PubMed Health⌕ Search

Biomedical subjects

Newell R Washburn

Publications and source records attributed to Newell R Washburn.

18 recordsLinked to original sources
PubMed2007

Interphase effects in dental nanocomposites investigated by small-angle neutron scattering.

Small-angle and ultrasmall-angle neutron scattering (SANS and USANS) were used to characterize silica nanoparticle dispersion morphologies and the interphase in thermoset dimethacrylate polymer nanocomposites. Silica nanoparticle fillers were silanized with varying mass ratios of 3-methacryloxypropyltrimethoxysilane (MPTMS), a silane that interacts with the matrix through covalent and H-bonding, and n-octyltrimethoxysilane (OTMS), a silane that interacts through weak dispersion forces. Interphases with high OTMS mass fractions were found to be fractally rough with fractal dimensions, D(s), between 2.19 and 2.49. This roughness was associated with poor interfacial adhesion and inferior mechanical properties. Mean interparticle distances calculated for composites containing 10 mass % and 25 mass % silica suggest that the nanoparticles treated with more MPTMS than OTMS may be better dispersed than OTMS-rich nanoparticles. The results indicate that the covalent bonding and H-bonding of MPTMS-rich nanoparticles with the matrix are necessary for preparing well-dispersed nanocomposites. In addition, interphases containing equal masses of MPTMS and OTMS may yield composites with overall optimal properties. Finally, the combined SANS/USANS data could distinguish the differences, as a function of silane chemistry, in the nanoparticle/silane and silane/matrix interfaces that affect the overall mechanical properties of the composites.

Dental Materials↗
PubMed2006

Macrophage response to methacrylate conversion using a gradient approach.

Incomplete conversion, an ongoing challenge facing photopolymerized methacrylate-based polymers, affects leachables as well as the resulting polymer network. As novel polymers and composites are developed, methods to efficiently screen cell response to these materials and their properties, including conversion, are needed. In this study, an in vitro screening methodology was developed to assess cells cultured directly on cross-linked polymer networks. A gradient in methacrylate double bond conversion was used to increase the experimental throughput. A substrate of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl] propane (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) was prepared with a conversion ranging from 43.0% to 61.2%. Substrates aged for 7 days had no significant differences in surface roughness or hydrophilicity as a function of conversion. Leachables were detectable for at least 7 days using UV absorption, but their global cytotoxicity was insignificant after 5 days of aging. Thus, RAW 264.7 macrophage-like cells were cultured on aged substrates to evaluate the cell response to conversion, with possible contributions from the polymer network and local leachables. Conversions of 45% and 50% decreased viability (via calcein/ethidium staining) and increased apoptosis (via annexin-V staining). No significant changes (p>0.05) in tumor necrosis factor-alpha and interleukin-1beta gene expression, as measured by quantitative, real-time reverse transcription-polymerase chain reaction, were seen as conversion increased. Thus, conversions greater than 50% are recommended for equimolar BisGMA/TEGDMA. The ability to distinguish cell response as a function of conversion is useful as an initial biological screening platform to optimize dental polymers.

Animals↗
PubMed2006

Encapsulated chondrocyte response in a pulsatile flow bioreactor.

We have developed a bioreactor-based millifluidic technique that allows for dynamic culture conditions and measurement of the fluid flow impinging upon a three-dimensional tissue engineering scaffold. Chondrocytes in scaffolds have been shown to require mechanical stimulation to produce an extracellular matrix that resembles native cartilage. This study investigates the effect of pulsatile flow on chondrocyte response in a model poly(ethylene glycol) dimethacrylate hydrogel. Bovine chondrocytes were encapsulated in the hydrogel and cultured for 7, 14 and 21 days at pulsatile flow frequencies of 0.5 Hz (15ml/min) and 1.5Hz (17ml/min). The scaffolds cultured under dynamic conditions were compared to those cultured under static (non-flow) conditions. Quantitative real-time reverse transcription polymerase chain reaction was used to quantify collagen type I, collagen type II and aggrecan gene copy numbers as markers for chondrocyte phenotypic expression. Histological sections stained with hematoxylin & eosin, and Alcian blue confirmed chondrocyte morphology and matrix formation. Interestingly, regulation of the collagen type II gene was particularly sensitive to the flow conditions. The understanding of the cell response to encapsulation and flow could be used to identify the appropriate culture conditions necessary to design and develop hydrogel carriers to promote the formation of extracellular matrix as well as to further our knowledge of chondrocyte mechanobiology.

