Biomedical subjects

Miqin Zhang

Publications and source records attributed to Miqin Zhang.

At least 19 recordsLinked to original sources

PubMed2006

Folic acid-PEG conjugated superparamagnetic nanoparticles for targeted cellular uptake and detection by MRI.

We report the development and in vitro study of a nanoconjugate serving as a targeted magnetic resonance imaging (MRI) contrast enhancement agent for detection of cancer cells overexpressing the folate receptor. The nanoconjugate was synthesized by coating superparamagnetic iron oxide nanoparticles with covalently bound bifunctional poly(ethylene glycol) (PEG), followed by conjugation with folic acid (FA). The specificity of the nanoconjugate targeting cancerous cells was demonstrated by comparative intracellular uptake of the nanoconjugate and PEG-/dextran-coated nanoparticles by human adenocarcinoma HeLa cells. Preferential targeting to cancerous cells was studied by comparing the uptake of the nanoconjugate by HeLa cells and by non-FR expressing osteosarcoma MG-63 cells. Uptake of the nanoconjugate by HeLa cells after 4 h incubation was found to be a 12-fold higher than that of PEG- or dextran-coated nanoparticles as quantified by inductively coupled plasma spectroscopy. A significant negative contrast enhancement was observed with magnetic resonance (MR) phantom imaging for HeLa cells over MG-63 cells, when both were cultured with the nanoconjugate. Specificity of the nanoconjugate for folate receptors was also verified with a competitive inhibition assay, in which HeLa cells were incubated with both NP-PEG-FA and free FA. The bifunctional PEG used has amide linkages within the PEG chains that can form interchain hydrogen bonding, leading to improved stability of the PEG coating. Self-assembled PEG can be controlled at the molecular level and are suitable for nanoscale coatings.

Drug Delivery Systems↗

PubMed2006

Effect of silicon oxidation on long-term cell selectivity of cell-patterned Au/SiO2 platforms.

Cellular patterning on silicon platforms is the basis for development of integrated cell-based biosensing devices, for which long-term cell selectivity and biostability remain a major challenge. We report the development of a silicon-based platform in a metal-insulator format capable of producing uniform and biostable cell patterns with long-term cell selectivity. Substrates patterned with arrays of gold electrodes were surface-engineered such that the electrodes were activated with fibronectin to mediate cell attachment and the silicon oxide background was passivated with PEG to resist protein adsorption and cell adhesion. Three types of oxide surfaces, i.e., native oxide, dry thermally grown oxide, and wet thermally grown oxide, were produced to illustrate the effect of oxide state of the surface on long-term cell selectivity. Results indicated that the cell selectivity over time differed dramatically among three patterned platforms and the best cell selectivity was found on the dry oxide surface for up to 10 days. Surface analysis results suggested that this enhancement in cell selectivity may be related to the presence of additional, more active oxide states on the dry oxide surface supporting the stability of PEG films and effectively suppressing the cell adhesion. This research offers a new strategy for development of stable and uniform cell-patterned surfaces, which is versatile for immobilization of silane-based chemicals for preparation of biostable interfaces.

Animals↗

PubMed2006

Methotrexate-immobilized poly(ethylene glycol) magnetic nanoparticles for MR imaging and drug delivery.

We report the development of a biostable methotrexate-immobilized iron oxide nanoparticle drug carrier that may potentially be used for real-time monitoring of drug delivery through magnetic resonance imaging. Methotrexate (MTX) was immobilized on the nanoparticle surface via a poly(ethylene glycol) self-assembled monolayer (PEG SAM). The cytotoxicity of the nanoparticle-drug conjugate (NP-PEG-MTX) to target cells was studied with 9L glioma cells. Cellular uptake experiments showed that the uptake of NP-PEG-MTX conjugates by glioma cells was considerably higher than that of control nanoparticles. Magnetic resonance imaging in 9L cells cultured with NP-PEG-MTX of various concentrations showed significant contrast enhancement. NP-PEG-MTX demonstrated higher cytotoxicity in 9L cells to free MTX in vitro. Leucovorin, an MTX antidote, was used to rescue the cells that had been exposed to NP-PEG-MTX or free MTX, and the experiment verified the biocompatibility of NP-PEG-MTX conjugates and the MTX on NP-PEG-MTX conjugates to be the true source of the cytotoxicity to the target cells. TEM results showed that NP-PEG-MTX conjugates were internalized into the 9L cellular cytoplasm and retained its crystal structure therein for up to 144 h, as identified by electron diffraction. This prolonged particle retention may allow physicians to image tumor cells exposed to the NP-PEG-MTX conjugate over an extended therapeutic time course.

