Biomedical subjects

Naomi Eidelman

Publications and source records attributed to Naomi Eidelman.

7 recordsLinked to original sources

PubMed2006

Evaluation of bioreactor-cultivated bone by magnetic resonance microscopy and FTIR microspectroscopy.

We present a three-dimensional mineralizing model based on a hollow fiber bioreactor (HFBR) inoculated with primary osteoblasts isolated from embryonic chick calvaria. Using non-invasive magnetic resonance microscopy (MRM), the growth and development of the mineralized tissue around the individual fibers were monitored over a period of 9 weeks. Spatial maps of the water proton MRM properties of the intact tissue, with 78 microm resolution, were used to determine changes in tissue composition with development. Unique changes in the mineral and collagen content of the tissue were detected with high specificity by proton density (PD) and magnetization transfer ratio (MTR) maps, respectively. At the end of the growth period, the presence of a bone-like tissue was verified by histology and the formation of poorly crystalline apatite was verified by selected area electron diffraction and electron probe X-ray microanalysis. FTIR microspectroscopy confirmed the heterogeneous nature of the bone-like tissue formed. FTIR-derived phosphate maps confirmed that those locations with the lowest PD values contained the most mineral, and FTIR-derived collagen maps confirmed that bright pixels on MTR maps corresponded to regions of high collagen content. In conclusion, the spatial mapping of tissue constituents by FTIR microspectroscopy corroborated the findings of non-invasive MRM measurements and supported the role of MRM in monitoring the bone formation process in vitro.

Animals↗

PubMed2005

Combinatorial approach to study enzyme/surface interactions.

A fast combinatorial approach to access information about the immobilization behavior and kinetics of enzymes on a variation of surfaces is presented. As a test system, Candida Antarctica Lipase B was immobilized on a self-assembled monolayer bearing a gradient of surface energy. The respective immobilization behavior was monitored by Fourier transform infrared micro-spectroscopy. In addition, the activity of the immobilized enzyme was monitored over the entire film in real time with a specially developed fluorescence activity assay embedded into a siloxane gel. It was found that the highest amount of active protein was immobilized on the hydrophilic end of the gradient surface. This effect is associated with a higher surface roughness of this area resulting in hydrophobic micro-environments in which the enzyme gets immobilized.

Combinatorial Chemistry Techniques↗

PubMed2005

Combinatorial screening of cell proliferation on poly(L-lactic acid)/poly(D,L-lactic acid) blends.

We have combined automated fluorescence microscopy with a combinatorial approach for creating polymer blend gradients to yield a rapid screening method for characterizing cell proliferation on polymer blends. A gradient in polymer blend composition of poly(L-lactic acid) (PLLA) and poly(D,L-lactic acid) (PDLLA) was created in the form of a strip-shaped film and was annealed to allow PLLA to crystallize. Fourier transform infrared (FTIR) microspectroscopy was used to determine the composition in the gradients and atomic force microscopy was used to characterize surface topography. Osteoblasts were cultured on the gradients and proliferation was assessed by automated counting of cells using fluorescence microscopy. Surface roughness varied with composition, was smooth on PDLLA-rich regions and was rough on the PLLA-rich regions. Cell adhesion was similar on all regions of the gradients while proliferation was faster on the smooth, PDLLA-rich end of the gradients than on the rough, PLLA-rich end of the gradients. These results demonstrate the feasibility of a new, combinatorial approach for evaluating cell proliferation on polymer blends.

3T3 Cells↗

PubMed2005

Triglycidylamine crosslinking of porcine aortic valve cusps or bovine pericardium results in improved biocompatibility, biomechanics, and calcification resistance: chemical and biological mechanisms.

We investigated a novel polyepoxide crosslinker that was hypothesized to confer both material stabilization and calcification resistance when used to prepare bioprosthetic heart valves. Triglycidylamine (TGA) was synthesized via reacting epichlorhydrin and NH(3). TGA was used to crosslink porcine aortic cusps, bovine pericardium, and type I collagen. Control materials were crosslinked with glutaraldehyde (Glut). TGA-pretreated materials had shrink temperatures comparable to Glut fixation. However, TGA crosslinking conferred significantly greater collagenase resistance than Glut pretreatment, and significantly improved biomechanical compliance. Sheep aortic valve interstitial cells grown on TGA-pretreated collagen did not calcify, whereas sheep aortic valve interstitial cells grown on control substrates calcified extensively. Rat subdermal implants (porcine aortic cusps/bovine pericardium) pretreated with TGA demonstrated significantly less calcification than Glut pretreated implants. Investigations of extracellular matrix proteins associated with calcification, matrix metalloproteinases (MMPs) 2 and 9, tenascin-C, and osteopontin, revealed that MMP-9 and tenascin-C demonstrated reduced expression both in vitro and in vivo with TGA crosslinking compared to controls, whereas osteopontin and MMP-2 expression were not affected. TGA pretreatment of heterograft biomaterials results in improved stability compared to Glut, confers biomechanical properties superior to Glut crosslinking, and demonstrates significant calcification resistance.

