PubMed Health⌕ Search

Biomedical subjects

Norbert P Haas

Publications and source records attributed to Norbert P Haas.

At least 19 recordsLinked to original sources
PubMed2006

Mechanical concepts for disc regeneration.

Different strategies exist to treat intervertebral disc degeneration. Biological attempts to regenerate the disc are promising. However, degeneration of the disc is always accompanied by alterations of disc height, intradiscal pressure, load distribution, and motion patterns, respectively. Since those preconditions are independent factors for disc degeneration, it is unlikely that regeneration may occur without firstly restoring the physiological status of the affected spinal segment. In vitro and in vivo animal studies demonstrate that disc distraction normalizes intradiscal height and pressure. Furthermore, histological and radiological examinations provided some evidence for regenerative processes in the disc. Only dynamic stabilization systems currently offer the potential of a mechanical approach to intervertebral disc regeneration. Dynamic stabilization systems either using pedicle screws or with an interspinous device, demonstrate restabilization of spinal segments and reduction of intradiscal pressure. Clinical reports of patients with degenerative disc disease who underwent dynamic stabilization are promising. However, there is no evidence that those implants will lead to disc regeneration. Future treatment concepts should combine intradiscal cell based therapy together with dynamic restoration of the affected spinal segment.

Biomechanical Phenomena↗
PubMed2006

Prophylaxis and treatment of implant-related infections by antibiotic-coated implants: a review.

Implant-related infection is a feared complication in orthopedic and trauma surgery with tremendous consequences for the patient. To reduce this risk, administration of perioperative antibiotic prophylaxis is a routine procedure in orthopedic surgery. A local delivery system for antibiotics based on a polymer implant coating has been developed to optimize the prophylaxis. In an animal experiment, the efficacy of local prophylaxis of gentamicin was compared to a systemic single shot of gentamicin and to a combination of both administrations. The medullary cavities of rat tibiae were contaminated with Staphylococcus aureus and titanium K-wires were implanted into the medullary canals. For local antibiotic therapy, the implants were coated with poly(D,L-Lactide) (PDLLA) loaded with gentamicin. All the animals not treated with local and systemic application of the antibiotic developed osteomyelitis and all cultures of the implants tested positive for S. aureus. Onset of infection was prevented in 80-90% of animals treated with gentamicin-coated K-wires, with and without systemic prophylaxis. Gentamicin-coated intramedullary tibial nails are CE-certified for Europe and Canada and several patients have already been treated for implant-related infection. Up to now, eight patients with open tibia fractures have been treated with an unreamed tibial nail (UTN) coated with PDLLA and gentamicin. In the 1-year follow up, none of the patients developed an infection. A prospective randomized clinical documentation is currently in progress. So far, the results suggest that a local application of gentamicin from PDLLA-coated implants might support systemic antibiotic prophylaxis in preventing implant-associated osteomyelitis.

Animals↗
PubMed2006

Local cooling restores microcirculatory hemodynamics after closed soft-tissue trauma in rats.

BACKGROUND: Severe closed soft-tissue injury (CSTI) results in progressively developing microvascular dysfunction and local inflammation. Cooling reduces swelling, pain, cellular oxygen demand, and metabolic activity. However, effects of cooling on posttraumatic microcirculation are not yet fully understood. Thus, we assessed effects of local cooling on microcirculation, regional inflammatory response including leukocyte-endothelial cell interaction, and edema formation after CSTI. METHODS: Standardized CSTI was induced by means of controlled impact injury in the left tibial compartment of 14 male Sprague-Dawley rats. Rats were assigned to four groups (n = 7 per group) as follows: group I, no trauma/no cooling; group II, no trauma/20 minutes of cooling; group III, 1.5 hours posttrauma/no cooling; and group IV, 1.5 hours posttrauma/20 minutes of cooling. RESULTS: CSTI resulted in a significant decrease in functional capillary density, a marked increase in microvascular permeability, and granulocyte infiltration (HIS48) as revealed by intravital microscopy and immunohistochemistry of the left extensor digitorum longus muscle. After 20 minutes of local cooling, these microvascular derangements were restored to the level of controls (group I). Edema (extensor digitorum longus muscle wet-to-dry weight ratio) was less pronounced compared with noncooling conditions (group III). Immunoreactivity for HIS48 (neutrophilic granulocytes) in injured rats subjected to local cooling (group IV) was markedly decreased compared with noncooling conditions (group III). CONCLUSION: These results provide in vivo evidence that cooling affords protection of posttraumatic microcirculation through sustained inhibition of microvascular and endothelial dysfunction leading to less granulocyte-dependent inflammation and skeletal muscle edema. Local cooling appears to reduce propagation of acute microvascular injury, preventing leukocyte-dependent tissue destruction and escalation of secondary tissue damage after musculoskeletal soft-tissue trauma.

