Biomedical subjects

Nanming Zhao

Publications and source records attributed to Nanming Zhao.

At least 19 recordsLinked to original sources

PubMed2006

Corrosion test, cell behavior test, and in vivo study of gradient TiO2 layers produced by compound electrochemical oxidation.

This paper describes efforts to improve implant biocompatibility and durability by applying a hybrid technique using composite oxidation. Pure titanium was used as the substrate material. A porous oxide film as the outer layer was produced by micro-arc oxidation and a dense oxide film as the inner layer was produced by pre-anodic oxidation. In this study, physicochemical characteristics, corrosion test, cell attachment behavior, and in vivo studies were used to compare this gradient layer with untreated titanium. The results revealed that the gradient layer was composed of two layers of oxide films which were made up of rutile and anatase and the surface was porous with calcium and phosphor. The corrosion resistance of the gradient layer was improved remarkably, which was about three times the values for titanium and two times the value for the dense layer. The cell-material interaction study indicated that L929 cells seeded and cultured on the gradient layer appeared to attach well and the rate of proliferation was the greatest. The study in vivo showed that the gradient layer had good biocompatibility. This gradient layer provides a material with high corrosion resistance, bioactivity, and biological properties suitable for tissue engineering applications.

Animals↗

PubMed2006

A sandwich tubular scaffold derived from chitosan for blood vessel tissue engineering.

Many materials have been investigated in blood vessel tissue engineering, such as PGA, PLGA, P4HB. However, chitosan is not mentioned in the arena. This study aimed to develop a chitosan-based tubular scaffold and examine its feasibility of being applied in this field. Briefly, a knitted chitosan tube was dipped into chitosan solution (2%, w/v) and dried, then its inner and outer surface was mantled with a layer of chitosan/gelatin (4:1, w/w) complex solution, and then freeze-dehydrated. In vitro characterization showed that the scaffold had a wall of 1.0 mm in thickness with a sandwich structure, and a porosity of 81.2%. The pore diameter was 50-150 microm and could be regulated by varying freezing conditions. The scaffold possessed proper swelling property, burst strength of almost 4000 mmHg, and high suture-retention strength. After degradation for 2 months, the scaffold could maintain enough mechanical strength with an average mass loss of 18.7%. Vascular smooth muscle cells could spread and grow very well on the scaffold. This study provided a novel method to fabricate chitosan and its complex into a tubular scaffold and demonstrated the feasibility of the scaffold employed in the field of blood vessel tissue engineering.

Animals↗

PubMed2006

Investigation of MC3T3-E1 cell behavior on the surface of GRGDS-coupled chitosan.

The GRGDS (Gly-Arg-Gly-Asp-Ser) peptide has intermediate affinity to alphaVbeta3 and alphaIIbbeta3, which are the integrins most reported to be involved in bone function. In this study, biomimetic chitosan films modified with GRGDS peptide were prepared and were used as a substrate for the in vitro culture of MC3T3-E1 cells in order to investigate the effect of GRGDS modification on MC3T3-E1 cell behavior. The results of electron spectroscopy for chemical analysis (ESCA), attenuated total reflection-Fourier transform infrared spectra (ATR-FTIR), and amino acid analysis (AAA) demonstrated that the chitosan films were successfully modified with GRGDS peptides and that the surface density of the immobilized GRGDS was on the order of 10(-9) mol/cm2. The immobilization of the GRGDS sequence on chitosan as well as the peptide concentration play a significant role in MC3T3-E1 cell behavior. MC3T3-E1 cell attachment, proliferation, migration, differentiation, and mineralization were remarkably greater on GRGDS-coupled chitosan than on unmodified chitosan. Besides, the degree of acceleration of these biological processes was found to be dependent on peptide density. Competitive inhibition of MC3T3-E1 cell attachment using soluble GRGDS peptides indicated that the interaction of MC3T3-E1 cells with the surface of the materials was ligand-specific. Cytoskeleton organization in the fully spread MC3T3-E1 cells was highly obvious on GRGDS-coupled chitosan when compared to the lack of actin fibers noted in the round MC3T3-E1 cells on unmodified chitosan. These results suggest that MC3T3-E1 cell function can be modulated, in a peptide density-dependent manner, by the immobilization of GRGDS peptide on chitosan used for scaffold-based bone tissue engineering.

