PubMed Health⌕ Search

Biomedical subjects

N Garti

Publications and source records attributed to N Garti.

At least 19 recordsLinked to original sources

A novel dispersion method comprising a nucleating agent solubilized in a microemulsion, in polymeric matrix II. Microemulsion characterization.

This second part of our paper focuses on structural characterization of the microemulsion for increasing the crystallization rate of polypropylene (PP) through the entrapment of nucleating agent (nucleator) HPN-68, serving as a transport vehicle. Our concept is based on creating an advantage in dispersion capability of the nucleator that is dissolved in a nanoreactor vehicle, compared with its conventional loading as a crystalline powder. The advantage was achieved by solubilizing the HPN-68 in a microemulsion to decrease its size from micro- to nanoscale. The microemulsions were introduced to the target PP using a mixer. By the end of the mixing, when the water phase had evaporated, only the nucleator and the surfactant remained in the matrix. DSC results showed a 24% improvement in nucleation efficiency of PP by this novel method. It was shown that solubilization of the nucleator depends on the water activity in the microemulsion, and the presence of the nucleator opposes formation of the W/O phase. Light scattering, SD-NMR, and SAXS results showed that HPN-68 is accommodated in the water phase and at the interface, and significantly reduces the level of order in the microemulsion. In intermediate water content, a worm-like structure was proposed instead of the classical bicontinuous one. The structure was confirmed by SAXS and SD-NMR analysis. Viscosity measurements revealed structural transitions in the microemulsions.

Journal Article↗

A novel dispersion method comprising a nucleating agent solubilized in a microemulsion, in polymeric matrix I. Dispersion method and polymer characterization.

This is the first of a two-part study focusing on a novel dispersion method which enables increasing the crystallization rate of polypropylene (PP) through the incorporation of nucleating agent HPN-68 into the molten polymer using a microemulsion as a nanovehicle. The cycle time for processing the PP is significantly reduced and thus the effectiveness of its production is increased. Our concept is based on creating an advantage in dispersion capability of the nucleator that is dissolved in a nanoreactor vehicle in comparison with its conventional introduction as a crystalline powder. The microemulsions were introduced to the target PP using a mixer. By the end of the mixing, when the water phase had evaporated, only the nucleator and the surfactant remained in the matrix. The microemulsion components that solubilized the HPN-68 were mineral oil, alcohol, surfactant, and water. DSC results showed a 24% improvement in nucleation efficiency of PP by this method. WAXS results showed that HPN-68 is a gamma-nucleator. It causes polymorphism by significantly raising the gamma-phase concentration in the PP. SEM results showed a four-fold decrease in the PP spherulite size due to the improved dispersion of HPN-68 within the matrix via microemulsion compared to conventional nucleator incorporation.

Journal Article↗

The effect of structural variation of alcohols on water solubilization in nonionic microemulsions 1. From linear to branched amphiphiles--general considerations.

This article is the first part of a two-part study that exemplifies how to treat the solubilization of water in multicomponent surfactant-based systems. In particular, it aims at clarifying the role of cosurfactants in water solubilization in these systems. The judicious selection of the components in such systems to maximize water solubilization is occasionally thought to be dictated by the chain length compatibility principle, which may be expressed quantitatively by the BSO (Bansal, Shah, O'Connell) equation. Here we demonstrate some limitations of the equation. For example, in our best model system, C12(EO)8/dodecane+pentanol=1:1 (by weight)/water at 27+/-0.2 degrees C, the BSO equation predicts that no alcohol is needed for maximum water solubilization, contrary to our experimental findings. We discuss how to optimize the alcohol/oil weight ratio needed for stabilizing four-component microemulsions. In our model systems C12(EO)8 or C(18:1)(EO)10/pentanol/dodecane/water, this optimal weight ratio is 1:1. We also highlight the difference between the effect of normal alcohols on water solubilization-which passes via a maximum-and their effect on percolation processes and structured changes of proteins, which depends solely upon the alcohol hydrophobicity. For the investigation of the effect of branching on phase behavior the utilization of an extended form of the geometrical branching factor F(b) is suggested. The meaning of this factor is elucidated by comparing it with topological indices.

