Biomedical subjects

Nicholas A T Brown

Publications and source records attributed to Nicholas A T Brown.

8 recordsLinked to original sources

PubMed2006

Static versus dynamic loading in the mechanical modulation of vertebral growth.

STUDY DESIGN: Measures of absolute and relative growth modulation were used to determine the effects of static and dynamic asymmetric loading of vertebrae in the rat tail. OBJECTIVES: To quantify the differences between static and dynamic asymmetric loading in vertebral bone growth modulation. SUMMARY OF BACKGROUND DATA: The creation and correction of vertebral wedge deformities have been previously described in a rat-tail model using static loading. The effects of dynamic loading on growth modulation in the spine have not been characterized. METHODS: A total of 36 immature Sprague-Dawley rats were divided among four different groups: static loading (n = 12, 0.0 Hz), dynamic loading (n = 12, 1.0 Hz), sham operated (n = 6), and growth controls (n = 6). An external fixator was placed across the sixth and eighth caudal vertebrae as the unviolated seventh caudal vertebra was evaluated for growth modulation. Static or dynamic asymmetric loads were applied at a loading magnitude of 55% body weight. After 3 weeks of loading, growth modulation was assessed using radiographic measurements of vertebral wedge angles and vertebral body heights. RESULTS: The dynamically loaded rats had a final average wedge deformity of 15.2+/- 6.4 degrees, which was significantly greater than the statically loaded rats whose final deformity averaged 10.3 degrees +/- 3.7 degrees (P < 0.03). The deformity in both groups was statistically greater than the sham-operated (1.1+/- 2.0 degrees) and growth control rats (0.0+/- 1.0 degrees) (P < 0.001). The longitudinal growth was significantly lower on the concavity compared with the convexity in both the dynamically (0.34 +/- 0.23 mm vs. 0.86 +/- 0.23 mm) and statically (0.46 +/- 0.19 mm vs. 0.83 +/- 0.32 mm) loaded rats (P < 0.001). These growth rates were significantly less than the sham operated and growth control rats (P < 0.001). CONCLUSIONS: A variety of fusionless scoliosis implant strategies have been proposed that use both rigid and flexible implants to modulate vertebral bone growth. The results from this study demonstrate that dynamic loading of the vertebrae provides the greatest growth modulation potential.

Animals↗

PubMed2006

The role of segmental mass and moment of inertia in dynamic-contact task construction.

The authors examined whether differences between children and adults in the application of muscle forces during a dynamic-contact task (cycling) can be attributed to children's relatively lower segmental mass and moment of inertia. They examined pedal-force construction as adults and younger and older children (n = 7 in each group), with and without mass added to their limbs, pedaled an appropriately scaled bicycle ergometer. When mass was added to their limbs, children adjusted muscular forces on the pedal in a way that began to approach the pattern demonstrated by adults. Because age, neuromotor maturation, and motor experience were held constant, it seems plausible that by 6 to 8 years of age, and perhaps younger, physical size and growth limit children's production of adult-like muscle forces on the pedal.

Adaptation, Physiological↗

PubMed2003

Architectural properties of distal forelimb muscles in horses, Equus caballus.

Articular injuries in athletic horses are associated with large forces from ground impact and from muscular contraction. To accurately and noninvasively predict muscle and joint contact forces, a detailed model of musculoskeletal geometry and muscle architecture is required. Moreover, muscle architectural data can increase our understanding of the relationship between muscle structure and function in the equine distal forelimb. Muscle architectural data were collected from seven limbs obtained from five thoroughbred and thoroughbred-cross horses. Muscle belly rest length, tendon rest length, muscle volume, muscle fiber length, and pennation angle were measured for nine distal forelimb muscles. Physiological cross-sectional area (PCSA) was determined from muscle volume and muscle fiber length. The superficial and deep digital flexor muscles displayed markedly different muscle volumes (227 and 656 cm3, respectively), but their PCSAs were very similar due to a significant difference in muscle fiber length (i.e., the superficial digital flexor muscle had very short fibers, while those of the deep digital flexor muscle were relatively long). The ulnaris lateralis and flexor carpi ulnaris muscles had short fibers (17.4 and 18.3 mm, respectively). These actuators were strong (peak isometric force, Fmax=5,814 and 4,017 N, respectively) and stiff (tendon rest length to muscle fiber length, LT:LMF=5.3 and 2.1, respectively), and are probably well adapted to stabilizing the carpus during the stance phase of gait. In contrast, the flexor carpi radialis muscle displayed long fibers (89.7 mm), low peak isometric force (Fmax=555 N), and high stiffness (LT:LMF=1.6). Due to its long fibers and low Fmax, flexor carpi radialis appears to be better adapted to flexion and extension of the limb during the swing phase of gait than to stabilization of the carpus during stance. Including muscle architectural parameters in a musculoskeletal model of the equine distal forelimb may lead to more realistic estimates not only of the magnitudes of muscle forces, but also of the distribution of forces among the muscles crossing any given joint.