3T3 Cells↗

PubMed2005

Effects of surface modification of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) on physicochemical properties and on interactions with MC3T3-E1 cells.

As a new member of the polyhydroxyalkanoate (PHA) family, poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) has better mechanical and processible properties than poly (3-hydroxybutyrate) (PHB). Still, it is difficult to introduce functional groups to the polyester carbon chain of PHBHHx, which restricts the modification of PHBHHx for a wide range. In this study, a procedure for the modification of the surface of PHBHHx films under strongly alkaline conditions was described. Through this kind of modification, carboxyl and hydroxyl groups were introduced to the surface and the total surface free energy was increased, which was mainly due to the increased polar components. Meanwhile, this process makes the surface rougher, resulting in larger total surface areas. After mineralization in simulated body fluids (SBFs), the apatite nucleation and growth on the surface-hydrolyzed PHBHHx films were significantly faster than on the unmodified PHBHHx films. This phenomenon should have a close relationship with the increased carboxyl and hydroxyl groups. The physicochemical properties also influenced the cell response to PHBHHx films. Compared to unmodified PHBHHx, fibronectin adsorption, and MC3T3-E1 cell attachment and proliferation were significantly greater on surface-hydrolyzed PHBHHx, which may be due to the increased surface free energy and rougher surface. Therefore, surface hydrolysis makes PHBHHx more suitable for osteoblast cell response and for application in bone-tissue engineering.

3-Hydroxybutyric Acid↗

PubMed2005

Preparation and characterization of nano-hydroxyapatite/chitosan composite scaffolds.

A novel nano-hydroxyapatite (HA)/chitosan composite scaffold with high porosity was developed. The nano-HA particles were made in situ through a chemical method and dispersed well on the porous scaffold. They bound to the chitosan scaffolds very well. This method prevents the migration of nano-HA particles into surrounding tissues to a certain extent. The morphologies, components, and biocompatibility of the composite scaffolds were investigated. Scanning electron microscopy, porosity measurement, thermogravimetric analysis, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transformed infrared spectroscopy were used to analyze the physical and chemical properties of the composite scaffolds. The biocompatibility was assessed by examining the proliferation and morphology of MC 3T3-E1 cells seeded on the scaffolds. The composite scaffolds showed better biocompatibility than pure chitosan scaffolds. The results suggest that the newly developed nano-HA/chitosan composite scaffolds may serve as a good three-dimensional substrate for cell attachment and migration in bone tissue engineering.

Animals↗

PubMed2005

Physical, mechanical and degradation properties, and schwann cell affinity of cross-linked chitosan films.

Three kinds of cross-linked chitosan films were prepared with hexamethylene diisocyanate (HDI), epichlorohydrin (ECH) and glutaraldehyde (GA) as cross-linking agents, respectively. The physical and mechanical properties, biodegradability and Schwann cell affinity of the cross-linked films were investigated. A significant decrease in the degradation rate in lysozyme solution and a large change in the mechanical properties were observed compared with non-cross-linked chitosan films. The protein adsorption on chitosan films was determined by means of enzyme-linked immunosorbent assay (ELISA). In comparison with the non-cross-linked films, the chitosan films cross-linked with HDI showed a significant increase (up to 40-50%) in both fibronectin and laminin adsorption, while the protein adsorption on the other two kinds of cross-linked films was similar to that on non-crosslinked films. In addition, cell culture revealed that the HDI cross-linked chitosan films enhanced the spread and proliferation of Schwann cells while the other cross-linked films delayed the cell proliferation. These results suggest that HDI cross-linking of chitosan films provides a combination of physical properties, biodegradability and Schwann cell affinity suitable for peripheral nerve regeneration.