Journal Article↗

The effect of structural variation of alcohols on water solubilization in nonionic microemulsions 2. Branched alcohols as solubilization modifiers: results and interpretation.

In this second part of a paper dealing with the effect of branched alcohols on solubilization, an attempt has been made to provide explanations of experimental data related mostly to the system Brij 97/branched alcohol + dodecane = 1:1 (by weight)/water at 27+/-0.2 degrees C. Applying the Hou-Shah mechanism it was shown that for many C4-C6 branched alcohol isomers having one methyl branch, solubilization behavior is readily interpreted by assuming control of the critical radius, R(c). Two parameters, both included in the definition of the branching factor, F(b) (which was treated in the first part of the paper), were also used to analyze solubilization data. The first, l(i), is defined as the distance from the free end of the alcohol molecule to the methyl branch. The second, d, is virtually N(A), the chain length of the alcohol. When l(i)>3, the solubilization becomes dominated by the natural radius of curvature, R0. Also, we have suggested that for R(c)-control, solubilization will be enhanced in direct proportion to the distance d-l(i), whereas for R0-control, solubilization will increase with decreasing d-l(i). The validity of our assumptions was demonstrated in many cases. Some examples of the more complicated case of double branching (two methyl groups along the alcohol chain) were also analyzed.

Journal Article↗

Double emulsions stabilized with hybrids of natural polymers for entrapment and slow release of active matters.

The main focus and efforts for the next few years in the area of emulsion technology will be to improve stability and control the release of active matter in double emulsions (3rd World Congress on Emulsions, Lyon, France, September 2002). Almost any possible blends of low-molecular weight emulsifiers, oils, cosolvents and coemulsifiers have been already tested. Biopolymers, synthetic graft and comb co-polymers and polymerizable emulsifiers that impart steric or mechanical stabilization with improved stability and better controlled release were explored. Amphiphilic macromolecules, natural occurring or synthetic, that increase the viscosity of each of the phases, complex with the oil or the emulsifiers and form systems that will behave much like microcapsules, microspheres and/or mesophasic liquid crystals have been mentioned as possible new technologies for improved stability. This review will concentrate only on the most recent findings that can enhance stability of the double emulsions and/or will reduce droplets sizes for potential food applications. The attempts and achievements include: selection of food-grade blends of emulsifiers to enhance emulsion stability at both inner and outer interfaces and use of new polymeric amphiphiles (carriers, complexing agents, natural polymeric emulsifiers) to control and reduce the reverse micellar transport phenomena and to control the addenda transport.

Journal Article↗

Water Solubilization in Nonionic Microemulsions Stabilized by Grafted Siliconic Emulsifiers.

Microemulsions containing octanol, decanol, or dodecanol as the oil phase and oligomeric, grafted nonionic amphiphiles based on ethoxylated polymethylsiloxanes (Silwets) have been studied. It was demonstrated that significant amounts of water can be solubilized only when the hydrophobic siliconic backbone is very short (trimers). The water solubilization was evaluated using SAXS, DSC, and conductivity measurements. It was found that up to 40 wt% of water can be solubilized in dodecanol and Silwet L-7607 (MW 1000 and 75 wt% ethylene oxide (EO)). Surprisingly, no free water was detected in the aggregate core. All the solubilized water was confined in the vicinity of the interphasal region and froze at -10 degrees C and below. Up to three molecules of water can be associated with each EO headgroup. Based on SAXS measurements, the structural units of the microemulsions were interpreted to be lamellar-like, a form previously found for the related monomeric microemulsions. Copyright 2001 Academic Press.

Journal Article↗

Improved oil solubilization in oil/water food grade microemulsions in the presence of polyols and ethanol.

