Biomedical subjects

Noriyuki Kitai

Publications and source records attributed to Noriyuki Kitai.

13 recordsLinked to original sources

PubMed2006

Dual segmental distraction osteogenesis of the midface in a patient with Apert syndrome.

OBJECTIVE: To present orthodontic treatment combined with dual segmental distraction osteogenesis in a patient with Apert syndrome. PATIENT: A 15-year-old boy exhibited severe midfacial hypoplasia with retruded and hypoplastic maxilla and anterior open bite. The patient was treated with a rigid external distraction II system for distraction osteogenesis, a preadjusted edgewise appliance, and a modified maxillary protraction headgear. The concave profile with midfacial hypoplasia was improved. A tight occlusal relationship between maxillary and mandibular teeth was achieved. Postoperative treatment results have been stable for 1 year.

Acrocephalosyndactylia↗

PubMed2005

Treatment of severe temporomandibular joint clicking with botulinum toxin in the lateral pterygoid muscle in two cases of anterior disc displacement.

A novel treatment procedure is introduced for severe clicking of the temporomandibular joint (TMJ) associated with anterior disc displacement (ADD), using injections with botulinum toxin (BTX-A) in the lateral pterygoid muscle (LP). It has been suggested that ADD may be caused, precipitated, or maintained by LP activity, but the role of the LP in the dynamics of the TMJ clicking is uncertain. The case report includes 2 women, followed with clinical examinations, TMJ imaging, and electromyography (EMG), in whom local anesthetics in the LP could abolish the clicking for several days. BTX-A block of the LP (30 U Botox, given twice under EMG guidance with 6-month interval) temporarily reduced the action of the muscle, but the clicking was permanently eliminated and did not return during the observation period of 1 year, and a small but distinctive positional improvement in the disc-condyle relationship was obtained. However, the precise mechanisms behind the favourable treatment outcome are unclear.

Adult↗

PubMed2004

Three-dimensional reconstruction of TMJ MR images: a technical note and case report.

MR images of the temporomandibular joint at occlusion and at various stages of mouth opening were registered and reconstructed three-dimensionally before and after a modified condylotomy in a patient with painful disk displacement. Following the condylotomy, the condyle/disk relationship had become normalized in all three planes of space at closed mouth and during mouth opening. The post-operative distances of the condylar and diskal paths had increased when compared with the preoperative distances. The three-dimensional visualizing method may, besides providing diagnostic advantages, be a valuable tool for qualitative and quantitative documentation of the efficiency of different treatment methods for normalization of the disk/condyle relationship in patients with TMJ disk displacement.

Adult↗

PubMed2004

Evaluation of temporomandibular joint in patients with hemifacial microsomia.

OBJECTIVE: The purpose of this study was to elucidate positional relationships between temporomandibular joint (TMJ) components, including the articular discs, using magnetic resonance imaging (MRI) in patients with hemifacial microsomia (HFM). SUBJECTS AND METHODS: Twenty TMJs in 10 patients with HFM were examined at closed- and open-mouth positions using an MRI scanner. The condyle-fossa and disc-condyle relationships, disc configuration at the closed-mouth position, and the reduction of the disc at the open-mouth position were evaluated. RESULTS: On the unaffected side, the condyle-fossa and disc-condyle relationships appeared fairly normal at the closed mouth position. The disc-condyle relationship at the open-mouth position was also normal. The TMJ disc showed normal biconcave configurations at both closed- and open-mouth positions. On the affected side, there was considerable variation in the state of the TMJ. At the closed-mouth position, 5 of the 10 patients revealed fairly normal disc-condyle relationships, one patient showed anterior displacement of the disc, and four patients had no disc. Two patients appeared biconcave, three patients appeared biplanar, and one patient was hemiconvex. At the open-mouth position, the condyle and disc moved in harmony in five patients with normal disc-condyle relationships, but the disc was reduced in a patients with anterior disc displacement. The degree of the TMJ disc dysplasia did not necessarily correspond with the degree of mandibular dysplasia. CONCLUSIONS: The present study contributes to an improved understanding of TMJ pathology in patients with HFM. The results suggest that, in HFM patients, the examination of the TMJ using MRI is helpful for determining treatment procedures in mandibular distraction osteogenesis.

Adolescent↗

PubMed2004

Craniofacial morphology in an unusual case with nasal aplasia studied by roentgencephalometry and three-dimensional CT scanning.