Animals↗
PubMed2006

Collective review: bioactive implants coated with poly(D,L-lactide) and growth factors IGF-I, TGF-beta1, or BMP-2 for stimulation of fracture healing.

Demographic data reveal that due to the increasing aging of the population, complications with the musculoskeletal system will increase in the next years. One major problem in orthopedic and trauma surgery are the delayed healing or non-unions of long bone fractures. The exogenous application of growth factors can stimulate the bone healing to reduce these complications. Beside the choice of the optimal growth factor the application system is important. Therefore, we developed a new bioactive coating method for implants, which is based on a biodegradable poly(D,L-lactide) (coating thickness: 10 mum). This coating allows the incorporation of growth factors and the controlled release of these factors during the healing process without the need for further devices. The effect of different growth factors (IGF-I, TGF-beta1, and BMP-2) locally released from coated intramedullary implants on fracture healing was investigated with biomechanical and histological analysis in rats. All investigated growth factors stimulated the fracture healing as assessed with biomechanical tests and histological analysis. The local application of combined IGF-I and TGF-beta1 had the most stimulating effect on fracture healing, followed by the effect of BMP-2, IGF-I, and TGF-beta1 alone. Bioactive coating of biomechanical well-established implants can on the one hand stabilize the fracture and on the other hand stimulate healing processes to increase healing and to reduce the rate of complications.

Absorbable Implants↗
PubMed2005

Osteoclastic activity begins early and increases over the course of bone healing.

Osteoclasts are specialised bone-resorbing cells. This particular ability makes osteoclasts irreplaceable for the continual physiological process of bone remodelling as well as for the repair process during bone healing. Whereas the effects of systemic diseases on osteoclasts have been described by many authors, the spatial and temporal distribution of osteoclasts during bone healing seems to be unclear so far. In the present study, healing of a tibial osteotomy under standardised external fixation was examined after 2, 3, 6 and 9 weeks (n = 8) in sheep. The osteoclastic number was counted, the area of mineralised bone tissue was measured histomorphometrically and density of osteoclasts per square millimetre mineralised tissue was calculated. The osteoclastic density in the endosteal region increased, whereas the density in the periosteal region remained relatively constant. The density of osteoclasts within the cortical bone increased slightly over the first 6 weeks, however, there was a more rapid increase between the sixth and ninth weeks. The findings of this study imply that remodelling and resorption take place already in the very early phase of bone healing. The most frequent remodelling process can be found in the periosteal callus, emphasising its role as the main stabiliser. The endosteal space undergoes resorption in order to recanalise the medullary cavity, a process also started in the very early phase of healing at a low level and increasing significantly during healing. The cortical bone adapts in its outward appearance to the surrounding callus structure. This paradoxic loosening is caused by the continually increasing number and density of osteoclasts in the cortical bone ends. This study clearly emphasises the osteoclastic role especially during early bone healing. These cells do not simply resorb bone but participate in a fine adjusted system with the bone-producing osteoblasts in order to maintain and improve the structural strength of bone tissue.

Animals↗
PubMed2005

Hamstring tendon versus patellar tendon anterior cruciate ligament reconstruction using biodegradable interference fit fixation: a prospective matched-group analysis.