Microemulsions based on five-component mixtures for food applications and improved oil solubilization have been studied. The compositions included water, oil phase [such as R(+)-limonene and medium-chain triglycerides (MCT)], short-chain alcohols (such as ethanol), polyols (propylene glycol and glycerol), and several surfactants and their corresponding mixtures (nonionic, such as ethoxylated sorbitan esters, polyglycerol esters, sugar ester, and anionic, such as phosphatidylcholine). The phase behavior of these systems is discussed with respect to the influence of polyols and short-chain alcohols on the degree of solubilization of oils in the aqueous phase. The alcohol and polyols modify the interfacial spontaneous curvature and the flexibility of the surfactant film, enhancing the oil solubilization capacity of the microemulsions. The solubilization of R(+)-limonene was dramatically improved in the presence of the alcohol and polyols, whereas the improvement of solubilization for triglycerides containing MCT was less pronounced. In some systems high oil solubilization was achieved, and some of them can be easily diluted to infinity both with the aqueous phase and with the oil phase. Viscosity measurements along selected dilution lines [characterized by a single continuous microemulsion region starting from a pseudo binary solution (surfactant/oil phase) to the microemulsion (water/polyol corner)] indicate that at a certain composition the system inverts from a W/O to an O/W microemulsion.

Emulsions↗

Solubilization of Hydrophilic Compounds in Copolymer Aggregates.

The solubilization of five hydrophilic water-soluble aroma compounds in self-aggregating triblock amphiphilic copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO), with similar percentages of PEO and different molecular weights, was studied. The five hydrophilic compounds (diacetyl, 2-methylpyrazine, pyrrole, furfural, guaiacol) were carefully selected to represent hydrophilic molecules with a similar molecular weight and molecular volume, but with different abilities to interact with the micellar core of PPO moieties and with the PEO palisade side chains. It was found that the solubilized solute mole fraction increased and the aggregate-water partition coefficients of the solutes decreased with increasing free solute concentration in the aqueous phase. The partition coefficients were smaller than those obtained for hydrophobic compounds and equilibrium was reached at lower solubilization values. Guaiacol was the least hydrophilic molecule and had the highest partition coefficient. Diacetyl was the most water-soluble compound and exhibited the smallest partition coefficient. The data reveal that the higher molecular weight polymers solubilized more solute than the low-molecular-weight polymers. Moreover it is supposed that at low solute concentrations, guaiacol (containing a hydroxyl electron acceptor group) penetrates the core of the micelle and displaces water while at more elevated concentrations it seems to be solubilized in the micelle corona. Diacetyl, the most hydrophilic solute investigated (consisting of electron donor groups), prefers mainly the corona since its affinity for the polymeric core is very weak. The solubilization occurs in the palisade layer and the partition coefficient is independent of the free solute concentration. Selective site (palisade vs core) solubilization of hydrophilic compounds in polymeric micelles can be a powerful tool to protect sensitive materials from reactants present in the continuous water phase and to conduct surface-sensitive organic reactions. Furthermore, selective release properties of reactants and products can be designed. Copyright 2000 Academic Press.

Journal Article↗

Structured fluids as microreactors for flavor formation by the Maillard reaction.

Thermal reactions of cysteine/furfural and cysteine/ribose mixtures were studied in model systems to gain more insight into the influence of structured fluids such as L(2) microemulsions and cubic phases on the generation of aroma compounds. Formation of 2-furfurylthiol from cysteine/furfural was particularly efficient in L(2) microemulsions and cubic phases compared to aqueous systems. The reaction led to the formation of two new sulfur compounds, which were identified as 2-(2-furyl)thiazolidine and, tentatively, N-(2-mercaptovinyl)-2-(2-furyl)thiazolidine. Similarly, generation of 2-furfurylthiol and 2-methyl-3-furanthiol from cysteine/ribose mixtures was strongly enhanced in structured fluids. The cubic phase was shown to be even more efficient in flavor generation than the L(2) microemulsion. It was denoted "cubic catalyst" or "cubic selective microreactor". The obtained results are interpreted in terms of a surface and curvature control of the reactions defined by the structural properties of the formed surfactant associates.

Cysteine↗

Some characteristics of sugar ester nonionic microemulsions in view of possible food applications.