Animals↗
PubMed2006

Combinatorial screen of the effect of surface energy on fibronectin-mediated osteoblast adhesion, spreading and proliferation.

In order to accelerate tissue-engineering research, a combinatorial approach for investigating the effect of surface energy on cell response has been developed. Surface energy is a fundamental material property that can influence cell behavior. Gradients in surface energy were created by using an automated stage to decelerate a glass slide coated with a self-assembled monolayer (SAM, n-octyldimethylchlorosilane) beneath a UV lamp such that the SAM is exposed to the UV-light in a graded fashion. UV exposure causes oxidation of the SAM such that a longer exposure correlates with increased hydrophilicity. This approach yielded substrates having a linear gradient in surface energy ranging from 23 to 62 mN/m (water contact angles ranging from 25 degrees to 95 degrees ). Using the gradient specimen approach enables all surface energies from 23 to 60 mN/m to be screened on each slide. Before cell culture, surface energy gradients were coated with fibronectin to allow a study of the effect of surface energy on fibronectin-mediated cell response. Cells were seeded on the fibronectin-coated gradients and adhesion, spreading and proliferation were assessed with automated fluorescence microscopy. Surface energy did not affect initial cell adhesion at 8h. However, the rate of proliferation was linearly dependent on surface energy and increased with increasing hydrophobicity. Cell spread area was unaffected by changes in surface energy over the majority of the gradient although cells were significantly smaller on the most hydrophilic region. These results show that fibronectin-mediated cell spreading and proliferation are dependent on surface energy and establish a new combinatorial approach for screening cell response to changes in surface energy.

3T3 Cells↗
PubMed2006

Cellular response to phase-separated blends of tyrosine-derived polycarbonates.

Two-dimensional thin films consisting of homopolymer and discrete compositional blends of tyrosine-derived polycarbonates were prepared and characterized in an effort to elucidate the nature of different cell responses that were measured in vitro. The structurally similar blends were found to phase separate after annealing with domain sizes dependent on the overall composition. The thin polymer films were characterized with the use of atomic force microscopy (AFM), water contact angles, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) and significant changes in roughness were measured following the annealing process. Genetic expression profiles of interleukin-1beta and fibronectin in MC3T3-E1 osteoblasts and RAW 264.7 murine macrophages were measured at several time points, demonstrating the time and composition-dependent nature of the cell responses. Real-time reverse transcriptase polymerase chain reaction (RT-PCR) depicted upregulation of the fibronectin gene copy numbers in each of the blends relative to the homopolymers. Moreover, the interleukin-1beta expression profile was found to be compositionally dependent. The data suggest strongly that optimal composition and processing conditions can significantly affect the acute inflammatory and extracellular matrix production responses.

Animals↗
PubMed2005

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces.

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.

Adsorption↗
PubMed2005

Cytotoxicity of three-dimensionally ordered macroporous sol-gel bioactive glass (3DOM-BG).

In this study, 80% SiO(2)-20% CaO (mole fraction) three-dimensionally ordered macroporous sol-gel bioactive glass (3DOM-BG, average pore size: 345 nm) particles were prepared and characterized. Since the 3DOM-BGs have a novel microstructure and ion-releasing profile, the cytotoxicity of 3DOM-BG particles was tested. The cytotoxicity tests were performed using MC3T3-E1 osteoblast-like cells: (1) Wst-1 assay for cell viability after culture in extracts from 3DOM-BG particles; (2) phase contrast microscopy for cell morphology after culture with 3DOM-BG particles; and (3) fluorescence microscopy for imaging cells cultured directly on 3DOM-BG particles. The results showed that 3DOM-BG particles were not cytotoxic, and that cells attached, spread and proliferated on and around 3DOM-BG particles.

3T3 Cells↗
PubMed2005

The quantification of cellular viability and inflammatory response to stainless steel alloys.

