PubMed Health⌕ Search

Biomedical subjects

Mustafa Ersoz

Publications and source records attributed to Mustafa Ersoz.

4 recordsLinked to original sources

Removal of boron from aqueous solution by using neutralized red mud.

The adsorptive removal of boron from aqueous solution by using the neutralized red mud was studied in batch equilibration technique. The effects of pH, adsorbent dosage, initial boron concentration and contact time on the adsorption were investigated. The experiments demonstrated that boron removal was of a little fluctuation in pH range of 2-7 and it takes 20 min to attain equilibrium. The adsorption data was analyzed using the Langmuir and the Freundlich isotherm models and it was found that the Freundlich isotherm model represented the measured sorption data well.

Adsorption↗

Removal of phenol from aqueous phase by using neutralized red mud.

The objective of this study is to remove the phenol from aqueous solution by using the neutralized red mud in batch adsorption technique. The study was carried out as functions of contact time, pH, initial phenol concentration, red mud dosage and effect of salt addition. The experiments demonstrated that maximum phenol removal was obtained in a wide pH range of 1-9 and it takes 10 h to attain equilibrium. The adsorption data was analyzed using the Langmuir and the Freundlich isotherm models and it was found that the Freundlich isotherm model represented the measured sorption data well. The influence of addition of salt on phenol removal depends on the relative affinity of the anions for the red mud surface and the relative concentrations of the anions.

Adsorption↗

Adsorption characteristics of heavy metal ions onto a low cost biopolymeric sorbent from aqueous solutions.

In this study, the adsorption conditions of Cu(II), Pb(II) and Cd(II) metal ions onto sporopollenin have been studied. The different variables effecting the sorption capacity such as pH of the solution, adsorption time, initial metal ion concentration and temperature have been investigated. Adsorption isotherms correlated well with the Freundlich type adsorption isotherm and adsorption capacities were found to be 0.0195, 0.0411 and 0.0146 mmol g(-1) for Cu(II), Pb(II) and Cd(II) metal ions, respectively. Experimental data were also evaluated to find out kinetic characteristics of the adsorption process. Adsorption processes for three target heavy metal ions were found to follow pseudo-second order type adsorption kinetics. Intraparticle diffusion was found to take part in adsorption processes but it could not be accepted as the primary rate-determining step. The mean free energies of adsorption (E) were found to be between 8 and 16 kJ mol(-1) for the metal ions studied and therefore adsorption mechanism for the adsorbent was explained as an ion-exchange process. But it was observed that chelating effect is also playing an important role in the adsorption of metal ions onto sporopollenin. Thermodynamic parameters, DeltaH degrees , DeltaS degrees and DeltaG degrees were also calculated from graphical interpretation of the experimental data. Standard heats of adsorption (DeltaH degrees ) were found to be endothermic and DeltaS degrees values were calculated to be positive for the adsorption of Cu(II), Pb(II) and Cd(II) ions onto the adsorbent. Negative DeltaG degrees values indicated that adsorption process for these three metal ions onto sporopollenin is spontaneous.

Adsorption↗