This study explores some characteristics of microemulsions composed of sucrose monostearate (SMS), medium-chain triglycerides (MCT), or R-(+)-limonene, alcohols, and water. The systems are homogeneous, soft, and waxy solids at room temperature but liquefy and structure into homogeneous microemulsions when heated to >40 degrees C. The amount of solubilized water is enhanced as a function of the alcohol/oil ratio and is inversely proportional to the alcohol chain length. Over 60 wt % water can be solubilized in systems consisting of propanol/MCT/SMS at a weight ratio of 3:1:4 (initial weight ratio). These microemulsions are unique and differ from nonionic ethoxylated-based microemulsions in that their viscosity is very low and is reduced with increasing amounts of solubilized water. The electrical conductivity increases only slightly as a function of the water content and does not show typical bicontinuous or percolated behavior. The water in the core of the microemulsion strongly binds to the headgroups of the surfactant. Only at >15 wt % solubilization of water was free or bulk water detected in the core of the microemulsions. Such unique behavior of the core water might have a possible application in systems requiring monitoring of enzymatic (lipase) reactions carried out in the microemulsions as microreactors.

Cyclohexenes↗

Structural Polymorphism in a Four-Component Nonionic Microemulsion

The Winsor IV microemulsion system composed of octaethylene glycol mono n-dodecylether [C12(EO)8]/1-dodecane + n-pentanol (1:1 by weight)/water has been investigated at constant temperature using small angle X-ray scattering and electrical conductivity measurements. The results obtained are interpreted in terms of structural evolution of the molecular aggregates as a function of the stepwise addition of water or (oil + alcohol). The size and shape of a variety of microstructures are described: small, spherical micelles near the water corner and hexagonal and lamellar mesophases, which are oil- and alcohol-poor. Simple multishell models of these provide some insight into how dilution with water or swelling with (oil + alcohol) influences the overall symmetry of the aggregates, pentanol and dodecane partitioning, surfactant headgroup conformation, and the contribution of pentanol to oil solubilization. The previously identified "local" lamellar structure [O. Regev et al., Langmuir 12, 668 (1996)], which is a surfactant-rich and (oil + alcohol)-rich intermediate state between the W/O and O/W regions, is characterized here as a type of ordered, but highly obstructed, bicontinuous microemulsion.

Journal Article↗

Induction of crystallization of calcium oxalate dihydrate in micellar solutions of anionic surfactants.

Calcium oxalate dihydrate (CaC2O4 center dot (2+x)H2O; COD; x < or = 0.5) does not readily crystallize from electrolytic solutions but appears as a component in crystalluria. In this paper, we review in vitro studies on the factors responsible for its nucleation and growth with special attention given to the role of surfactants. The following surfactants were tested: dodecyl ammonium chloride (cationic), octaethylene mono-hexadecylether (non-ionic), sodium dodecyl sulfate (SDS, anionic), dioctyl sulphosuccinate (AOT, anionic), and sodium cholate (NaC, anionic). The cationic and some of the anionic surfactants (SDS, AOT) induced different habit modifications of growing calcium oxalate crystals by preferential adsorption at different crystal faces. In addition, the anionic surfactants effectively induced crystallization of COD at the expense of COM, the proportion of COD in the precipitates abruptly increasing above a critical surfactant concentration, close to, but not necessarily identical with the respective CMC. A mechanism is proposed, whereby crystallization of COD in the presence of surfactants is a consequence of the inhibition of COM by preferential adsorption of surfactant hemimicelles (two-dimensional surface aggregates) at the surfaces of growing crystals.

Calcium Oxalate↗

The amino acid factor in stone formers' and normal urines.

The composition of amino-acids in kidney stone matrices and inhibitory materials from normal urines, reported in different independent studies has been reviewed. No obvious difference was found between the composition of amino acids from healthy and pathological sources. Studies carried out in this laboratory showed a specific marked effect of glutamic acid on the crystallization of calcium oxalate while aspartic acid and alanine affected the process very slightly. It is known that aspartic acid and alanine are transformed into glutamic acid by enzyme activity. A short survey performed in this laboratory showed that the relevant enzyme activity was relatively high in healthy urine and low in stone formers' urine. The AA factor (FAA) proposed is FAA = [Glutamic acid]/[( Aspartic acid] + [Alanine]) its value in fractions of non-potent inhibitory material and in kidney stone matrices is below 0.6. In potent portions of the inhibitory material separated from healthy people and young animals urine the value is 0.8 and above.

Amino Acids↗

Evaluation of the relative inhibitory potential of fractionated urinary macromolecules.