Adsorption↗

PubMed2005

Novel biodegradable films and scaffolds of chitosan blended with poly(3-hydroxybutyrate).

In order to develop a novel biomaterial, films of chitosan blended with poly(3-hydroxybutyrate) (PHB) were prepared by an emulsion blending technique and their properties were characterized. Scanning electron microscopy (SEM) showed that PHB microspheres were formed and were entrapped in chitosan matrices, which made the film surface rough. With increasing PHB content, the roughness of the film surface increased, while the swelling capability of the films decreased. In a wet state, the blended films exhibited a lower elastic modulus, a higher elongation-at-break and a higher tensile strength compared with chitosan films. Cell-culture experiments revealed that the blended films had better cytocompatibility than chitosan films. To explore the potential application of the blended material in tissue engineering, the porous blended scaffolds were fabricated and their pore morphology was observed by SEM. The results revealed that not only pore structure but also pore wall morphology of the blended scaffolds could be controlled by selecting the parameters of the fabrication process. These advantageous properties indicate that the blended chitosan/PHB material is promising for tissue engineering applications.

Absorbable Implants↗

PubMed2005

Properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) films modified with polyvinylpyrrolidone and behavior of MC3T3-E1 osteoblasts cultured on the blended films.

A series of composite films of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) modified with polyvinylpyrrolidone (PVP) was prepared by varying the ratio of constituents, and their properties and cytocompatibility were evaluated. The hydrophilicity of the blended materials surfaces increased and the amounts of fibronectin and laminin adsorbed on the materials surface increased remarkably compared with PHBHHx. FT-IR spectra of the blended films showed a new band, implying that a surface physical interpenetrating network structure had formed. Scanning electron microscopy showed that there were dense pits and holes on the blended films surface. For the films of PHBHHx with 20 wt% and 40 wt% PVP, MTT assay indicated that PVP enhanced cell adhesion and proliferation, but that the effects were impaired by excessive PVP. The results suggested that proper addition of PVP increased the cytocompatibility of PHBHHx because the material surface had increased hydrophilicity and presented an appropriate morphology.

3-Hydroxybutyric Acid↗

PubMed2005

Global changes of chlorophyll excitonic interactions in photosystem II during thermal denaturation.

Photosystem II (PSII) is a multisubunit chlorophyll-binding enzyme that absorbs light to catalyze water oxidation and plastoquinone reduction. Chlorophyll excitonic interaction changes in PSII were studied by absorption and circular dichroism spectra from 25 degrees C to 80 degrees C, and protein subunit denaturation was monitored by differential scanning calorimetry. A four-stage process of chlorophyll excitonic interaction change was observed being correlated with the denaturation of protein subunits.

Chlorophyll↗

PubMed2004

BOD: a customizable bioinformatics on demand system accommodating multiple steps and parallel tasks.

The integration of bioinformatics resources worldwide is one of the major concerns of the biological community. We herein established the BOD (Bioinformatics on demand) system to use Grid computing technology to set up a virtual workbench via a web-based platform, to assist researchers performing customized comprehensive bioinformatics work. Users will be able to submit entire search queries and computation requests, e.g. from DNA assembly to gene prediction and finally protein folding, from their own office using the BOD end-user web interface. The BOD web portal parses the user's job requests into steps, each of which may contain multiple tasks in parallel. The BOD task scheduler takes an entire task, or splits it into multiple subtasks, and dispatches the task or subtasks proportionally to computation node(s) associated with the BOD portal server. A node may further split and distribute an assigned task to its sub-nodes using a similar strategy. In the end, the BOD portal server receives and collates all results and returns them to the user. BOD uses a pipeline model to describe the user's submitted data and stores the job requests/status/results in a relational database. In addition, an XML criterion is established to capture task computation program details.

Computational Biology↗

PubMed2004

Effects of acid and alkali on the light absorption, energy transfer and protein secondary structures of core antenna subunits CP43 and CP47 of photosystem II.

