PubMed Health⌕ Search

Biomedical subjects

Noriyuki Tamai

Publications and source records attributed to Noriyuki Tamai.

15 recordsLinked to original sources
PubMed2006

Oxygen tension regulates chondrocyte differentiation and function during endochondral ossification.

Cartilage functions at a lower oxygen tension than most other tissues. To determine the role of oxygen tension in chondrocyte differentiation and function, we investigated the influence of oxygen tension in the pluripotent mesenchymal cell line C3H10T1/2 and 14.5E mice embryo forelimb organ culture. 10T1/2 cells and embryo forelimbs were cultured under normoxia (20% O2) or hypoxia (5% O2) in the presence of recombinant human bone morphogenetic protein 2. To elucidate the mechanism by which oxygen tension influences chondrocyte differentiation, the Smad pathway was examined using Smad6 overexpression adenovirus and Smad6 transgenic mice embryo forelimbs. The p38 MAPK pathway was examined using dominant-negative MKK3 and FR167653, a specific p38 MAPK inhibitor. The transcriptional activities of Sox9 and Runx2 were also investigated. Hypoxia promoted bone morphogenetic protein 2-induced glycosaminoglycan production and suppressed alkaline phosphatase activity and mineralization of C3H10T1/2. Thus, hypoxia promoted chondrocytic commitment rather than osteoblastic differentiation. In the mice embryo forelimb organ culture, hypoxia increased cartilaginous matrix synthesis. These effects were primarily mediated by p38 MAPK activation, independent of Sox9. Hypoxia inhibited Col10a1 (type X collagen alpha1) expression via down-regulation of Runx2 activity by Smad suppression and histone deacetylase 4 activation. In conclusion, hypoxia promotes chondrocytic differentiation and cartilage matrix synthesis and suppresses terminal chondrocyte differentiation. These hypoxia-induced phenomena may act on chondrocytes to enhance and preserve their phenotype and function during chondrocyte differentiation and endochondral ossification.

Animals↗
PubMed2005

False positive 18F-FDG PET in an ischial chondroblastoma; an analysis of glucose transporter 1 and hexokinase II expression.

We report a rare case of chondroblastoma arising from the ischium which showed an increased (18)F-FDG uptake. Chondroblastoma is an uncommon lesion and usually involves the epiphysis of long bones. However, in this case, the tumor appeared as a well-defined osteolytic lesion in the ischium on radiographs. MR imaging demonstrated two components in the tumor: a solid one and a multilobular cystic component. (18)F-FDG PET imaging revealed an increased uptake in the ischium. The (18)F-FDG uptake resembled the results observed in malignant bone tumors. A histological diagnosis of chondroblastoma was obtained from tissue of an open biopsy. An immunohistochemical analysis demonstrated weak expression of both Glut-1 and HK-II. These findings suggest that Glut-1 and HK-II expression are not strongly related to FDG uptake in chondroblastoma.

Adult↗
PubMed2005

Leptin regulates chondrocyte differentiation and matrix maturation during endochondral ossification.

Leptin has been suggested to mediate a variety of actions, including bone development, via its ubiquitously expressed receptor (Ob-Rb). In this study, we investigated the role of leptin in endochondral ossification at the growth plate. The growth plates of wild-type and ob/ob mice were analyzed. Effects of leptin on chondrocyte gene expression, cell cycle, apoptosis and matrix mineralization were assessed using primary chondrocyte culture and the ATDC5 cell differentiation culture system. Immunohistochemistry and in situ hybridization showed that leptin was localized in prehypertrophic chondrocytes in normal mice and that Ob-Rb was localized in hypertrophic chondrocytes in normal and ob/ob mice. Growth plates of ob/ob mice were more fragile than those of wild-type mice in a mechanical test and were broken easily at the chondro-osseous junction. The growth plates of ob/ob mice showed disturbed columnar structure, decreased type X collagen expression, less organized collagen fibril arrangement, increased apoptosis and premature mineralization. Leptin administration in ob/ob mice led to an increase in femoral and humeral lengths and decrease in the proportional length of the calcified hypertrophic zone to the whole hypertrophic zone. In primary chondrocyte culture, the matrix mineralization in ob/ob chondrocytes was stronger than that of wild-type mice; this mineralization in both types of mice was abolished by the addition of exogenous leptin (10 ng/ml). During ATDC5 cell differentiation culture, exogenous leptin at a concentration of 1-10 ng/ml (equivalent to the normal serum concentration of leptin) altered type X collagen mRNA expression and suppressed apoptosis, cell growth and matrix calcification. In conclusion, we demonstrated that leptin modulates several events associated with terminal differentiation of chondrocytes. Our finding that the growth plates of ob/ob mice were fragile implies a disturbance in the differentiation/maturation process of growth plates due to depletion of leptin signaling in ob/ob mice. These findings suggest that peripheral leptin signaling plays an essential role in endochondral ossification at the growth plate.

