PubMed Health⌕ Search

Biomedical subjects

Miquel Costas

Publications and source records attributed to Miquel Costas.

At least 19 recordsLinked to original sources

Redox-controlled molecular flipper based on a chiral Cu complex.

A molecular bipaddled flipper based on a tetradentate chiral Cu complex has been designed. The paddling motion of this unprecedented molecular-scale machine can be controlled by reversible oxidation of the metal center. Kinetic and computational (density functional theory) analyses provide a detailed picture of the flipper motion at the molecular scale, rationalize the switching role of the metal-ion oxidation state, and pose the basis for the fine-tuning of the dynamic motion of this new class of molecular-scale devices.

Journal Article↗

Ligand topology effects on olefin oxidations by bio-inspired [FeII(N2Py2)] catalysts.

Linear tetradentate N2Py2 ligands can coordinate to an octahedral FeII center in three possible topologies (cis-alpha, cis-beta, and trans). While for the N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane (bpmen) complex, only the cis-alpha topology has been observed, for N,N'-bis(2-pyridylmethyl)-1,2-diaminocyclohexane (bpmcn) both cis-alpha and cis-beta isomers have been reported. To date, no facile interconversion between cis-alpha and cis-beta topologies has been observed for ironII complexes even at high temperatures. However, this work provides evidence for facile interconversion in solution of cis-alpha, cis-beta, and trans topologies for [Fe(bpmpn)X2] (bpmpn=N,N'-bis(2-pyridylmethyl)-1,3-diaminopropane; X=triflate, CH3CN) complexes. As reported previously, the catalytic behavior of cis-alpha and cis-beta isomers of [Fe(bpmcn)(OTf)2] with respect to olefin oxidation depends dramatically on the geometry adopted by the iron complex. To establish a general pattern of the catalysis/topology dependence, this work presents an extended comparison of the catalytic behavior for oxidation of olefins of a family of [Fe(N2py2)] complexes that present different topologies. 18O labeling experiments provide evidence for a complex mechanistic landscape in which several pathways should be considered. Complexes with a trans topology catalyze only non-water-assisted epoxidation. In contrast, complexes with a cis-alpha topology, such as [Fe(bpmen)X2] and [Fe(alpha-bpmcn)(OTf)2], can catalyze both epoxidation and cis-dihydroxylation through a water-assisted mechanism. Surprisingly, [Fe(bpmpn)X2] and [Fe(beta-bpmcn)(OTf)2] catalyze epoxidation via a water-assisted pathway and cis-dihydroxylation via a non-water-assisted mechanism, a result that requires two independent and distinct oxidants.

Alkenes↗

Copper(II) hexaaza macrocyclic binuclear complexes obtained from the reaction of their copper(I) derivates and molecular dioxygen.

Density functional theory (DFT) calculations have been carried out for a series of Cu(I) complexes bearing N-hexadentate macrocyclic dinucleating ligands and for their corresponding peroxo species (1c-8c) generated by their interaction with molecular O2. For complexes 1c-7c, it has been found that the side-on peroxodicopper(II) is the favored structure with regard to the bis(mu-oxo)dicopper(III). For those complexes, the singlet state has also been shown to be more stable than the triplet state. In the case of 8c, the most favored structure is the trans-1,2-peroxodicopper(II) because of the para substitution and the steric encumbrance produced by the methylation of the N atoms. Cu(II) complexes 4e, 5e, and 8e have been obtained by O2 oxidation of their corresponding Cu(I) complexes and structurally and magnetically characterized. X-ray single-crystal structures for those complexes have been solved, and they show three completely different types of Cu(II)2 structures: (a) For 4e, the Cu(II) centers are bridged by a phenolate group and an external hydroxide ligand. The phenolate group is generated from the evolution of 4c via intramolecular arene hydroxylation. (b) For 5e, the two Cu(II) centers are bridged by two hydroxide ligands. (c) For the 8e case, the Cu(II) centers are ligated to terminally bound hydroxide ligands, rare because of its tendency to bridge. The evolution of complexes 1c-8c toward their oxidized species has also been rationalized by DFT calculations based mainly on their structure and electrophilicity. The structural diversity of the oxidized species is also responsible for a variety of magnetic behavior: (a) strong antiferromagnetic (AF) coupling with J = -482.0 cm(-1) (g = 2.30; rho = 0.032; R = 5.6 x 10(-3)) for 4e; (b) AF coupling with J = -286.3 cm(-1) (g = 2.07; rho = 0.064; R = 2.6 x 10(-3)) for 5e; (c) an uncoupled Cu(II)2 complex for 8e.