BACKGROUND: There are still controversies about graft selection for primary anterior cruciate ligament reconstruction, especially with respect to knee stability and functional outcome. HYPOTHESIS: Biodegradable interference screw fixation of hamstring tendon grafts provides clinical results similar to those achieved with identical fixation of bone-patellar tendon-bone grafts. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: In 1996 and 1997, primary isolated anterior cruciate ligament reconstruction using a bone-patellar tendon-bone autograft was performed in 72 patients. Since 1998, hamstring tendons were used as routine grafts. Matched patients with a hamstring tendon graft were selected from a database (n = 284). All patients were followed prospectively for a minimum of 2 years with KT-1000 arthrometer testing, International Knee Documentation Committee score, and Lysholm score. RESULTS: In the bone-patellar tendon-bone group, 9 patients were excluded because of bilateral rupture of the anterior cruciate ligament, 3 patients (4.2%) had a graft rupture, and 4 patients were lost to follow-up (follow-up rate, 92.1%), leaving 56 patients for a matched-group analysis. In the hamstring tendon database, the graft rupture rate was 5.6% (P = .698). The Lysholm score was 89.7 in the patellar tendon group and 94 in the hamstring tendon group (P = .003). The KT-1000 arthrometer side-to-side difference was 2.6 mm for the patellar tendon group and 2.1 mm for the hamstring tendon group (P = .041). There were significantly less positive pivot-shift test results in the hamstring tendon group (P = .005), and hamstring tendon patients showed lower thigh atrophy (P = .024) and patellofemoral crepitus (P = .003). Overall International Knee Documentation Committee scores were better (P = .001) in the hamstring tendon group (hamstring tendon: 34 x A, 21 x B, 0 x C, 0 x D; bone-patellar tendon-bone: 17 x A, 32 x B, 6 x C, 0 x D). CONCLUSIONS: In this comparison of anterior cruciate ligament reconstruction with bone-patellar tendon-bone and anatomical hamstring tendon grafts, the hamstring tendon graft was superior in knee stability and function. These findings are partially contrary to previous studies and might be attributable to the use of an anatomical joint line fixation for hamstring tendon grafts. Thus, hamstring tendons are the authors' primary graft choice for anterior cruciate ligament reconstruction, even in high-level athletes.

Adolescent↗
PubMed2005

Biomechanical testing of the lumbar facet interference screw.

STUDY DESIGN: An in vitro study was conducted to determine the biomechanical properties of a new simple, percutaneous, posterior fixation technique for the lumbar spine involving a new implant, the so-called Lumbar Facet Interference Screw. OBJECTIVES: The purpose of this study was to compare the biomechanical properties of this new fixation device with translaminar and pedicle screw fixation. SUMMARY OF BACKGROUND DATA: Several techniques were described to perform a minimal invasive posterior stabilization of the lumbar spine after an anterior lumbar interbody fusion procedure. Yet, due to the high complexity of these minimally invasive surgical procedures, currently, hardly any of these percutaneous posterior fixation techniques is carried out routinely. METHODS: Ten human lumbar spines were tested in flexion, extension, axial rotation, and lateral bending using a nonconstrained testing method. First, all motion segments were evaluated intact (group 1). After complete discectomy of L4-L5, the following stabilization techniques were tested sequentially (n = 10/group): group 2: "stand-alone" cage; group 3: cage plus translaminar screws; group 4: cage plus Lumbar Facet Interference Screw; and group 5: cage plus pedicle screws. Stiffness, ranges of motion, and neutral and elastic zones were determined. RESULTS: In comparison to the intact motion segment, the "stand-alone" cage showed a significantly higher (P < 0.05) range of motion, neutral zone, and elastic zone and a significantly lower (P < 0.05) stiffness in extension and rotation. Generally, all fixation techniques using cages plus posterior stabilization decreased range of motion, neutral zone, and elastic zone and increased stiffness in comparison to the "stand-alone" cage group. There was no significant difference between the cage plus interference screw and the cage plus translaminar screw group in all test modes. In comparison to the 2 facet joint stabilization techniques, pedicle screw stabilization decreased (P < 0.01) range of motion, neutral zone, and elastic zone and increased (P < 0.01) stiffness significantly in flexion and rotation. CONCLUSIONS: Results of this study indicate that the new Lumbar Facet Interference Screw fixation yields initial biomechanical stability similar to translaminar screw fixation, yet inferior biomechanical stability compared to pedicle screw fixation. Although these results are encouraging, additional biomechanical studies including cyclic loading tests have to evaluate the mid- and long-term stabilization capacity of this new minimally invasive fixation technique before human application.

