PubMed Health⌕ Search

Biomedical subjects

Minghui Yang

Publications and source records attributed to Minghui Yang.

14 recordsLinked to original sources

The R2R3-MYB transcription factor ScMYB20 negatively regulates drought and salt tolerance through a dual-repression of ScCHALCONE SYNTHASE-1 (ScCHS1)-mediated flavonoid biosynthesis in the desert moss Syntrichia caninervis.

The desert moss Syntrichia caninervis is one of the most desiccation-tolerant land plants known and provides a powerful system for dissecting the molecular foundations of extreme stress adaptation in early-diverging land lineages. The MYB transcription factor superfamily orchestrates secondary metabolism and stress signaling across plants, yet its lineage-specific evolution and mechanistic deployment in bryophytes remain poorly understood. Here, we identified 65 ScMYB genes in the S. caninervis genome and showed that the family expanded predominantly through dispersed duplication, with no detectable synteny to vascular-plant MYBs, indicating bryophyte-specific neo-functionalization. Integrating phylogenetic clustering, cis-element architecture and stress-responsive expression profiling, we pinpointed ScMYB20, a nuclear-localized, S13-subgroup R2R3-MYB that is rapidly and strongly induced by dehydration and salinity. Heterologous overexpression in Arabidopsis, together with overexpression and RNAi in S. caninervis, demonstrated that ScMYB20 negatively regulates drought and salt tolerance by suppressing antioxidant capacity, osmotic adjustment and photosynthetic performance, while concomitantly elevating ROS and MDA accumulation. Mechanistically, ScMYB20 directly binds a TAACCA motif in the ScCHS1 promoter to repress its transcription, and simultaneously sequesters the WD40 protein ScTTG1, a positive transcriptional activator of ScCHS1, thereby antagonising ScTTG1-mediated activation. Transient ScCHS1 overexpression restored flavonoid accumulation, antioxidant capacity and stress tolerance. Together, our findings define a dual-repression module (ScMYB20-ScTTG1-ScCHS1) that fine-tunes flavonoid flux under abiotic stress, and provide evolutionary and mechanistic insights into how R2R3-MYB repressors evolved to balance metabolic investment and stress survival in land plants.

Syntrichia caninervis↗

Spectroscopy and potential energy surface of the H2-CO2 van der Waals complex: experimental and theoretical studies.

A 4-D ab initio potential energy surface is calculated for the intermolecular interaction of hydrogen and carbon dioxide, using the CCSD(T) method with a large basis set. The surface has a global minimum with a well depth of 212 cm(-1) and an intermolecular distance of 2.98 A for a planar configuration with both the O-C-O and H-H axes perpendicular to the intermolecular axis. Bound state calculations are performed for the H(2)-CO(2) van der Waals complex with H(2) in both the para and ortho spin states, and the binding energy of paraH(2)-CO(2)(50.4 cm(-1)) is found to be significantly less than that of orthoH(2)-CO(2)(71.7 cm(-1)). The surface supports 7 bound intermolecular vibrational states for paraH(2)-CO(2) and 19 for orthoH(2)-CO(2), and the lower rotational levels with J< or = 4 follow an asymmetric rotor pattern. The calculated infrared spectrum of paraH(2)-CO(2) agrees well with experiment. For orthoH(2)-CO(2), the ground state rotational levels allowed by symmetry are found to have (K(a), K(c))=(even, odd) or (odd, even). This somewhat unexpected fact enables the previously observed experimental spectrum to be assigned for the first time, in good agreement with theory, and indicates that the orientation of hydrogen is perpendicular to the intermolecular axis in the ground state of the orthoH(2)-CO(2) complex.

Journal Article↗

Electrochemical biosensing utilizing synergic action of carbon nanotubes and platinum nanowires prepared by template synthesis.

