Biomedical subjects

Narayan Bhattarai

Publications and source records attributed to Narayan Bhattarai.

11 recordsLinked to original sources

PubMed2006

Novel block copolymer (PPDO/PLLA-b-PEG): enhancement of DNA uptake and cell transfection.

The cationic lipid mediated uptake of plasmid DNA by cells in monolayer culture was significantly enhanced with an aqueous solution of the block copolymer poly(p-dioxanone-co-L-lactide)-b-poly(ethylene glycol) (PPDO/PLLA-b-PEG). Plasmid uptake studies with DNA encoding the beta-galactosidase gene and cytotoxicity evaluations were performed on MCF-7, NIH 3T3 and CT-26 cell lines. Transfection yields and time courses for maximum release of FITC labeled DNA in MCF-7 cells were observed and quantified by beta-galactosidase assay and spectrofluorometry, respectively. The reported results suggest that the studied block copolymer might be useful for the enhancement of polycation mediated transfection and could find application in gene therapy.

3T3 Cells↗

PubMed2006

Hydrophilic nanofibrous structure of polylactide; fabrication and cell affinity.

Microstructure and architecture of the scaffolds along with the surface chemistry exert profound effect on biological activity (cell distribution, proliferation, and differentiation). For the biological activity, scaffolds in tissue engineering have been widely designed. The objective of this study was to develop hydrophilic nanofibrous structure of polylactides (PLLA) polymer in the form of nonwoven mat by electrospinning technique, and further evaluate the fibroblast NIH3T3 cell proliferation, morphology, and cell-matrix interaction. Hydrophilicity of the PLLA fibers was improved by adding small fraction of low molecular weight polyethylene glycol (PEG) into the electrospinning solution. Four different ratio types (100/0, 80/20, 70/30, and 50/50) of PLLA/PEG electrospun matrices were fabricated, and the pore characteristics, tensile properties, contact angle, and hydrolytic degradation were observed. Furthermore, scanning electron microscope (SEM) and fluorescence actin staining images were used for micro-observation of cell-matrix interaction and cell morphology. It was found that the electrospun mat of PLLA/PEG (80/20), composed of fibers with diameters in the range 540-850 nm, majority of pore diameter less than 100 microm, tensile strength 8 MPa, elongation 150%, porosity more than 90%, and improved hydrophilicity with slow hydrolytic degradation, is favorable for biological activity of NIH3T3 fibroblast cell. Based on these results, the correct composition of PLLA and PEG in the porous electrospun matrix (i.e., PLLA/PEG (80/20)) will be a better candidate rather than other compositions of PLLA/PEG as well as hydrophobic PLLA for application in tissue engineering.

3T3 Cells↗

PubMed2006

Stabilization of gold nanoparticles by hydrophobically-modified polycations.

Surface-modified gold nanoparticles have pronounced benefits in the biomedical field due to their significant interaction with delivery materials. In the present study we used hydrophobically-modified polycations (i.e., N-acylated chitosan) to stabilize gold nanoparticles. Aliphatic hydrophobic groups, having carbon chains of different lengths, were first grafted onto the backbone of chitosan by N-acylation with fatty-acid chlorides in order to increase its hydrophobicity. Gold nanoparticles stabilized with native chitosan and N-acylated chitosan were prepared by the graft-onto approach. Chemical modification and its quantification were studied by Fourier-transform infrared (FT-IR) spectroscopy. Further, the stabilized gold nanoparticles were characterized by different physico-chemical techniques such as UV-Vis, FT-IR, TEM, TGA and DLS. Spectral studies of gold nanoparticles show the backbone and the side chain functional groups of chitosan were not cleaved during the conjugation process. TEM observations revealed that the modified chitosan gold nanoparticles were well dispersed and spherical in shape with average size around 10-12 nm in triply-distilled water at pH 7.4, whereas the native chitosan gold nanoparticles appeared as clusters with 9.9 nm as average diameter and were dispersed only in dilute HCl. The size of modified chitosan gold nanoparticles varied depending on the length of grafting molecules.

Biocompatible Materials↗

PubMed2005

Spectroscopic identification of S-Au interaction in cysteine capped gold nanoparticles.