Adult↗
PubMed2005

Short term in vivo biocompatibility testing of biodegradable poly(D,L-lactide)--growth factor coating for orthopaedic implants.

Fracture healing can be stimulated by exogenous application of growth factors. Using porcine and rat models the efficacy of locally delivered IGF-I and TGF-beta1 from an implant coating has been demonstrated. A thin and biomechanical stable biodegradable poly(D,L-lactide) was used to coat implants and serve as a drug carrier. Due to reports of possible foreign body reactions caused by polymer materials in orthopedic surgery, this study investigated the biocompatibility of the polylactide implant coating and the locally released growth factors during the time course of rat tibial fracture healing (days 5, 10, 15, and 28 after fracture). Monocytes/macrophages and osteoclast were detected using an monoclonal antibody against ED1 (comparable to CD68 in mice and human). The antibody ED1 stains monocytes, macrophages and osteoclast in the bone marrow and in the newly formed fracture callus. A moderate density of the monocytes/macrophages was seen in the proximal part of the medullary canal, but almost no cells were detectable in the region distal to the fracture. The amount of stained cells increased during the observation time with a maximum at days 10 and 15 followed by a decrease at day 28. No differences were detectable between the investigated groups from day 5 to 15 post fracture indicating, that the used poly(D,L-lactide) or the incorporated growth factors do not evoke an elevated immunological response compared to the uncoated titanium implant at the investigated time points. A significantly higher amount of ED1 positive cells was measured 28 days after fracture in the control group compared to the groups with the coated implants. In conclusion, no indication of a foreign body reaction due to the use of the polylactide or the growth factors was found indicating a good short-term biocompatibility of this bioactive coating.

Absorbable Implants↗
PubMed2005

Treatment of traumatic cervical spine instability with interbody fusion cages: a prospective controlled study with a 2-year follow-up.

INTRODUCTION: The purpose of this prospective cohort study was to define indications and analyze the clinical and radiographic results of using interbody cages to surgically treat traumatic cervical spine instability. PATIENTS AND METHODS: 53 patients were treated by monosegmental anterior discectomy and interbody fusion using either autologous tricortical iliac crest bone graft and CSLP (cervical spine locking plate) (bone graft group, n=26) or Syncage-C filled with autologous cancellous bone grafts and CSLP (cage group n=27). Indications for surgery were traumatic cervical spine instability classified according to the AO classification as B1, B2, B3, C2, or C3. Intraoperative parameters such as blood loss and operation time were assessed. Prior to surgery and at follow-up (6,12, and 24 months), evaluation included measurement of neck pain, shoulder/arm pain, muscle strength, Neck Pain Disability Index (NPDI), and Cervical Spine Functional Score (CSFS). Neurological and overall outcome was assessed using the ASIA impairment scale and Odom's criteria, respectively. In addition, radiographic evaluation, including plain x-rays, flexion-extension views, and CT scans was performed. Fusion, segmental mobility, segmental lordosis/kyphosis and disc space height were determined. RESULTS: Operation time and hospital stay were significantly shorter (p<0.05) in the cage group than in the bone graft group. After 6,12, and 24 months there was no difference between either group in pain, muscle strength, NPDI, CSFS, neurological and overall outcome. Although the cage group showed a trend for prolonged fusion process, there was no statistically significant difference between the groups for all radiographic parameters. CONCLUSION: Under strict indications, cages offer a valid alternative to a tricortical iliac crest bone graft in the surgical treatment of monosegmental traumatic cervical spine instability. Although there was no significant difference between the cage and the bone graft group in the functional and radiographic outcome, less donor site morbidity, a shorter operating time, and a reduced hospital stay might result in cost-effectiveness of cages.

