PubMed Health⌕ Search

Biomedical subjects

Milko E van der Boom

Publications and source records attributed to Milko E van der Boom.

18 recordsLinked to original sources
PubMed2006

Photoluminescence of a covalent assembled porphyrin-based monolayer: optical behavior in the presence of O2.

The optical O(2) recognition capability of a covalently assembled monolayer (CAM) of 5,10,15-tri-{p-dodecanoxyphenyl}-20-(p-hydroxyphenyl) porphyrin on silica-based substrates was studied at room temperature by both UV-vis and photoluminescence (PL) measurements. The optical properties of this robust monolayer setup appear to be highly sensitive to the O(2) concentration in N(2). Both UV-vis and PL measurements were used to study the porphyrin-oxygen interactions. The monolayer-based sensor exhibits a short response time and can be restored within seconds. The oxygen-induced luminescence quenching of the monolayer involves both ground and excited states. The proposed mechanism responsible for the luminescence quenching involves different kinds of interactions between the monolayer and O(2).

Journal Article↗
PubMed2006

Optical sensing of parts per million levels of water in organic solvents using redox-active osmium chromophore-based monolayers.

Optical sensing of parts per million (ppm)-levels of H2O (10-300 ppm) in an organic solvent with robust, osmium chromophore-based monolayers is demonstrated. The H2O-induced reduction of the covalently bound osmium(III) complex is fully reversible and can be readily monitored by UV/vis absorption spectroscopy. The thermally robust sensor can be reactivated chemically within 3 min.

Furans↗
PubMed2006

Controlling structure from the bottom-up: structural and optical properties of layer-by-layer assembled palladium coordination-based multilayers.

Layer-by-layer assembly of two palladium coordination-based multilayers on silicon and glass substrates is presented. The new assemblies consist of rigid-rod chromophores connected by terminal pyridine moieties to palladium centers. Both colloidal palladium and PdCl2(PhCN)2 were used in order to determine the effect of the metal complex precursor on multilayer structure and optical properties. The multilayers were formed by an iterative wet-chemical deposition process at room temperature in air on a siloxane-based template layer. Twelve consecutive deposition steps have been demonstrated resulting in structurally regular assemblies with an equal amount of chromophore and palladium added in each molecular bilayer. The optical intensity characteristics of the metal-organic films are clearly a function of the palladium precursor employed. The colloid-based system has a UV-vis absorption maximum an order of magnitude stronger than that of the PdCl2-based multilayer. The absorption maximum of the PdCl2-based film exhibits a significant red shift of 23 nm with the addition of 12 layers. Remarkably, the structure and physiochemical properties of the submicron scale PdCl2-based structures are determined by the configuration of the approximately 15 angstroms thick template layer. The refractive index of the PdCl2-based film was determined by spectroscopic ellipsometry. Well-defined three-dimensional structures, with a dimension of 5 microm, were obtained using photopatterned template monolayers. The properties and microstructure of the films were studied by UV-vis spectroscopy, spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray reflectivity (XRR), scanning electron microscopy (SEM), and aqueous contact angle measurements (CA).

Journal Article↗
PubMed2006

Strategies for electrooptic film fabrication. Influence of pyrrole-pyridine-based dibranched chromophore architecture on covalent self-assembly, thin-film microstructure, and nonlinear optical response.

The new dibranched, heterocyclic "push-pull" chromophores bis{1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (1), 1-(pyrid-4-yl)-2-(N-methyl-5-formylpyrrol-2-yl)ethylene (2), {1-(N-methylpyridinium-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}{(1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (3), N-methyl-2-[1-(N-methylpyrid-4-yl)ethen-2-yl]-5-[pyrid-4-yl]ethen-2-yl]pyrrole iodide (4), bis{1-(N-methyl-4-pyridinio)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane iodide (5), and N-methyl-2,5-[1-(N-methylpyrid-4-yl)ethen-2-yl]pyrrole iodide (6) have been synthesized and characterized. The neutral (1 and 2) and monomethyl salts (3 and 4) undergo chemisorptive reaction with iodobenzyl-functionalized surfaces to afford chromophore monolayers SA-1/SA-2 and SA-3/SA-4, respectively. Molecular structures and other physicochemical properties have been defined by (1)H NMR, optical spectroscopy, and XRD. Thin-film characterization by a variety of techniques (optical spectroscopy, specular X-ray reflectivity, atomic force microscopy, X-ray photoelectron spectroscopy, and angle-dependent polarized second harmonic generation) underscore the importance of the chromophore molecular architecture as well as film growth method on film microstructure and optical/electrooptic response.

Journal Article↗
PubMed2006

Site affinity effects upon charge injection into siloxane-based monolayers.

Submolecular electrical information is successfully derived by applying element-specific, chemically resolved electrical measurements to a covalently bound stilbazole-based monolayer on a silicon substrate. Pronounced affinity effects are found in the response of adjacent atomic sites to external charge injection, accompanied by intramolecular polarization variations. These noncontact electrical read-out capabilities may provide a first entry toward the realization of organic devices based on submolecular electrical units.

Journal Article↗
PubMed2006

Submolecular potential profiling across organic monolayers.

Potential profiles across molecular layers are constructed by means of noncontact electrically stimulated photoelectron spectroscopy, probing for the first time the molecule-substrate interface potential and resolving local screening effects across inner phenyl groups.