This study deals with the synthesis of cysteine capped gold nanoparticles with an average size of 12 nm by borohydride reduction and spectroscopic identification of SAu interaction. We have studied the interaction of thiol with gold nanoparticles in aqueous medium by employing UV-vis, Raman, NMR, and FT-IR spectroscopy. The shifting of gold plasmon resonance in the UV-vis spectra shows the stabilization of gold nanoparticles by cysteine. The disappearance of S-H stretching in both the IR and Raman spectra and the shifting of the NMR signals of the protons in close proximity to the metal center supported the existence of the S-Au interaction in cysteine capped gold nanoparticles. The TEM images shows cysteine capped gold nanoparticles as distinct and spherical entities as compared to free colloidal gold nanoparticles.

Cysteine↗

PubMed2005

PEG-grafted chitosan as an injectable thermosensitive hydrogel for sustained protein release.

Thermosensitive polymer hydrogels that undergo a sol-to-gel transition in response to temperature changes are of great interest in therapeutic delivery and tissue engineering as injectable depot systems. A chitosan-based, injectable thermogel was prepared by grafting an appropriate amount of PEG onto the chitosan backbone and studied for drug release in vitro using bovine serum albumin (BSA) as a model protein. When more than approximately 40 wt.% of PEG was grafted to chitosan chains via covalent bonding, the aqueous solution of the resultant copolymer was an injectable liquid at low temperature and transformed to a semisolid hydrogel at body temperature. After an initial burst release in the first 5 h, a steady linear release of protein from the hydrogel was achieved for a period of approximately 70 h. Prolonged quasi-linear release of protein up to 40 days was achieved by crosslinking the hydrogel with genipin in situ, in a fashion suitable for protein encapsulation while maintaining the injectability of the hydrogel. The crosslinkage transformed the copolymer from a physical gel to an insoluble chemical gel and substantially reduced the initial burst release of protein. Both high performance liquid chromatography (HPLC) and gel electrophoresis indicated that the primary structure of BSA released from the hydrogels with or without genipin-crosslinking was generally conserved. The hydrogel can be prepared in solutions with a physiological pH, allowing the safe incorporation of bioactive molecules for a broad range of medical applications, particularly for sustained in vivo drug release and tissue engineering.

Chitosan↗

PubMed2005

PEG-grafted chitosan as an injectable thermoreversible hydrogel.

PEG-grafted chitosan was formulated such that its solution undergoes a thermally reversed phase transition from an injectable free-flowing solution at low temperature to a gel at body temperature. Aqueous solutions of PEG-grafted chitosan can be prepared at physiological pH values, thereby allowing safe incorporation of bioactive molecules. This injectable thermoreversible hydrogel is potentially suitable for a wide range of biomedical applications, particularly in sustained in vivo drug release and tissue engineering. An aqueous solution of PEG-grafted chitosan polymer is injectable at low temperatures but forms a gel at body temperature.

Chitosan↗

PubMed2005

Electrospun chitosan-based nanofibers and their cellular compatibility.

Chitosan-based nanofibers with an average fiber diameter controllable from a few microns down to approximately 40 nm and a narrow size distribution were fabricated by electrospinning solutions containing chitosan, polyethylene oxide (PEO), and Triton X-100. Rheological study showed a strong dependence of spinnability and fiber morphology on solution viscosity and thus on chitosan-to-PEO ratio. The nanofibers can be deposited either as a nonwoven mat or as a highly aligned bundle of controllable size. Potential use of this nanofibrous matrix for tissue engineering was studied by examining its integrity in water and cellular compatibility. It was found that the matrix with a chitosan/PEO ratio of 90/10 retained excellent integrity of the fibrous structure in water. Experimental results from cell stain assay and SEM imaging showed that the nanofibrous structure promoted the attachment of human osteoblasts and chondrocytes and maintained characteristic cell morphology and viability throughout the period of study. This nanofibrous matrix is of particular interest in tissue engineering for controlled drug release and tissue remodeling.

Biocompatible Materials↗

PubMed2005

Optical and MRI multifunctional nanoprobe for targeting gliomas.