Adsorption↗

PubMed2005

Chitosan-alginate as scaffolding material for cartilage tissue engineering.

Tissue compatibility of chitosan-alginate scaffolds was studied in vitro in terms of cell morphology, proliferation, and functionality using HTB-94 cells. The scaffold has an interconnected 3D porous structure, and was fabricated by thermally induced phase separation followed by freeze drying. Cell proliferation on the chitosan-alginate scaffold was found to be faster than on a pure chitosan scaffold. After cell culture for 2 weeks in vitro, the cells on the chitosan scaffold gradually assumed a fibroblast-like morphology while the cells on the chitosan-alginate scaffold retained their spherical morphology throughout the period of study. SDS-PAGE electrophoresis and Western blot assays for proteins extracted from cells grown on scaffolds indicated that production of cartilage-specific collagen type II, a marker for chondrocytic phenotype, increased from week 2 to week 3 on the chitosan-alginate scaffold but decreased on the chitosan scaffold. This study suggested that chitosan-alginate scaffolds promote cell proliferation, enhance phenotype expression of HTB-94 chondrocytes, and may potentially serve as an improved alternative to chitosan scaffolds for cartilage tissue engineering.

Alginates↗

PubMed2005

Methotrexate-modified superparamagnetic nanoparticles and their intracellular uptake into human cancer cells.

A magnetic nanoparticle conjugate was developed that can potentially serve both as a contrast enhancement agent in magnetic resonance imaging and as a drug carrier in controlled drug delivery, targeted at cancer diagnostics and therapeutics. The conjugate is made of iron oxide nanoparticles covalently bound with methotrexate (MTX), a chemotherapeutic drug that can target many cancer cells whose surfaces are overexpressed by folate receptors. The nanoparticles were first surface-modified with (3-aminopropyl)trimethoxysilane to form a self-assembled monolayer and subsequently conjugated with MTX through amidation between the carboxylic acid end groups on MTX and the amine groups on the particle surface. Drug release experiments demonstrated that MTX was cleaved from the nanoparticles under low pH conditions mimicking the intracellular conditions in the lysosome. Cellular viability studies in human breast cancer cells (MCF-7) and human cervical cancer cells (HeLa) further demonstrated the effectiveness of such chemical cleavage of MTX inside the target cells through the action of intracellular enzymes. The intracellular trafficking model proposed was supported through nanoparticle uptake studies which demonstrated that cells expressing the human folate receptor internalized a higher level of nanoparticles than negative control cells.

Animals↗

PubMed2005

PEG-grafted chitosan as an injectable thermosensitive hydrogel for sustained protein release.

Thermosensitive polymer hydrogels that undergo a sol-to-gel transition in response to temperature changes are of great interest in therapeutic delivery and tissue engineering as injectable depot systems. A chitosan-based, injectable thermogel was prepared by grafting an appropriate amount of PEG onto the chitosan backbone and studied for drug release in vitro using bovine serum albumin (BSA) as a model protein. When more than approximately 40 wt.% of PEG was grafted to chitosan chains via covalent bonding, the aqueous solution of the resultant copolymer was an injectable liquid at low temperature and transformed to a semisolid hydrogel at body temperature. After an initial burst release in the first 5 h, a steady linear release of protein from the hydrogel was achieved for a period of approximately 70 h. Prolonged quasi-linear release of protein up to 40 days was achieved by crosslinking the hydrogel with genipin in situ, in a fashion suitable for protein encapsulation while maintaining the injectability of the hydrogel. The crosslinkage transformed the copolymer from a physical gel to an insoluble chemical gel and substantially reduced the initial burst release of protein. Both high performance liquid chromatography (HPLC) and gel electrophoresis indicated that the primary structure of BSA released from the hydrogels with or without genipin-crosslinking was generally conserved. The hydrogel can be prepared in solutions with a physiological pH, allowing the safe incorporation of bioactive molecules for a broad range of medical applications, particularly for sustained in vivo drug release and tissue engineering.