The effects of acid and alkali treatment on the light absorption, energy transfer and protein secondary structure of the photosystem II core antenna CP43 and CP47 of spinach were investigated by the absorption spectra, fluorescence emission spectra and circular dichroism spectra. It has been found that acid treatment caused the appearance of absorption characteristic of pheophytin a (Pheo a), whereas alkali treatment induced a new absorption peak at 642 nm. The energy transfer between beta-carotene and chlorophyll a (Chl a) in CP43 was easily disturbed by alkali, whereas in CP47 was readily affected by acid. As to the effects on the secondary structure of proteins in CP43 and CP47, effects of acid were far less than those of alkali. Both acid and alkali disturbed the microenvironment of Chl a and interfered exciton interaction between Chl a molecules. It was suggested that acid and alkali affect the light absorption, energy transfer and protein secondary structure of CP43 and CP47 in a different way. H+ can permeate into the internal space of alpha-helix, change Chl a into Pheo a and disturb the microenvironment of pigments without damaging the secondary structure of protein, whereas OH- can induce the protein unfolding at first, then saponify Chl a to chlorophyllide and disturb the microenvironment of pigments.

Acids↗

PubMed2003

Crystal structure of tabtoxin resistance protein complexed with acetyl coenzyme A reveals the mechanism for beta-lactam acetylation.

Tabtoxin resistance protein (TTR) is an enzyme that renders tabtoxin-producing pathogens, such as Pseudomonas syringae, tolerant to their own phytotoxins. Here, we report the crystal structure of TTR complexed with its natural cofactor, acetyl coenzyme A (AcCoA), to 1.55A resolution. The binary complex forms a characteristic "V" shape for substrate binding and contains the four motifs conserved in the GCN5-related N-acetyltransferase (GNAT) superfamily, which also includes the histone acetyltransferases (HATs). A single-step mechanism is proposed to explain the function of three conserved residues, Glu92, Asp130 and Tyr141, in catalyzing the acetyl group transfer to its substrate. We also report that TTR possesses HAT activity and suggest an evolutionary relationship between TTR and other GNAT members.

Acetyl Coenzyme A↗

PubMed2003

Sucrose accumulation in salt-stressed cells of agp gene deletion-mutant in cyanobacterium Synechocystis sp PCC 6803.

The agp gene encoding the ADP-glucose pyrophosphorylase is involved in cyanobacterial glycogen synthesis and glucosylglycerol formation. By in vitro DNA recombination technology, a mutant with partial deletion of agp gene in the cyanobacterium Synechocystis sp. PCC 6803 was constructed. This mutant could not synthesize glycogen or the osmoprotective substance glucosylglycerol. In the mutant cells grown in the medium containing 0.9 M NaCl for 96 h, no glucosylglycerol was detected and the total amount of sucrose was 29 times of that of in wild-type cells. Furthermore, the agp deletion mutant could tolerate up to 0.9 M salt concentration. Our results suggest that sucrose might act as a similar potent osmoprotectant as glucosylglycerol in cyanobacterium Synechocystis sp. PCC 6803.

Acclimatization↗

PubMed2003

Study on physical properties and nerve cell affinity of composite films from chitosan and gelatin solutions.

A series of chitosan-gelatin composite films was prepared by varying the ratio of constituents. FT-IR and X-ray analysis showed good compatibility between these two biopolymers. Differential scanning calorimetry (DSC) analysis indicated that the water take-up of chitosan film increased when blended with gelatin. Composite film exhibited a lower Young's modulus and a higher percentage of elongation-at-break compared with chitosan film, especially in wet state. All composite films were hydrophilic materials with water contact angles ranging from 55 degrees to 65 degrees. The results obtained from ELISA indicated the adsorption amount of fibronectin on composite films was much higher than on chitosan film. PC12 cells culture was used to evaluate the nerve cell affinity of materials. The cells cultured on the composite film with 60wt% gelatin differentiated more rapidly and extended longer neurites than on chitosan film. The results suggest that the soft and elastic complex of chitosan and gelatin, which has better nerve cell affinity compared to chitosan, is a promising candidate biomaterial for nerve regeneration.