Animals↗
PubMed2005

Macro-structural effect of metal surfaces treated using computer-assisted yttrium-aluminum-garnet laser scanning on bone-implant fixation.

Porous coatings have been applied to the surface of prosthetic devices to foster stable device fixation. The coating serves as a source of mechanical interlocking and may stimulate healthy bone growth through osseointegrated load transfer in cementless arthroplasty. Joint arthroplasty by porous-coated prostheses is one of the most common surgical treatments, and has provided painless and successful joint mobility. However, long-term success is often impaired by the loss of fixation between the prosthesis and bone. Porous-coated prostheses are associated with several disadvantages, including metal debris from porous coatings (third body wear particles) and irregular micro-texture of metal surfaces. Consequently, quantitative histological analysis has been very difficult. These issues arise because the porous coating treatment is based on addition of material and is not precisely controllable. We recently developed a precisely controllable porous texture technique based on material removal by yttrium-aluminum-garnet laser. Free shapes can be applied to complex, three-dimensional hard metal surfaces using this technique. In this study, tartan check shapes made by crossing grooves and dot shapes made by forming holes were produced on titanium (Ti6A14V) or cobalt chrome (CoCr) and evaluated with computer-assisted histological analysis and measurement of bone-metal interface shear strength. Width of grooves or holes ranged from 100 to 800 mum (100, 200, 500, and 800 microm), with a depth of 500 microm. When the cylindrical porous-texture-treated metal samples (diameter, 5 mm; height, 15 mm) were implanted into a rabbit femoral condyle, bone tissue with bone trabeculae formed in the grooves and holes after 2 or 4 weeks, especially in 500-microm-wide grooves. Abundant osteoconduction was consistently observed throughout 500-microm-wide grooves in both Ti6A14V and CoCr. Speed of osteoconduction was faster in Ti6A14V than in CoCr, especially in the tartan check shape made of 500-microm-wide grooves. In pushout testing, the tartan check shape made of 500-microm-wide grooves had significantly higher bone-metal interface shear strength than the dot shape or commercial porous coating. These results indicate that the tartan check shape made of 500-microm-wide grooves on metal surfaces has potential for clinical application in artificial prosthesis design.

Aluminum↗
PubMed2005

FDG-PET imaging for chronic expanding hematoma in pelvis with massive bone destruction.

Chronic expanding hematoma is a rare presentation of a hematoma characterized by a persistent increase in size for more than a month after the initial hemorrhage. We present a 65-year-old man with a chronic expanding hematoma in his ilium who was receiving anticoagulant treatment. The patient had a delayed manifestation of a femoral neuropathy with massive bone destruction. 2-Deoxy-[18F]fluoro-D: -glucose (FDG) positron emission tomography (PET) imaging revealed an increased uptake in the rim of the mass in images acquired 1 h after FDG injection. FDG-PET scans were performed using a dedicated PET scanner (HeadtomeV/SET2400 W, Shimadzu, Kyoto, Japan), and the PET data for the most metabolically active region of interest (ROI) were analyzed. The maximum standardized uptake value (SUVmax) was set to a cut-off point of 3.0 to distinguish between benign and malignant lesions. The SUVmax of the patient's lesion was 3.10, suggesting a malignant lesion. The characteristics of FDG-PET images of chronic expanding hematomas, including the uptake of FDG in the peripheral rim of the mass as a result of inflammation, should be recognized as a potential interpretive pitfall in mimicking a sarcoma.

Aged↗
PubMed2005

Potentiation of the activity of bone morphogenetic protein-2 in bone regeneration by a PLA-PEG/hydroxyapatite composite.

Bone morphogenetic proteins (BMPs) are biologically active molecules capable of inducing new bone formation, and show potential for clinical use in bone defect repair. However, an ideal system for delivering BMPs that can potentiate their bone-inducing ability and provide initial mechanical strength and scaffold for bone ingrowth has not yet been developed. In this study, to construct a carrier/scaffold system for BMPs, we combined two biomaterials: interconnected-porous calcium hydroxyapatite ceramics (IP-CHA), and the synthetic biodegradable polymer poly D,L,-lactic acid-polyethyleneglycol block co-polymer (PLA-PEG). We used a rabbit radii model to evaluate the bone-regenerating efficacy of rhBMP-2/PLA-PEG/IP-CHA composite. At 8 weeks after implantation, all bone defects in groups treated with 5 or 20 microg of BMP were completely repaired with sufficient strength. Furthermore, using this carrier scaffold system, we reduced the amount of BMP necessary for such results to about a tenth of the amount needed in previous studies, probably due to the superior osteoconduction ability of IP-CHA and the optimal drug delivery system provided by PLA-PEG, inducing new bone formation in the interconnected pores. The present findings indicate that the synthetic biodegradable polymer/IP-CHA composite is an excellent combination carrier/scaffold delivery system for rhBMP-2, and that it strongly promotes the clinical effects of rhBMP-2 in bone tissue regeneration.

