Biomedical subjects

N H Olson

Publications and source records attributed to N H Olson.

At least 37 records · Page 2Linked to original sources

PubMed1996

Neutralizing antibody to human rhinovirus 14 penetrates the receptor-binding canyon.

The three-dimensional structure of intact human rhinovirus 14 (HRV-14) complexed with Fab fragments (Fab17-IA) from a strongly neutralizing antibody that binds bivalently to the virion has been determined to 4.0 angstrom resolution by a combination of X-ray crystallography and cryo-electron microscopy. In contradiction to the most commonly held model of antibody-mediated neutralization, Fab17-IA does not induce a conformational change in the HRV-14 capsid. Instead, the paratope of the antibody undergoes a large conformational change to accommodate the epitope. Unlike any previously described antibody-antigen structure, the conserved framework region of the antibody makes extensive contact with the viral surface. Fab17-IA penetrates deep within the canyon in which the cellular receptor for HRV-14 binds. Hence, it is unlikely that viral quaternary structure evolves merely to evade immune recognition. Instead, the shape and position of the receptor-binding region on a virus probably dictates receptor binding and subsequent uncoating events and has little or no influence on concealing the virus from the immune system.

Antibodies, Monoclonal↗

PubMed1996

Conserved features in papillomavirus and polyomavirus capsids.

Capsids of papilloma and polyoma viruses (papovavirus family) are composed of 72 pentameric capsomeres arranged on a skewed icosahedral lattice (triangulation number of seven, T = 7). Cottontail rabbit papillomavirus (CRPV) was reported previously to be a T = 7laevo (left-handed) structure, whereas human wart virus, simian virus 40, and murine polyomavirus were shown to be T = 7dextro (right-handed). The CRPV structure determined by cryoelectron microscopy and image reconstruction was similar to previously determined structures of bovine papillomavirus type 1 (BPV-1) and human papillomavirus type 1 (HPV-1). CRPV capsids were observed in closed (compact) and open (swollen) forms. Both forms have star-shaped capsomeres, as do BPV-1 and HPV-1, but the open CRPV capsids are approximately 2 nm larger in radius. The lattice hands of all papillomaviruses examined in this study were found to be T = 7dextro. In the region of maximum contact, papillomavirus capsomeres interact in a manner similar to that found in polyomaviruses. Although papilloma and polyoma viruses have differences in capsid size (approximately 60 versus approximately 50 nm), capsomere morphology (11 to 12 nm star-shaped versus 8 nm barrel-shaped), and intercapsomere interactions (slightly different contacts between capsomeres), papovavirus capsids have a conserved, 72-pentamer, T = 7dextro structure. These features are conserved despite significant differences in amino acid sequences of the major capsid proteins. The conserved features may be a consequence of stable contacts that occur within capsomeres and flexible links that form among capsomeres.

Animals↗

PubMed1995

Putative receptor binding sites on alphaviruses as visualized by cryoelectron microscopy.

The structures of Sindbis virus and Ross River virus complexed with Fab fragments from monoclonal antibodies have been determined from cryoelectron micrographs. Both antibodies chosen for this study bind to regions of the virions that have been implicated in cell-receptor recognition and recognize epitopes on the E2 glycoprotein. The two structures show that the Fab fragments bind to the outermost tip of the trimeric envelope spike protein. Hence, the same region of both the Sindbis virus and Ross River virus envelope spike is composed of E2 and is involved in recognition of the cellular receptor.

Antibodies, Monoclonal↗

PubMed1995

In vitro assembly of cowpea chlorotic mottle virus from coat protein expressed in Escherichia coli and in vitro-transcribed viral cDNA.

The small spherical plant virus, cowpea chlorotic mottle virus (CCMV), provides an ideal system to examine spherical virus assembly. We have modified the CCMV in vitro assembly system to produce virions from coat protein expressed in Escherichia coli and viral RNA transcribed in vitro from full-length cDNAs. Examination of the in vitro-assembled particles with cryoelectron microscopy and image reconstruction techniques demonstrates that the particles are indistinguishable from plant purified particles at 2.5 nm resolution. Mutational analysis of the coat protein N- and C-terminal extensions demonstrate their respective roles in virus assembly. The N-terminus is required for assembly of RNA containing particles but not for the assembly of empty virions. The C-terminus is essential for coat protein dimer formation and particle assembly.

Base Sequence↗

PubMed1995

Nucleocapsid and glycoprotein organization in an enveloped virus.

