PubMed Health⌕ Search

Biomedical subjects

Neil Coombs

Publications and source records attributed to Neil Coombs.

11 recordsLinked to original sources
PubMed2005

Block copolymers under periodic, strong three-dimensional confinement.

In this communication we study the influence of strong 3D confinement on the self-assembly of diblock copolymers containing a polyferrocenylsilane metallopolymer segment. Both silica colloidal crystals and silica inverse colloidal crystals, having nanometer-scale interconnected pore networks, are used as molds to direct the self-assembly. Unusual morphologies, such as concentric shells and branched lamellae, result from the interaction of the polymer with the high surface area topologically periodic templates.

Journal Article↗
PubMed2005

Redox-induced synthesis and encapsulation of metal nanoparticles in shell-cross-linked organometallic nanotubes.

A new approach to encapsulate silver nanoparticles inside block copolymer nanotubes is reported and involves an in situ redox reaction between a polyferrocenylsilane (PFS) inner wall and silver ions. Partial preoxidation of the PFS domains was found to be a key step for the efficient formation of one-dimensional arrays of silver nanoparticles confined within the nanotubes.

Ferrous Compounds↗
PubMed2004

Towards flexible inorganic "mesomaterials": one-pot low temperature synthesis of mesostructured nanocrystalline titania.

We hereby report a simple route for the low temperature synthesis of mesoporous nanocrystalline titania involving brief hydrothermal treatment of butanolic precursors and non-ionic tri-block-copolymer surfactant at 100 degrees C, followed by evaporation induced self assembly to make a crack-free flexible film. At no time in the film-forming process is a temperature of more than 120 degrees C reached, thereby permitting the use of substrates that are not stable to higher temperatures.

Journal Article↗
PubMed2003

Novel route to periodic mesoporous aminosilicas, PMAs: ammonolysis of periodic mesoporous organosilicas.

A new route to periodic mesoporous aminosilicas (PMAs) that contain amine functional groups in the framework of a mesoporous network is reported. The materials are prepared via thermal ammonolysis of periodic mesoporous organosilicas (PMOs) under a flow of ammonia gas. PMOs integrate similar or even higher quantities of nitrogen-containing groups upon ammonolysis than similarly treated ordered mesoporous silicas (MCM-41). The quantity of amine groups introduced into the materials was found to depend strongly on the ammonolysis temperature. The largest loading of amine groups was obtained when a well-ordered cubic methylene PMO material without prior vacuum-drying was thermolyzed in ammonia. The ordered mesoporosity of PMOs was preserved during the ammonolysis with only a slight decrease in the mesopore size and the degree of mesostructural ordering. The extent of substitution of framework oxygen by amine and nitride groups was established by solid-state (29)Si CP-MAS, (29)Si MAS, (15)N MAS, and (13)C CP-MAS NMR spectroscopies, elemental analysis, and X-ray photoelectron spectroscopy. In some cases, methylene and methyl functional groups were also present in the PMAs along with amine functional groups, as inferred from elemental analysis and gas adsorption, particularly in cases where PMOs were subjected to ammonolysis at 400 and 550 degrees C for several hours. This resulted in new multifunctional mesoporous organoaminosilica nanomaterials with properties that could be tuned by systematically varying the relative amounts of hydrophilic amine and hydrophobic hydrocarbon pendent and framework groups. The stability upon storage was found to be much higher for PMAs obtained from PMOs than for those obtained from MCM-41 silicas under the same conditions.

Journal Article↗
PubMed2003

Lanthanum strontium manganite/yttria-stabilized zirconia nanocomposites derived from a surfactant assisted, co-assembled mesoporous phase.

A one-pot, soft-chemistry, surfactant-assisted co-assembly approach to prepare La(1-x)Sr(x)MnO(3) (LSM)/Y(2)O(3)-stabilized ZrO(2) (YSZ) nanocomposites for use as solid oxide fuel cell (SOFC) cathodes has been investigated. This material with sub-hundred nanometer grain sizes for each phase is the first such nanocomposite where aqueous-based precursors of each component are incorporated in a single synthetic step. This approach utilizes the co-assembly of an anionic yttrium/zirconium acetatoglycolate gel, cetyltrimethylammonium bromide as the cationic surfactant template, and inorganic La, Mn, and Sr salts under alkaline aqueous conditions. The resulting as-synthesized product is an amorphous mesostructured organic/inorganic composite, which is transformed to a mesoporous inorganic oxide with nanocrystalline YSZ walls upon calcination. Calcination to temperatures above 600 degrees C lead to collapse of the mesopores followed by further crystallization of the nanocrystalline YSZ phase and a final crystallization of the LSM perovskite phase above 1000 degrees C. Both the fully crystalline LSM/YSZ and the mesoporous intermediate phase have been investigated for phase homogeneity by TEM energy-dispersive X-ray spectroscopy (EDX) mapping and spot analysis which confirm the dispersion of LSM within a YSZ matrix at the nanometer scale. Impedance spectroscopy analysis of LSM/YSZ nanocomposite electrodes demonstrate a low polarization resistance of around 0.2 omega cm(2) with an activation energy (E(a)) as low as 1.42 eV. Cathodic polarization studies show stable current densities over a 40 h test demonstration.

