animals↗

PubMed2005

Core-shell microspheres by dispersion polymerization as promising delivery systems for proteins.

Functional poly(methyl methacrylate) core-shell microspheres were prepared by dispersion polymerization. An appropriate selection of experimental parameters and in particular of the initiator and stabilizer amount and of the medium solvency power allowed a monodisperse sample as large as 600 nm to be prepared. To this purpose, low initiator concentration, high steric stabilizer amount and a low solvency power medium were employed. The microspheres present a core-shell structure in which the outer shell is constituted by the steric stabilizer which affords carboxylic groups able to interact with basic proteins, such as trypsin, whose adsorption is essentially driven by the carboxylic group density in the microsphere shell. Finally, fluorescent microspheres were prepared for biodistribution studies and shown to be readily taken up by the cells both in vitro and in vivo. These results suggest that these microspheres are promising delivery systems for the development of novel protein-based vaccines.

Acrylic Resins↗

PubMed2004

Novel biocompatible anionic polymeric microspheres for the delivery of the HIV-1 Tat protein for vaccine application.

Two novel classes of biocompatible core-shell anionic microspheres, composed of an inner hard insoluble core, either made of poly(styrene) (PS) or poly(methyl methacrylate) (PMMA), and a soft outer tentacular shell made of long soluble negatively charged arms derived from the steric stabilizer, hemisuccinated poly(vinyl alcohol) or Eudragit L100/55, respectively, were prepared by dispersion polymerization and characterized. Five types of these novel microspheres, two made of poly(styrene) and hemisuccinated poly(vinyl alcohol) (A4 and A7), and three made of poly(methyl methacrylate) and Eudragit L100/55 (1D, 1E, H1D), differing for chemical composition, size, and surface charge density were analyzed for the delivery of the HIV-1 Tat protein for vaccine applications. All microspheres reversibly adsorbed the native biologically active HIV-1 Tat protein preventing Tat from oxidation and maintaining its biological activity, therefore increasing the shelf-life of the Tat protein vaccine. The microspheres efficiently delivered Tat intracellularly, and were not toxic in vitro nor in mice, even after multiple administrations. These results indicate that these novel microparticles are safe and represent a promising delivery system for vaccination with Tat, as well as for other subunit vaccines, particularly when a native protein conformation is required.

AIDS Vaccines↗

PubMed2003

Immunization with low doses of HIV-1 tat DNA delivered by novel cationic block copolymers induces CTL responses against Tat.

Cytotoxic T cell responses are key to the control of intracellular pathogens including HIV-1. In particular, HIV-1 vaccines based on regulatory proteins, such as Tat, are aimed at controlling HIV-1 replication and at blocking disease development by inducing cytotoxic T cell responses. Naked DNA is capable of inducing such responses but it requires several inoculations of high amounts of DNA, and/or prime-boost regimens. Here, we show that a novel class of cationic block copolymers protect the DNA from DNAse I digestion, and improve DNA delivery to antigen-presenting cells (APCs) after intramuscular (i.m.) vaccination. In particular, three cationic block copolymers (K1, K2 and K5) were used to deliver the HIV-1 pCV-tat DNA vaccine in BALB/c mice. The results indicate that vaccination with a very low dose (1 microg) of pCV-tat delivered by the cationic block copolymer K2 is safe and, as compared to naked DNA (up to 30 microg), greatly increases the CTL response against Tat, which was detected in all animals in the absence or in the presence of re-stimulation.

AIDS Vaccines↗

PubMed2003

Core-shell nanospheres for oligonucleotide delivery. V: adsorption/release behavior of 'stealth' nanospheres.

The adsorption/release behavior of oligodeoxynucleotides (ODNs) on new PEGylated core-shell polymethylmethacrylate nanospheres is described. The outer shell consists of alkyl chains containing quaternary ammonium groups and of poly(ethylene glycol) chains, both covalently bound to the inner core. Ion pair formation between negatively charged ODN phosphate groups and positively charged groups on the nanosphere surface is the main interaction mechanism. No cellular toxicity in HL60 cells is observed at nanosphere concentrations required for biologically active ODN delivery. These results indicate that these novel cationic polymeric nanoparticles are safe and represent promising vectors for oligonucleotide delivery.

Adsorption↗

PubMed2002

A new facile synthesis of tertiary dithioesters.

