PubMed Health⌕ Search

Biomedical subjects

Motomitsu Kitaoka

Publications and source records attributed to Motomitsu Kitaoka.

At least 19 recordsLinked to original sources

Characterization of raffinose synthase from rice (Oryza sativa L. var. Nipponbare).

The putative raffinose synthase gene from rice was cloned and expressed in Escherichia coli. The enzyme displayed an optimum activity at 45 degrees C and pH 7.0, and a sulfhydryl group was required for its activity. The enzyme was specific for galactinol and p-nitrophenyl-alpha-D-galactoside as galactosyl donors, and sucrose, lactose, 4-beta-galactobiose, N-acetyl-D-lactosamine, trehalose and lacto-N-biose were recognized as galactosyl acceptors.

Enzyme Activation↗

Structural dissection of the reaction mechanism of cellobiose phosphorylase.

Cellobiose phosphorylase, a member of the glycoside hydrolase family 94, catalyses the reversible phosphorolysis of cellobiose into alpha-D-glucose 1-phosphate and D-glucose with inversion of the anomeric configuration. The substrate specificity and reaction mechanism of cellobiose phosphorylase from Cellvibrio gilvus have been investigated in detail. We have determined the crystal structure of the glucose-sulphate and glucose-phosphate complexes of this enzyme at a maximal resolution of 2.0 A (1 A=0.1 nm). The phosphate ion is strongly held through several hydrogen bonds, and the configuration appears to be suitable for direct nucleophilic attack to an anomeric centre. Structural features around the sugar-donor and sugar-acceptor sites were consistent with the results of extensive kinetic studies. When we compared this structure with that of homologous chitobiose phosphorylase, we identified key residues for substrate discrimination between glucose and N-acetylglucosamine in both the sugar-donor and sugar-acceptor sites. We found that the active site pocket of cellobiose phosphorylase was covered by an additional loop, indicating that some conformational change is required upon substrate binding. Information on the three-dimensional structure of cellobiose phosphorylase will facilitate engineering of this enzyme, the application of which to practical oligosaccharide synthesis has already been established.

Binding Sites↗

RAISE: a simple and novel method of generating random insertion and deletion mutations.

Although proteins may be artificially improved by random insertion and deletion mutagenesis methods, these procedures are technically difficult, and the mutations introduced are no more variable than those introduced by the introduction of random point mutations. We describe here a three-step method called RAISE, which is based on gene shuffling and can introduce a wide variety of insertions, deletions and substitutions. To test the efficacy of this method, we used it to mutate TEM beta-lactamase to generate improved antibiotic resistance. Some unique insertion or deletion mutations were observed in the improved mutants, some of which caused higher activities than point mutations. Our findings indicate that the RAISE method can yield unique mutants and may be a powerful technique of protein engineering.

Amino Acid Substitution↗

Reaction on D-glucal by an inverting phosphorylase to synthesize derivatives of 2-deoxy-beta-D-arabino-hexopyranosyl-(1-->4)-D-glucose (2II-deoxycellobiose).

Four derivatives of 2(II)-deoxycellobiose were synthesized from d-glucal and acceptor sugars (d-glucose, d-xylose, d-mannose, and 2-deoxy-d-arabino-hexose) using a cellobiose phosphorylase from Cellvibrio gilvus. The enzyme was found to be an effective catalyst to synthesize the beta-(1-->4) linkage of 2-deoxy-d-arabino-hexopyranoside. The acceptor specificity for the d-glucal reaction was identical to that for the alpha-d-glucose 1-phosphate reaction, but the activity of d-glucal was approximately 500 times less than that of alpha-d-glucose 1-phosphate, using 10mM substrates.

Calcium Gluconate↗

Characterization of glycosynthase mutants derived from glycoside hydrolase family 10 xylanases.