Journal Article↗
PubMed2005

Platinum stilbazoles: ring-walking coupled with aryl-halide bond activation.

The reaction between tetrakis(triethylphosphine)platinum(0) and 4-[trans-2-(4-bromophenyl)vinyl]pyridine (1) is examined. Initially, the metal center coordinates to the bridging double bond of 1. Complexes 2 and 3 were fully characterized, and their X-ray crystallography structures are presented. Upon heating, either in solution or in the solid state, complex 2 undergoes C-Br oxidative addition to give complex 3. Kinetic studies revealed that this conversion is unimolecular and does not involve dissociation of the metal center from the double bond. Density functional studies show that a plausible mechanism involves the metal center "walking" around the pi-system from the bridging C=C double bond to the C-Br bond.

Journal Article↗
PubMed2005

NLO properties of metallabenzene-based chromophores: a time-dependent density functional study.

The static and dynamic first hyperpolarizabilities for a series of substituted metallabenzene-based nonlinear optical (NLO) chromophores were determined by time-dependent density functional theory (TDDFT). The electronic excitation contributions to the first hyperpolarizability are rationalized in terms of the two-level model. The effects on the hyperpolarizabilities of (a) the metal center (Os, Ir, Pt); (b) the ligand environment (PH3, CO, Cl); (c) various donor and acceptor substituents (NH2, OH, Me, H, Cl, Br, I, COOMe, COOH, CN, NO2); and (d) the length of pi-conjugation were studied. Our calculations predict that metallabenzenes have significant second-order NLO susceptibilities, ranging from = 1.0 x 10(-29) to 5.6 x 10(-28) esu and from mu = 3.0 x 10(-47) to 1.1 x 10(-44) esu, that can be tuned by changing the metal center and/or ligand environment.

Journal Article↗
PubMed2005

Uniform approach to bacteriochlorophyll-based monolayers on conducting, semiconducting, and insulating substrates.

A general approach is demonstrated for the formation of monolayers comprised of free-base and metalated Bacteriochlorophyll-based derivatives providing a new vehicle for studying photosynthetic motifs and chromophore thin-film interactions. Accessibility to covalent and self-assembled systems on conducting, semiconducting, and insulating substrates is realized utilizing identical molecular building blocks. The monolayers retain the optical features typical for the new systems in solution. Molecular organization of chromophore interaction motifs can be sequentially designed using preassembled building blocks in solution and expressed in the thin film optical properties. For instance, intramolecular pi-pi stacking is conserved for the dimeric Ni-based chromophores as deduced from the spectroscopic measurements of the monolayers and in solution.

Bacteriochlorophylls↗
PubMed2004

A computational foray into the formation and reactivity of metallabenzenes.

Various metallabenzene complexes, analogues of benzene where one CH unit has been replaced by an organometallic fragment, have been reported in the literature. A detailed theoretical investigation on the chemistry of these complexes is presented here. This includes an evaluation of their aromaticity, the mechanisms of formation of osmium, iridium, and platinum metallabenzene complexes, and one intriguing aspect of their chemistry, the formation of cyclopentadienyl (Cp) complexes. X-ray photoelectron spectroscopy (XPS) measurements on two osmabenzene examples are also presented. In addition, diffuse functions for use with the SDD and SDB-cc-pVDZ basis set-RECP combinations are presented for the transition metals.

Journal Article↗
PubMed2004

Enhancement of molecular properties in thin films by controlled orientation of molecular building blocks.

We demonstrate the design and formation of thin films having divergent physicochemical properties by using two porphyrin building blocks with high chemical and optical resemblance. A predetermined variation in the molecular design is efficiently transferred and enhanced when constituting a two-dimensional film via control of molecular orientation. Variations of the peripheral substituents on the porphyrin ring resulted in control of the molecular orientation at the surface.

Chemical Phenomena↗
PubMed2003

Metallabenzene versus Cp complex formation: a DFT investigation.

One common reaction that metallabenzene complexes undergo is the formation of cyclopentadienyl (Cp) complexes. Density functional theory (DFT) was used here to investigate the reaction mechanism. It was found that the reaction can proceed via a carbene migratory insertion class of C-C coupling. Cp complexes are found to be thermodynamically favored, except for the case of (C5H5Ir)(PH3)2Cl2 (1j) where the metallabenzene was favored. Isolation a rhodiabenzene of the type (C5H5Rh)(PH3)2Cl2 (1m) and a palladiabenzene, such as (C5H5Pd)Cp (1p), may be possible.

Journal Article↗
PubMed2003

Cycloaddition reactions of metalloaromatic complexes of iridium and rhodium: a mechanistic DFT investigation.

The mechanistic details of 1,2- and 1,4-cycloaddition reactions of acetone, CO(2), and CS(2) to isostructural iridiabenzene, iridiapyrylium, and iridiathiabenzene complexes, as well as their rhodium analogues, were elucidated by density functional theory (DFT) at the PCM/mPW1K/SDB-cc-pVDZ//mPW1K/SDD level of theory. The calculated reaction profiles concur with reported experimental observations. It was found that the first complex reacts via a concerted reaction mechanism, while the latter two react by a stepwise mechanism. Several factors affecting the reaction mechanisms and outcome were identified. They include the composition and size of the metal-aromatic ring, the length of the substrate C=X (X = O, S) bond, the geometry of the product, the symmetry of the frontier molecular orbitals, and the type of reaction mechanism involved.

Journal Article↗