Journal Article↗

Isomeric molecular rectangles resulting from self-assembly of dicopper complexes of macrocyclic ligands.

Dinuclear copper complexes containing hexaazacyclophane macrocyclic ligands react with the disodium salt of terephthalic acid resulting in the self-assembly of rectangular molecules with the general formula [(Cu2L)2(p-(O2CC6H4CO2)2)]X4, where X = CF3SO3 and ClO4 (3X4, L = Me2p and 4X4, L = Me2m). Tetranuclear complexes 3(CF3SO3)4 (as polymorphs 3a and 3b) and 4(ClO4)4 have been characterized by single-crystal X-ray diffraction analysis providing definitive proof of their structure as well as their metrical parameters. 3a contains, in its unit cell, two isomeric cationic units (3asyn and 3aanti) that differ in the relative position of the two O carboxylate atoms which bind to the Cu atoms of the different macrocyclic complexes, leading to boxes with different metrical parameters. ESI-MS analyses of solutions of the tetranuclear complexes 3(CF3SO3)4 and 4(CF3SO3)4 exhibit cluster ions which match the solid state formulation, thus demonstrating that the cages are retained in solution.

Copper↗

Oxoiron(IV) complexes of the tris(2-pyridylmethyl)amine ligand family: effect of pyridine alpha-substituents.

The oxoiron(IV) complexes of two 6-substituted tris(2-pyridylmethyl)amine ligand derivatives have been generated and characterized with respect to their spectroscopic and reactivity properties. The introduction of an alpha-substituent maintains the low-spin nature of the oxoiron(IV) unit but weakens the ligand field, as evidenced by red shifts in its characteristic near-IR chromophore. While its hydrogen-atom abstraction ability is only slightly affected, the oxo-transfer reactivity of the oxoiron(IV) center is significantly enhanced relative to that of the parent complex. These results demonstrate that the ligand environment plays a key role in modulating the reactivity of this important biological oxidant.

Iron Compounds↗

High-valent nonheme iron. Two distinct iron(IV) species derived from a common iron(II) precursor.

The reaction of [Fe(II)(beta-BPMCN)(OTf)2] (1, BPMCN = N,N'-bis(2-pyridylmethyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane) with tBuOOH at low-temperature yields alkylperoxoiron(III) intermediates 2 in CH2Cl2 and 2-NCMe in CH3CN. At -45 degrees C and above, 2-NCMe converts to a pale green species 3 (lambda(max) = 753 nm, epsilon = 280 M(-1) cm(-1)) in 90% yield, identified as [Fe(IV)(O)(BPMCN)(NCCH3)]2+ by comparison to other nonheme [Fe(IV)(O)(L)]2+ complexes. Below -55 degrees C in CH2Cl2, 2 decays instead to form deep turquoise 4 (lambda(max) = 656, 845 nm; epsilon = 4000, 3600 M(-1) cm(-1)), formulated to be an unprecedented alkylperoxoiron(IV) complex [Fe(IV)(BPMCN)(OH)(OOtBu)]2+ on the basis of Mössbauer, EXAFS, resonance Raman, NMR, and mass spectral evidence. The reactivity of 1 with tBuOOH in the two solvents reveals an unexpectedly rich iron(IV) chemistry that can be supported by the BPMCN ligand.

Cold Temperature↗

XAS characterization of end-on and side-on peroxoiron(III) complexes of the neutral pentadentate N-donor ligand N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine.

Peroxo intermediates are implicated in the catalytic cycles of iron enzymes involved in dioxygen metabolism. X-ray absorption spectroscopy has been used to gain insight into the iron coordination environments of the low-spin complex [Fe(III)(Me-TPEN)(eta(1)-OOH)](2+)(1) and the high-spin complex [Fe(III)(Me-TPEN)(eta(2)-O(2))](+)(2)(the neutral pentadentate N-donor ligand Me-TPEN =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine) and obtain metrical parameters unavailable from X-ray crystallography. The complexes exhibit relatively large pre-edge peak areas of approximately 15 units, indicative of iron centers with significant distortions from centrosymmetry. These distortions result from the binding of peroxide, either end-on hydroperoxo for 1 (r(Fe-O)= 1.81A) or side-on peroxo for 2 (r(Fe-O)= 1.99 A). The XAS analyses of 1 strongly support a six-coordinate low-spin iron(III) center coordinated to five nitrogen atoms from Me-TPEN and one oxygen atom from an end-on hydroperoxide ligand. However, the XAS analyses of 2 are not conclusive: Me-TPEN can act either as a pentadentate ligand to form a seven-coordinate peroxo complex, which has precedence in the DFT geometry optimization of [Fe(III)(N4Py)(eta(2)-O(2))](+)(the neutral pentadentate N-donor ligand N4Py =N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine), or as a tetradentate ligand with a dangling pyridylmethyl arm to form a six-coordinate peroxo complex, which is precedented by the crystal structure of [Fe(2)(III)(Me-TPEN)(2)(Cl)(2)(mu-O)](2+).