Alphaviruses are a group of icosahedral, positive-strand RNA, enveloped viruses. The membrane bilayer, which surrounds the approximately 400 A diameter nucleocapsid, is penetrated by 80 spikes arranged in a T = 4 lattice. Each spike is a trimer of heterodimers consisting of glycoproteins E1 and E2. Cryoelectron microscopy and image reconstruction of Ross River virus showed that the T = 4 quaternary structure of the nucleocapsid consists of pentamer and hexamer clusters of the capsid protein, but not dimers, as have been observed in several crystallographic studies. The E1-E2 heterodimers form one-to-one associations with the nucleocapsid monomers across the lipid bilayer. Knowledge of the atomic structure of the capsid protein and our reconstruction allows us to identify capsid-protein residues that interact with the RNA, the glycoproteins, and adjacent capsid-proteins.

Freezing↗

PubMed1994

Structure determination of an Fab fragment that neutralizes human rhinovirus 14 and analysis of the Fab-virus complex.

The crystal structure of Fab17-IA, an antigen-binding fragment from a murine immunoglobulin that neutralizes human rhinovirus 14 (HRV14), has been solved to 2.7 A resolution. Fab17-IA crystallized into three different space groups depending upon the method used to purify the intact antibody. The structure was determined by use of molecular and isomorphous replacement methods. The current model has a crystallographic R-factor of approximately 19% for 10,192 independent reflections between 8 and 2.7 A. Correlation coefficient calculations showed that the Fab17-IA structure can be fit into the Fab17-IA/HRV14 image reconstruction density to within 5 A positional accuracy and to within a few degrees of rotation. The resulting interface of the docked antibody was examined and showed extensive charge and shape complementarity with the virus surface that was supported by site-directed mutagenesis experiments. The success of this approach validates the utility of combining X-ray crystallography with cryo-electron microscopy of complex macromolecular assemblies.

Amino Acid Sequence↗

PubMed1994

Functional implications of quasi-equivalence in a T = 3 icosahedral animal virus established by cryo-electron microscopy and X-ray crystallography.

BACKGROUND: Studies of simple RNA animal viruses show that cell attachment, particle destabilization and cell entry are complex processes requiring a level of capsid sophistication that is difficult to achieve with a shell containing only a single gene product. Nodaviruses [such as Flock House virus (FHV)] are an exception. We have previously determined the structure of FHV at 3 A resolution, and now combine this information with data from cryo-electron microscopy in an attempt to clarify the process by which nodaviruses infect animal cells. RESULTS: A difference map was computed in which electron density at 22 A resolution, derived from the 3.0 A resolution X-ray model of the FHV capsid protein, was subtracted from the electron density derived from the cryo-electron microscopy reconstruction of FHV at 22 A resolution. Comparisons of this density with the X-ray model showed that quasi-equivalent regions of identical polypeptide sequences have markedly different interactions with the bulk RNA density. Previously reported biphasic kinetics of particle maturation and the requirement of subunit cleavage for particle infectivity are consistent with these results. CONCLUSIONS: On the basis of this study we propose a model for nodavirus infection that is conceptually similar to that proposed for poliovirus but differs from it in detail. The constraints of a single protein type in the capsid lead to a noteworthy use of quasi-symmetry not only to control the binding of a 'pocket factor' but also to modulate maturation cleavage and to release a pentameric helical bundle (with genomic RNA attached) that may further interact with the cell membrane.

Capsid↗

PubMed1994

Comparative studies of T = 3 and T = 4 icosahedral RNA insect viruses.

Crystallographic and molecular biological studies of T = 3 nodaviruses (180 identical subunits in the particle) and T = 4 tetraviruses (240 identical subunits in the particle) have revealed similarity in both the architecture of the particles and the strategy for maturation. The comparative studies provide a novel opportunity to examine an apparent evolution of particle size, from smaller (T = 3) to larger (T = 4), with both particles based on similar subunits. The BBV and FHV nodavirus structures are refined at 2.8 A and 3 A respectively, while the N omega V structure is at 6 A resolution. Nevertheless, the detailed comparisons of the noda and tetravirus X-ray electron density maps show that the same type of switching in subunit twofold contacts is used in the T = 3 and T = 4 capsids, although differences must exist between quasi and icosahedral threefold contacts in the T = 4 particle that have not yet been detected. The analyses of primary and tertiary structures of noda and tetraviruses show that N omega V subunits undergo a post assembly cleavage like that observed in nodaviruses and that the cleaved 76 C-terminal residues remain associated with the particle.

Crystallography, X-Ray↗

PubMed1994

Crystallographic and cryo EM analysis of virion-receptor interactions.

Cryoelectron microscopy has been used to determine the first structure of a virus when complexed with its glycoprotein cellular receptor. Human rhinovirus 16 (HRV16) complexed with the two amino-terminal, immunoglobulin-like domains of the intercellular adhesion molecule-1 (ICAM-1) shows that ICAM-1 binds into the 12 A deep "canyon" on the surface of the virus. This is consistent with the prediction that the viral receptor attachment site lies in a cavity inaccessible to the host's antibodies. The atomic structures of HRV14 and CD4, homologous to HRV16 and ICAM-1, showed excellent correspondence with observed density, thus establishing the virus-receptor interactions.