Platinum nanowires (PtNWs) prepared by electrodeposition method with the help of porous anodic aluminum oxide (AAO) templates have been solubilized in chitosan (CHIT) together with carbon nantubes (CNTs) to form a PtNW-CNT-CHIT organic-inorganic system. The resulting PtNW-CNT-CHIT material brings capabilities for utilizing synergic action of PtNWs and CNTs to facilitate electron-transfer process in electrochemical sensor design. The PtNW-CNT-CHIT film modified electrode offered a significant decrease in the overvoltage for the hydrogen peroxide and showed to be excellent amperometric sensors for hydrogen peroxide at -0.1 V over a wide range of concentrations, and the sensitivity is 260 microAmM-1cm-2. As an application example, by linking glucose oxidase (GOx), an amplified biosensor toward glucose was prepared. The glucose biosensor exhibits a selective determination of glucose at -0.1 V with a linear response range of 5 x 10(-6) to 1.5 x 10(-2)M with a correlation coefficient of 0.997, and response time <10s. The high sensitivity of the glucose biosensor is up to 30 microAmM-1cm-2 and the detection limit was 3 microM. The biosensor displays rapid response and expanded linear response range, and excellent repeatability and stability.

Biosensing Techniques↗

Platinum nanowire nanoelectrode array for the fabrication of biosensors.

Platinum nanowire arrays can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm and the height about 2 microm. The nanowire array prepared by the proposed method can be considered as nanoelectrode array (NEA) with nanoelectrode density of 5 x 10(8)cm(-2). While the NEA can improve the signal-to-noise ratio and decrease the detection limit, the high surface area of the platinum NEA circumvents the problem of conventional platinum electrodes associated with the limited electroactive site. The platinum NEA can direct response to hydrogen peroxide at low potential of 0 V with wide linear range (1 x 10(-7)-6 x 10(-2)M) and sensitivity 50 times larger than that of the conventional platinum electrode. With the absorption of glucose oxidase onto the ordered NEA surface, the spatially patterned glucose oxidase improves greatly the resulting biosensor. The biosensor can achieve interference free determination of glucose with wide linear range (10(-6)-3 x 10(-2)M). The sensitivity of the glucose biosensor is one-fifth of the sensitivity toward hydrogen peroxide, indicating high efficiency of signal transduction. The biosensor was used to determine glucose in real blood samples, and the glucose contents determined by the present biosensor were in agreement with the results of existing method.

Biosensing Techniques↗

Amperometric determination of bovine insulin based on synergic action of carbon nanotubes and cobalt hexacyanoferrate nanoparticles stabilized by EDTA.

A simple approach is proposed for the synthesis of cobalt hexacyanoferrate nanoparticles (CoNPs) with uniform shape and size controlled by ethylene diamine tetraacetic acid (EDTA) as a stabilizer. A sensitive amperometric biosensor for insulin has been prepared using glassy carbon electrodes by solubilization of carbon nanotubes (CNTs) in chitosan (CHIT) together with CoNPs synthesized by the new methodology. The CoNP-CNT-CHIT organic-inorganic system exerts a synergistic effect, resulting in the remarkably enhanced insulin currents owing to the superior electron-transfer ability of CNTs and the excellent reversible redox centers of CoNPs. High-resolution transmission electron microscopy (HRTEM) was used to provide closer inspection of the CoNPs. The effects of alkali metal cations and the concentrations of CNTs and CoNPs on the voltammetric behavior of the film-modified electrode were also investigated. In pH 6.98 phosphate buffer (PB) at +0.7 V (vs. SCE) the insulin biosensor exhibits a linear response range of 0.1-3 microM with a correlation coefficient of 0.98, and the detection limit (S/N=3) is determined to be 40 nM, the stability of the biosensor was tested and found satisfactory. There is great promise for in vivo measurements of this important hormone.

Amino Acid Sequence↗

Platinum nanoparticles-doped sol-gel/carbon nanotubes composite electrochemical sensors and biosensors.

Platinum nanoparticle-doped sol-gel solution is prepared and used as a binder for multi-walled carbon nanotubes (CNT) for the fabrication of electrochemical sensors. Amine group containing sol-gel solution is selected to utilize the affinity of -NH(2) groups toward metal nanoparticles for stabilization the nanoparticles in solution. The resulting CNT-silicate material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of Pt nanoparticles and CNT. The combined electrocatalytic activity permits low-potential detection of hydrogen peroxide with remarkably improved sensitivity. With the incorporation of glucose oxidase within the Pt-CNT-silicate matrix, a Pt-CNT paste-based biosensor has been constructed that responds more sensitively to glucose than CNT-based biosensor. The influences of the composite of the sol-gel solution, the quantity of the solution and the Pt nanoparticles loading are examined. In pH 6.98 phosphate buffer, almost interference free determination of glucose is realized at 0.1 V versus SCE with a linear range from 1 to 25 mM, a response time <15s, and the sensitivity is 0.98 microA mM(-1)cm(-2). The sensitivity of the Pt-CNT paste-based biosensor is almost four times larger than that of the CNT-based biosensor (0.27 microA mM(-1)cm(-2) at 0.1 V). The improved electrocatalytic activity and surface renewability made the Pt-CNT-silicate system a potential platform to immobilize different enzymes for other bioelectrochemical applications.