Ethylenediamines↗

A structural and Mössbauer study of complexes with Fe(2)(micro-O(H))(2) cores: stepwise oxidation from Fe(II)(micro-OH)(2)Fe(II) through Fe(II)(micro-OH)(2)Fe(III) to Fe(III)(micro-O)(micro-OH)Fe(III).

Dinuclear non-heme iron clusters containing oxo, hydroxo, or carboxylato bridges are found in a number of enzymes involved in O(2) metabolism such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases. Efforts to model structural and/or functional features of the protein-bound clusters have prompted the preparation and study of complexes that contain Fe(micro-O(H))(2)Fe cores. Here we report the structures and spectroscopic properties of a family of diiron complexes with the same tetradentate N4 ligand in one ligand topology, namely [(alpha-BPMCN)(2)Fe(II)(2)(micro-OH)(2)](CF(3)SO(3))(2) (1), [(alpha-BPMCN)(2)Fe(II)Fe(III)(micro-OH)(2)](CF(3)SO(3))(3) (2), and [(alpha-BPMCN)(2)Fe(III)(2)(micro-O)(micro-OH)](CF(3)SO(3))(3) (3) (BPMCN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-trans-1,2-diaminocyclohexane). Stepwise one-electron oxidations of 1 to 2 and then to 3 demonstrate the versatility of the Fe(micro-O(H))(2)Fe diamond core to support a number of oxidation states with little structural rearrangement. Insight into the electronic structure of 1, 2', and 3 has been obtained from a detailed Mössbauer investigation (2' differs from 2 in having a different complement of counterions). Mixed-valence complex 2' is ferromagnetically coupled, with J = -15 +/- 5 cm(-)(1) (H = JS(1).S(2)). For the S = (9)/(2) ground multiplet we have determined the zero-field splitting parameter, D(9/2) = -1.5 +/- 0.1 cm(-)(1), and the hyperfine parameters of the ferric and ferrous sites. For T < 12 K, the S = (9)/(2) multiplet has uncommon relaxation behavior. Thus, M(S) = -(9)/(2) <--> M(S) = +(9)/(2) ground state transition is slow while deltaM(S) = +/-1 transitions between equally signed M(S) levels are fast on the time scale of Mössbauer spectroscopy. Below 100 K, complex 2' is trapped in the Fe(1)(III)Fe(2)(II) ground state; above this temperature, it exhibits thermally assisted electron hopping into the state Fe(1)(II)Fe(2)(III). The temperature dependence of the isomer shifts was corrected for second-order Doppler shift, obtained from the study of diferrous 1. The resultant true shifts were analyzed in a two-state hopping model. The diferric complex 3 is antiferromagnetically coupled with J = 90 +/- 15 cm(-)(1), estimated from a variable-temperature Mössbauer analysis.

Binding Sites↗

Role of carboxylate bridges in modulating nonheme diiron(II)/O(2) reactivity.

A series of diiron(II) complexes of the dinucleating ligand HPTP (N,N,N',N'-tetrakis(2-pyridylmethyl)-2-hydroxy-1,3-diaminopropane) with one or two supporting carboxylate bridges has been synthesized and characterized. The crystal structure of one member of each subset has been obtained to reveal for subset A a (micro-alkoxo)(micro-carboxylato)diiron(II) center with one five- and one six-coordinate metal ion and for subset B a coordinatively saturated (micro-alkoxo)bis(micro-carboxylato)diiron(II) center. These complexes react with O(2) in second-order processes to form adducts characterized as (micro-1,2-peroxo)diiron(III) complexes. Stopped-flow kinetic studies show that the oxygenation step is sensitive to the availability of an O(2) binding site on the diiron(II) center, as subset B reacts more slowly by an order of magnitude. The lifetimes of the O(2) adducts are also distinct and can be modulated by the addition of oxygen donor ligands. The O(2) adduct of a monocarboxylate complex decays by a fast second-order process that must be monitored by stopped-flow methods, but becomes stabilized in CH(2)Cl(2)/DMSO (9:1 v/v) and decomposes by a much slower first-order process. The O(2) adduct of a dicarboxylate complex is even more stable in pure CH(2)Cl(2) and decays by a first-order process. These differences in adduct stability are reflected in the observation that only the O(2) adducts of monocarboxylate complexes can oxidize substrates, and only those substrates that can bind to the diiron center. Thus, the much greater stability of the O(2) adducts of dicarboxylate complexes can be rationalized by the formation of a (micro-alkoxo)(micro-1,2-peroxo)diiron(III) complex wherein the carboxylate bridges in the diiron(II) complex become terminal ligands in the O(2) adduct, occupy the remaining coordination sites on the diiron center, and prevent binding of potential substrates. Implications for the oxidation mechanisms of nonheme diiron enzymes are discussed.

