Biomedical subjects

Mingming Liu

Publications and source records attributed to Mingming Liu.

6 recordsLinked to original sources

PubMed2026

Efficacy, tolerability, and threshold effect of atropine eye drops for myopia control: A systematic review and dose-response meta-analysis.

Atropine is an emerging therapy for myopia, yet the optimal concentration for prescription remains uncertain. We searched PubMed, Embase, Web of Science, Cochrane Library, World Health Organization International Clinical Trials, and ClinicalTrials.gov registry platforms. We included the randomized clinical trials (RCTs) that compared any dose of atropine against a placebo in myopic children. Among 3566 studies assessed, we identified 33 eligible RCTs involving 6301 children aged 4-18 years, with 10 different concentrations and a mean follow-up time of 19.5 ± 12.3 months. A nonlinear relationship was observed between atropine dosage and treatment efficacy (P < 0.001). Compared to placebo groups, the mean differences in reducing annual spherical equivalent refraction progression for atropine concentrations of 0.01%, 0.02%, 0.03%, 0.04%, and 0.05% were 0.21 diopters (D) (95% CI, 0.13-0.28), 0.35 D (95% CI, 0.23-0.46), 0.42 D (95% CI, 0.28-0.56), 0.45 D (95% CI, 0.30-0.60), and 0.46 D (95% CI, 0.32-0.61) respectively For higher concentrations, the estimates were 0.49 D (95% CI, 0.34-0.63) for 0.1% and 0.99 D (95% CI, 0.66-1.31) for 1%, although these were based on fewer and smaller trials. Higher doses of atropine were associated with decreased amplitude of accommodation (P = 0.02), increased pupil diameters (P = 0.01) and a higher frequency of photophobia (P = 0.02). Our findings suggest that the increase in treatment efficacy with higher concentrations may plateau beyond a certain range, and that the current practice of increasing atropine concentrations for children who show inadequate responses to lower doses should be confined to a specific concentration range. This analysis is limited by the number, design heterogeneity, and sample sizes of available trials for higher concentrations, and by the frequent lack of pre-intervention refractive history in included studies. Therefore, estimates-particularly for doses exceeding 0.1%-should be interpreted with caution.

Humans↗

PubMed2006

Preparation and characteristics of high pH-resistant sol-gel alumina-based hybrid organic-inorganic coating for solid-phase microextraction of polar compounds.

A novel alumina-based hybrid organic-inorganic sol-gel coating was first developed for solid-phase microextraction (SPME) from a highly reactive alkoxide precursor, aluminum sec-butoxide, and a sol-gel-active organic polymer hydroxyl-terminated polydimethylsiloxane (OH-TSO). The underlying mechanism was discussed and confirmed by IR spectra. The porous surface structure of the sol-gel coating was revealed by scanning electron microscopy. A detailed investigation was conducted to evaluate the remarked performance of the newly developed sol-gel alumina-OH-TSO hybrid materials. In stark contrast to the sol-gel silica-based coating, the alumina-based coating demonstrated excellent pH stability. In addition, good thermal resistance and coating preparation reproducibility are also its outstanding performance. As compared to silica-based hybrids material, the ligand exchange ability of alumina makes it structurally superior extraction sorbents for polar compounds, such as fatty acids, phenols, alcohols, aldehydes and amines. Practical applicability of the prepared alumina-OH-TSO fiber was demonstrated through the analysis of volatile alcohols and fatty acids in beer. The recoveries obtained ranged from 85.7 to 104% and the relative standard deviation values for all analytes were below 9%.

Aluminum Oxide↗

PubMed2006

Identification of alkaline proteins that are differentially expressed in an overgrowth-mediated growth arrest and cell death of Escherichia coli by proteomic methodologies.

The available Escherichia coli genome sequences offer an opportunity to further expand our understanding of this bacterium. In the current study, we present a rapid method for the isolation of bacterial alkaline proteins using acid incubation, purification and protein array by 2-DE, followed by protein identification using MS. Fifty-seven proteins were randomly chosen, in which 55 were identified by a database searching of MS data. The searching results showed that most of these alkaline proteins were involved in special functions within the cell, suggesting that alkaline proteome is an ideal fraction for an understanding of their special functions. Furthermore, alkaline proteomes were compared between the period of majority live bacteria (18-h culture), the period of similar amount of live and dead bacteria (30-h culture) and the period of majority dead bacteria (48-h culture). Six proteins were identified as differentially expressed targets, in which putative transcriptional regulator and superoxide dismutase genes were cloned and expressed for antiserum preparations. The antisera were applied for the confirmation of results obtained from 2-DE. The presented data clearly reveal that alkaline proteome analysis by 2-DE with MS plays an important role in the understanding of protein functions within the cell, and six alkaline proteins are determined as key ones in an overgrowth-mediated growth cycle of E. coli.

Cell Death↗

PubMed2005

Preparation and application of the sol-gel-derived acrylate/silicone co-polymer coatings for headspace solid-phase microextraction of 2-chloroethyl ethyl sulfide in soil.

