PubMed Health⌕ Search

Biomedical subjects

Mitsuru Akashi

Publications and source records attributed to Mitsuru Akashi.

67 records · Page 4Linked to original sources
PubMed2003

Controlled release of epidermal growth factor (EGF) from EGF-loaded polymeric nanoparticles composed of polystyrene as core and poly(methacrylic acid) as corona in vitro.

Polymeric nanoparticles composed of polystyrene (PS) as core and poly(methacrylic acid) (PMA) as corona were prepared by the dispersion copolymerization. The potential of the nanoparticles as carriers for recombinant human epidermal growth factor (EGF) was investigated. The nanoparticles showed monodispersity and good water-dispersibility. The loading content of EGF to the nanoparticles was very high due to electrostatic interaction between EGF and nanoparticles. EGF was released as a pseudo-zero order pattern after initial burst effect. The nanoparticles were sufficient for A431 cells proliferation.

DNA↗
PubMed2003

Cell-compatible properties of calcium carbonates and hydroxyapatite deposited on ultrathin poly(vinyl alcohol)-coated polyethylene films.

Poly(vinyl alcohol) (PVA) was coated onto polyethylene (PE) films by a repetitive adsorption and drying process, and then the PVA-coated PE films were alternately immersed into aqueous solutions of Ca2+ and CO3(2-) ions (alternate soaking cycles), to deposit calcium carbonate (CaCO3) onto the films. The PVA coating was essential for the CaCO3 deposition. The amount of CaCO3 deposited increased with an increasing number of cycles. Scanning electron microscopic observations and attenuated total reflection spectra revealed the presence of both calcite and aragonite as the crystal structures of CaCO3 on the film. L929 fibroblast cells adhered and proliferated on these CaCO3-deposited PE films, as well as the hydroxyapatite-coated PE films previously prepared. It was found that the PVA coating and the subsequent deposition of calcium salts on certain films facilitated cell compatibility.

Calcium Carbonate↗
PubMed2002

Behavior of mucoadhesive nanoparticles having hydrophilic polymeric chains in the intestine.

The behavior of nanoparticles having surface hydrophilic poly(N-isopropylacrylamide), poly(N-vinylacetamide), poly(vinylamine) or poly(methacrylic acid) chains in the intestine was examined. The permeability of salmon calcitonin (sCT) from the mucosal to serosal side of the everted jejunum was enhanced in the presence of nanoparticles. This enhancement, which correlated with the amount of sCT incorporated in nanoparticles, disappeared completely after removal of the mucous layer. When fluorescein isothiocyanate-dextran (FD-4) was used instead of sCT, its permeability through the everted jejunum with and without mucous layer was not enhanced by any nanoparticles, because FD-4 was not incorporated in nanoparticles at all. These findings indicated that the accumulation of nanoparticles incorporating sCT in the mucous layer resulted in the enhancement of sCT permeability. Nanoparticles with poly(N-isopropylacrylamide) or poly(vinylamine) on their surfaces did not cause any damage to the intestinal mucosa. Also, none of the nanoparticles opened the tight junction of the intestinal membrane. It was concluded that mucoadhesion of nanoparticles incorporating sCT to the gastrointestinal mucosa contributed to the absorption enhancement of sCT.

Alkaline Phosphatase↗
PubMed2002

Optimized chemical structure of nanoparticles as carriers for oral delivery of salmon calcitonin.

Nanoparticles having two kinds of surface hydrophilic polymeric chains were prepared by the free radical copolymerization between styrene and hydrophilic macromonomers terminating in vinylbenzyl groups. Their potential as carriers for oral peptide delivery was investigated using salmon calcitonin (sCT) in rats. After oral administration of mixtures of sCT and nanoparticles, the ionized calcium concentration in blood was measured. The absorption of sCT was significantly enhanced by nanoparticles having poly-N-isopropylacrylamide (PNIPAAm) chains on their surfaces. This enhancement effect was considerably increased by introducing cationic poly-vinylamine (PVAm) groups to the surface of PNIPAAm nanoparticles. The absorption enhancement depended on the ratio of NIPAAm and VAm macromonomers to styrene in the nanoparticle preparation. In contrast, the introduction of nonionic poly-vinylacetamide (PNVA) groups eliminated completely the absorption-enhancing function of PNIPAAm nanoparticles. It was suggested that this disappearance was due to the shielding of PNIPAAm groups by PNVA groups. The enhancement effect of sCT absorption by nanoparticles was greatly dominated by their chemical structure that was closely related to surface characteristics. Optimization of the chemical structure on the basis of the mechanism of the absorption enhancement resulted in the further improvement of sCT absorption.

