Biomedical subjects

N H Stoffers

Publications and source records attributed to N H Stoffers.

4 recordsLinked to original sources

PubMed2005

Feasibility study for the development of certified reference materials for specific migration testing. Part 2: estimation of diffusion parameters and comparison of experimental and predicted data.

This paper describes the second part of a project whose main objective was to develop the know-how to produce certified reference materials (CRMs) for specific migration testing. Certification parameters discussed are the diffusion coefficient, D(P), the respective polymer-specific coefficient, A(P), of the migrant polymer combinations and the partitioning coefficient, K(P,F), describing the partitioning of the migrant between the polymer and a food simulant. The parameters were determined for 16 preliminary candidate CRMs. Each parameter was determined by one laboratory. The six materials most suitable as reference materials were selected and the parameters then determined by four laboratories. The coefficients resulting from this small-scale interlaboratory comparison study can be regarded as the most reliable values available to date. These coefficients were applied for a comparison of experimental and predicted migration data. The experimental migration data arose from the same project and were determined by one laboratory for the first 16 materials and subsequently by four laboratories for the six materials selected in the second phase. Overall, experimental and predicted migration data fit together quite well. Roughly half of the predicted data were within +/-10%; almost all predicted data were within +/-40% compared with the experimental data.

Benzophenones↗

PubMed2004

Feasibility study for the development of certified reference materials for specific migration testing. Part 1: initial migrant concentration and specific migration.

The paper describes a project with the main objective of developing the know how to produce certified reference materials (CRMs) for specific migration testing. Certification parameters discussed are the initial concentration of the migrant in the polymer (C(P),0) and the specific migration into a food simulant under certain temperature/time conditions. Sixteen preliminary candidate CRMs were defined and produced. The most important polymers (low- and high-density polyethylene (LDPE and HDPE), polypropylene (PP), polystyrene (PS), polyethylene terephtalate (PET), plasticized polyvinyl chloride (PVC), rigid PVC, polyamides (PA)) and additives as well as monomers representing different physicochemical properties as target substances for migration were chosen. The stability and homogeneity of the migrants in the materials were tested and methods for the determination of the certification parameters were developed and validated. > From the 16 materials produced, the six most suitable CRM candidates (LDPE//Irganox 1076/Irgafos 168, LDPE//1,4-diphenyl-1,3-butadiene (DPBD), HDPE//Chimassorb 81/Uvitex OB, PP homo//Irganox 1076/Irgafos 168, HIPS, 1% mineral oil//styrene, PA 6//caprolactam) were selected. The feasibility of CRM production for the six candidate materials was demonstrated and a trial certification exercise was performed with participation of all four partner laboratories. All six materials showed suitable properties for future production as certified reference materials.

Consumer Product Safety↗

PubMed2003

Development and validation of analytical methods for monomeric and oligomeric migrants from nylon 12 packaging materials.

Analytical methods for the determination of laurolactam--the monomer of nylon 12--as well as the cyclic dimer and trimer were established. High performance liquid chromatography using ultraviolet (HPLC-UV) and mass spectrometric detection (HPLC-MS) were both found suitable to identify and quantify monomer, cyclic dimer and trimer well below the specific migration limit (SML) of laurolactam, being 5 mg/kg of food (simulant). Gas chromatography with flame ionisation detection (GC-FID) showed to be an appropriate method for the detection of only laurolactam in aqueous and fatty food simulants. Food simulants could be analysed directly by all three methods, or after a change of solvents. For olive oil, a method for sample clean-up by size-exclusion chromatography (SEC) was established.

Chromatography, Gas↗

PubMed2003

Alternative fatty food simulants and diffusion kinetics of nylon 12 food packaging.

The migration of laurolactam and cyclic di- and trimer of nylon 12 was assessed using three different films and five food simulants (olive oil, isooctane, 95% ethanol, 50% ethanol, water). Substitute test conditions for migration into olive oil according to European Union Directive EC/97/48 were applied using 95% ethanol and isooctane. Results showed that 95% ethanol overestimated while isooctane underestimated the respective migration into olive oil. Water was the best olive oil substitute, as migration of laurolactam into water and olive oil using the same temperature gave similar results. Additionally, diffusion kinetics of laurolactam were investigated by migration kinetic studies using isooctane and olive oil. Diffusion coefficients determined with isooctane were significantly higher than those found using olive oil. It was proved that isooctane had an interaction and olive oil was inert to the polymer. The diffusion conductance parameter, A(p), for nylon 12 determined using olive oil ranged from 0.3 to 0.6.

Dietary Fats↗