Adsorption↗

PubMed2003

Changes in photosynthesis and pigmentation in an agp deletion mutant of the cyanobacterium Synechocystis sp.

The agp gene encoding ADP-glucose pyrophosphorylase is involved in cyanobacterial glycogen synthesis. By in vitro DNA recombination technology, agp deletion mutant (agp-) of cyanobacterium Synechocystis sp. PCC 6803 was constructed. This mutation led to a complete absence of glycogen biosynthesis. As compared with WT (wild type), a 60% decrease in ratio of the c-phycocyanine/chlorophyll a and no significant change in the carotenoid/chlorophyll a were observed in agp- cells. The agp- mutant had 38% less photosynthetic capacity when grown in light over 600 micromol m(-2) s(-1). Under lower light intensity, the final biomass of the mutant strain was only 1.1 times of that of the WT strain under mixotrophic condition after 6 d culture. Under higher light intensity, however, the final biomass of the WT strain under mixotrophic conditions was 3 times that of the mutant strain after 6 d culture and 1.5 times under photoautotrophic conditions. The results indicate that there is a minimum requirement for glycogen synthesis for normal growth and development in cyanobacteria.

Carotenoids↗

PubMed2003

An improved equation and assay for determining the CO(2)/O(2) specificity for Rubisco.

The determination of the CO(2)/O(2) specificity factor (Omega) is very important to investigate the Rubisco carbon assimilation efficiency. In this paper, it is proved that previous formulae can introduce notable errors into calculating the CO(2)/O(2) specificity factor (Omega) because CO(2) and O(2) are both the substrates and the mutually competitive inhibitors for Rubisco. A simple integrated equation is proposed to calculate the CO(2)/O(2) specificity factor (Omega). On the other hand, previous multi-step procedures, including the manipulation of radioisotope ((14)C and/or (3)H) and the chromatographic separation of the products, are inconvenient and may cause much random error. An improved assay procedure is presented therefore, which includes the spectrophotometric measurement of 3-phosphoglycerate-dependent NADH oxidation with a coupled enzyme system.

Journal Article↗

PubMed2003

Studies on nerve cell affinity of biodegradable modified chitosan films.

Chitosan, a natural polysaccharide that has excellent biocompatibility and biodegradability, can be used as nerve conduit material. The purpose of this work was to study the ability of chitosan and some chitosan-derived materials to facilitate nerve cell attachment, differentiation and growth. The biomaterials studied were chitosan, poly-L-lysine-blended chitosan (CP), collagen-blended chitosan (CC) and albumin-blended chitosan (CA), with collagen control material. Culture of PC12 cells and fetal mouse cerebral cortex (FMCC) cells on these biomaterials was used to evaluate their nerve cell affinity. The composite materials, including CP, CC and CA, had significantly improved nerve cell affinity compared to chitosan, as established by increasing attachment, differentiation and growth of PC12 cells. FMCC cells could also grow better on composite materials than on chitosan. CP exhibited the best nerve cell affinity among these three types of composite material. CP is an even better material in promoting neurite outgrowth than collagen, a substrate that is widely used in tissue engineering, suggesting that CP is a promising candidate material for nerve regeneration.

Absorbable Implants↗

PubMed2003

Site-directed mutagenesis and preliminary x-ray crystallographic studies of the tabtoxin resistance protein.

Tabtoxin resistance protein (TTR) is an enzyme that catalyzes the acetylation of tabtoxin rendering tabtoxin-producing pathogens tolerant to their own phytotoxins. According to the structure based detoxification mechanism of TTR, three site-directed mutants Y141F, D130N and Y141F-D130N were constructed and overexpressed in E. coli. The products were then purified and their properties were analyzed by CD and DLS. Crystallization trials of two mutants Y141F andY141F-D130N were preformed.

Acetylation↗