Carboxylic Acids↗

Iron-catalyzed olefin cis-dihydroxylation by H2O2: electrophilic versus nucleophilic mechanisms.

Previous studies have classified a series of nonheme iron catalysts for olefin cis-dihydroxylation by H2O2 into two groups. Complex 1, [(TPA)Fe(OTf)2], representative of Class A catalysts, forms a low-spin FeIII-OOH intermediate that gives rise to a high-valent FeV(=O)OH oxidant. The preference of this catalyst for electron-rich olefins demonstrates its electrophilic character. On the other hand, complex 2, [(6-Me3-TPA)Fe(OTf)2], representative of Class B catalysts, prefers instead to oxidize electron-deficient olefins, suggesting an oxidant with nucleophilic character. It is suggested that such a nucleophilic oxidant may be the high-spin FeIII-OOH intermediate derived from 2 or the FeIV(=O)(*OH) species derived therefrom.

Alcohols↗

Dinuclear copper(I) complexes with hexaaza macrocyclic dinucleating ligands: structure and dynamic properties.

The synthesis and structural and spectroscopic characterization of a family of copper(I) complexes, containing a dinucleating hexaaza macrocyclic ligand, of general formula [Cu(2)(L)(X)(2)](2+) (L = Me2p, Me2m, Me3p, or Me3m; X = MeCN, n-PrCN, CO, t-BuNC, or PPh(3)) is described. This family of complexes contains ligands that differ from one another in the number of methylenic units linking the tertiary amines and in the meta or para substitution of their aromatic rings. The structural characterization in the solid-state includes a single-crystal X-ray diffraction analysis of [Cu(2)(Me2p)(CO)(2)](2+) and of [Cu(2)(Me2m)(t-BuNC)(2)](2+). In solution, those complexes are structurally characterized through NMR spectroscopy that also allows us to put forward and establish their fluxional behavior. Theoretical calculations at the DFT level have also been performed in order to further analyze the relative energy of the different potential isomers as well as to gain insight into their chemical properties. Finally, the influence of the hexaaza ligands over different structural aspects as well as on its potential chemical reactivity is discussed.

Journal Article↗

An FeIV=O complex of a tetradentate tripodal nonheme ligand.

The reaction of [Fe(II)(tris(2-pyridylmethyl)amine, TPA)(NCCH(3))(2)](2+) with 1 equiv. peracetic acid in CH(3)CN at -40 degrees C results in the nearly quantitative formation of a pale green intermediate with lambda(max) at 724 nm ( epsilon approximately 300 M(-1).cm(-1)) formulated as [Fe(IV)(O)(TPA)](2+) by a combination of spectroscopic techniques. Its electrospray mass spectrum shows a prominent feature at mz 461, corresponding to the [Fe(IV)(O)(TPA)(ClO(4))](+) ion. The Mössbauer spectra recorded in zero field reveal a doublet with DeltaE(Q) = 0.92(2) mms and delta = 0.01(2) mms; analysis of spectra obtained in strong magnetic fields yields parameters characteristic of S = 1 Fe(IV)O complexes. The presence of an Fe(IV)O unit is also indicated in its Fe K-edge x-ray absorption spectrum by an intense 1-s --> 3-d transition and the requirement for an ON scatterer at 1.67 A to fit the extended x-ray absorption fine structure region. The [Fe(IV)(O)(TPA)](2+) intermediate is stable at -40 degrees C for several days but decays quantitatively on warming to [Fe(2)(mu-O)(mu-OAc)(TPA)(2)](3+). Addition of thioanisole or cyclooctene at -40 degrees C results in the formation of thioanisole oxide (100% yield) or cyclooctene oxide (30% yield), respectively; thus [Fe(IV)(O)(TPA)](2+) is an effective oxygen-atom transfer agent. It is proposed that the Fe(IV)O species derives from OO bond heterolysis of an unobserved Fe(II)(TPA)-acyl peroxide complex. The characterization of [Fe(IV)(O)(TPA)](2+) as having a reactive terminal Fe(IV)O unit in a nonheme ligand environment lends credence to the proposed participation of analogous species in the oxygen activation mechanisms of many mononuclear nonheme iron enzymes.