Adolescent↗
PubMed2005

Posterior stabilization of subaxial cervical spine trauma: indications and techniques.

The use of instrumentation for stabilization following cervical trauma has evolved rapidly in the past few decades. Nonoperative maneuvers, including traction, extended bed rest, and cast immobilization, have given way to wiring or screw rod constructs that allow immediate fixation and early mobilization of the patient. These procedures can be performed soon after trauma and with a minimum of surgical risk. They offer immediate stability of the injured spine, and can prevent the sequelae of acute cervical spinal cord injury that may accompany prolonged bed rest, thus allowing early rehabilitation and the potential for improved recovery. Current techniques for posterior cervical spine stabilization following trauma include spinous process or facet wiring [1-9], lateral mass plating [10-18], and cervical pedicle screws [19-27]. Several radiological tools, including MRI [28] and reformatted CT, yield precise details of the injured spine and allow the treating physician to determine which, if any, fixation technique offers the best chance of recovery with the least amount of risk. The goals of surgery following acute cervical spine injury include decompressing the injured spinal cord or nerve root, maintaining alignment, providing stability to the spine, promoting healing and fusion, and allowing early mobilization. This article will review indications for posterior cervical spine surgery, as well as the techniques that are currently available to help achieve the above-noted goals. We also report a recent retrospective review of 5-year data in treating posterior cervical trauma with lateral mass and pedicle screw fixation.

Adolescent↗
PubMed2005

Acute effects of N-acetylcysteine on skeletal muscle microcirculation following closed soft tissue trauma in rats.

Trauma-induced microcirculatory dysfunction, formation of free radicals and decreased endothelial release of nitric oxide (NO) contribute to evolving tissue damage following skeletal muscle injury. Administration of N-acetylcysteine (NAC) known to scavenge free radicals and generate NO is considered a valuable therapeutic approach. Thus, the objective of this study was to quantitatively analyze the acute effects of NAC on skeletal muscle microcirculation and leukocyte-endothelial cell interaction following severe standardized closed soft tissue injury (CSTI). Severe CSTI was induced in the hindlimbs of 14 male anesthetized Sprague-Dawley rats using the controlled impact injury technique. Rats were randomly assigned (n = 7) to high-dose intravenous infusion of NAC (400 mg/kg body weight) or isovolemic normal saline (NS). Non-injured, sham-operated animals (n = 7) were subjected to the same surgical procedures but did not receive any additional fluid. Creatin kinase (CK) activity was assessed at baseline, 1 h before and 2 h following posttraumatic NAC or NS infusion. Microcirculation of the extensor digitorum longus (EDL) muscle was analyzed using intravital microscopy and Laser-Doppler flowmetry (LDF). Edema index (EI) was calculated by measuring the EDL wet-to-dry weight ratio (EI=injured/contralateral limb). EDL-muscles were analyzed for desmin immunoreactivity and granulocyte infiltration. Microvascular deteriorations observed following NS-infusion were effectively reversed by NAC: Functional capillary density was restored to levels found in sham-operated animals and leukocyte adherence was significantly (p < 0.05) reduced compared to the NS group. NAC significantly (p < 0.05) increased erythrocyte flux determined by Laser-Doppler flowmetry. Posttraumatic serum CK levels and EI were significantly (p < 0.05) decreased by NAC. During the posttraumatic acute phase, single infusion of NAC markedly reduced posttraumatic microvascular dysfunction, attenuated both leukocyte adherence and tissue infiltration. NAC also decreased CSTI-induced edema formation and myonecrosis as reflected by attenuated serum CK levels and attenuated loss of desmin immunoreactivity. NAC may serve as an effective therapeutic strategy by supporting microvascular blood supply and tissue viability in the early posttraumatic period. Additional studies aimed at long-term analysis and investigation of injury severity--or dosage dependency are needed.