Four xylanases belonging to glycoside hydrolase family 10-Thermotoga maritima XylB (TM), Clostridium stercorarium XynB (CS), Bacillus halodurans XynA (BH), and Cellulomonas fimi Cex (CF)-were converted to glycosynthases by substituting the nucleophilic glutamic acid residues with glycine, alanine, and serine. The glycine mutants exhibited the highest levels of glycosynthase activity with all four enzymes. All the glycine mutants formed polymeric beta-1,4-linked xylopyranose as a precipitate during reaction with alpha-xylobiosyl fluoride. Two glycine mutants (TM and CF) recognized X(2) as an effective acceptor molecule to prohibit the formation of the polymer, while the other two (CS and BH) did not. The difference in acceptor specificity is considered to reflect the difference in substrate affinity at their +2 subsites. The results agreed with the structural predictions of the subsite, where TM and CF exhibit high affinity at subsite 2, suggesting that the glycosynthase technique is useful for investigating the affinity of +subsites.

Amino Acid Sequence↗

Hydrolysis of beta-1,3/1,6-glucan by glycoside hydrolase family 16 endo-1,3(4)-beta-glucanase from the basidiomycete Phanerochaete chrysosporium.

When Phanerochaete chrysosporium was grown with laminarin (a beta-1,3/1,6-glucan) as the sole carbon source, a beta-1,3-glucanase with a molecular mass of 36 kDa was produced as a major extracellular protein. The cDNA encoding this enzyme was cloned, and the deduced amino acid sequence revealed that this enzyme belongs to glycoside hydrolase family 16; it was named Lam16A. Recombinant Lam16A, expressed in the methylotrophic yeast Pichia pastoris, randomly hydrolyzes linear beta-1,3-glucan, branched beta-1,3/1,6-glucan, and beta-1,3-1,4-glucan, suggesting that the enzyme is a typical endo-1,3(4)-beta-glucanase (EC 3.2.1.6) with broad substrate specificity for beta-1,3-glucans. When laminarin and lichenan were used as substrates, Lam16A produced 6-O-glucosyl-laminaritriose (beta-D-Glcp-(1->6)-beta-D-Glcp-(1->3)-beta-D-Glcp-(1->3)-D-Glc) and 4-O-glucosyl-laminaribiose (beta-D-Glcp-(1->4)-beta-D-Glcp-(1->3)-D-Glc), respectively, as one of the major products. These results suggested that the enzyme strictly recognizes beta-D-Glcp-(1->3)-D-Glcp at subsites -2 and -1, whereas it permits 6-O-glucosyl substitution at subsite +1 and a beta-1,4-glucosidic linkage at the catalytic site. Consequently, Lam16A generates non-branched oligosaccharide from branched beta-1,3/1,6-glucan and, thus, may contribute to the effective degradation of such molecules in combination with other extracellular beta-1,3-glucanases.

Amino Acid Sequence↗

The first glycosynthase derived from an inverting glycoside hydrolase.

Reducing end xylose-releasing exooligoxylanase (Rex, EC 3.2.1.156) is an inverting GH that hydrolyzes xylooligosaccharides (> or = X3) to release X1 at their reducing end. The wild-type enzyme exhibited the Hehre resynthesis hydrolysis mechanism, in which alpha-X2F was hydrolyzed to X2 and HF in the presence of X1 as an acceptor molecule. However, the transglycosidation product (X3) was not detectable in the reaction. To convert reducing end xylose-releasing exooligoxylanase to glycosynthase, derivatives with mutations in the catalytic base (Asp-263) were constructed by saturation random mutagenesis. Nine amino acid residue mutants (Asp-263 to Gly, Ala, Val, Thr, Leu, Asn, Cys, Pro, or Ser) were found to possess glycosynthase activity forming X3 from alpha-X2F and X1. Among them, D263C showed the highest level of X3 production, and D263N exhibited the fastest consumption of alpha-X2F. The D263C mutant showed 10-fold lower hydrolytic activity than D263N, resulting in the highest yield of X3. X2 was formed from the early stage of the reaction of the D263C mutant, indicating that a portion of the X3 formed by condensation was hydrolyzed before its release from the enzyme. To acquire glycosynthase activity from inverting enzymes, it is important to minimize the decrease in F(-)-releasing activity while maximizing the decrease in the hydrolytic activity. The present study expands the possibility of conversion of glycosynthases from inverting enzymes.

Amino Acid Substitution↗

Structural basis for the specificity of the reducing end xylose-releasing exo-oligoxylanase from Bacillus halodurans C-125.