Chitosan↗

PubMed2005

Surface modification of silicon and gold-patterned silicon surfaces for improved biocompatibility and cell patterning selectivity.

Clean silicon and gold-patterned silicon platforms were modified with methoxy-polyethylene glycol (M-PEG silane) via a self-assembly technique, which significantly improved their plasma protein resistance capability and cell patterning selectivity. Fibrinogen and IgG were used as model plasma proteins to study the efficacy of PEG layers in resisting protein adsorption. Selective cell patterning on the gold regions of a gold-patterned silicon substrate and tissue compatibility were studied with macrophage and fibroblast cells. The research also revealed how the presence of gold electrodes on a silicon substrate would influence the cell patterning selectivity. Our experimental results showed that the PEG-modified silicon surfaces had a high resistivity to protein and cell attachment and that the PEG-modified gold-patterned silicon surfaces nearly completely eliminated the protein adsorption and cell attachment on silicon. This study provides a new approach to developing biocompatible surfaces for silicon-based BioMEMS devices, particularly for biosensors where a metal-insulator format must be enforced.

Adsorption↗

PubMed2005

PEG-grafted chitosan as an injectable thermoreversible hydrogel.

PEG-grafted chitosan was formulated such that its solution undergoes a thermally reversed phase transition from an injectable free-flowing solution at low temperature to a gel at body temperature. Aqueous solutions of PEG-grafted chitosan can be prepared at physiological pH values, thereby allowing safe incorporation of bioactive molecules. This injectable thermoreversible hydrogel is potentially suitable for a wide range of biomedical applications, particularly in sustained in vivo drug release and tissue engineering. An aqueous solution of PEG-grafted chitosan polymer is injectable at low temperatures but forms a gel at body temperature.

Chitosan↗

PubMed2005

Chitosan-alginate hybrid scaffolds for bone tissue engineering.

A biodegradable scaffold in tissue engineering serves as a temporary skeleton to accommodate and stimulate new tissue growth. Here we report on the development of a biodegradable porous scaffold made from naturally derived chitosan and alginate polymers with significantly improved mechanical and biological properties as compared to its chitosan counterpart. Enhanced mechanical properties were attributable to the formation of a complex structure of chitosan and alginate. Bone-forming osteoblasts readily attached to the chitosan-alginate scaffold, proliferated well, and deposited calcified matrix. The in vivo study showed that the hybrid scaffold had a high degree of tissue compatibility. Calcium deposition occurred as early as the fourth week after implantation. The chitosan-alginate scaffold can be prepared from solutions of physiological pH, which may provide a favorable environment for incorporating proteins with less risk of denaturation. Coacervation of chitosan and alginate combined with liquid-solid separation provides a scaffold with high porosity, and mechanical and biological properties suitable for rapid advancement into clinical trials.

Alginates↗

PubMed2005

Electrospun chitosan-based nanofibers and their cellular compatibility.

Chitosan-based nanofibers with an average fiber diameter controllable from a few microns down to approximately 40 nm and a narrow size distribution were fabricated by electrospinning solutions containing chitosan, polyethylene oxide (PEO), and Triton X-100. Rheological study showed a strong dependence of spinnability and fiber morphology on solution viscosity and thus on chitosan-to-PEO ratio. The nanofibers can be deposited either as a nonwoven mat or as a highly aligned bundle of controllable size. Potential use of this nanofibrous matrix for tissue engineering was studied by examining its integrity in water and cellular compatibility. It was found that the matrix with a chitosan/PEO ratio of 90/10 retained excellent integrity of the fibrous structure in water. Experimental results from cell stain assay and SEM imaging showed that the nanofibrous structure promoted the attachment of human osteoblasts and chondrocytes and maintained characteristic cell morphology and viability throughout the period of study. This nanofibrous matrix is of particular interest in tissue engineering for controlled drug release and tissue remodeling.

Biocompatible Materials↗

PubMed2005

Optical and MRI multifunctional nanoprobe for targeting gliomas.

A multifunctional nanoprobe capable of targeting glioma cells, detectable by both magnetic resonance imaging and fluorescence microscopy, was developed. The nanoprobe was synthesized by coating iron oxide nanoparticles with covalently bound bifunctional poly(ethylene glycol) (PEG) polymer, which were subsequently functionalized with chlorotoxin and the near-infrared fluorescing molecule Cy5.5. Both MR imaging and fluorescence microscopy showed significant preferential uptake of the nanoparticle conjugates by glioma cells. Such a nanoprobe could potentially be used to image resections of glioma brain tumors in real time and to correlate preoperative diagnostic images with intraoperative pathology at cellular-level resolution.