Thermal decomposition of tertiary azo compounds in the presence of a triphenylmethyl dithioester results in the formation of the corresponding tertiary dithioesters. This procedure is especially useful for the synthesis of tertiary phosphoryldithioformates, but also represents an easy synthetic methodology of general applicability.

Journal Article↗

PubMed2002

Micellar-type complexes of tailor-made synthetic block copolymers containing the HIV-1 tat DNA for vaccine application.

A novel class of cationic block copolymers constituted by a neutral hydrophilic poly(ethylene glycol) (PEG) block and a positively charged poly(dimethylamino)ethyl methacrylate block was prepared for delivery of DNA. These block copolymers spontaneously assemble with DNA to give in aqueous medium micellar-like structures. Five of these novel block copolymers (K1-5), differing in the length of both the PEG chain and the linear charge density of the poly(dimethylamino)ethyl methacrylate block, were prepared and analyzed for gene delivery, gene expression and safety. All five block copolymers protected DNA from DNAse I digestion and delivered the DNA into the cell. However, only three of them (K1, K2 and K5) released the DNA at level allowing efficient gene expression into cells. No toxic effects of both the copolymers alone or their DNA complexes were observed in vitro or in mice. In addition, copolymers were scarcely immunogenic. These results indicate that this novel class of cationic block copolymers is safe and possesses the biological characteristics required for DNA delivery, thus, representing promising vehicles for DNA vaccination.

AIDS Vaccines↗

PubMedDate not supplied

Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations.

New high-molecular-weight hydrophobic/hydrophilic segmented copolymers of poly(ester ether carbonate) structure, containing poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) segments in their main chain, were synthesized and characterized. These copolymers were obtained by a two-step chain-extension reaction carried out in the presence of alpha,omega-dihydroxy-oligoPCL of molecular weight 1250 and PEG samples of molecular weight 150, 400, 600, 1000, and 2000. The molecular structures of all synthesized materials were characterized by means of (1)H NMR and (13)C NMR spectroscopy, their molecular weights were determined by means of size exclusion chromatography, and their thermal properties were obtained by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The poly(ester ether carbonate)s of this study are partly or totally miscible at least up to 50 wt % with poly(vinyl chloride) (PVC) and could be used to produce flexible PVC formulations. The miscibility between PVC and the poly(ester ether carbonate)s reported in this paper was investigated by means of DSC and DMA analysis. PVC blends were also analyzed by determining their swellability and the amount of extractables in aqueous media. By comparison purposes, the chain-extension product of PCL1250, that is, PCL polycarbonate, was also synthesized and characterized. The results obtained demonstrated that the copolymers with shortest PEG segment length, i.e. PEG150, 400, and 600, give the best results in terms of miscibility with PVC and lead to blends with maximum resistance to extraction by water. Therefore, they represent, in principle, good substitutes for low-molecular-weight, leachable PVC plasticizers, such as di(ethylhexyl) phthalate.

Biopolymers↗

PubMedDate not supplied

Biodegradable polymers from renewable sources: rheological characterization of hemicellulose-based hydrogels.

Hemicellulose-based hydrogels were prepared by radical polymerization of 2-hydroxyethyl methacrylate or poly(ethylene glycol) dimethacrylate with oligomeric hydrosoluble hemicellulose modified with well-defined amounts of methacrylic functions. The polymerization reaction was carried out in water at 40 degrees C using a redox initiator system. The hydrogels were in general elastic, soft, and easily swellable in water. Their viscoelastic properties were determined by oscillatory shear measurements on 2 mm thick hydrogels under a slight compression to avoid slip, over the frequency range 10(-1) to 10(2). The rheological characterization indicated that the elastic response of the hydrogels was stronger than the viscous response, leading to the conclusion that the hydrogel systems displayed a predominantly solid-like behavior. The curves showed an increase in shear storage modulus with increasing cross-linking density. The nature of the synthetic comonomer in the hemicellulose-based hydrogels also influenced the shear storage modulus. Comparison of hemicellulose-based hydrogels with pure poly(2-hydroxyethyl methacrylate) hydrogels showed that their behaviors were rather similar, demonstrating that the synthetic procedure made it possible to prepare hemicellulose-based hydrogels with properties similar to those of pure poly(2-hydroxyethyl methacrylate) hydrogels.

Biodegradation, Environmental↗