Reducing end xylose-releasing exo-oligoxylanase from Bacillus halodurans C-125 (Rex) hydrolyzes xylooligosaccharides whose degree of polymerization is greater than or equal to 3, releasing the xylose unit at the reducing end. It is a unique exo-type glycoside hydrolase that recognizes the xylose unit at the reducing end in a very strict manner, even discriminating the beta-anomeric hydroxyl configuration from the alpha-anomer or 1-deoxyxylose. We have determined the crystal structures of Rex in unliganded and complex forms at 1.35-2.20-A resolution and revealed the structural aspects of its three subsites ranging from -2 to +1. The structure of Rex was compared with those of endo-type enzymes in glycoside hydrolase subfamily 8a (GH-8a). The catalytic machinery of Rex is basically conserved with other GH-8a enzymes. However, subsite +2 is blocked by a barrier formed by a kink in the loop before helix alpha10. His-319 in this loop forms a direct hydrogen bond with the beta-hydroxyl of xylose at subsite +1, contributing to the specific recognition of anomers at the reducing end.

Bacillus↗

Crystallization and preliminary X-ray analysis of reducing-end xylose-releasing exo-oligoxylanase from Bacillus halodurans C-125.

The reducing-end xylose-releasing exo-oligoxylanase (Rex) from Bacillus halodurans C-125, a novel family GH8 glycoside hydrolase, was crystallized by the hanging-drop vapour-diffusion method using 13.6 mg ml(-1) purified Rex, 5.6%(v/v) polyethylene glycol 4000, 70 mM sodium acetate pH 4.6 and 30%(v/v) glycerol. Suitable crystals grew after incubation for 5 d at 293 K. The crystals belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 52.69, b = 86.02, c = 87.92 A. X-ray diffraction data were collected at a resolution of 1.35 A.

Bacillus↗

Novel putative galactose operon involving lacto-N-biose phosphorylase in Bifidobacterium longum.

A lacto-N-biose phosphorylase (LNBP) was purified from the cell extract of Bifidobacterium bifidum. Its N-terminal and internal amino acid sequences were homologous with those of the hypothetical protein of Bifidobacterium longum NCC2705 encoded by the BL1641 gene. The homologous gene of the type strain B. longum JCM1217, lnpA, was expressed in Escherichia coli to confirm that it encoded LNBP. No significant identity was found with any proteins with known function, indicating that LNBP should be classified in a new family. The lnpA gene is located in a novel putative operon for galactose metabolism that does not contain a galactokinase gene. The operon seems to be involved in intestinal colonization by bifidobacteria mediated by metabolism of mucin sugars. In addition, it may also resolve the question of the nature of the bifidus factor in human milk as the lacto-N-biose structure found in milk oligosaccharides.

Acetylglucosamine↗

The role of conserved arginine residue in loop 4 of glycoside hydrolase family 10 xylanases.

An arginine residue in loop 4 connecting beta strand 4 and alpha-helix 4 is conserved in glycoside hydrolase family 10 (GH10) xylanases. The arginine residues, Arg(204) in xylanase A from Bacillus halodurans C-125 (XynA) and Arg(196) in xylanase B from Clostridium stercorarium F9 (XynB), were replaced by glutamic acid, lysine, or glutamine residues (XynA R204E, K and Q, and XynB R196E, K and Q). The pH-k(cat)/K(m) and the pH-k(cat) relationships of these mutant enzymes were measured. The pK(e2) and pK(es2) values calculated from these curves were 8.59 and 8.29 (R204E), 8.59 and 8.10 (R204K), 8.61 and 8.19 (R204Q), 7.42 and 7.19 (R196E), 7.49 and 7.18 (R196K), and 7.86 and 7.38 (R196Q) respectively. Only the pK(es2) value of arginine derivatives was less than those of the wild types (8.49 and 9.39 [XynA] and 7.62 and 7.82 [XynB]). These results suggest that the conserved arginine residue in GH10 xylanases increases the pK(a) value of the proton donor Glu during substrate binding. The arginine residue is considered to clamp the proton donor and subsite +1 to prevent structural change during substrate binding.

Amino Acid Sequence↗

Kinetics of substrate transglycosylation by glycoside hydrolase family 3 glucan (1-->3)-beta-glucosidase from the white-rot fungus Phanerochaete chrysosporium.