Acetylcysteine↗
PubMed2005

Surgical approach influences periprosthetic femoral bone density.

Our hypothesis was that the bone mineral density of the proximal femur is altered significantly by surgical approach. The change in long-term periprosthetic bone mineral density in relation to the alteration of the musculature after the anterolateral (Group A) and transgluteal approaches (Group B) has been compared. There were 35 hips (30 patients) in Group A and 47 hips (37 patients) in Group B. No significant differences were seen between groups with respect to age, gender, diaphyseal bone mineral density distribution, or average stem size in a Wilcoxon-Mann-Whitney test. Measurement of bone mineral density in femoral Gruen zones revealed a significant bone loss in Group B compared with Group A in the multivariate analysis, which was confirmed by univariate post hoc tests in Zones I, II, VI, and VII (multiple significance according to Bonferroni-Holm's procedure). The functional outcome, however, showed no significant differences between the two groups postoperatively. A potential reason for the bone mineral density shift might have been a redistribution of the musculoskeletal loading across the hip after a transgluteal, compared with an anterolateral, surgical approach. A difference in the muscular damage caused by the two surgical approaches seems to have a significant influence on the long-term bone loss.

Adult↗
PubMed2004

Bioabsorbable interbody cages in a sheep cervical spine fusion model.

STUDY DESIGN: An experimental study using a sheep cervical spine interbody fusion model. OBJECTIVES: To compare interbody fusion of an autologous tricortical iliac crest bone graft with two bioabsorbable cages and to determine whether there are differences between the three interbody fusion techniques in 1) the ability to preserve postoperative distraction, 2) the biomechanical stability, and 3) the histologic characteristics of intervertebral bone matrix formation. SUMMARY AND BACKGROUND DATA: Bioabsorbable cages would be beneficial compared with metallic cages; however, currently no suitable bioabsorbable interbody fusion cage is available. METHOD: Twenty-four sheep underwent C3/C4 discectomy and fusion. The following stabilization techniques were used: Group 1) autologous tricortical iliac crest bone graft (n = 8); Group 2) bioabsorbable cage made of 70/30 poly(l-lactide-co-d,l-lactide) (experimental) filled with autologous cancellous bone graft (n = 8); Group 3) bioabsorbable cage made of a polymer-calciumphosphate composite (Biomet Europe, Dordrecht, The Netherlands) filled with autologous cancellous bone graft (n = 8). Radiographic scans to determine disc space height were performed before and after surgery and after 1, 2, 4, 8, and 12 weeks, respectively. After 12 weeks, animals were killed, and fusion sites were evaluated using functional radiographic views in flexion and extension. Quantitative computed tomographic scans were used to assess bone mineral density, bone mineral content, and bony callus volume. Biomechanical testing was performed in flexion, extension, axial rotation, and lateral bending to determine stiffness, ROM, and neutral and elastic zone. Histomorphological and histomorphometrical analysis were performed to evaluate fusion and foreign body reactions associated with the bioabsorbable cages. RESULTS: Over a 12-week period, the polymer-calciumphosphate composite cage showed significantly higher values for disc space height compared with the bone graft and the poly(l-lactide-co-d,l-lactide) cage. Additionally, the polymer-calciumphosphate composite cage demonstrated a significantly higher stiffness and lower ROM, neutral zone, and elastic zone in axial rotation and lateral bending than any other group. However, quantitative computed tomographic scans demonstrated cracks in six of the eight polymer-calciumphosphate composite cages after 12 weeks. Histologically, the highest bone volume/total volume ratio and the highest fusion rate were found in the polymer-calciumphosphate composite cage group. Although the poly(l-lactide-co-d,l-lactide) cage showed grade I through III foreign body reactions in all fusion areas, only two animals developed grade I foreign body reactions with the polymer-calciumphosphate composite cage. CONCLUSION: After 12 weeks, there was no significant difference between the bioabsorbable poly(l-lactide-co-d,l-lactide) cage and the tricortical bone graft. In comparison to the tricortical bone graft, the bioabsorbable polymer-calciumphosphate composite cage showed significantly better distractive properties, a significantly higher biomechanical stiffness, and an advanced interbody fusion; however, six of eight polymer-calciumphosphate composite cages cracked. Although the fate of the foreign body reactions and the cracks is currently unclear for both bioabsorbable cages, the early appearance of large osteolysis associated with use of the poly(l-lactide-co-d,l-lactide) cage allows skepticism regarding the value of this bioabsorbable implant.