A multifunctional nanoprobe capable of targeting glioma cells, detectable by both magnetic resonance imaging and fluorescence microscopy, was developed. The nanoprobe was synthesized by coating iron oxide nanoparticles with covalently bound bifunctional poly(ethylene glycol) (PEG) polymer, which were subsequently functionalized with chlorotoxin and the near-infrared fluorescing molecule Cy5.5. Both MR imaging and fluorescence microscopy showed significant preferential uptake of the nanoparticle conjugates by glioma cells. Such a nanoprobe could potentially be used to image resections of glioma brain tumors in real time and to correlate preoperative diagnostic images with intraoperative pathology at cellular-level resolution.

Animals↗

PubMed2004

Novel biodegradable electrospun membrane: scaffold for tissue engineering.

Nonwoven fibrous matrixes have been widely used as scaffolds in tissue engineering, and modification of microstructure of these matrices is needed to organize cells in three-dimensional space with spatially balanced proliferation and differentiation required for functional tissue development. The objective of this study was fabrication of nanofibrous matrix from novel biodegradable poly(p-dioxanone-co-L-lactide)-block-poly(ethylene glycol) (PPDO/PLLA-b-PEG) copolymer, and to examine cell proliferation, morphology of cell-matrix interaction with the electrospun nanofibrous matrix. The electrospun structure composed of PPDO/PLLA-b-PEG fibers with an average diameters of 380 nm, median pore size 8 microm, porosity more than 80% and mechanical strength 1.4 MPa, is favorable for cell-matrix interaction and supports the active biocompatibility of the structure. NIH 3T3 fibroblast cell seeded on the structure tend to maintain phenotypic shape and guided growth according to nanofiber orientation. Good capability of the nanofibrous structure for supporting the cell attachment and proliferation are observed. This novel biodegradable scaffold will be applicable for tissue engineering based upon its unique architecture, which acts to support and guide cell growth.

3T3 Cells↗

PubMed2003

Electrospun nanofibrous polyurethane membrane as wound dressing.

Produced via electrospinning, polyurethane membrane, which has a unique property, has been of interest in medical fields. Electrospinning is a process by which nanofibers can be produced by an electrostatically driven jet of polymer solution. Electrospun fibers are collected in the form of membranes. The porous structured electrospun membrane is particularly important for its favorable properties: it exudates fluid from the wound, does not build up under the covering, and does not cause wound desiccation. The electrospun nanofibrous membrane shows controlled evaporative water loss, excellent oxygen permeability, and promoted fluid drainage ability, but still it can inhibit exogenous microorganism invasion because its pores are ultra-fine. Histological examination indicates that the rate of epithelialization is increased and the dermis becomes well organized if wounds are covered with electrospun nanofibrous membrane. This electrospun membrane has potential applications for wound dressing based upon its unique properties.

Animals↗

PubMed2003

Novel polymeric micelles of amphiphilic triblock copolymer poly (p-dioxanone-co-L-lactide)-block-poly (ethylene glycol).

PURPOSE: The objective of this study is to characterize the micelles of novel block copolymer of poly (p-Dioxanone-co-L-Lactide)-block-Poly (ethylene glycol) (PPDO/PLLA-b-PEG-) and evaluate its ability to induce gene transfection. METHODS: The ability of the block copolymer to self-assemble was determined by viscometery, dye solublization, NMR spectra and dynamic light scattering. The Trypan blue assay for in vitro biocompatibility of the block copolymer was carried out with NIH 3T3, CT-26 and MCF-7 cells, and beta-glactosidase assay was applied to measure the transfection efficiency of the block copolymer on MCF-7 breast cancer cell. RESULTS: Depending on the block lengths and molecular weights, solubility of the polymeric samples in water was varied. Diluted aqueous solution properties of the copolymer were studied. 1,6-Diphenyl-1,3,5-hexatriene solubilization and 1H NMR spectra carried out in CDCl3 and D2O, were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity, and lower negative zeta potential of -3 to -14 mV were observed on the aqueous copolymer dispersion. Copolymer was found with almost no cytotoxic effect and was able to promote the transfection efficiency (about 3-fold) in MCF-7 cells. CONCLUSIONS: The PPDO/PLLA-b-PEG copolymer has ability to assemble into nanoscopic structures in aqueous environment, which enable to enhance gene transfection.

Animals↗