Animals↗

PubMed2003

The development of contact force construction in the dynamic-contact task of cycling [corrected].

Purposeful movement requires that an individual produce appropriate joint torques to accelerate segments, and when environmental contact is involved, to develop task-appropriate contact forces. Developmental research has been confined largely to the mastery of unconstrained movement skills (pointing, kicking). The purpose of this study was to study the developmental progression that characterizes the interaction of muscular and non-muscular forces in tasks constrained by contact with the environment. Seven younger children (YC, 6-8 years), 7 older children (OC, 9-11 years) and 7 adults (AD) pedaled an ergometer (80 rpm) at an anthropometrically scaled cycling power. Resultant forces measured at the pedal's surface were decomposed into muscle, inertia and gravity components. Muscle pedal forces were further examined in terms of the underlying lower extremity joint torques and kinematic weights that constitute the muscular component of the pedal force. Data showed children applied muscle forces to the pedal in a significantly different manner compared to adults, and that this was due to the children's lower segmental mass and inertia. The children adjusted the contribution of the proximal joint muscle torques to compensate for reduced contributions to the resultant pedal force by gravitational and inertial components. These data show that smaller segmental mass and inertia limit younger children's ability to construct the dynamic-contact task of cycling in an adult-like form. On the basis of these results, however, the children's response was not "immature". Rather, the results show a task-appropriate adaptation to lower segmental mass and inertia.

Adult↗

PubMed2003

Force- and moment-generating capacities of muscles in the distal forelimb of the horse.

A detailed musculoskeletal model of the distal equine forelimb was developed to study the influence of musculoskeletal geometry (i.e. muscle paths) and muscle physiology (i.e. force-length properties) on the force- and moment-generating capacities of muscles crossing the carpal and metacarpophalangeal joints. The distal forelimb skeleton was represented as a five degree-of-freedom kinematic linkage comprised of eight bones (humerus, radius and ulna combined, proximal carpus, distal carpus, metacarpus, proximal phalanx, intermediate phalanx and distal phalanx) and seven joints (elbow, radiocarpal, intercarpal, carpometacarpal, metacarpophalangeal (MCP), proximal interphalangeal (pastern) and distal interphalangeal (coffin)). Bone surfaces were reconstructed from computed tomography scans obtained from the left forelimb of a Thoroughbred horse. The model was actuated by nine muscle-tendon units. Each unit was represented as a three-element Hill-type muscle in series with an elastic tendon. Architectural parameters specifying the force-producing properties of each muscle-tendon unit were found by dissecting seven forelimbs from five Thoroughbred horses. Maximum isometric moments were calculated for a wide range of joint angles by fully activating the extensor and flexor muscles crossing the carpus and MCP joint. Peak isometric moments generated by the flexor muscles were an order of magnitude greater than those generated by the extensor muscles at both the carpus and the MCP joint. For each flexor muscle in the model, the shape of the maximum isometric joint moment-angle curve was dominated by the variation in muscle force. By contrast, the moment-angle curves for the muscles that extend the MCP joint were determined mainly by the variation in muscle moment arms. The suspensory and check ligaments contributed more than half of the total support moment developed about the MCP joint in the model. When combined with appropriate in vivo measurements of joint kinematics and ground-reaction forces, the model may be used to determine muscle-tendon and joint-reaction forces generated during gait.

Animals↗

PubMed2003

Moment arms about the carpal and metacarpophalangeal joints for flexor and extensor muscles in equine forelimbs.

