PubMed Health⌕ Search

Biomedical subjects

Nicola Pinna

Publications and source records attributed to Nicola Pinna.

15 recordsLinked to original sources
PubMed2006

Optical properties of lanthanide-doped lamellar nanohybrids.

In this article a detailed study of the optical properties of lanthanide doped lamellar nanohybrids synthesized by the "benzyl alcohol route" is presented. The synthetic approach results in the formation of a highly ordered lamellar nanocomposite consisting of yttrium or gadolinium oxide crystalline layers with a confined thickness of about 0.6 nm, separated from each other by organic layers of intercalated benzoate molecules. When the inorganic layers are doped with optically-active lanthanide ions they show outstanding emission properties in the green (Tb(3+)), red (Eu(3+)) and near infrared (Nd(3+)). The local environment of the emitting ions and the energy transfer processes involving the phenyl ring of the benzoate complexes and the lanthanide ions are presented, as well as radiance and lifetime measurements. The radiance values are comparable and in some cases even larger than those of standard phosphors, proving that these nanohybrids can compete, from an emission efficiency point of view, with commercial phosphors. Furthermore, in these nanohybrids it is possible by simply changing the excitation wavelength, to tune the emission colour chromaticity without loosing the radiance.

Journal Article↗
PubMed2005

Growth and assembly of crystalline tungsten oxide nanostructures assisted by bioligation.

Here, we present a systematic study on the influence of the bioligand deferoxamine mesylate on the crystallization and assembly behavior of tungsten oxide in a soft-chemistry process. Without deferoxamine mesylate, this approach yields pseudo-single crystalline tungstite nanoplatelets consisting of a large number of crystallographically almost perfectly aligned primary crystallites. In the presence of a constant amount of deferoxamine, the particle morphology drastically changes with temperature, ranging from wormlike organic-inorganic hybrid nanostructures to single-crystalline tungsten oxide nanowires, highlighting the role of the bioligand in controlling the crystal growth and assembly behavior. The nanowires have a uniform diameter of about 1.3 nm, an aspect ratio of more than 500, and the structural flexibility of tungsten oxide. The presented process is based on the combination of biomimetic construction principles with nonaqueous sol-gel chemistry, thus combining the advantages of both tools, excellent control over particle morphology and high crystallinity at low temperature.

Journal Article↗
PubMed2005

Single crystal manganese oxide multipods by oriented attachment.

Nonhydrolytic sol-gel processes in organic solvents have become very popular for the synthesis of metal oxide NCs. We report an affordable, high-yield, shape-control synthesis of MnO multipod nanocrystals with a quick reaction time. The reaction yields exclusively multipods; two to six pod nanocrystals are synthesized. The mechanism leading to this hierarchical nanostructure is studied in relation with an oriented attachment mechanism; all nanocrystals are found to be single crystals. The study is completed by high-resolution TEM, X-ray powder diffraction, and magnetic measurements.

Journal Article↗
PubMed2005

Amorphous layer around aragonite platelets in nacre.

We reveal that the aragonite CaCO3 platelets in nacre of Haliotis laevigata are covered with a continuous layer of disordered amorphous CaCO3 and that there is no protein interaction with this layer. This finding contradicts classical paradigms of biomineralization, e.g., an epitaxial match between the structural organic matrix and the formed mineral. This finding also highlights the role of physicochemical effects in morphogenesis, complementing the previously assumed total control by biomolecules and bioprocesses, with many implications in nanotechnology and materials science.

Animals↗
PubMed2005

Ligand functionality as a versatile tool to control the assembly behavior of preformed titania nanocrystals.

Nanoparticle powders composed of surface-functionalized anatase crystals with diameters of about 3 nm self-organize into different structures upon redispersion in water. The assembly is directed by a small amount of a low-molecular-weight functional ligand (the "assembler") adsorbed on the surface of the nanoparticles. The ligand functionality determines the anisotropy of the resulting structures. Multidentate ligands, such as trizma ((HOCH(2))(3)CNH(2)) and serinol ((HOCH(2))(2)CNH(2)), with a chargeable terminal group preferentially induce the formation of anisotropic nanostructures several hundreds of nanometers in total length, whereas all the other investigated ligands (ethanolamine H(2)N(CH(2))(2)OH, glycine hydroxamate H(2)NCH(2)CONHOH, dopamine (OH)(2)C(6)H(3)(CH(2))(2)NH(3)Cl, tris (HOCH(2))(3)CCH(3)) mainly lead to uncontrolled agglomeration. Experimental data suggests that the anisotropic assembly is a consequence of the water-promoted desorption of the organic ligands from the {001} faces of the crystalline building blocks together with the dissociative adsorption of water on these crystal faces. Both processes induce the preferred attachment of the titania nanoparticles along the [001] direction. The use of polydentate and charged ligands to functionalize the surface of nanoparticles thus provides a versatile tool to control their arrangement on the nanoscale.

Adsorption↗
PubMed2005

Polymer-induced alignment of DL-alanine nanocrystals to crystalline mesostructures.

Crystallization of DL-alanine by cooling of a supersaturated solution in the presence of a chiral double-hydrophilic block copolymer poly(ethylene glycol)-block-poly(ethylene imine)-S-isobutyric acid (PEG4700-PEI1200-S-iBAc) yields crystal superstructures with an astonishing morphology. Although analysis by light microscopy reveals these crystals to be apparently well facetted, electron microscopy shows that they consist of three-dimensionally, well-aligned nanocrystals that are scaffolded to a so-called mesocrystal. This mesocrystal is formed by polymer-mediated structuration, and provides evidence for the importance of mesoscopic events in a typical crystallization process.