Cell Adhesion Molecules↗

PubMed1994

Three-dimensional structure of vaccinia virus-produced human papillomavirus type 1 capsids.

The capsid proteins of papillomavirus self-assemble to form empty capsids or virus-like particles that appear quite similar to naturally occurring virions by conventional electron microscopy. To characterize such virus-like particles more fully, cryoelectron microscopy and image analysis techniques were used to generate three-dimensional reconstructions of capsids produced by vaccinia virus recombinants (V capsids) that expressed human papillomavirus type 1 L1 protein only or both L1 and L2 proteins. All V capsids had 72 pentameric capsomers arranged on a T = 7 icosahedral lattice. Each particle (approximately 60 nm in diameter) consisted of an approximately 2-nm-thick shell of protein with a radius of 22 nm with capsomers that extend approximately 6 nm from the shell. At a resolution of 3.5 nm, both V capsid structures appear identical to the capsid structure of native human papillomavirus type 1 (T. S. Baker, W. W. Newcomb, N. H. Olson, L. M. Cowsert, C. Olson, and J. C. Brown, Biophys. J. 60:1445-1456, 1991), thus implying that expressed and native capsids are structurally equivalent.

Capsid↗

PubMed1993

Structure of a human rhinovirus-bivalently bound antibody complex: implications for viral neutralization and antibody flexibility.

The structure of a neutralizing immunoglobulin (monoclonal antibody mAb17-IA), bound to human rhinovirus 14 (HRV14), has been determined by cryo-electron microscopy and image reconstruction. The antibody bound bivalently across icosahedral twofold axes of the virus, and there were no detectable conformational changes in the capsid. Thus, bivalently bound IgGs do not appear to cause gross deformations in the capsid. Differences between the electron density of the constant domains of the bound Fab fragment and IgG structures suggested that conformational changes occur about elbow axes upon bivalent attachment as was previously predicted. No significant density was observed for the Fc fragment, which adds further evidence for a high degree of mobility about the hinge region.

Antibodies, Viral↗

PubMed1993

Structure of a human rhinovirus complexed with its receptor molecule.

Cryoelectron microscopy has been used to determine the structure of a virus when complexed with its glycoprotein cellular receptor. Human rhinovirus 16 complexed with the two amino-terminal, immunoglobulin-like domains of the intercellular adhesion molecule 1 shows that the intercellular adhesion molecule 1 binds into the 12-A deep "canyon" on the viral surface. This result confirms the prediction that the viral-receptor attachment site lies in a cavity inaccessible to the host's antibodies. The atomic structures of human rhinovirus 14 and CD4, homologous to human rhinovirus 16 and intercellular adhesion molecule 1, showed excellent correspondence with observed density, thus establishing the virus-receptor interactions.

Antigens, CD↗

PubMed1993

Use of radial density plots to calibrate image magnification for frozen-hydrated specimens.

Accurate magnification calibration for transmission electron microscopy is best achieved with the use of appropriate standards and an objective calibration technique. We have developed a reliable method for calibrating the magnification of images from frozen-hydrated specimens. Invariant features in radial density plots of a standard are compared with the corresponding features in a "defocused" X-ray model of the same standard. Defocused X-ray models were generated to mimic the conditions of cryo-electron microscopy. The technique is demonstrated with polyoma virus, which was used as an internal standard to calibrate micrographs of bovine papilloma virus type 1 and bacteriophage phi X174. Calibrations of the micrographs were estimated to be accurate to 0.35%-0.5%. Accurate scaling of a three-dimensional structure allows additional calibrations to be made with radial density plots computed from two- or three-dimensional data.

Bacteriophages↗

PubMed1993

Structure of human rhinovirus complexed with Fab fragments from a neutralizing antibody.

We have determined the structure of a human rhinovirus (HRV)-Fab complex by using cryoelectron microscopy and image reconstruction techniques. This is the first view of an intact human virus complexed with a monoclonal Fab (Fab17-IA) for which both atomic structures are known. The surface area on HRV type 14 (HRV14) in contact with Fab17-IA was approximately 500 A2 (5 nm2), which is much larger than the area that constitutes the NIm-IA epitope (on viral protein VP1) defined by natural escape mutants. From modeling studies and electrostatic potential calculations, charged residues outside the neutralizing immunogenic site IA (NIm-IA) were also predicted to be involved in antibody recognition. These predictions were confirmed by site-specific mutations and analysis of the Fab17-IA-HRV14 complex, along with knowledge of the crystallographic structures of HRV14 and Fab17-IA. The bound Fab17-IA reaches across a surface depression (the canyon) and meets a related Fab at the nearest icosahedral twofold axis. By adjusting the elbow angles of the bound Fab fragments from 162 degrees to 198 degrees, an intact antibody molecule can be easily modeled. This, along with aggregation and binding stoichiometry results, supports the earlier proposal that this antibody binds bivalently to the surface of HRV14 across icosahedral twofold axes. One prediction of this model, that the intact canyon-spanning immunoglobulin G molecule would block attachment of the virus to HeLa cells, was confirmed experimentally.