Adsorption↗

Layer-by-layer self-assembled multilayer films of carbon nanotubes and platinum nanoparticles with polyelectrolyte for the fabrication of biosensors.

Platinum nanoparticle-doped chitosan (CHIT) solution can be easily prepared by treating the CHIT solution with aqueous H2PtCl6 solution followed by chemical reduction of Pt(IV) with NaBH4. Multiwalled carbon nanotubes (MWCNT) are then dispersed in the nanoparticle-doped solution. The resulting Pt-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of Pt nanaoparticles and CNT. Positively charged Pt-CNT-CHIT solution and negatively charged poly(sodium-p-styrenesulfonate) salt (PSS) have been employed to fabricate stable ultrathin multilayer films on gold electrode and quartz glass slides in a layer-by-layer fashion. Cyclic voltammetric and UV-vis adsorption spectroscopy confirms the consecutive growth of the multilayer films. The modified gold electrode allows low-potential detection of hydrogen peroxide with high sensitivity and fast response time. With the immobilization of cholesterol oxidase onto the electrode surface using glutaric dialdehyde, a biosensor that responds sensitively to cholesterol has been constructed. In pH 6.98 phosphate buffer, almost interference free determination of cholesterol has been realized at 0.1 V vs. SCE with a linear range from 0.01 to 3mM and response time<30s. With the immobilization of another cholesterol esterase enzyme layer, the biosensor was used to determine total cholesterol in serum samples with satisfactory results.

Biosensing Techniques↗

Carbon nanotube/cobalt hexacyanoferrate nanoparticle-biopolymer system for the fabrication of biosensors.

Cobalt hexacyanoferrate nanoparticles (CoNP) can be easily prepared by mixing hexacyanoferrate and cobalt chloride solution at room temperature. The nanoparticles were solubilized in aqueous solution of a biopolymer chitosan (CHIT). With the introduction of carbon nanotubes (CNT), the CoNP-CNT-CHIT system formed shows synergy between CNT and CoNP with the significant improvement of redox activity of CoNP due to the excellent electron-transfer ability of CNT. The CoNP-CNT-CHIT film modified glassy carbon electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. In particular, with the introduction of CNT, it amplified the H2O2 sensitivity by approximately 70 times compared to film of CoNP-CHIT. With the immobilization of glucose oxidase onto the electrode surface using glutaric dialdehyde, a biosensor that responds sensitively to glucose has been constructed. In pH 6.98 phosphate buffer, interference free determination of glucose has been realized at -0.2V versus saturated calomel electrode (SCE) with a linear range from 0.01 to 10 mM and response time<10s. The detection limit was 5 microM glucose (S/N=3).

Biocompatible Materials↗

Amperometric biosensor for choline based on layer-by-layer assembled functionalized carbon nanotube and polyaniline multilayer film.

Conducting polymer film was prepared by electrochemical polymerization of aniline. Multiwalled carbon nanotubes (MWNTs) were treated with a mixture of concentrated sulfuric and nitric acid to introduce carboxylic acid groups to the nanotubes. By using the layer-by-layer method, homogeneous and stable MWNTs and polyaniline (PANI) multilayer films were alternately assembled on glassy carbon (GC) electrodes. Conducting polymer of PANI had three main functions: (i) excellent antiinterference ability, (ii) protection ability in favor of increasing the amount of the MWNTs immobilized on GC electrodes, and (iii) superior transducing ability. The protection effect of PANI film and the electrostatic interaction between positively charged PANI and negatively charged MWNTs both attributed to immobilizing abundant MWNTs stably, thereby enhancing the catalytic activity. The layer-by-layer assembled MWNTs and PANI-modified GC electrodes offered a significant decrease in the overvoltage for the H2O2 and were shown to be excellent amperometric sensors for H2O2 from +0.2V over a wide range of concentrations. As an application example, by linking choline oxidase (CHOD), an amplified biosensor toward choline was prepared. The choline biosensor exhibited a linear response range of 1x10(-6) to 2x10(-3) M with a correlation coefficient of 0.997, and the response time and detection limit (S/N=3) were determined to be 3 s and 0.3 microM, respectively. The antiinterference biosensor displays a rapid response and an expanded linear response range as well as excellent reproducibility and stability.