Acrylic Resins↗
PubMed2002

Induction of mucosal IgA following intravaginal administration of inactivated HIV-1-capturing nanospheres in mice.

Concanavalin A-immobilized polystyrene nanospheres (Con A-NS) were developed for the HIV-1 vaccine capable of preventing sexual transmission. Con A-NS could capture efficiently HIV-1 irrespective of their cell tropism (R5 or X4). Furthermore, Con A-NS captured equally infectious and heat-inactivated HIV-1. Inactivated HIV-1-capturing Con A-NS (HIV-NS) were intravaginally administered to mice. Heat-inactivated HIV-1 alone and Con A-NS alone were also administered as control immunogens. Vaginal fluids were collected during and after immunization and analyzed for their anti-HIV-1 antibody levels. Although the anti-HIV-1 IgG antibody was undetectable in any groups, increased anti-HIV-1 IgA antibody response was identified in the vaginal fluids of immunized mice with HIV-NS. The vaginal fluids obtained from the HIV-NS-administered mice showed neutralizing activity against the immunizing HIV-1 strain. A marked difference in vaginal distribution was observed between HIV-NS and other immunogens, and the toxicity of Con A was reduced by conjugation with nanospheres. Thus, HIV-NS may have great potential as a prophylactic HIV-1 vaccine and should be examined further for its efficacy in non-human primates.

Animals↗
PubMed2002

Inorganic-organic polymer hybrid scaffold for tissue engineering--II: partial enzymatic degradation of hydroxyapatite-chitosan hybrid.

This article describes the preparation of porous chitosan, a hydroxyapatite hybrid, by partial enzymatic degradation. Two enzymes, chitosanase and lysozyme, were selected to hydrolyze a chitosan-reinforced matrix and create pores within the chitosan-hydroxyapatite composite. The degree of enzymatic hydrolysis of the chitosan-hydroxyapatite composite was determined by measuring the % weight loss of the chitosan matrix and the hydroxyapatite component. Hydroxyapatite loss from the chitosan matrix increased with the degree of enzymatic hydrolysis of the chitosan-reinforced matrix. After hydrolysis, the composite was further characterized by FTIR. Quantitative analysis revealed a decrease in the characteristic pyranose ring peak (1072 cm(-1)), compared with Po4(2-) (1110 cm(-1)), showing that the chitosan matrices were enzymatically hydrolyzed. The surface of the porous chitosan-hydroxyapatite composite, prepared by controlling enzymatic hydrolysis, was also observed by SEM.

Chitin↗
PubMed2000

Colloidal Platinum Nanoparticles Stabilized by Vinyl Polymers with Amide Side Chains: Dispersion Stability and Catalytic Activity in Aqueous Electrolyte Solutions.

Colloidal platinum nanoparticles were prepared by ethanol reduction of PtCl(6)(2-) in the presence of poly(N-vinylformamide) (PNVF), poly(N-vinylacetamide) (PNVA), or poly(N-vinylisobuty-ramide) (PNVIBA). The effects of molecular weight and molar ratio of monomeric unit/Pt on the particle sizes and size distributions were characterized by transmission electron microscopy and UV-visible spectroscopy. The flocculation behavior of the polymer-stabilized colloidal Pt nanoparticles was studied with respect to the effects of temperature, addition of inorganic salts, and composition of the mixed solvents. The dispersion stability of the platinum colloids stabilized by poly(N-isopropylacrylamide) (PNIPAAm) and poly(vinylpyrrolidone) (PVP) was also examined. The sequence of polymer-stabilized platinum colloids in increasing order of dispersion stability was found to be PNIPAAm-Pt<PNVIBA-Pt<PVP-Pt<PNVA-Pt<PNVF-Pt. Anions of the added salts played an essential role in reducing the dispersion stability and sulfates were more efficient at promoting flocculation than chlorides. The PNVF-Pt colloids did not show any critical flocculation point (temperature or salt concentration) under employed conditions, owing to the strongly hydrophilic nature of PNVF chains. The catalytic activity of PNVF-Pt colloids for hydrogenation of allyl alcohol in 0.8 M Na(2)SO(4) solution was the same as that in pure water. Copyright 2000 Academic Press.