Antibodies, Monoclonal↗

PubMed1992

Preliminary X-ray crystallographic analysis of intercellular adhesion molecule-1.

Crystals of the two amino-terminal domains of intercellular adhesion molecule-1, the receptor for the major group of human rhinovirus serotypes, diffract to 3.0 A resolution. The crystals are trigonal in space group P3(1)21 or P3(2)21 with cell dimensions of a = b = 55.7 A, c = 166.3 A, with probably six molecules per unit cell.

Antigens, CD↗

PubMed1992

Atomic structure of single-stranded DNA bacteriophage phi X174 and its functional implications.

The mechanism of DNA ejection, viral assembly and evolution are related to the structure of bacteriophage phi X174. The F protein forms a T = 1 capsid whose major folding motif is the eight-stranded antiparallel beta barrel found in many other icosahedral viruses. Groups of 5 G proteins form 12 dominating spikes that enclose a hydrophilic channel containing some diffuse electron density. Each G protein is a tight beta barrel with its strands running radially outwards and with a topology similar to that of the F protein. The 12 'pilot' H proteins per virion may be partially located in the putative ion channel. The small, basic J protein is associated with the DNA and is situated in an interior cleft of the F protein. Tentatively, there are three regions of partially ordered DNA structure,

Amino Acid Sequence↗

PubMed1992

Cauliflower mosaic virus: a 420 subunit (T = 7), multilayer structure.

The structures of the Cabb-B and CM1841 strains of cauliflower mosaic virus (CaMV) have been solved to about 3 nm resolution from unstained, frozen-hydrated samples that were examined with low-irradiation cryo-electron microscopy and three-dimensional image reconstruction procedures. CaMV is highly susceptible to distortions. Spherical particles, with a maximum diameter of 53.8 nm, are composed of three concentric layers (I-III) of solvent-excluded density that surround a large, solvent-filled cavity (approximately 27 nm dia). The outermost layer (I) contains 72 capsomeric morphological units, with 12 pentavalent pentamers and 60 hexavalent hexamers for a total of 420 subunits (37-42 kDa each) arranged with T = 7 icosahedral symmetry. CaMV is the first example of a T = 7 virus that obeys the rules of stoichiometry proposed for isometric viruses by Caspar and Klug (1962, Cold Spring Harb. Symp. Quant. Biol. 27, 1-24), although the hexameric capsomers exhibit marked departure from the regular sixfold symmetry expected for a structure in which the capsid protein subunits are quasi-equivalently related. The double-stranded DNA genome is distributed in layers II and III along with a portion of the viral protein. The CaMV reconstructions are consistent with the model based on neutron diffraction studies (Kruse et al., 1987, Virology 159, 166-168) and, together, these structural models are discussed in relation to a replication-assembly model (Hull et al., 1987, J. Cell Sci. (Suppl.) 7, 213-229). Remarkable agreement between the reconstructions of CaMV Cabb-B and CM1841 suggests that other strains of CaMV adopt the same basic structure.

Capsid↗

PubMed1991

Structural studies of human alpha 2-macroglobulin: concordance between projected views obtained by negative-stain and cryoelectron microscopy.

Two views of native alpha 2-macroglobulin are revealed by electron microscopy of negatively stained samples; in one view the molecule resembles a padlock and in the other, a pair of lips. Interconversion of the two views upon tilting establishes that these are two different projected views of the same structure. Furthermore, the two views are related by a 45 degrees rotation about their major axis because they interconvert when the specimens are titled +/- 22.5 degrees. Negatively stained molecules on Butvar films present a nearly equal distribution of the two views, whereas in frozen-hydrated samples the molecules almost exclusively are oriented in the lip view. Measurements from both views indicate that the alpha 2-macroglobulin molecule is approximately 200 A long and approximately 140 A wide. Our results suggest that alpha 2-macroglobulin is composed of two protomeric units, each in the shape of a twisted letter S. These units are joined together at their ends to form a complex with point group symmetry 222. The 45 degrees interconversion angle between the lip and padlock views support this arrangement. Average images of unstained and stained lips are quite similar, indicating that the native structure is consistently preserved by the two electron microscopy procedures used in this investigation. This is substantiated by the interconversion between the lip and padlock views that occurs when the molecule is rotated 45 degrees [corrected] about its major twofold axis.

Cryopreservation↗