OBJECTIVE: To examine the three-dimensional morphology of internal structures of the craniofacial region and present the orthodontic problems in an unusual case with nasal aplasia. PATIENT: The patient was an 11.5-year-old boy with aplasia of the nose and nasal cavity with extremely constricted nasopharyngeal airway. He did not have mental or somatic retardation. The patient had dacryostenosis. The morphology of the craniofacial structures was characterized by absence of septal structures, including cribriform plate, perpendicular plate of ethmoid bone, vomer, and septal cartilage; bony hypotelorism; midface hypoplasia; short and retrognathic maxilla with Class III jaw relationship; average mandibular plane angle; high arched palate; severe anterior open bite with bilateral posterior crossbites; and dental anomalies (agenesis of four maxillary permanent teeth, microdontia, taurodontism, and short roots). Thus, the patient had characteristic dentofacial phenotype, which might be caused by a combination of the primary anomaly and the functional disturbances secondary to the nasal obstruction.

Cephalometry↗

PubMed2003

Volume and shape of masticatory muscles in patients with hemifacial microsomia.

OBJECTIVE: To test the following hypotheses in hemifacial microsomia (HFM): (1) the volumes of the masseter, lateral and medial pterygoid, and temporal muscles are reduced on the affected versus unaffected side; (2) significant differences exist between the degrees of right-left disproportion in these four masticatory muscles; (3) circumferential shapes of the masticatory muscles are more irregular on the affected versus unaffected side; and (4) the degree of masticatory muscle right-left disproportion can be judged by the degree of ear, mandibular, or dental anomalies. SUBJECTS AND METHODS: Ten preadolescent patients with HFM were studied using facial photographs, dental casts, cephalometric and panoramic radiographs, and helical computed tomography scanning and three-dimensional reconstruction technique. Volumes of masseter, lateral and medial pterygoid, and temporal muscles on both sides were measured. Muscle volume disproportion was expressed as the affected/unaffected ratio. Muscle circumferential irregularity was expressed as the ratio between the total circumferential length and corresponding cross-sectional area. RESULTS: Masticatory muscle volumes were significantly smaller on the affected versus unaffected side. No significant differences were observed between the degrees of disproportion of the four masticatory muscles examined. Circumferential shapes of masticatory muscles were significantly more irregular on the affected versus unaffected side. There were no significant relationships of the degree of ear, mandibular, or dental anomalies in relation to masticatory muscle disproportion. CONCLUSIONS: In HFM the masseter, lateral and medial pterygoid, and temporal muscles all have a significantly smaller volume on the affected versus unaffected side, and specific muscles were not severely affected in the present subjects. Furthermore, all four muscles showed a significantly more irregular shape on the affected versus unaffected side. Finally, the severity of masticatory muscle disproportion can probably not be judged by the degree of ear, mandibular, and dental anomalies in preadolescent patients with HFM.

Adolescent↗

PubMed2003

Report of a patient with hypoglossia-hypodactylia syndrome and a review of the literature.

OBJECTIVE: To present the morphology of the extremities, craniofacial structures, and the oral cavity based on roentgencephalometry and three-dimensional computed tomography and magnetic resonance imaging scanning in a patient with hypoglossia-hypodactylia syndrome, discuss the orthodontic treatment method, and review the literature for the syndrome. PATIENT: The patient was a 6-year-old boy diagnosed with hypoglossia-hypodactylia syndrome at birth. He had hypodactylia as well as micrognathia with steep inclination of the anterior surface of the mandible in relation to the lower mandibular plane. He had missing mandibular incisors with concomitant bone defect limited to the associated alveolar ridge and an absence of any malformations in the mandibular ramus and condylar head. The patient had a bilateral scissors bite with an extremely constricted mandibular dental arch, skeletal Class II jaw relationship with an average mandibular plane angle and maxillary incisors inclined palatally. He had extremely reduced tongue size and hypertrophy of the floor of the mouth. Anomalies of the central nervous system were not observed. There was no evidence of hearing loss.

Cephalometry↗

PubMed2003

Rigid external distraction osteogenesis for a patient with maxillary hypoplasia and oligodontia.

OBJECTIVE: In this report, the orthodontic treatment combined with rigid external distraction osteogenesis in a 5.5-year-old girl with midfacial hypoplasia and oligodontia is described. PATIENT: The child presented with a reduced maxilla, protruding lower lip, skeletal Class III jaw relationship with a low mandibular plane angle, a short and flattened nose, anterior crossbite, and aplasia of 16 permanent teeth. The patient was treated with rigid external maxillary distraction osteogenesis, maxillary protraction headgear, and Class III elastics. Following treatment, the maxilla was displaced in a forward direction with new bone formation at the tuberosities and the mandible rotated backward in relation to the anterior cranial base. The anterior crossbite was corrected, and the skeletal jaw relationship changed from a Class III to a Class I skeletal pattern. The soft tissue facial profile showed that the nasal projection had been increased, the nasolabial angle increased, and the lower lip protrusion was reduced. Postoperative treatment results were acceptable. CONCLUSION: This report documents that early maxillary advancement with rigid external osteogenesis offers a promising treatment alternative for a very young patient with maxillary hypoplasia and oligodontia.

Anodontia↗

PubMed2003

Mandibular distraction osteogenesis using an intraoral device and bite plate for a case of hemifacial microsomia.