The biocompatibility of metallic alloys is critical to the success of many orthopedic therapies. Corrosion resistance and the immune response of the body to wear debris products ultimately determine the performance of these devices. The establishment of quantitative tests of biocompatibility is an important issue for biomaterials development. We have developed an in vitro model to measure the pro-inflammatory cytokine production and in this study investigated the cellular responses induced by nitrogenated and 316L stainless steel alloys in both particulate and solid form. We utilized a murine macrophage cell line, RAW 264.7, to characterize and compare the mRNA profiles of TNF-alpha and IL-1beta in these cells using real time-polymerase chain reaction (RT-PCR). Fluorescence microscopy and flow cytometry were used to probe the viability of the population and to examine the apoptotic pathway. The goals of this work were to develop improved measurement methods for the quantification of cellular inflammatory responses to biomaterials and to obtain data that leads to an enhanced understanding of the ways in which the body responds to biomaterials. Using these techniques, we observed evidence for an association between the upregulation of IL-1beta and reversible apoptosis, and the upregulation of TNF-alpha and irreversible apoptosis.

Alloys↗
PubMed2005

Combinatorial screening of cell proliferation on poly(L-lactic acid)/poly(D,L-lactic acid) blends.

We have combined automated fluorescence microscopy with a combinatorial approach for creating polymer blend gradients to yield a rapid screening method for characterizing cell proliferation on polymer blends. A gradient in polymer blend composition of poly(L-lactic acid) (PLLA) and poly(D,L-lactic acid) (PDLLA) was created in the form of a strip-shaped film and was annealed to allow PLLA to crystallize. Fourier transform infrared (FTIR) microspectroscopy was used to determine the composition in the gradients and atomic force microscopy was used to characterize surface topography. Osteoblasts were cultured on the gradients and proliferation was assessed by automated counting of cells using fluorescence microscopy. Surface roughness varied with composition, was smooth on PDLLA-rich regions and was rough on the PLLA-rich regions. Cell adhesion was similar on all regions of the gradients while proliferation was faster on the smooth, PDLLA-rich end of the gradients than on the rough, PLLA-rich end of the gradients. These results demonstrate the feasibility of a new, combinatorial approach for evaluating cell proliferation on polymer blends.

3T3 Cells↗
PubMed2004

Bone formation in polymeric scaffolds evaluated by proton magnetic resonance microscopy and X-ray microtomography.

Magnetic resonance microscopy (MRM) and X-ray microtomography (XMT) were used to investigate de novo bone formation in porous poly(ethyl methacrylate) (PEMA) scaffolds, prepared by a novel co-extrusion process. PEMA scaffolds were seeded with primary chick calvarial osteoblasts and cultured under static conditions for up to 8 weeks. Bone formation within porous PEMA scaffolds was confirmed by the application of histologic stains to intact PEMA disks. Disks were treated with Alizarin red to visualize calcium deposits and with Sirius red to visualize regions of collagen deposition. DNA analysis confirmed that cells reached confluence on the scaffolds after 7 weeks in static culture. The formation of bone in PEMA scaffolds was investigated with water proton MRM. Quantitative MRM maps of the magnetization transfer ratio (MTR) yielded maps of protein deposition, and magnetic resonance (MR) relaxation times (T1 and T2) yielded maps of mineral deposition. The location of newly formed bone and local mineral concentrations were confirmed by XMT. By comparing MRM and XMT data from selected regions-of-interest in one sample, the inverse relationship between the MR relaxation times and mineral concentration was validated, and calibration curves for estimating the mineral content of cell-seeded PEMA scaffolds from quantitative MRM images were developed.

Animals↗
PubMed2004

Quantification of inflammatory cellular responses using real-time polymerase chain reaction.