OBJECTIVE: To determine whether muscle moment arms at the carpal and metacarpophalangeal joints can be modeled as fixed-radius pulleys for the range of motion associated with the stance phase of the gait in equine forelimbs. SAMPLE POPULATION: 4 cadaveric forelimbs from 2 healthy Thoroughbreds. PROCEDURE: Thin wire cables were sutured at the musculotendinous junction of 9 forelimb muscles. The cables passed through eyelets at each muscle's origin, wrapped around single-turn potentiometers, and were loaded. Tendon excursions, measured as the changes in lengths of the cables, were recorded during manual rotation of the carpal (180 degrees to 70 degrees) and metacarpophalangeal (220 degrees to 110 degrees) joints. Extension of the metacarpophalangeal joint (180 degrees and 220 degrees) was forced with an independent loading frame. Joint angle was monitored with a calibrated potentiometer. Moment arms were calculated from the slopes of the muscle length versus joint angle curves. RESULTS: At the metacarpophalangeal joint, digital flexor muscle moment arms changed in magnitude by < or = 38% during metacarpophalangeal joint extension. Extensor muscle moment arms at the carpal and metacarpophalangeal joints also varied (< or = 41% at the carpus) over the range of joint motion associated with the stance phase of the gait. CONCLUSIONS AND CLINICAL RELEVANCE: Our findings suggest that, apart from the carpal flexor muscles, muscle moment arms in equine forelimbs cannot be modeled as fixed-radius pulleys. Assuming that muscle moment arms at the carpal and metacarpophalangeal joints have constant magnitudes may lead to erroneous estimates of muscle forces in equine forelimbs.

Animals↗

PubMed2002

Pedal trajectory alters maximal single-leg cycling power.

PURPOSE: Muscular power produced during in vitro cyclic contraction has been reported to vary with muscle-length trajectory. The purpose of this study was to determine whether maximal human single-leg cycling power could be similarly altered by manipulating pedal trajectory. METHOD: Seven trained cyclists performed maximal single-leg cycle ergometry. Pedal trajectory was manipulated by repositioning the ergometer drive sprocket off-center with respect to the crank axle, such that the leg-extension phase occupied 42, 50, or 58% of the cycle time (LEP42, LEP50, and LEP58, respectively). RESULTS: Maximum instantaneous power was 12% greater for LEP58 (1984 +/- 143 W) than LEP50 (1838 +/- 126 W), which was 8% greater than that for LEP42 (1645 +/- 112 W). Maximum power, averaged over a complete revolution of the crank, was 4% greater for LEP58 (636 +/- 59 W) than for LEP50 (613 +/- 53 W), which was 18% greater than that for LEP42 (520 +/- 43 W). CONCLUSIONS: These findings, paralleling those for an in vitro model, confirmed our hypothesis that maximal single-leg cycling power could be altered by manipulating pedal trajectory. Alterations in power were likely due to concomitant effects of muscle-shortening velocity, muscle excitation, and biomechanical constraints. Additional research is needed to determine whether greater leg-extension phase ratios can elicit further increases in power and whether similar results can be obtained during bilateral cycling.

Adult↗

PubMedDate not supplied

Both-bone forearm osteotomy for supination contracture: a cadaver model.

PURPOSE: To quantify the magnitude of rotational correction possible when comparing a single forearm bone osteotomy and fixation with stepwise osteotomy and fixation of both bones in a cadaver model and to determine if the order in which the stepwise osteotomies are performed influences the amount of correction. METHODS: Ten fresh-frozen cadaveric forearms were fixed to a frame positioned in the field of view of a motion-capture system. An experimental supination contracture was induced in full supination. Cadaver forearms were assigned randomly to group I (ulna osteotomy, rotation, plating) or group II (radius osteotomy, rotation, plating). Cadavers in group I were used later in group III (ulna + radius) by completing a radial osteotomy, rotation, and fixation in the forearms with the plated ulna. Similarly the specimens assigned to group II were used later in group IV (radius + ulna) by completing an ulna osteotomy, rotation, and fixation in the forearms with the plated radiuses. Measurements of forearm pronation were made after single-bone (groups I, II) and stepwise both-bone (groups III, IV) rotational osteotomies. RESULTS: Stepwise rotational osteotomy and fixation of the ulna followed by the radius produced significantly more corrective pronation (101 degrees) than rotating the radius followed by the ulna (65 degrees). Rotating the radius gave only moderate correction (58 degrees) and minimal correction was produced by ulna osteotomy alone (15 degrees). CONCLUSIONS: Rotational osteotomy of both forearm bones can create approximately 100 degrees of correction when performed at the proximal ulna followed by the distal radius. If less rotation is needed then the distal radius osteotomy alone can provide approximately 60 degrees of correction.

Biomechanical Phenomena↗