Journal Article↗
PubMedDate not supplied

Novel functional biodegradable polymer: synthesis and anticoagulant activity of poly(gamma-glutamic acid)sulfonate (gamma-PGA-sulfonate).

gamma-Poly(glutamic acid) (gamma-PGA), which is produced by Bacillus subtilis, was sulfonated using 2-aminoethane-1-sulfonic acid (taurine) in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (WSC) to give sulfonated gamma-PGA (gamma-PGA-sulfonate). From (1)H NMR spectroscopy and IR spectroscopy, it was confirmed that taurine was introduced to the side chain of gamma-PGA via an amide linkage. By altering the synthetic conditions, it was possible to control the content of sulfonate in gamma-PGA-sulfonate. Anticoagulant activity was investigated in order to evaluate the biological activity of gamma-PGA-sulfonate by the Lee-White test. The clotting time was prolonged when the concentration of gamma-PGA-sulfonate on the degree of sulfonation was increased. It becomes clear that gamma-PGA-sulfonate is potentially useful for various medical applications, such as drug delivery, tissue engineering, and medical materials.

Anticoagulants↗
PubMedDate not supplied

Alternating bioactivity of polymeric layer-by-layer assemblies: anticoagulation vs procoagulation of human blood.

The layer-by-layer assembly between cationic chitosan and anionic dextran sulfate was analyzed quantitatively by a quartz crystal microbalance technique in the absence and presence of 0.2, 0.5, and 1 M NaCl in the polymer solution. The apparent film thickness increased upon increasing the NaCl concentration. The anti- versus procoagulant activity of these films against whole human blood was studied by the immersion of a substrate into blood for 30 min incubation time at 37 degrees C. The substrate was coated with films of varying NaCl concentrations and assembly step numbers. There was a critical concentration for the alternating activity; above a concentration of 0.5 M NaCl, both anti- and procoagulation could be observed on the dextran sulfate and chitosan surfaces, respectively. The underlying layer of the assembly was necessary for this alternating activity; after a five-step assembly, the activity was realized. The adsorption of a cationic dye (methylene blue) onto the films revealed that the anionic-charge density derived from dextran sulfate on the film surface was linearly increased with increased NaCl concentration. There was a critical charge density of the dextran sulfate for the anticoagulant activity. An assembly was also constructed from a combination of chitosan and heparin, but the activity was different from that of the former system; strong anticoagulant activity was observed even on the chitosan surface. We suggest that the polymer species and/or the assembly conditions are key factors for realizing the alternating bioactivities of films prepared by the layer-by-layer assembly.

Blood Coagulation↗
PubMedDate not supplied

Novel functional biodegradable polymer II: fibroblast growth factor-2 activities of poly(gamma-glutamic acid)-sulfonate.

Basic fibroblast growth factor (FGF-2) mitogenic activities of sulfonated poly(gamma-glutamic acid) (gamma-PGA-S) were investigated with chlorate-treated L929 fibroblast culture tests. When 72% of the carboxyl groups in gamma-PGA were sulfonated (gamma-PGA-S72), cell numbers reached a maximum. The activity of gamma-PGA-S72 was higher than that of gamma-PGA and synthetic heparinoids and was almost comparable to that of heparin. Cytotoxicity of gamma-PGA-S72 was not observed, regardless of the degree of sulfonation. FGF-2-protective effects of gamma-PGA-S72 against acid and thermal inactivation were also evaluated, and gamma-PGA-S72 showed higher FGF-2-protective effects in comparison to nonsulfonated gamma-PGA. The steric structures of various sulfonated gamma-PGA-Ss were analyzed by molecular modeling (molecular orbital method (MOPAC)) and indicated that gamma-PGA-Ss are helical in vacuo. Results from MOPAC and the molecular mechanics method (MM2) demonstrated that electrostatic interactions can take place between sulfonic and carboxyl groups of gamma-PGA-S and basic amino acid residues in FGF-2. gamma-PGA-S72 can interact with FGF-2 strongly.