The introduction of tissue engineering strategies for the repair and replacement of human body components extends the application and importance of biomaterials. Implanted biomaterials frequently evoke inflammatory responses that are complex and not well understood at present. The goals of this work were to develop improved measurement methods for the quantification of cellular inflammatory responses to biomaterials and obtain data that lead to an enhanced understanding of the ways in which the body responds to the introduction of biomaterials. To evaluate the biocompatibility of materials, we established a system that allows for the analysis and quantitation of cellular inflammatory responses in vitro. In this study, the inflammatory responses of murine macrophages (RAW 264.7) were analyzed. The cells were incubated with polymethylmethacrylate (PMMA) microspheres in the presence and absence of lipopolysaccharide (LPS) at 8 and 18 h. The analysis of the genetic material obtained from the cells was quantitated using real-time reverse transcription polymerase chain reaction (RT-PCR). The cell populations treated with LPS or PMMA microspheres singly resulted in an elevation of cytokine levels compared to the untreated control. LPS resulted in a 258-fold increase, while PMMA resulted in an 87.9-fold increase at 8 h. RAW 264.7 cells incubated with LPS and PMMA particles demonstrated a synergistic effect by producing a marked increase in the level of cytokine expression, 336-fold greater than that of the untreated control at 8 h. Fluorescence microscopy studies that assessed cellular viability were also performed and are consistent with the RT-PCR results.

Animals↗
PubMed2004

Solid-phase ATRP synthesis of peptide-polymer hybrids.

A versatile methodology to prepare hybrid biomaterials by atom transfer radical polymerization from resin-supported peptides has been established. As an example, we have synthesized a GRGDS-functionalized poly(2-hydroxyethyl methacrylate). The peptide-polymer was characterized by solid-state (13)C NMR and GPC and found to have a number average molecular weight of 4420 and a polydispersity of 1.47. These values are comparable to those obtained from solution-phase syntheses, suggesting the ATRP reaction is successful from a peptide-conjugated solid support. Solid-state (13)C NMR was used to characterize multiple steps in the reaction, and the synthesis was found to be near quantitative. We have performed cell adhesion experiments and observed the GRGDS sequence-promoted cell adhesion, whereas unfunctionalized poly(2-hydroxyethyl methacrylate) did not. By incorporating cell-signaling moieties in materials with defined molecular architecture, it will be possible to control the interactions between polymeric materials and biological systems.

Animals↗
PubMed2004

Biocompatibility of sorbitol-containing polyesters. Part I: Synthesis, surface analysis and cell response in vitro.

A series of sorbitol-containing polyesters were synthesized via a one-pot lipase-catalyzed condensation polymerization. Thin films were prepared by spin coating on silicon wafers and surfaces were analyzed by tapping mode atomic force microscopy and contact angle measurements. Surface morphologies and surface energies across the series of polyester films, including a poly(epsilon-caprolactone) (PCL) control were nearly indistinguishable. Biocompatibility of the sorbitol-containing polyester series was evaluated against a PCL control by measuring cell spreading and proliferation of a mouse fibroblast 3T3 cell line in vitro. Results confirmed that the sorbitol-containing polyester surfaces elicited cell behavior similar to the PCL control. These results establish the sorbitol-containing polyester series as a promising material for tissue engineering research and development.

3T3 Cells↗
PubMed2002

Co-extrusion of biocompatible polymers for scaffolds with co-continuous morphology.

A methodology for the preparation of porous scaffolds for tissue engineering using co-extrusion is presented. Poly(epsilon-caprolactone) is blended with poly(ethylene oxide) in a twinscrew extruder to form a two-phase material with micron-sized domains. Selective dissolution of the poly(ethylene oxide) with water results in a porous material. A range of blend volume fractions results in co-continuous networks of polymer and void spaces. Annealing studies demonstrate that the characteristic pore size may be increased to larger than 100 microm. The mechanical properties of the scaffolds are characterized by a compressive modulus on the order of 1 MPa at low strains but displaying a marked strain-dependence. The results of osteoblast seeding suggest it is possible to use co-extrusion to prepare polymer scaffolds without the introduction of toxic contaminants. Polymer co-extrusion is amenable to both laboratory- and industrial-scale production of scaffolds for tissue engineering and only requires rheological characterization of the blend components. This method leads to scaffolds that have continuous void space and controlled characteristic length scales without the use of potentially toxic organic solvents.

Algorithms↗
PubMedDate not supplied

High-throughput investigation of osteoblast response to polymer crystallinity: influence of nanometer-scale roughness on proliferation.