Alcohol Oxidoreductases↗

Continuous configuration time-dependent self-consistent field method for polyatomic quantum dynamical problems.

A new continuous configuration time-dependent self-consistent field method has been developed to study polyatomic dynamical problems by using the discrete variable representation for the reaction system, and applied to a reaction system coupled to a bath. The method is very efficient because the equations involved are as simple as those in the traditional single configuration approach, and can account for the correlations between the reaction system and bath modes rather well.

Journal Article↗

Bienzymatic amperometric biosensor for choline based on mediator thionine in situ electropolymerized within a carbon paste electrode.

An amperometric enzyme biosensor for the determination of choline utilizing two enzymes, choline oxidase (CHOD) and horseradish peroxidase (HRP), is described. The biosensor consisted of CHOD cross-linked onto a HRP-immobilized carbon paste electrode. The biosensor was prepared by in situ electropolymerization of poly(thionine) within a carbon paste containing the enzyme HRP and thionine monomer and then CHOD was immobilized by using chitosan film through cross-linking with glutaraldehyde. The in situ electrogenerated poly(thionine) displays excellent electron transform efficiency between the enzyme HRP and the electrode surface, and the polymer enables improvement in enzyme immobilization within the paste. Several parameters such as the amount of thionine and enzyme, the applied potential, the pH, etc. have been studied. Amperometric detection of choline was realized at an applied potential of -0.2V vs saturated calomel electrode in 1/15M phosphate buffer solution (pH 7.4) with a linear response range between 5.0 x 10(-6) and 6.0 x 10(-4)M choline and a response time of 15s. When applied to the analysis of phosphatidylcholine in serum samples, a 0.997 correlation was obtained between the biosensor results and those obtained by a hospital method.

Alcohol Oxidoreductases↗

State-to-State integral cross section for the H+H2O-->H2+OH abstraction reaction.

The initial state selected time-dependent wave-packet method was extended to calculate the state-to-state integral cross section for the title reaction with H2O in the ground rovibrational state on the potential energy surface of Yang, Zhang, Collins, and Lee. One OH bond length was fixed in the study, which is justifiable for the abstraction reaction, but the remaining 5 degrees of freedom were treated exactly. It was found that the H2 molecule is produced vibrationally cold for collision energy up to 1.6 eV. The OH rotation takes away about 4% of total available energy in the products, while the fraction of energy going to H2 rotation increases with collision energy to about 20% at 1.6 eV.

Journal Article↗

Probing the transition state via photoelectron and photodetachment spectroscopy of H(3)O(-).

The H(3)O(-) anion has stable and metastable structures that resemble configurations in the vicinity of the transition state for the neutral reactions OH + H(2) <--> H(2)O + H. Photoelectron spectroscopy of this anion probes the neutral reaction dynamics in the critical transition-state region. Accurate quantum dynamics calculations of the photoelectron intensity and photodissociation product energies are shown to provide a quantitatively reliable means of interpreting such experimental observations and reveal a detailed picture of the reaction dynamics.

Journal Article↗

Breakdown of the spectator model for the OH bonds in studying the H+H2O reaction.

The time-dependent wave packet method is used to study the exchange and abstraction processes for the H+H2O reaction with both OH bonds in the H2O reactant treated as reactive bonds in full dimension. The calculation clearly shows that it is necessary to treat both OH bonds in this way in order to accurately investigate the exchange process. However, for the abstraction process, the spectator model works very well. Nonreactive treatment of one OH bond by using a few vibrational basis functions or even freezing the bond can yield very accurate abstraction reaction probability.

Journal Article↗