Journal Article↗
PubMed2005

A general nonaqueous route to binary metal oxide nanocrystals involving a C-C bond cleavage.

A widely applicable solvothermal route to nanocrystalline iron, indium, gallium, and zinc oxide based on the reaction between the corresponding metal acetylacetonate as metal oxide precursor and benzylamine as solvent and reactant is presented. Detailed XRD, TEM, and Raman studies prove that, with the exception of the iron oxide system, where a mixture of the two phases magnetite and maghemite is formed, only phase pure materials are obtained, gamma-Ga(2)O(3), zincite ZnO, and cubic In(2)O(3). The particle sizes lie in the range of 15-20 nm for the iron, 10-15 nm for the indium, 2.5-3.5 nm for gallium, and around 20 nm for zinc oxide. GC-MS analysis of the final reaction solution after removal of the nanoparticles showed that the composition is rather complex consisting of more than eight different organic compounds. Based on the fact that N-isopropylidenebenzylamine, 4-benzylamino-3-penten-2-one, and N-benzylacetamide were the main species found, we propose a detailed formation mechanism encompassing solvolysis of the acetylacetonate ligand, involving C-C bond cleavage, as well as ketimine and aldol-like condensation steps.

Journal Article↗
PubMed2005

Synthesis of yttria-based crystalline and lamellar nanostructures and their formation mechanism.

A nonaqueous synthetic route for the preparation of a regular crystalline yttria mesostructure is presented. The reaction between yttrium alkoxides and benzyl alcohol results in the formation of a highly ordered lamellar nanocomposite consisting of yttria layers with a confined thickness of about 0.6 nm, separated from each other by organic layers of intercalated benzoate molecules. Doping with europium leads to strong red luminescence. The nanostructure formation proceeds via two reactions. A C--C bond formation occurs between benzyl alcohol and the isopropanolate ligand. At the same time, yttrium oxide catalyzes two low-temperature hydride-transfer reactions to form benzoic acid and toluene from benzyl alcohol via benzaldehyde, thus limiting the growth of the thickness of the lamellae.

Alcohols↗
PubMed2004

Periodically ordered nanoscale islands and mesoporous films composed of nanocrystalline multimetallic oxides.

Innovative strategies to produce well-defined nanoparticles and other nanostructures such as nanofibres, quantum wells and mesoporous materials have revitalized materials science for the potential benefit to society. Here, we report a controlled process, involving soft-chemistry-based deposition, template-assisted mesostructured growth, and tuned annealing conditions that allows the preparation of ordered mesoporous crystalline networks and mesostructured nano-island single layers, composed of multicationic metal oxides having perovskite, tetragonal or ilmenite structures. This strategy to obtain meso-organized multi-metal-oxide nanocrystalline films (M(3)NF) bridges the gap between conventional mesoporous materials and the remarkable properties of crystalline ternary or quaternary metallic oxides. Nanocrystalline mesoporous films with controlled wall thickness (10-20 nm) of dielectric SrTiO(3), photoactive MgTa(2)O(6) or ferromagnetic semi-conducting Co(x)Ti(1-x)O(2-x) were prepared by evaporation-induced self-assembly (EISA) using a specially designed non-ionic block-copolymer template. A tuned thermal treatment of the mesoporous films permits the transfer of the wall structure into nanocrystallites, with all tectonic units being tightly incorporated into mechanically stable ordered tri- or bidimensional nanocrystalline networks. This methodology should allow multifunctionalization, miniaturization and integration during development of devices such as smart sensors and actuators, better-performing photocatalysts, and fast electrochromic devices. On the other hand, organized arrays of dispersed ferromagnetic or ferroelectric nanoparticles are promising materials for spintronics and for cheap, non-volatile 'flash' memories.

Crystallization↗
PubMed2004

Nonaqueous and halide-free route to crystalline BaTiO3, SrTiO3, and (Ba,Sr)TiO3 nanoparticles via a mechanism involving C-C bond formation.

A novel nonaqueous route for the preparation of nanocrystalline BaTiO(3), SrTiO(3), and (Ba,Sr)TiO(3) has been developed. In a simple one-pot reaction process, the elemental alkaline earth metals are directly dissolved in benzyl alcohol at slightly elevated temperatures. After the addition of Ti(O(i)Pr)(4), the reaction mixture is heated to 200 degrees C, resulting in the formation of a white precipitate. XRD measurements prove the exclusive presence of the perovskite phase without any other crystalline byproducts such as BaCO(3) or TiO(2). TEM investigations reveal that the BaTiO(3) nanoparticles are nearly spherical in shape with diameters ranging from 4 to 5 nm. The SrTiO(3) particles display less uniform particle shapes, and the size varies between 5 and 10 nm. Lattice fringes observed in HRTEM measurements further prove the high crystallinity of the nanoparticles. Surprisingly, GC-MS analysis of the reaction solution after hydrothermal treatment shows that hardly any ether formation occurs during the BaTiO(3) synthesis. Instead, the presence of 4-phenyl-2-butanol in stoichiometric amounts gives evidence that the formation mechanism proceeds mainly via a novel pathway involving C-C bond formation between benzyl alcohol and the isopropanolate ligand.

Journal Article↗