Animals↗

PubMed2005

Controlling the fluoride dosage in a patient with compromised salivary function.

BACKGROUND: High-concentration topical fluorides are used commonly to with compromised salivary function due to irradiation and chemotherapy. CASE DESCRIPTION: The authors describe a 50-year-old man with previously treated cancer who was using tray-applied topical fluoride gel. He complained of gastric symptoms, difficulty in swallowing, leg muscle soreness and knee joint soreness. A computed tomographic scan revealed thickening of the esophageal walls. An upper endoscopy revealed abnormal motility. The motility test indicated high-amplitude peristalsis and hypertensive lower esophageal sphincter, and urine testing indicated high levels of systemic fluoride. The patient's fluoride regimen was altered, and within a short period his urinary fluoride levels returned to normal and his symptoms resolved. CLINICAL IMPLICATIONS: Clinicians prescribing home-applied high-concentration fluorides need to be cognizant of the symptoms of fluoride toxicity, carefully monitor the patient's compliance with the treatment regimen, and adjust the dosage or mode of application to control the total ingested dose of fluoride.

Arthralgia↗

PubMed1998

Synthesis, Characterization, and Crystal Structure of Dicalcium Glutarylbis(phosphonate) Dihydrate: A Covalently Pillared Layer Structure with the Potential for Epitaxial Growth on Hydroxyapatite.

A new bis(acylphosphonate), glutarylbis(phosphonate) (GlBP), was synthesized. Sodium and calcium salts of the GlBP, disodium dihydrogen glutarylbis(phosphonate), NaHO(3)PC(O)(CH(2))(3)C(O)PO(3)HNa, and dicalcium glutarylbis(phosphonate) dihydrate, Ca(2)[O(3)PC(O)(CH(2))(3)C(O)PO(3)].2H(2)O, were prepared and characterized by chemical analyses, thermogravimetry and Fourier transform infrared spectroscopy (FTIR). The crystal structure of the Ca salt was determined by single-crystal X-ray diffraction. The crystals are orthorhombic with a = 10.970(1) Å, b = 23.694(2) Å, c = 5.580(1) Å, space group Pnma, and Z = 4. This study provides the first example of a structure of a calcium complex involving a nongeminal bis(phosphonate). The structure can be described in terms of a covalently pillared layer-type arrangement of neutral Ca-GlBP-Ca units along the b-axis. Each oxygen atom of the phosphonate group is bonded to a different Ca ion, and each Ca in turn is linked to three phosphonate groups. The Ca octahedra and the phosphonate tetrahedra form a two-dimensional polar sheet perpendicular to the b-axis. The chelate bonds involving the keto groups appear to be important links in the stabilization of the structure and, in turn, to the biological activity of bis(acylphosphonates). A near-perfect lattice match, found between the Ca phosphonate layer and the major crystal faces of hydroxyapatite, indicates that epitaxial growth or incorporation of GlBP can occur on the apatitic surface which may be the mode of action in the inhibition of calcification.

Journal Article↗

PubMedDate not supplied

Parallel synthesis and high throughput dissolution testing of biodegradable polyanhydride copolymers.

We have demonstrated that polycondensation reactions can be carried out in a combinatorial fashion and that the polymer library can be screened at high throughput using a rapid prototyping technique to fabricate multiwell substrates. A linearly varying compositional library of 100 different biodegradable polyanhydride random copolymers that are promising carriers for controlled drug delivery was designed, fabricated, and characterized by IR microscopy within a few hours. The polyanhydride copolymer library was based on 1,6-bis(p-carboxyphenoxy)hexane (CPH) and sebacic anhydride (SA) and was characterized with infrared microspectroscopy to determine the composition within each well. Since degradation and release rates depend on copolymer composition, we also developed new high-throughput methods to investigate drug release from this library of copolymers by designing specific wells for each task. A subset of this library was chosen, and a substrate was designed and fabricated to enable the synthesis and monitoring of dye dissolution from a range of polyanhydride copolymers in a parallel fashion using a CCD camera. Multisample substrates were fabricated with a novel rapid prototyping method that consists of an organic solvent-resistant array of 10 x 10 microwells of 2-muL volume each. The libraries were deposited with a custom-built liquid dispensing system consisting of a series of computer-controlled volume-dispensing pumps and XYZ motion stages. The parallel dye dissolution study displayed a decreasing rate of release with increasing CPH content. This result agrees with previously published data for dye release from poly(CPH-co-SA) copolymers. The methodology described in this work is amenable to numerous applications in the arenas of high-throughput polymer synthesis and characterization.

Biodegradation, Environmental↗