Absorbable Implants↗
PubMed2004

Biomechanical comparison of bioabsorbable cervical spine interbody fusion cages.

STUDY DESIGN: In vitro biomechanical study of bioabsorbable cervical spine interbody fusion cages using a sheep model. OBJECTIVES: The purpose of this study was to evaluate the segmental stability provided by 2 new developed bioabsorbable cervical spine interbody fusion cages and to compare it with a tricortical iliac crest bone graft and a titanium meshed interbody fusion cage. Further, the biomechanical effect of an additional anterior plate instrumentation was determined. SUMMARY AND BACKGROUND DATA: Despite the initial favorable results, the long-term effects of metallic cage devices on spinal motion segments are still unknown. Furthermore, shortcomings of metallic cages like migration, adjacent level degeneration, stenotic myelopathy, and artifacts in postoperative radiologic assessment have already been reported. Bioabsorbable cages have been designed to avoid these complications. Currently, no information is available about the biomechanical properties of bioabsorbable cervical spine interbody fusion cages. METHODS: Forty sheep cervical spines (C2-C5) were tested in flexion, extension, axial rotation, and lateral bending with a nondestructive stiffness method using a nonconstrained testing apparatus. First, the motion segment C3-C4 was tested intact. After complete discectomy, the following groups were evaluated: autologous iliac crest bone graft, titanium mesh cylinder (Harms, DePuy AcroMed), bioabsorbable PDLLA-cage (experimental), and bioabsorbable Resorbon cage (Biomet Merck). Further, all implants were tested with an additional anterior plate instrumentation. The mean apparent stiffness, range of motion, neutral zone, and elastic zone were calculated from the corresponding load-displacement curves. RESULTS: No significant difference in range of motion and segmental stiffness among the tricortical iliac crest bone graft, meshed titanium Harms cage, and PDLLA-cage could be determined. The Resorbon cage significantly (P < 0.05) decreased range of motion and increased stiffness in rotation and flexion in comparisonto all tested implants and the intact motion segment. An additional anterior plate significantly (P < 0.05) decreased range of motion and increased stiffness in flexion and extension. CONCLUSION: In this study, bioabsorbable cages demonstrated biomechanical in vitro properties equal or superior to metallic cages. From the biomechanical point of view, bioabsorbable cages, especially the Resorbon cage, may be a viable alternative to current metallic interbody cage devices. However, animal experimental in vivo evaluation of bioabsorbable cervical spine interbody fusion cages still has to be performed.

Absorbable Implants↗
PubMed2004

Biomechanical comparison of expandable cages for vertebral body replacement in the thoracolumbar spine.