Animals↗

PubMed2004

A bifunctional poly(ethylene glycol) silane immobilized on metallic oxide-based nanoparticles for conjugation with cell targeting agents.

A trifluoroethylester-terminal poly(ethylene glycol) (PEG) silane was synthesized and self-assembled on iron oxide nanoparticles. The nanoparticle system thus prepared has the flexibility to conjugate with cell targeting agents via either carboxylic or amine terminal groups for a number of biomedical applications, including magnetic resonance imaging (MRI) and controlled drug delivery. The trifluoroethylester silane was synthesized by modifying a PEG diacid to form the corresponding bistrifluoroethylester (TFEE), followed by a reaction with 3-aminopropyltriethoxysilane (APS). The APS coupled with PEG chains confers the stability of PEG self-assembled monolayers (SAMs) and increases the PEG packing density on nanoparticles by establishing hydrogen bonding between the carbonyl and amine groups present within the monolayer structure. The success of the synthesis of the PEG TEFE silane was confirmed with (1)H NMR and Fourier transform infrared spectroscopy (FTIR). The conjugating flexibility of the PEG TEFE was demonstrated with folic acid that had carboxylic acid groups and amine terminal groups, respectively, and was confirmed by FTIR. TEM analysis showed the well-dispersed nanoparticles before and after they were coated with PEG and folic acid.

Amines↗

PubMed2004

Guided cell patterning on gold-silicon dioxide substrates by surface molecular engineering.

We report an effective approach to patterning cells on gold-silicon dioxide substrates with high precision, selectivity, stability, and reproducibility. This technique is based on photolithography and surface molecular engineering and requires no cell positioning or delivery devices, thus significantly reducing the potential damage to cells. The cell patterning was achieved by activating the gold regions of the substrate with functionalized thiols that covalently bind proteins onto the gold regions to guide subsequent cell adhesion while passivating the silicon dioxide background with polyethylene glycol to resist cell adhesion. Fourier transform infrared reflectance spectroscopy verified the successful immobilization of proteins on gold surfaces. Protein patterns were visualized by tagging proteins with Rhodamine fluorescent probes. Time-of-flight secondary ion mass spectrometry was used to characterize the chemistry of both the cell-adhesive and cell-resistant regions of surfaces after each key chemical reaction occurring during the molecular surface engineering. The ability of the engineered surfaces to guide cell adhesion was illustrated by differential interference contrast (DIC) reflectance microscopy. The cell patterning technique introduced in this study is compatible with micro- and photo-electronics, and may have many medical, environmental, and defense applications.

Animals↗

PubMed2004

Self-assembled coatings on individual monodisperse magnetite nanoparticles for efficient intracellular uptake.

Monodispersed iron oxide superparamagnetic nanoparticles were prepared using a novel circulating system. A simple dialysis method was developed to immobilize nanoparticles with functional biopolymers and targeting agents, which avoids the use of the normal centrifugation process that may cause particle agglomeration during the coating process. To enhance the specific targeting capability of the nanoparticles, a new chemical scheme was introduced, in which folic acid (FA) was chosen as the targeting agent combined with PEG serving to improve biocompatibility of nanoparticles. The AFM characterization showed that the nanoparticles produced are well dispersed with a narrow size distribution. The FTIR and XPS spectrum analyses indicated that PEG and FA-PEG have been chemically/covalently bonded to nanoparticles using synthetic approach introduced in this study. Our biological study showed that coating nanoparticles with PEG-FA significantly enhanced the intracellular uptake of nanoparticles by target cells.

Adsorption↗

PubMed2004

Cell growth and function on calcium phosphate reinforced chitosan scaffolds.