A high-throughput method for analyzing cellular response to crystallinity in a polymer material is presented. Variations in crystallinity lead to changes in surface roughness on nanometer length scales, and it is shown that cells are exquisitely sensitive to these changes. Gradients of polymer crystallinity were fabricated on films of poly(L-lactic acid) using a gradient in annealing temperature. The resultant morphologies were characterized using an atomic force microscope. Root-mean-square (rms) roughness values ranging from 0.5 to 13 nm were created on a single sample. MC3T3-E1 osteoblastic cells were cultured for 1, 3 and 5 d, and the number of cells was measured using automated fluorescence microscopy. It is shown that the rate of proliferation on the smooth regions of the films is much greater than that on the rough regions, and a monotonic variation in rate is observed as a function of roughness. The critical rms roughness, above which a statistically significant reduction in rate of proliferation occurs, was approximately 1.1 nm. Fluorescence microscopy measurements on immunostained cells indicate there is no significant change in cell area, the number or type of adhesions formed, or the degree of actin polymerization. Results from enzyme-linked immunofluorescence assays indicated that there was no detectable change in adhesion protein accessibility, suggesting the cells directly respond to substrate topography. The use of the gradient library approach yielded the functional dependence of cell proliferation on nanometer-scale roughness and gave a sensitive estimate of the critical roughness for which a decrease in proliferation is observed.

3T3 Cells↗
PubMedDate not supplied

Synthesis and characterization of PEG dimethacrylates and their hydrogels.

Facile synthesis and detailed characterization of photopolymerizable and biocompatible poly(ethylene glycol) dimethacrylates (PEGDM) and poly(ethylene glycol) urethane-dimethacrylates (PEGUDM) are described. Poly(ethylene glycol)s of various molecular masses (M(n) = 1000 to 8000 g/mol) were reacted with methacrylic anhydride or with 2-isocyanatoethyl methacrylate to form PEGDMs and PEGUDMs, respectively. PEGDMs were also prepared by a microwave-assisted route to achieve fast reaction conversions under solvent free conditions. Combined analyses of (1)H NMR and MALDI-TOF MS confirmed the formation of prepolymers of high purity and narrow mass distribution (PD < 1.02). Aqueous solutions of the PEGDMs and PEGUDMs (10% and 20% by mass fraction) were photopolymerized to yield hydrogels. Bovine chondrocytes, seeded in the hydrogels, were used to assess the biocompatibility. Preliminary rheology and uniaxial compression measurements showed varied mechanical response, and biocompatibility studies showed that cells are completely viable in both types of hydrogels after two weeks.

Animals↗
PubMedDate not supplied

In situ formation of blends by photopolymerization of poly(ethylene glycol) dimethacrylate and polylactide.

Blends of cross-linked poly(ethylene glycol) dimethacrylate (PEGDMA) and poly(d,l-lactide) (PLA) were prepared by mixing photoactive PEGDMA (molecular mass: 875 g/mol) and PLA, and subsequently photopolymerizing the mixture with visible light. The effects of PLA molecular mass and mass fraction on the rheological properties of the PEGDMA/PLA mixtures, and on the degree of methacrylate vinyl conversion (DC), as well as blend miscibility, microstructure, mechanical properties, in vitro swelling behavior, and cell responses were studied. PLA-2K (molecular mass: 2096 g/mol) and PLA-63K (molecular mass: 63 000 g/mol) formed miscible and partially miscible blends with cross-linked PEGDMA, respectively. The addition of the PLA-2K did not affect the immediate or post-cure (>24 h) DC of the PEGDMA upon photopolymerization. However, the addition of PLA-63K decreased the immediate DC of the PEGDMA, which can be increased through extending the curing time or post-curing period. Compared to the cross-linked neat PEGDMA and PLA-2K/PEGDMA blends, PLA-63K/PEGDMA blends were significantly stronger, stiffer, and tougher. Both types of blends and the cross-linked PEGDMA swelled when soaked in a phosphate buffered saline (PBS) solution. The attachment and spreading of MCT3-E1 cells increased with increasing PLA-63K content in the blends. The facile and rapid formation of PEGDMA/PLA blends by photopolymerization represents a simple and efficient approach to a class of biomaterials with a broad spectrum of properties.

Acrylates↗