To elucidate the interaction between substrate inhibition and substrate transglycosylation of retaining glycoside hydrolases (GHs), a steady-state kinetic study was performed for the GH family 3 glucan (1-->3)-beta-glucosidase from the white-rot fungus Phanerochaete chrysosporium, using laminarioligosaccharides as substrates. When laminaribiose was incubated with the enzyme, a transglycosylation product was detected by thin-layer chromatography. The product was purified by size-exclusion chromatography, and was identified as a 6-O-glucosyl-laminaribiose (beta-D-Glcp-(1-->6)-beta-D-Glcp-(1-->3)-D-Glc) by 1H NMR spectroscopy and electrospray ionization mass spectrometry analysis. In steady-state kinetic studies, an apparent decrease of laminaribiose hydrolysis was observed at high concentrations of the substrate, and the plots of glucose production versus substrate concentration were thus fitted to a modified Michaelis-Menten equation including hydrolytic and transglycosylation parameters (K(m), K(m2), k(cat), k(cat2)). The rate of 6-O-glucosyl-laminaribiose production estimated by high-performance anion-exchange chromatography coincided with the theoretical rate calculated using these parameters, clearly indicating that substrate inhibition of this enzyme is fully explained by substrate transglycosylation. Moreover, when K(m), k(cat), and affinity for glucosyl-enzyme intermediates (K(m2)) were estimated for laminarioligosaccharides (DP=3-5), the K(m) value of laminaribiose was approximately 5-9 times higher than those of the other oligosaccharides (DP=3-5), whereas the K(m2) values were independent of the DP of the substrates. The kinetics of transglycosylation by the enzyme could be well interpreted in terms of the subsite affinities estimated from the hydrolytic parameters (K(m) and k(cat)), and a possible mechanism of transglycosylation is proposed.

Carbohydrate Sequence↗

Novel PCR-mediated mutagenesis employing DNA containing a natural abasic site as a template and translesional Taq DNA polymerase.

We describe a novel method of PCR-mediated mutagenesis employing DNA containing a natural abasic site and translesional Taq DNA polymerase. This method incorporated an adenine (80.8%) or guanine (7.7%) residue or led to a base deletion mutation (11.2%) opposite the abasic site. We conclude that the combination of DNA containing an abasic site and translesional Taq DNA polymerase is an easy and useful technique for PCR-mediated mutagenesis, having advantages different from those of conventional error-prone PCR.

DNA↗

One-step random mutagenesis by error-prone rolling circle amplification.

In vitro random mutagenesis is a powerful tool for altering properties of enzymes. We describe here a novel random mutagenesis method using rolling circle amplification, named error-prone RCA. This method consists of only one DNA amplification step followed by transformation of the host strain, without treatment with any restriction enzymes or DNA ligases, and results in a randomly mutated plasmid library with 3-4 mutations per kilobase. Specific primers or special equipment, such as a thermal-cycler, are not required. This method permits rapid preparation of randomly mutated plasmid libraries, enabling random mutagenesis to become a more commonly used technique.

Ceftazidime↗

A family 8 glycoside hydrolase from Bacillus halodurans C-125 (BH2105) is a reducing end xylose-releasing exo-oligoxylanase.

The gene encoding family 8 glycoside hydrolases from Bacillus halodurans C-125 (BH2105), an alkalophilic bacterium with a known genomic sequence, was expressed in Escherichia coli. The protein was expressed with the intact N-terminal sequence, suggesting that it did not possess a signal peptide and that it was an intracellular enzyme. The recombinant enzyme showed no hydrolytic activity on xylan, whereas it had been annotated as xylanase Y. It hydrolyzed xylooligosaccharide whose degree of polymerization is greater than or equal to 3 in an exo-splitting manner with anomeric inversion, releasing the xylose unit at the reducing end. Judging from its substrate specificity and reaction mechanism, we named the enzyme reducing end xylose-releasing exo-oligoxylanase (Rex). Rex was found to utilize only the beta-anomer of the substrate to form beta-xylose and alpha-xylooligosaccharide. The optimum pH of the enzymatic reaction (6.2-7.3) was found in the neutral range, a range beneficial for intracellular enzymes. The genomic sequence suggests that B. halodurans secretes two endoxylanases and possesses two alpha-arabinofuranosidases, one alpha-glucuronidase, and three beta-xylosidases intracellularly in addition to Rex. The extracellular enzymes supposedly hydrolyze xylan into arabino/glucurono-xylooligosaccharides that are then transported into the cells. Rex may play a role as a key enzyme in intracellular xylan metabolism in B. halodurans by cleaving xylooligosaccharides that were produced by the action of other intracellular enzymes from the arabino/glucurono-xylooligosaccharides.