UNLABELLED: Ultrafiltration membranes of 10,000 d, 1,000 d and 500 d were used to remove urinary macromolecules from the urine of normal subjects and from the urine of stone forming patients. The filtrated urines were examined for their residual inhibitory potential for calcium-oxalate precipitation, by the discrimination method of Sarig et al. (D.I. test). The results of testing the filtrate were complementary to the information gained by analyses of retentates obtained in successive ultrafiltration. The method has an inherent advantage because the manipulation of solids retained on membranes may inadvertantly modify their inhibitory potential. At least two distinct groups of inhibitors were found in 20 normal urines. The first group has MW above 10,000 d while the second group of inhibitors has MW in the range of 500-1,000 d. The mean of the D.I. values increased dramatically from the normal range (less than 0.6) to the stone former range (greater than 1.1) (p less than 0.001) after the 500 d filtration. Some of the normal urines, even after the 500 d filtration, still had a degree of inhibitory potential. This inhibitory potential may be related to the inorganic compounds which were found in the urines. The inhibitory activity of macromolecules with MW above 10,000 d and below 500 delta was negligible in 7 stone formers (SF) urines. The relative contribution of 500-1,000 d macromolecules is the highest both in SF and normal urines. CONCLUSIONS: 1) inhibitors in human urine are of wide range in MW; 2) stone formers and normals differ in the level of inhibitor activity at all MW ranges; especially in above 10,000 d and below inhibitors.

Calcium Oxalate↗

Use of the discriminant index in dynamic treatment to reduce recurrence of calcium oxalate kidney stones.

Treatment with phosphates, thiazides and allopurinol was undertaken in 54 idiopathic calcium oxalate stone formers, 38 of whom were recurrent stone formers. The patients were followed up for 1 1/2 to 4 years (mean 2.6). During the same period at the pre-treatment stage the patients formed 80 stones, but during therapy only one stone was formed. A dynamic scheme of therapy was used. Each patient was tested before the start of drug treatment by the discriminant index (DI) method, which measures the overall inhibitory potential to calcium oxalate crystallisation. About 10 days after the start of treatment the DI was tested again. If the response was positive, therapy was continued; if not, the patient was given another drug. Adjustments were made as required. The stopping of stone formation correlated well with the DI prediction but less well with the hypocalciuric effect of the drugs.

Adult↗

Biological control to diminish dangers of urolithiasis.

High concentrations of phosphate, oxalate, and calcium ions in urine may cause formation of mineral deposits, i.e., urolithiasis. This is prevented in healthy individuals by substances present in trace quantities. However, there is no recognizable difference between normals and stone formers in urinary substance content. The enzymes glutamic oxaloacetic transaminase and glutamic pyruvic transaminase produce glutamic acid which retards calcium oxalate crystallization. The combined transaminase activity in 70 stone former urine samples was 12.2 +/- 4.1 IU and 31.9 +/- 10.7 IU for 47 normal controls. Incubation of stone former urine with glutamic oxaloacetic transaminase improved overall inhibitory potential, raised glutamic acid levels, and decreased aspartic acid concentrations. Correlation was established between the success of therapeutic treatment and the improvement of enzyme activity. The relative content of glutamic acid is low stone former urines and high in active inhibitory fractions of urinary materials. It is suggested that part of the mechanisms of prevention of stone formation is subjected to biological control.

Alanine Transaminase↗

Determination of GOT activity on nucleation and crystal growth of calcium oxalate.

Crystal Size Distribution (CSD) and the yield of Calcium Oxalate Crystals in solutions with an admixture of 5 normal and 3 stone forming urines, were determined. A positive correlation was found between the median size, the number of particles and the overall inhibitory potentials of the urines toward calcium oxalate precipitation in vitro as reflected by Discriminating Index (DI) measurements. Incubation of two samples of stone formers' (SF) urines with glutamic-oxalacetic-transaminase (GOT) caused a reduction of aspartic acid concentration, an increase in glutamic acid concentration and a parallel decrease in the DI values. After 90 min of SF urine incubation with GOT the DI in three samples was improved and both the median size and number of particles reduced, by 28% and 45% respectively. These results could indicate that GOT activity changes the inhibitory power of the SF urine by transforming aspartic acid into glutamic acid, having thus most probably a part in the inhibition of CaOx stone formation.

Aspartate Aminotransferases↗