OBJECTIVE: To present orthodontic treatment combined with mandibular distraction osteogenesis using an intraoral device and a bite plate in a patient with hemifacial microsomia, severe facial asymmetry, and unilateral mandibular hypoplasia. PATIENT: An 8-year-old girl exhibited mandibular deviation resulting from hypoplasia of the mandibular condyle and ramus on the left side. The patient was treated with an intraoral device for mandibular distraction osteogenesis, bite plate, and hybrid-type functional appliance. Facial asymmetry was improved, and the mandibular ramus was elongated in an anterior and primarily posterior direction with slightly posterior and superior displacement of the proximal segment. Postdistraction treatment results have been stable for 1 year. At the 1-year follow-up, the volume of the lateral and medial pterygoid muscles on the left side had increased. The condyle and disc on the right temporomandibular joint moved well and in harmony at open mouth position, and a rotational movement of the left temporomandibular joint was observed.

Cephalometry↗

PubMed2003

Craniofacial morphology in a patient with Simpson-Golabi-Behmel syndrome.

OBJECTIVE: We present the case of a 6-year-old boy with a coarse face, cleft palate, and malocclusion with anterior open bite who had been diagnosed with Simpson-Golabi-Behmel syndrome. Morphology of the craniofacial structures was examined on the basis of conventional radiographs, three-dimensional (3D) computed tomography (CT) and magnetic resonance (MR) scanning. PATIENT: This patient had 13 ribs on the right side, slight scoliosis, supernumerary nipples, a coarse face, hypertelorism, a short broad upturned nose, a wide mouth, a straight facial profile with incompetence of the lips, midline groove of tongue, and cleft palate. The patient also had severe anterior open bite, a distal step-type molar relationship, five congenitally missing teeth, and a supernumerary tooth. Lateral cephalometric analysis revealed a large anterior cranial base, a large maxilla and mandible, a large inferior face height, and skeletal Class I jaw relationship with a high mandibular plane angle and large gonial angle. The 3D CT image showed a large cranium, a long face height, and prominent skull sutures. The MR image showed a large tongue, midline groove of the tongue, and a small space between tongue and palate.

Abnormalities, Multiple↗

PubMed2003

Three-dimensional evaluation of a rare case with multiple impacted teeth using CT.

A 15-year-old patient is presented with 11 impacted teeth including 2 supernumerary teeth, who did not exhibit hereditary or clinical disease. The patient showed the extruded and lingually inclined lower incisors, the anteriorly inclined palatal plane, extremely large curve of Spee, and crowding in the bone. A detailed description of the positional relationship between each impacted tooth and the neighboring tooth was given using the 3D CT-image.

Adolescent↗

PubMed2002

Three-dimensional magnetic resonance image of the mandible and masticatory muscles in a case of juvenile chronic arthritis treated with the Herbst appliance.

The present report documents, in a case of juvenile chronic arthritis (JCA) with mandibular retrognathia, three-dimensional (3D) changes in the mandible and the relationship between the mandible and the masticatory muscles resulting from treatment with the Herbst appliance after cessation of growth. Magnetic resonance scanning of the whole head was carried out before and after treatment. The mandible, the masseter, and the medial and lateral pterygoid muscles were segmented bilaterally and reconstructed in 3D for both stages. Superimposition of the datasets was carried out according to anatomical structures in the brain (cranial base). Mandibular superimposition was performed according to the mandibular symphysis and the lower mandibular border. The mandible moved forward and downward relative to the anterior cranial base. In addition, bone apposition was observed at the superior and posterior surfaces of both mandibular condyles and at the roof of the glenoid fossa. The masticatory muscles remained relatively stable in position in relation to the anterior cranial base. To our knowledge, such information in JCA patients has not previously been published in the literature. Using magnetic resonance imaging (MRI), it was possible to gain improved insight into the 3D morphology including soft tissues without the overlap of the surrounding tissues observed in the conventional radiographs. Accordingly, it is suggested that 3D magnetic resonance analysis is a more useful method for the follow-up of the JCA patients than radiographic techniques.

Adolescent↗

PubMed2002

A stent fabricated on a selectively colored stereolithographic model for placement of orthodontic mini-implants.

The purpose of this report is to present a new method for placing orthodontic mini-implants using a stent fabricated on a selectively colored stereolithographic model. A stent was fabricated that incorporated a guide groove drilled in accordance with the planned direction of the mini-implant. Tooth crowns, gingiva, tooth roots, and the maxillary sinuses were clearly identified in the stereolithographic model. As a result, the stent could be fabricated while taking into account the anatomic characteristics of both the bone interior and the dental surface. A stent fabricated on the selectively colored stereolithographic model is suggested to be a promising device for guiding placement of orthodontic mini-implants adjacent to the tooth roots and the maxillary sinuses.

Color↗