PubMed Health⌕ Search

Biomedical subjects

N Cao

Publications and source records attributed to N Cao.

14 recordsLinked to original sources

Subluminous phase velocity of a focused laser beam and vacuum laser acceleration.

It has been found that for a focused laser beam propagating in free space, there exists, surrounding the laser beam axis, a subluminous wave phase velocity region. Relativistic electrons injected into this region can be trapped in the acceleration phase and remain in phase with the laser field for sufficiently long times, thereby receiving considerable energy from the field. Optics placed near the laser focus are not necessary, thus allowing high intensities and large energy gains. Important features of this process are examined via test particle simulations. The resulting energy gains are in agreement with theoretical estimates based on acceleration by the axial laser field.

Journal Article↗

Usefulness of brachial artery reactivity to isometric handgrip exercise in identifying patients at risk and with coronary artery disease.

The change in brachial artery (BA) diameter after release of an occluding cuff has been used as a measure of endothelial function, to characterize atherosclerotic risk factors, and as a surrogate marker for coronary artery disease (CAD). We compared the change in BA diameter to isometric handgrip (IHG) with the occlusion release method to determine if a physiologic stress could be used to distinguish patients at risk and with CAD. BA diameter was measured by ultrasound during and after IHG, and after occlusion release in 93 subjects. At 120 seconds after release of IHG, BA diameter increased by 9.99 +/- 8.3% (p <0.001) in 26 average-risk patients, increased 1.84 +/- 5.7% in 37 high-risk patients, and decreased 3.9 +/- 5.6% in 30 patients with CAD (p = 0.0001 for trend and p < 0.01 between groups). There was a good correlation between change in BA diameter to IHG and occlusion release (r = 0.763 and p = 0.0001). The capacity for IHG and BA occlusion to characterize subjects by group was comparable with the exception of high-risk patients versus patients with CAD (80.5% for IHG vs 71.6% for occlusion and release, p = 0.086). BA response to IHG may be useful for identifying risk factors, patients at risk and with preclinical CAD, and the assessment of treatment strategies.

Adult↗

Ethanol production from xylose with the yeast Pichia stipitis and simultaneous product recovery by gas stripping using a gas-lift loop fermentor with attached side-arm (GLSA).

The bioconversion of xylose into ethanol with the yeast Pichia stipitis CBS 5773 is inhibited when 20 g/L of ethanol are present in the fermentation broth. In order to avoid this limitation, the fermentation was carried out with simultaneous recovery of product by CO(2) stripping. The fermentation was also improved by attaching a side-arm to the main body of a classical gas-lift loop fermentor. This side-arm increases the liquid circulation, mass transfer, and gas distribution, reducing the amount of oxygen in the inlet gas necessary to perform the fermentation of xylose under microaerobic conditions (K(L)a approximately 16 h(-1)). The continuous stripping of ethanol from the fermentation broth in this new bioreactor system allowed the consumption of higher xylose concentrations than using Erlenmeyer shaker flasks, improved significantly the process productivity and provided a clean ethanol solution by using an ice-cooled condenser system. Finally, a fed-batch fermentation was carried out with a K(L)a = 15.8 h(-1). Starting with 248.2 g of xylose, 237.6 g of xylose was consumed to produce 88.1 g of ethanol which represents 72.6% of the theoretical yield (47.2 g/L of ethanol was recovered in the condenser, while 9.6 g/L remained in the fermentation broth).

Air Movements↗

Solid-state fermentation with Aspergillus niger for cellobiase production.

Aspergillus niger NRRL3 was cultivated in a moist wheat bran and ground corncob solid medium supplemented with inorganic minerals for the production of cellobiase (beta-1,4-glucosidase, EC 3.2.1.21). With this method, A. niger NRRL3 was able to produce a high concentration of cellobiase (215 IU/g of solid substrate) after 96 h of incubation. Temperature and moisture content affected final cellobiase titers. The best conditions for cellobiase production from solid substrate by A. niger NRRL3 were determined to be 70% moisture and 35 degrees C.

Aspergillus↗

Optimization of L-lactic acid production from glucose by Rhizopus oryzae ATCC 52311.

The effect of nutrients on L(+)-lactic acid production from glucose was investigated using Rhizopus oryzae ATCC 52311. From the shake-flask experiments, the optimal medium composition was defined for improved lactic-acid production. In order to enhance lactic-acid production rate and product yield, controlled aeration in a bubble column was conducted under optimal conditions. Results showed a maximum lactic-acid production rate of 2.58 g/L/h was obtained with an initial glucose concentration of 94 g/L. Final lactic-acid concentration of 83 g/L was achieved after 32 h of fermentation with a weight of 0.88 g lactic acid/g glucose consumed.

Journal Article↗

Simultaneous Production and Recovery of Fumaric Acid from Immobilized Rhizopus oryzae with a Rotary Biofilm Contactor and an Adsorption Column.

An integrated system of simultaneous fermentation-adsorption for the production and recovery of fumaric acid from glucose by Rhizopus oryzae was investigated. The system was constructed such that growing Rhizopus mycelia were self-immobilized on the plastic discs of a rotary biofilm contactor during the nitrogen-rich growth phase. During the nongrowth, production phase, the biofilm was alternately exposed to liquid medium and air upon rotation of the discs in the horizontal fermentation vessel. The product of fermentation, fumaric acid, was removed simultaneously and continuously by a coupled adsorption column, thereby moderating inhibition, enhancing the fermentation rate, and sustaining cell viability. Another beneficial effect of the removal of fumaric acid is release of hydroxyl ions from a polyvinyl pyridine adsorbent into the circulating fermentation broth. This moderates the decrease in pH that would otherwise occur. Polyvinyl pyridine and IRA-900 gave the highest loading for this type of fermentation. This fermentation system is capable of producing fumaric acid with an average yield of 85 g/liter from 100 g of glucose per liter within 20 h under repetitive fed-batch cycles. On a weight yield basis, 91% of the theoretical maximum was obtained with a productivity of 4.25 g/liter/h. This is in contrast to stirred-tank fermentation supplemented with calcium carbonate, whose average weight yield was 65% after 72 h with a productivity of 0.9 g/liter/h. The immobilized reactor was operated repetitively for 2 weeks without loss of biological activity.

Journal Article↗

[Assessment of left ventricular diastolic function with color Doppler flow-comparison with pulsed Doppler and radionuclide angiography].

To determine the relations among color Doppler echocardiographic, pulsed Doppler echocardiographic and radionuclide angiographic fractions of left ventricular filling, 37 patients were studied using the three techniques. Favorable correlations of the filling fractions were found between color Doppler (flow area/left ventricular cavity area) and radionuclide angiography both during early diastole (r = 0.94) and atrial systole (r = 0.90). The above results were better than those obtained from pulsed Doppler (E area/Total, A area/Total) and radionuclide angiography: during early diastole (r = 0.78) and atrial systole (r = 0.76). Color Doppler can be used as a new method for assessing the pattern of left ventricular filling.

Adult↗