PubMed Health⌕ Search

Biomedical subjects

Mitsunori Kato

Publications and source records attributed to Mitsunori Kato.

8 recordsLinked to original sources
PubMed2006

The barrier for proton transport in aquaporins as a challenge for electrostatic models: the role of protein relaxation in mutational calculations.

The origin of the barrier for proton transport through the aquaporin channel is a problem of general interest. It is becoming increasingly clear that this barrier is not attributable to the orientation of the water molecules across the channel but rather to the electrostatic penalty for moving the proton charge to the center of the channel. However, the reason for the high electrostatic barrier is still rather controversial. It has been argued by some workers that the barrier is due to the so-called NPA motif and/or to the helix macrodipole or to other specific elements. However, our works indicated that the main reason for the high barrier is the loss of the generalized solvation upon moving the proton charge from the bulk to the center of the channel and that this does not reflect a specific repulsive electrostatic interaction but the absence of sufficient electrostatic stabilization. At this stage it seems that the elucidation and clarification of the origin of the electrostatic barrier can serve as an instructive test case for electrostatic models. Thus, we reexamine the free-energy surface for proton transport in aquaporins using the microscopic free-energy perturbation/umbrella sampling (FEP/US) and the empirical valence bond/umbrella sampling (EVB/US) methods as well as the semimacroscopic protein dipole Langevin dipole model in its linear response approximation version (the PDLD/S-LRA). These extensive studies help to clarify the nature of the barrier and to establish the "reduced solvation effect" as the primary source of this barrier. That is, it is found that the barrier is associated with the loss of the generalized solvation energy (which includes of course all electrostatic effects) upon moving the proton charge from the bulk solvent to the center of the channel. It is also demonstrated that the residues in the NPA region and the helix dipole cannot be considered as the main reasons for the electrostatic barrier. Furthermore, our microscopic and semimacroscopic studies clarify the problems with incomplete alternative calculations, illustrating that the effects of various electrostatic elements are drastically overestimated by macroscopic calculations that use a low dielectric constant and do not consider the protein reorganization. Similarly, it is pointed out that microscopic potential of mean force calculations that do not evaluate the electrostatic barrier relative to the bulk water cannot be used to establish the origin of the electrostatic barrier. The relationship between the present study and calculations of pK(a)s in protein interiors is clarified, pointing out that approaches that are applied to study the aquaporin barrier should be validated by pK(a)s calculations. Such calculations also help to clarify the crucial role of solvation energies in establishing the barrier in aquaporins.

Aquaporins↗
PubMed2006

Modeling electrostatic effects in proteins.

Electrostatic energies provide what is perhaps the most effective tool for structure-function correlation of biological molecules. This review considers the current state of simulations of electrostatic energies in macromolecules as well as the early developments of this field. We focus on the relationship between microscopic and macroscopic models, considering the convergence problems of the microscopic models and the fact that the dielectric 'constants' in semimacroscopic models depend on the definition and the specific treatment. The advances and the challenges in the field are illustrated considering a wide range of functional properties including pK(a)'s, redox potentials, ion and proton channels, enzyme catalysis, ligand binding and protein stability. We conclude by pointing out that, despite the current problems and the significant misunderstandings in the field, there is an overall progress that should lead eventually to quantitative descriptions of electrostatic effects in proteins and thus to quantitative descriptions of the function of proteins.

Models, Molecular↗
PubMed2006

Using a charging coordinate in studies of ionization induced partial unfolding.

The ionization of groups in proteins may sometimes involve a partial unfolding and/or water penetration. Unfortunately the corresponding structural changes might not be captured by microscopic free energy perturbation (FEP) approaches due to activation barriers that are not surmounted in nanosecond FEP simulations. This problem is apparent, for example, from mutation experiments that introduced ionizable groups in protein interiors and from the difficulties to reproduce the corresponding pKa changes by microscopic approaches. Here we develop a new general approach for treating such challenging cases. Our approach drives the protein structural change by increasing the charge of the ionized group beyond its physical value and thus overcoming the barriers for the partial unfolding by a physically consistent process. The potential of our approach is illustrated by the evaluation of the pKa of the Val66Glu mutant of staphylococcal nuclease. In this case it is first demonstrated that standard FEP approaches give extremely disappointing results for this pKa. On the other hand, our "overcharging" approach gives a much more realistic result. We believe that the present approach represents a breakthrough in FEP studies of ionizable residues in proteins, and expect this strategy to be useful in studies of a wide range of challenging problems including simulations of hydrogen exchange processes.

Hydrogen↗
PubMed2005

Through the channel and around the channel: Validating and comparing microscopic approaches for the evaluation of free energy profiles for ion penetration through ion channels.