Three types of novel acrylate/silicone co-polymer coatings, including co-poly(methyl acrylate/hydroxy-terminated silicone oil) (MA/OH-TSO), co-poly(methyl methacrylate/OH-TSO) (MMA/OH-TSO) and co-poly(butyl methacrylate/OH-TSO) (BMA/OH-TSO), were prepared for the first time by sol-gel method and cross-linking technology and subsequently applied to headspace solid-phase microextraction (HS-SPME) of 2-chloroethyl ethyl sulfide (CEES), a surrogate of mustard, in soil. The underlying mechanisms of the coating process were discussed and confirmed by IR spectra. The selectivity of the three types of sol-gel-derived acrylate/silicone coated fibers was studied, and the BMA/OH-TSO coated fibers exhibited the highest extraction ability to CEES. The concentration of BMA and OH-TSO in sol solution was optimized, and the BMA/OH-TSO (3:1)-coated fibers possessed the highest extraction efficiency. Compared with commercially available polyacrylate (PA) fiber, the sol-gel-derived BMA/OH-TSO (3:1) fibers showed much higher extraction efficiency to CEES. Therefore, the BMA/OH-TSO (3:1)-coated fibers were chosen for the analysis of CEES in soil matrix. The reproducibility of coating preparation was satisfactory, with the RSD 2.39% within batch and 3.52% between batches, respectively. The coatings proved to be quite stable at high temperature (to 350 degrees C) and in different solvents (organic or inorganic), thus their lifetimes (to 150 times) are longer than conventional fibers. Extraction parameters, such as the volume of water added to the soil, extraction temperature and time, and the ionic strength were optimized. The linearity was from 0.1 to 10 microg/g, the limit of detection (LOD) was 2.7 ng/g, and the RSD was 2.19%. The recovery of CEES was 88.06% in agriculture soil, 92.61% in red clay, and 101.95% in sandy soil, respectively.

Acrylates↗

PubMed2005

Preparation of novel solid-phase microextraction fibers by sol-gel technology for headspace solid-phase microextraction-gas chromatographic analysis of aroma compounds in beer.

3-(Trimethoxysilyl)propyl methacrylate (TMSPMA) was first used as precursor as well as selective stationary phase to prepare the sol-gel-derived TMSPMA-hydroxyl-terminated silicone oil (TMSPMA-OH-TSO) solid-phase mircroextraction (SPME) fibers for the analysis of aroma compounds in beer. TMSPMA-OH-TSO was a medium polarity coating, and was found to be very effective in carrying out simultaneous extraction of both polar alcohols and fatty acids and nonpolar esters in beer. The extraction temperature, extraction time, and ionic strength of the sample matrix were modified to allow for maximium sorption of the analytes onto the fiber. Desorption temperature and time were optimized to avoid the carryover effects. To check the matrix effects, several different matrices, including distilled water, 4% ethanol/water (v/v) solution, a concentrated synthetic beer, a "volatile-free" beer and a real beer were investigated. Matrix effects were compensated for by using 4-methyl-2-pentanol as internal standard and selecting the "volatile-free" beer as working standard. The method proposed in this study showed satisfactory linearity, precision and detection limits and accuracy. The established headspace SPME-gas chromatography (GC) method was then used for determination of volatile compounds in four beer varieties. The recoveries obtained ranged from 92.8 to 105.8%. The relative standard deviations (RSD, n = 5) for all analytes were below 10%. The major aroma contributing substances of each variety were identified via aroma indexes.

Beer↗

PubMed2005

High extraction efficiency fiber coated with calix[4] open-chain crown ether for solid-phase microextraction of polar aromatic and aliphatic compounds.

The calix[4] open-chain crown ether, 5,11,17,23-tetra-tert-butyl-25,27-di(2-allyloxyethoxyl)-26,28-dihydroxycalix[4]arene was synthesized and used for preparation of solid-phase microextraction (SPME) fibers of enhanced extraction efficiency. The new SPME coating made from calix[4] open-chain crown ether and hydroxyl-terminated silicone oil was developed with the aid of vinyltriethoxylsilane as bridge using sol-gel method and cross-linking technology. The efficiency of the novel fiber in the extraction of polar aromatic and aliphatic compounds, such as phenols, alcohols, and volatile fatty acids, was also investigated. Due to the introduction of the polar open-chain crown ether in calix[4]arene molecules, the calix[4] open-chain crown ether fiber showed much better selectivity and sensitivity to these polar compounds in comparison with calix[4]arene fiber. It also had superior extraction efficiency when compared to commercial poly(dimethylsiloxane)-divinylbenzene and polyacrylate fibers. Parts per billion to parts per trillion level detection limits were achieved for most of the analytes through SPME in conjunction with GC and flame ionization detector. The linear ranges were two to four orders of magnitude, and the RSD values were below 7% for all analytes. The novel fiber was applied to determine volatile alcohols and fatty acids in wine samples. The volatile-free wine prepared in this work was used to assure similar chemical environment for analytes in both calibration solutions and in real wine samples, thus compensating for possible matrix interferences. The established internal standard method using 4-methyl-2-pentanol as internal standard showed satisfactory accuracy and precision.

Alcohols↗