STUDY DESIGN: An in vitro biomechanical study of expandable cages for vertebral body replacement in the human thoracolumbar spine. OBJECTIVES: The purpose of this study was to compare the in vitro biomechanical properties of 3 different expandable cages with a nonexpandable cage. SUMMARY AND BACKGROUND DATA: Recently, there has been a rapid increase in the use and the commercial availability of expandable cages for vertebral body replacement in the thoracolumbar spine. Although all 3 expandable cages, evaluated in this study, are approved for clinical use in Europe, little information is available concerning the biomechanical properties of these implants. MATERIAL AND METHODS: Thirty-two human thoracolumbar spines (T11 to L3) were tested in flexion, extension, axial rotation, and lateral bending with a nondestructive loading technique using an unconstrained testing apparatus. Three-dimensional displacement was measured using an optical measurement system. First, all motion segments were tested intact. After complete corporectomy of L1, cages were implanted according to producer's information. The following implants (n = 8/group) were tested: 1) meshed titanium cage (nonexpandable cage, DePuy AcroMed); 2) X-tenz (expandable cage, DePuy AcroMed); 3) Synex (expandable Cage; Synthes); and 4) VBR (expandable cage, Ulrich). Finally, posterior stabilization using the Universal Spine System (Synthes), posterior-anterior stabilization using the Universal Spine System (Synthes), and anterior plating (Locking Compression Plate, Synthes) was applied to each test specimen. The mean apparent stiffness values, range of motion, and neutral and elastic zone were calculated from the corresponding load-displacement curves. RESULTS: No significant differences could be determined between the in vitro biomechanical properties of expandable and nonexpandable cages. In comparison to the intact motion segment, isolated anterior stabilization using cages and anterior plating significantly decreased stiffness and increased range of motion in all directions. In contrast, additional posterior stabilization significantly increased stiffness and decreased range of motion in all directions compared to the intact motion segment. The combined anterior-posterior stabilization demonstrated greatest stiffness results. CONCLUSION: Biomechanical results indicate that design variations of expandable cages for vertebral body replacement are of little importance. Additionally, no significant difference could be determined between the biomechanical properties of expandable and nonexpandable cages. After corporectomy, isolated implantation of expandable cages plus anterior plating was not able to restore normal stability of the motion segment. Therefore, isolated anterior stabilization using cages plus Locking Compression Plate should not be used for vertebral body replacement in the thoracolumbar spine.

Biomechanical Phenomena↗
PubMed2004

Distribution of bone mineral density with age and gender in the proximal tibia.

OBJECTIVE: To investigate both the age and gender related distributions of bone mineral density in the proximal tibia, specifically in aged patients. BACKGROUND: For surgeons to achieve stable long-term fixation of implants in the proximal tibia, the distribution of bone mineral density must first be known. The changes that occur due to age or gender can alter these distributions. METHODS: Quantitative computed tomography and indentation testing were used to investigate 40 human tibiae (27 female, 13 male, average age 63.3 years). RESULTS: A significant reduction in bone mineral density was found in female tibiae between the age groups of < 60 and > or =60. This difference was not found in the male groups and no other significant difference was found between consecutive age groups. A three-dimensional map of the bone mineral density of the proximal tibia is therefore presented for the groups female < 60, female > or =60 and male. Reduced bone mineral density was consistently found in the central regions, whilst the regions of highest bone quality varied from postero-lateral to postero-medial. CONCLUSIONS: Implant fixation for fracture treatment as well as joint replacement of the proximal tibia are now able to take the regions of both high and low bone mineral density into consideration in older patients and those suffering from osteoporosis. RELEVANCE: Knowledge regarding the regional distribution of bone mineral density in the proximal tibia is necessary in order to achieve stable primary and long-term fixation of implants. This manuscript documents the bone mineral density changes that occur with age and gender.

Absorptiometry, Photon↗
PubMed2004

Long-term effects of local growth factor (IGF-I and TGF-beta 1) treatment on fracture healing. A safety study for using growth factors.

Previous studies showed that growth factors dramatically stimulate healing processes in bone. However, the long-term effect of locally applied growth factors on fracture healing remains unclear. In considering the safety of using growth factors, it is necessary to elucidate that after initial stimulation, the effect stops and the result is a normally healed tissue. Therefore, the purpose of the present study was to investigate the long-term time course of healing processes during growth factor (GF) stimulated and unstimulated fracture healing in a closed tibial fracture model in rats. A well established local drug delivery system was used. IGF-I (50 microg) and TGF-beta 1 (10 microg) were locally applied using a 10 microm thin polylactide (PDLLA) coating on intramedullary implants. The biomechanical and histomorphometrical results demonstrated a significant stimulation of the fracture healing due to the locally applied growth factors compared to control at days 28 and 42 in agreement with the literature. At the last time point, 84 days after fracture, no differences were measurable in the biomechanical testing and the callus composition between the groups. The callus was consistently in the late phase of remodeling with no remaining cartilage. In conclusion, local growth factor application enhances the healing in the early phase without alteration of the normal healing process.

Animals↗