Microscopic calculations of free energy profiles for ion transport through biological ion channels present a very serious challenge to modern simulation approaches. The main problem is due to the major convergence problems associated with the heterogeneous landscape of the electrostatic environment in ion channels and with the need to evaluate the profile associated with the transfer of the ion from bulk water to the channel environment. This problem is compounded by the lack of reliable and relevant benchmarks that can discriminate between alternative approaches. The present study is aimed at reducing the above problems by defining benchmarks that are directly relevant to ion channels and can also give converging results. This is done by constructing a series of models of a truncated gramicidin channel with different numbers of water molecules and by comparing the profiles for going around the channel and through the channel. These discriminating models are then used to validate and compare the adiabatic charging free energy perturbation (FEP) approach combined with an umbrella sampling approach (Warshel, A. J. Phys. Chem. 1982, 86, 2218) and the potential of mean force (PMF) approach used frequently in studies of ion channels. It is found that both approaches work quite well until one moves to the case of the fully solvated channel. In this limit, the PMF approach may give different results for the overall work of going through the channel and around the channel, while the FEP approach gives physically consistent results. The present benchmark also indicates that the weighted histogram analysis method (WHAM) approach does not offer a significant advantage over earlier approaches at least as much as studies of ion channels are concerned. Finally, it is concluded that the FEP approach may be more useful in evaluating the overall barrier for moving ions from water to ion channels and that in some cases it might be beneficial to use the FEP approach for selective points along the channel and then to connect these points by PMF calculations.

Algorithms↗
PubMed2005

What are the roles of substrate-assisted catalysis and proximity effects in peptide bond formation by the ribosome?

The action of the peptidyl transferase center of the large ribosomal unit presents a fundamental step in the evolution from the RNA world to the protein world. Thus, it is important to understand the origin of the catalytic power of this ancient enzyme. Earlier studies suggested that the ribosome catalyzes peptide bond formation by using one of its groups as a general base, while more recent works have proposed that the catalysis is due to proximity effects or to substrate-assisted catalysis. However, the actual nature of the catalytic mechanism remains controversial. This work addresses the origin of the catalytic power of the ribosome by using computer simulation approaches and comparing the energetics of the peptide bond formation in the ribosome and in water. It is found that a significant part of the observed activation entropy of the reference solution reaction is due to solvation entropy, and that the proximity effect is smaller than previously thought. It is also found that the 2'-OH of the A76 ribose, which is associated with a large rate acceleration in the ribosome reaction, does not catalyze peptide bond formation in water. Thus, the catalytic effect cannot be attributed to substrate-assisted catalysis but rather to the effect of the ribosome on the reacting system. Overall, our calculations indicate that the reduction of the activation free energy is mainly due to electrostatic effects. The nature of these effects and their relationship to catalytic factors in modern enzymes is analyzed and discussed.

Binding Sites↗
PubMed2003

Apparent NAC effect in chorismate mutase reflects electrostatic transition state stabilization.

The catalytic reaction of chorismate mutase (CM) has been the subject of major current attention. Nevertheless, the origin of the catalytic power of CM remains an open question. In particular, it has not been clear whether the enzyme works by providing electrostatic transition state stabilization (TSS), by applying steric strain, or by populating near attack conformation (NAC). The present work explores this issue by a systematic quantitative analysis. The overall catalytic effect is reproduced by the empirical valence bond (EVB) method. In addition, the binding free energy of the ground state and the transition state is evaluated, demonstrating that the enzyme works by TSS. Furthermore, the evaluation of the electrostatic contribution to the reduction of the activation energy establishes that the TSS results from electrostatic effects. It is also found that the apparent NAC effect is not the reason for the catalytic effect but the result of the TSS. It is concluded that in CM as in other enzymes the key catalytic effect is electrostatic TSS. However, since the charge distribution of the transition state and the reactant state is similar, the stabilization of the transition state leads to reduction in the distance between the reacting atoms in the reactant state.

Catalysis↗
PubMed2003

Exploring the origin of the ion selectivity of the KcsA potassium channel.

The availability of structural information about biological ion channels provides an opportunity to gain a detailed understanding of the control of ion selectivity by biological systems. However, accomplishing this task by computer simulation approaches is very challenging. First, although the activation barriers for ion transport can be evaluated by microscopic simulations, it is hard to obtain accurate results by such approaches. Second, the selectivity is related to the actual ion current and not directly to the individual activation barriers. Thus, it is essential to simulate the ion currents and this cannot be accomplished at present by microscopic MD approaches. In order to address this challenge, we developed and refined an approach capable of evaluating ion current while still reflecting the realistic features of the given channel. Our method involves generation of semimacroscopic free energy surfaces for the channel/ions system and Brownian dynamics (BD) simulations of the corresponding ion current. In contrast to most alternative macroscopic models, our approach is able to reproduce the difference between the free energy surfaces of different ions and thus to address the selectivity problem. Our method is used in a study of the selectivity of the KcsA channel toward the K+ and Na+ ions. The BD simulations with the calculated free energy profiles produce an appreciable selectivity. To the best of our knowledge, this is the first time that the trend in the selectivity in the ion current is produced by a computer simulation approach. Nevertheless, the calculated selectivity is still smaller than its experimental estimate. Recognizing that the calculated profiles are not perfect, we examine how changes in these profiles can account for the observed selectivity. It is found that the origin of the selectivity is more complex than generally assumed. The observed selectivity can be reproduced by increasing the barrier at the exit and the entrance of the selectivity filter, but the necessary changes in the barrier approach the limit of the error in the PDLD/S-LRA calculations. Other options that can increase the selectivity are also considered, including the difference between the Na+...Na+ and K+...K+ interaction. However, this interesting effect does not appear to lead to a major difference in selectivity since the Na+ ions at the limit of strong interaction tend to move in a less concerted way than the K+ ions. Changes in the relative binding energies at the different binding sites are also not so effective in changing the selectivity. Finally, it is pointed out that using the calculated profiles as a starting point and forcing the model to satisfy different experimentally based constraints, should eventually provide more detailed understanding of the different complex factors involved in ion selectivity of biological channels.

Algorithms↗