Animals↗
PubMedDate not supplied

Adhesion behavior of peritoneal cells on the surface of self-assembled triblock copolymer hydrogels.

Adhesion behavior of cells to the surface of physical hydrogel membranes prepared by water-induced self-organization of precisely synthesized ABA-triblock copolymers comprised of poly(beta-benzyl L-aspartate) (PBLA) as A segment and poly(ethylene oxide) (PEO, molecular weight = 20 000) as the B segment were investigated. The cast film from the methylenechloride solution of these copolymers swelled in water very rapidly forming hydrogels (100-400% water content of total weight). The content of PBLA affected the strength, the hydrophobicity, and the amount of water involved in the hydrogel surface. During the early stage of cultivation with murine peritoneal cells, cell adhesion on the hydrogels of PEO and PBLA with 18 (20K18) and 25 (20K25) monomeric units was not observed, while adhesion on the hydrogels of PEO and PBLA with 32 (20K32) and 55 (20K55) monomeric units was successful, suggesting more than 12 mol % in PBLA content is necessary for adhesion of these cells. Although cell spreading on the hydrogels of 20K18, 20K25, and 20K32 was not sufficient, the hydrogel of 20K55 allowed cell adhesion and spreading to be bipolar with leading edge whose raffling is active with pseudopodium and lamellipodium as well as PBLA homopolymer, suggesting active motility of these cells. Remarkably, prolonged incubation restored adhesiveness onto the films at 20K18 in contrast to adhesion with 20K25 despite low hydrophobicity. It is conceivable that adaptation of proteins and chemical changes to the surface during the culture period may participate in these phenomena. Mechanical properties and interaction between cell and these copolymer hydrogels could be controlled by composition of block segments, and optimization for implants could also be attainable.

Adhesiveness↗
PubMedDate not supplied

Novel functional biodegradable polymer IV: pH-sensitive controlled release of fibroblast growth factor-2 from a poly(gamma-glutamic acid)-sulfonate matrix for tissue engineering.

The acidic pH-sensitive controlled release of fibroblast growth factor-2 (FGF-2) from a biodegradable hydrogel without any denaturation of the FGF-2 was successfully performed by a combination of FGF-2 activity and acidic pH-sensitivity. We prepared semi-interpenetrating polymer network like hetero-gels (S72-netgels) composed of poly(gamma-glutamic acid) (gamma-PGA) and 72% sulfonated gamma-PGA (gamma-PGA-S72). S72-netgels including 36 mol % sulfonic acid (S72-netgel-36) showed wide acidic pH-sensitive deswelling properties at pH = 2.0-6.0, corresponding to the isoelectric point of carboxylic acid, because of the concentration of protons due to the neighboring sulfonic acids from the carboxylic acids. The S72-netgel-36 (the volume of hydrogel is 7.85 x 10(-2) cm3) can incorporate 280 ng of FGF-2 after 24 h immersion in Tris-HCl buffer (pH = 7.4), including 1.0 microg of FGF-2. The S72-netgel-36 still retained about 60% of the FGF-2 even after 15 days of incubation in fresh Tris-HCl buffer at 37 degrees C because of the stable interaction of FGF-2 with gamma-PGA-S72 in S72-netgel-36. The release of FGF-2 from the S72-netgel-36 was successfully controlled by alternating immersion in pH = 7.4 and acidic pH buffers. Furthermore, the FGF-2 released from the S72-netgel-36 retained its activity without denaturation because the gamma-PGA-S72 in S72-netgel-36 has a protective activity. The acidic pH-sensitive FGF-2 release property of the S72-netgel-36 without denaturation of the FGF-2 may be useful for tissue engineering fields such as neovascular treatment for ischemia and inflammation.

Animals↗