PubMed Health⌕ Search

Biomedical subjects

Miriam Rafailovich

Publications and source records attributed to Miriam Rafailovich.

9 recordsLinked to original sources

Cell adaptation to a physiologically relevant ECM mimic with different viscoelastic properties.

To successfully induce tissue repair or regeneration in vivo, bioengineered constructs must possess both optimal bioactivity and mechanical strength. This is because cell interaction with the extracellular matrix (ECM) produces two different but concurrent signaling mechanisms: ligation-induced signaling, which depends on ECM biological stimuli, and traction-induced signaling, which depends on ECM mechanical stimuli. In this report, we provide a fundamental understanding of how alterations in mechanical stimuli alone, produced by varying the viscoelastic properties of our bioengineered construct, modulate phenotypic behavior at the whole-cell level. Using a physiologically relevant ECM mimic composed of hyaluronan and fibronectin, we found that adult human dermal fibroblasts modify their mechanical response in order to match substrate stiffness. More specifically, the cells on stiffer substrates had higher modulus and a more stretched and organized actin cytoskeleton (and vice versa), which translated into larger traction forces exerted on the substrate. This modulation of cellular mechanics had contrasting effects on migration and proliferation, where cells migrated faster on softer substrates while proliferating preferentially on the stiffer ones. These findings implicate substrate rigidity as a critical design parameter in the development of bioengineered constructs aimed at eliciting maximal cell and tissue function.

Actins↗

Separation of DNA with different configurations on flat and nanopatterned surfaces.

We demonstrate that electrophoresis on a flat Si substrate is an effective method in separation of DNA with different configurations, e.g., linear, supercoiled, and relaxed or DNA of different length, e.g., supercoiled DNA ladder. The surface separation arises from the different number of contacts due to the conformational differences between adsorbed DNA chains. Imposing a Au nanopattern on the Si surface further improves the separation effect. The simulation of electric field on this patterned surface by the finite element method shows that Au nanodots act as local pinning points for DNA segments due to dielectrophoretic force. The results of molecular dynamics simulation showed that the conformational differences between adsorbed polymer chains were amplified on the patterned surface and enhanced separations were achieved, which are consistent with the experimental results.

Computer Simulation↗

Influence of electric field intensity, ionic strength, and migration distance on the mobility and diffusion in DNA surface electrophoresis.

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.

Bacteriophage lambda↗

Adverse effects of citrate/gold nanoparticles on human dermal fibroblasts.

Nanoscale engineering is one of the most dynamically growing areas at the interface between electronics, physics, biology, and medicine. As there are no safety regulations yet, concerns about future health problems are rising. We investigated the effects of citrate/gold nanoparticles at different concentrations and exposure times on human dermal fibroblasts. We found that, as a result of intracellular nanoparticle presence, actin stress fibers disappeared, thereby inducing major adverse effects on cell viability. Thus, properties such as cell spreading and adhesion, cell growth, and protein synthesis to form the extracellular matrix were altered dramatically. These results suggest that the internal cell activities have been damaged.

Cell Adhesion↗

Synthesis of zerovalent nanophase metal particles stabilized with poly(ethylene glycol).

Concurrent sonolysis of iron pentacarbonyl and poly(ethylene glycol)-400 (PEG-400) in hexadecane solvent proceeds via zero-order kinetics and results in Fe nanoparticles encapsulated in PEG-400 (Fe-PEG). The transmission electron microscopy images show Fe-PEG consisting of <3 nm Fe particles that are evenly dispersed in the PEG matrix. Mössbauer and X-ray absorption fine structure/X-ray absorption near-edge structure data reveal an ordered PEG assembly that helps protect the zerovalent Fe core. The Fe nanoparticles in Fe-PEG are superparamagnetic with a magnetization value of 45 emu/g-Fe at 10 KOe. The rheology of the synthesized material shows an unusual increase in viscosity with temperature that is likely due to lower critical saturation temperature phase segregation over 40 degrees C. The low-temperature mobility of the PEG-400 moiety in Fe-PEG would allow facile ligation of the Fe0 core with biologically and chemically active groups.

Journal Article↗

Determining the mechanical properties of rat skin with digital image speckle correlation.