Journal Article↗
PubMed2002

A new approach to hybrid nanocomposite materials with periodic structures.

Hybrid core-shell polymer-semiconductor or polymer-metal microspheres were used in the "bottom-top" approach to production of nanocomposite materials with periodic structures. In the first step CdS and Ag nanocrystals were synthesized in situ on the surface of polymer microspheres using ion exchange between the counter ions in the electrical double layer of latex beads and ions in the liquid medium. In the second step a low-Tg polymeric shell was synthesized on the surface of hybrid particles, which upon annealing of the periodic array of three-layer microbeads formed a matrix. The proposed strategy employing hybrid microspheres as the functional structural blocks shows a new way to produce optically responsive materials with periodicity commensurable with the wavelength of light, an intrinsic property of photonic crystals.

Journal Article↗
PubMed2002

Polyferrocenylsilane microspheres: synthesis, mechanism of formation, size and charge tunability, electrostatic self-assembly, and pyrolysis to spherical magnetic ceramic particles.

Pt(0)-catalyzed ring-opening precipitation copolymerization of [1]silaferrocenophanes fcSiMe(2) (3) and the spirocyclic cross-linker fcSi(CH(2))(3) (4) (fc = Fe(eta(5)-C(5)H(4))(2)) was used to prepare polyferrocenylsilane microspheres (PFSMSs) under mild conditions. By varying the reaction conditions, a wide variety of other morphologies was obtained. The effects of temperature, monomer ratio, solvent composition, catalyst concentration, and time on the observed morphology were investigated and interpreted in terms of a mechanism for microsphere formation. The most well-defined particles were formed using equimolar amounts of 3 and 4, in a 50:50 mixture of xylenes and decane at 60 degrees C with gentle agitation. Chemical oxidation of the polymeric microspheres led to positively charged particles (OPFSMSs) which underwent electrostatically driven self-assembly with negatively charged silica microspheres to form core-corona composite particles. Redox titration with controlled amounts of the one-electron oxidant [N(C(6)H(4)Br-p)(3)][PF(6)] in acetonitrile led to the oxidation of the outer 0.15 microm (ca. 32%) of the PFSMSs. The resulting OPFSMSs were reduced back to their neutral form by reaction with hydrazine in methanol. Pyrolysis of the PFSMSs led to spherical magnetic ceramic replicas with tunable magnetic properties that organize into ordered 2-D arrays at the air-water interface under the influence of a magnetic field.

Journal Article↗
PubMed2002

Genesis of nanostructured, magnetically tunable ceramics from the pyrolysis of cross-linked polyferrocenylsilane networks and formation of shaped macroscopic objects and micron scale patterns by micromolding inside silicon wafers.

The ability to form molded or patterned metal-containing ceramics with tunable properties is desirable for many applications. In this paper we describe the evolution of a ceramic from a metal-containing polymer in which the variation of pyrolysis conditions facilitates control of ceramic structure and composition, influencing magnetic and mechanical properties. We have found that pyrolysis under nitrogen of a well-characterized cross-linked polyferrocenylsilane network derived from the ring-opening polymerization (ROP) of a spirocyclic [1]ferrocenophane precursor gives shaped macroscopic magnetic ceramics consisting of alpha-Fe nanoparticles embedded in a SiC/C/Si(3)N(4) matrix in greater than 90% yield up to 1000 degrees C. Variation of the pyrolysis temperature and time permitted control over the nucleation and growth of alpha-Fe particles, which ranged in size from around 15 to 700 A, and the crystallization of the surrounding matrix. The ceramics contained smaller alpha-Fe particles when prepared at temperatures lower than 900 degrees C and displayed superparamagnetic behavior, whereas the materials prepared at 1000 degrees C contained larger alpha-Fe particles and were ferromagnetic. This flexibility may be useful for particular materials applications. In addition, the composition of the ceramic was altered by changing the pyrolysis atmosphere to argon, which yielded ceramics that contain Fe(3)Si(5). The ceramics have been characterized by a combination of physical techniques, including powder X-ray diffraction, TEM, reflectance UV-vis/near-IR spectroscopy, elemental analysis, XPS, SQUID magnetometry, Mössbauer spectroscopy, nanoindentation, and SEM. Micromolding of the spirocyclic [1]ferrocenophane precursor within soft lithographically patterned channels housed inside silicon wafers followed by thermal ROP and pyrolysis enabled the formation of predetermined micron scale designs of the magnetic ceramic.

Journal Article↗