Drug Stability↗

4-nitrocatechol as a probe of a Mn(II)-dependent extradiol-cleaving catechol dioxygenase (MndD): comparison with relevant Fe(II) and Mn(II) model complexes.

Mn(II)-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase (MndD) is an extradiol-cleaving catechol dioxygenase from Arthrobacter globiformis that has 82% sequence identity to and cleaves the same substrate (3,4-dihydroxyphenylacetic acid) as Fe(II)-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase (HPCD) from Brevibacterium fuscum. We have observed that MndD binds the chromophoric 4-nitrocatechol (4-NCH(2)) substrate as a dianion and cleaves it extremely slowly, in contrast to the Fe(II)-dependent enzymes which bind 4-NCH(2) mostly as a monoanion and cleave 4-NCH(2) 4-5 orders of magnitude faster. These results suggest that the monoanionic binding state of 4-NC is essential for extradiol cleavage. In order to address the differences in 4-NCH(2) binding to these enzymes, we synthesized and characterized the first mononuclear monoanionic and dianionic Mn(II)-(4-NC) model complexes as well as their Fe(II)-(4-NC) analogs. The structures of [(6-Me(2)-bpmcn)Fe(II)(4-NCH)](+), [(6-Me(3)-TPA)Mn(II)(DBCH)](+), and [(6-Me(2)-bpmcn)Mn(II)(4-NCH)](+) reveal that the monoanionic catecholate is bound in an asymmetric fashion (Delta r(metal-O(catecholate))=0.25-0.35 A), as found in the crystal structures of the E(.)S complexes of extradiol-cleaving catechol dioxygenases. Acid-base titrations of [(L)M(II)(4-NCH)](+) complexes in aprotic solvents show that the p K(a) of the second catecholate proton of 4-NCH bound to the metal center is half a p K(a) unit higher for the Mn(II) complexes than for the Fe(II) complexes. These results are in line with the Lewis acidities of the two divalent metal ions but are the opposite of the trend observed for 4-NCH(2) binding to the Mn(II)- and Fe(II)-catechol dioxygenases. These results suggest that the MndD active site decreases the second p K(a) of the bound 4-NCH(2) relative to the HPCD active site.

Arthrobacter↗

Olefin cis-dihydroxylation versus epoxidation by non-heme iron catalysts: two faces of an Fe(III)-OOH coin.

The oxygenation of carbon-carbon double bonds by iron enzymes generally results in the formation of epoxides, except in the case of the Rieske dioxygenases, where cis-diols are produced. Herein we report a systematic study of olefin oxidations with H(2)O(2) catalyzed by a group of non-heme iron complexes, i.e., [Fe(II)(BPMEN)(CH(3)CN)(2)](2+) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [Fe(II)(TPA)(CH(3)CN)(2)](2+) (4, TPA = tris(2-pyridylmethyl)amine) and their 6- and 5-methyl-substituted derivatives. We demonstrate that olefin epoxidation and cis-dihydroxylation are different facets of the reactivity of a common Fe(III)-OOH intermediate, whose spin state can be modulated by the electronic and steric properties of the ligand environment. Highly stereoselective epoxidation is favored by catalysts with no more than one 6-methyl substituent, which give rise to low-spin Fe(III)-OOH species (category A). On the other hand, cis-dihydroxylation is favored by catalysts with more than one 6-methyl substituent, which afford high-spin Fe(III)-OOH species (category B). For catalysts in category A, both the epoxide and the cis-diol product incorporate (18)O from H(2)(18)O, results that implicate a cis-H(18)O-Fe(V)=O species derived from O-O bond heterolysis of a cis-H(2)(18)O-Fe(III)-OOH intermediate. In contrast, catalysts in category B incorporate both oxygen atoms from H(2)(18)O(2) into the dominant cis-diol product, via a putative Fe(III)-eta(2)-OOH species. Thus, a key feature of the catalysts in this family is the availability of two cis labile sites, required for peroxide activation. The olefin epoxidation and cis-dihydroxylation studies described here not only corroborate the mechanistic scheme derived from our earlier studies on alkane hydroxylation by this same family of catalysts (Chen, K.; Que, L, Jr. J. Am. Chem. Soc. 2001, 123, 6327) but also further enhance its credibility. Taken together, these reactions demonstrate the catalytic versatility of these complexes and provide a rationale for Nature's choice of ligand environments in biocatalysts that carry out olefin oxidations.

Alkenes↗