BACKGROUND: Accurate measurement of the mechanical properties of skin has numerous implications in surgical repair, dermal disorders and the diagnosis and treatment of trauma to the skin. Investigation of facial wrinkle formation, as well as research in the areas of skin aging and cosmetic product assessment can also benefit from alternative methodologies for the measurement of mechanical properties. OBJECTIVE: A noncontact, noninvasive technique, digital image speckle correlation (DISC), has been successfully introduced to measure the deformation field of a skin sample loaded by a material test machine. With the force information obtained from the loading device, the mechanical properties of the skin, such as Young's modulus, linear limitation and material strength, can be calculated using elastic or viscoelastic theory. METHODS: The DISC method was used to measure the deformation of neonatal rat skin, with and without a glycerin-fruit-oil-based cream under uniaxial tension. RESULTS: Deformation to failure procedure of newborn rat skin was recorded and analyzed. Single skin layer failures were observed and located by finding the strain concentration. Young's moduli of freshly excised rat skin, cream-processed rat skin and unprocessed rat skin, 24 h after excision, were found with tensile tests to be 1.6, 1.4 and 0.7 MPa, respectively. CONCLUSION: Our results have shown that DISC provides a novel technique for numerous applications in dermatology and reconstructive surgeries.

Animals↗

Fibronectin fibrillogenesis on sulfonated polystyrene surfaces.

Extracellular matrix (ECM) protein adsorption and organization serves as a critical first step in the development and organization of tissues. Advances in tissue engineering, therefore, will depend on the ability to control the rate and pattern of ECM formation. Fibronectin is a prominent component of the ECM, which undergoes fibrillogenesis in the presence of cells. Using sulfonated polysyrene surfaces, we showed that fibronectin undergoes a transition from monolayer to multilayer adsorption at calculated surface charge densities above 0.03 Coulombs (C)/m(2). At charge densities above approximately 0.08 C/m(2), distinct fibronectin fibrillar networks are observed to form with a fibril morphology similar to those observed to form in situ on cell surfaces. This self-organization process is time dependent, with the fibrils achieving dimensions of 30-40 microm in length and 1 microm in height after 72 h of incubation. We suggest that the polarization of charge domains on the polyampholytic fibronectin molecules near high charge density surfaces is sufficient to initiate the multilayer adsorption and the organization of these fibrillar structures. These results suggest that the nonlinear dependence of adsorption on surface charge density may play an important role in the self-organization of many matrix components.

Adsorption↗

DNA capillary electrophoresis using poly(vinyl alcohol). I. Inner capillary coating.

Two new methods of inner capillary coating with poly(vinyl alcohol) (PVAL) have been investigated and evaluated by performing DNA capillary electrophoresis (CE) using PVAL as a separation medium and by measuring the electroosmotic flow (EOF) mobility. The treatment of capillaries with a silanol-group modified PVAL (PVAL-Si) has been found to give good coating effects for improving the resolution of DNA CE and for reducing the EOF. This coating must be effectively achieved by combining the adsorptive property of PVAL chains onto silica with the reaction between the silanol groups of PVAL-Si and the silica surface. The adsorption of PVAL onto silica has been observed by using atomic force microscopy (AFM) for PVAL-Si as well as for a nonmodified PVAL as a control. The coating with PVAL that links to the capillary wall surface with more hydrolytically stable bonding, -Si-C-, has been formed by performing the Grignard reaction, followed by in-capillary polymerization of vinyl acetate (VAc) and hydrolysis. This coating has been found to be effective for improving the resolution of DNA CE and for reducing the EOF.

Adsorption↗

DNA separation at a liquid-solid interface.

We demonstrate that it is possible to separate a broad band of DNA on a solid substrate without topological obstacles. The mobility was found to scale with molecular size (N) as N(-0.25), while the resolution scaled as N(0.75) indicating that diffusivity on this substrate was minimal. By varying the buffer concentration we were able to show that the mobility for a given chain length scaled with the persistent length (p) as p(1/2). This could be shown to be related to the Gaussian conformation of the chains adsorbed on the surface. A two-dimensional corrugated surface of nonporous silica beads was produced using a self-assembling process at the air/water interface. Even though the surface corrugations were comparable to persistence length we show that they do not affect the mobility, indicating that surface friction rather than topological constraints are the predominant mechanism of separation on a surface.

Adsorption↗