Bacillus↗

Crystallization and preliminary X-ray analysis of cellobiose phosphorylase from Cellvibrio gilvus.

A recombinant cellobiose phosphorylase from Cellvibrio gilvus has been prepared and crystallized by the sitting-drop vapour-diffusion method using 10 mg ml(-1) purified enzyme, 1.5 M ammonium sulfate, 0.1 M MES buffer pH 7.0 and 5 mM glucose. A suitable crystal was obtained after 10 d incubation at 298 K. The crystal belongs to space group P2(1), with unit-cell parameters a = 84.77, b = 98.31, c = 104.04 A, beta = 102.73 degrees. X-ray diffraction data to 2.1 A resolution have been collected at KEK-PF BL-5A.

Cellvibrio↗

Kinetic evidence related to substrate-assisted catalysis of family 18 chitinases.

The hydrolytic reaction of family 18 chitinase has been considered to occur via substrate assisted catalysis. To kinetically investigate the enzyme reaction mechanism, we synthesized compounds designed to reduce the polarization of the carbonyl in N-acetyl group, GlcNAc-GlcN(TFA)-UMB (2) and GlcNAc-GlcN(TAc)-UMB (3). Kinetic parameters in the hydrolysis of these compounds by chitinase A from Serratia marcescens (ChiA) were compared with those from the hydrolysis of (GlcNAc)2-UMB (1). The kcat of 2 was 3.4% of 1, but the Km of 2 was 10-fold that of 1. In contrast, the kcat of 3 was only 0.3% of that of 1, and the two reactions had an identical Km. The drastic decreases in kcat were probably due to the weak nucleophilic activity of the C2-N-trifluoroacetamide and N-thioacetamide groups at reducing ends of compounds 2 and 3, respectively. These results indicate that the anchimeric assistance of the C2 N-acetamide group at GlcNAc plays a key role in the hydrolytic reactions catalyzed by family 18 chitinases.

Acetylation↗

Purification and characterization of an intracellular cycloalternan-degrading enzyme from Bacillus sp. NRRL B-21195.

A novel intracellular cycloalternan-degrading enzyme (CADE) was purified to homogeneity from the cell pellet of Bacillus sp. NRRL B-21195. The enzyme has a molecular mass of 125 kDa on SDS-PAGE. The pH optimum was 7.0, and the enzyme was stable from pH 6.0 to 9.2. The temperature optimum was 35 degrees C and the enzyme exhibited stability up to 50 degrees C. The enzyme hydrolyzed cycloalternan [CA; cyclo(-->6)-alpha-d-Glcp-(1-->3)-alpha-d-Glcp-(1-->6)-alpha-d-Glcp-(-->3)-alpha-d-Glcp-(1-->)] as the best substrate, to produce only isomaltose via an intermediate, alpha-isomaltosyl-(1-->3)-isomaltose. This enzyme also hydrolyzed isomaltosyl substrates, such as panose, alpha-isomaltosyl-(1-->4)-maltooligosaccharides, alpha-isomaltosyl-(1-->3)-glucose, and alpha-isomaltosyl-(1-->3)-isomaltose to liberate isomaltose. Neither maltooligosaccharides nor isomaltooligosaccharides were hydrolyzed by the enzyme, indicating that CADE requires alpha-isomaltosyl residues connected with (1-->4)- or (1-->3)-linkages. The K(m) value of cycloalternan (1.68 mM) was 20% of that of panose (8.23 mM). The k(cat) value on panose (14.4s(-1)) was not significantly different from that of cycloalternan (10.8 s(-1)). Judging from its specificity, the systematic name of the enzyme should be cycloalternan isomaltosylhydrolase. This intracellular enzyme is apparently involved in the metabolism of starch via cycloalternan in Bacillus sp. NRRL B-21195, its role being to hydrolyze cycloalternan inside the cells.

Bacillus↗