Macroporous chitosan scaffolds reinforced by calcium phosphate powders such as hydroxyapatite (HA) or calcium phosphate invert glass were fabricated using a thermally induced phase separation technique. Human osteoblast-like MG63 cells were cultured on the composite scaffolds for up to 11 days, and the cell growth and function were analyzed. The cell growth is much faster on the chitosan/HA scaffolds incorporated with the glass (CHG) than on the chitosan/HA scaffold without the glass (CH). The total protein content of cells were quantified and increased over time on both composites (CH, CHG) but was significantly higher on CHG after 7 days of culture. The cells on CHG also expressed significantly higher amount of alkaline phosphatase at days 7 and 11 and osteocalcin at day 7 than those on CH. The results suggested that the addition of glass in chitosan/hydroxyapatite composite scaffolds might enhance the proliferation and osteoblastic phenotype expression of MG63 cells. However, the chitosan-matrix scaffolds did not show higher phenotype expression of MG63 cells, in comparison with the TCPS plate, probably due to the degradation of chitosan and release of acidic byproducts. Larger amount of soluble calcium phosphate invert glasses should be added into the scaffolds to prevent chitosan from fast degradation that may affect the differentiation of osteoblast cells.

Alkaline Phosphatase↗

PubMed2003

Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods.

A new technique of combining the gel-casting and polymer sponge methods is introduced in this study to prepare macroporous hydroxyapatite scaffolds, which provides a better control over the microstructures of scaffolds and enhances their mechanical properties. With this technique, we were able to produce scaffolds with mechanical and structural properties that cannot be attained by either the polymer sponge or gel-casting method. The scaffolds prepared have an open, uniform and interconnected porous structure with a pore size of 200-400 microm. A compressive yield strength of approximately 5 MPa equivalent to that of cancellous bone and a compressive modulus of approximately 8 GPa similar to that of cortical bone were achieved. The pore morphology, size, and distribution of the scaffolds were characterized using a scanning electron microscope. X-ray diffraction and Fourier transform infrared spectroscopy were used to determine the crystal structure and chemical composition of scaffolds, respectively. Scaffolds with desired porosity, pore size, and geometry can be prepared by using polymer sponges of appropriate structures.

Biocompatible Materials↗

PubMed2003

Calcium phosphate-chitosan composite scaffolds for bone tissue engineering.

Macroporous calcium phosphate-chitosan composite scaffolds were fabricated and evaluated for use in bone tissue engineering. Human osteoblast-like MG63 cells were cultured on the composite scaffolds, and their response to the materials was studied. Cell morphology, total protein content, and expression of classic markers for osteoblast differentiation were characterized. MG63 cells on the hydroxyapatite scaffolds nesting chitosan sponges (HC1) showed significantly higher alkaline phosphatase (ALP) level and osteocalcin (OC) production during the 11-day culture period, compared with the control culture on tissue culture plates. Cells on the chitosan scaffolds incorporated with hydroxyapatite powders (HC2) exhibited lower ALP activity during the 11-day culture period and OC secretion during the first 7 days, in comparison with that on HC1. The addition of calcium phosphate glass as in HC3 scaffolds increased the ALP and OC levels of MG63 cells. Our study indicated that the hydroxyapatite-matrix composite scaffolds might enhance the phenotype expression of MG63 cells, in comparison with chitosan-matrix scaffolds. Soluble calcium phosphate glasses should be added to the scaffolds to prevent chitosan from fast degradation that may affect the differentiation of osteoblast cells.

Alkaline Phosphatase↗

PubMed2002

Calcium phosphate/chitosan composite scaffolds for controlled in vitro antibiotic drug release.

Macroporous chitosan scaffolds reinforced by beta-tricalcium phosphate (beta-TCP) and calcium phosphate invert glasses were fabricated using a thermally induced phase separation technique. These porous composite materials were specially designed as both a drug carrier for controlled drug release and a scaffold for bone regeneration. The controlled drug release of antibiotic gentamicin-sulfate (GS) loaded scaffolds and morphology of osteosarcoma MG63 cells cultured on the scaffolds were studied. In comparison with the GS loaded pure chitosan scaffolds, the initial burst release of GS was decreased through incorporating calcium phosphate crystals and glasses into the scaffolds, and the sustained release for more than 3 weeks was achieved. The possible mechanisms for the controlled drug release were investigated by SEM, FTIR, and measurements of the pH values of the PBS solution during the drug release test. SEM micrographs showed no apparent morphological differences for osteoblastic cells grown on the pure chitosan scaffolds and those grown on composite scaffolds. The cells were attached and migrated on these scaffolds, and exhibited a biological appearance, suggesting a good cellular compatibility.

Anti-Bacterial Agents↗