Animals↗
PubMed2005

A new biotechnology for articular cartilage repair: subchondral implantation of a composite of interconnected porous hydroxyapatite, synthetic polymer (PLA-PEG), and bone morphogenetic protein-2 (rhBMP-2).

OBJECTIVE: Articular cartilage repair remains a major obstacle in tissue engineering. We recently developed a novel tool for articular cartilage repair, consisting of a triple composite of an interconnected porous hydroxyapatite (IP-CHA), recombinant human bone morphogenetic protein-2 (rhBMP-2), and a synthetic biodegradable polymer [poly-d,l-lactic acid/polyethylene glycol (PLA-PEG)] as a carrier for rhBMP-2. In the present study, we evaluated the capacity of the triple composite to induce the regeneration of articular cartilage. METHODS: Full-thickness cartilage defects were created in the trochlear groove of 52 New Zealand White rabbits. Sixteen defects were filled with the bone morphogenetic protein (BMP)/PLA-PEG/IP-CHA composite (group I), 12 with PLA-PEG/IP-CHA (group II), 12 with IP-CHA alone (group III), and 12 were left empty (group IV). The animals were killed 1, 3, and 6 weeks after surgery, and the gross appearance of the defect sites was assessed. The harvested tissues were examined radiographically and histologically. RESULTS: One week after implantation with the BMP/PLA-PEG/IP-CHA composite (group I), vigorous repair had occurred in the subchondral defect. It contained an agglomeration of mesenchymal cells which had migrated from the surrounding bone marrow either directly, or indirectly via the interconnecting pores of the IP-CHA scaffold. At 6 weeks, these defects were completely repaired. The regenerated cartilage manifested a hyaline-like appearance, with a mature matrix and a columnar organization of chondrocytes. CONCLUSIONS: The triple composite of rhBMP-2, PLA-PEG, and IP-CHA promotes the repair of full-thickness articular cartilage defects within as short a period as 3 weeks in the rabbit model. Hence, this novel cell-free implant biotechnology could mark a new development in the field of articular cartilage repair.

Animals↗
PubMed2005

The effect of simulated microgravity by three-dimensional clinostat on bone tissue engineering.

Evidence suggests that mechanical stress, including gravity, is associated with osteoblast differentiation and function. To examine effects of microgravity on bone tissue engineering, we used a three-dimensional (3D) clinostat manufactured by Mitsubishi Heavy Industries (Kobe, Japan). A 3D clinostat is a device that generates multidirectional G force. By controlled rotation on two axes, it cancels the cumulative gravity vector at the center of the device. We cultured rat marrow mesenchymal cells (MMCs) in the pores of interconnected porous calcium hydroxyapatite (IP-CHA) for 2 weeks in the presence of dexamethasone using the 3D clinostat (clinostat group). MMCs cultured using the 3D clinostat exhibited a 40% decrease in alkaline phosphatase activity (a marker of osteoblastic differentiation), compared with control static cultures (control group). SEM analysis revealed that although there was no difference between the two groups in number or distribution of cells in the pores, the clinostat group exhibited less extensive extracellular matrix formation than the control group. Cultured IP-CHA/MMC composites were then implanted into subcutaneous sites of syngeneic rats and harvested 8 weeks after implantation. All implants showed bone formation inside the pores, as indicated by decalcified histological sections and microfocus computed tomography. However, the volume of newly formed bone was significantly lower for the clinostat group than for the control group, especially in the superficial pores close to the implant surface. These results indicate that new bone formation in culture was inhibited by use of the 3D clinostat, and that this inhibition was mainly due to suppression of osteoblastic differentiation of MMCs.

Animals↗
PubMed2004

Peripheral nerve schwannoma: two cases exhibiting increased FDG uptake in early and delayed PET imaging.

We present two cases of peripheral nerve schwannoma which showed an increased accumulation of 2-deoxy-[(18)F] fluoro-D-glucose (FDG) in the tumors on positron emission tomography (PET) imaging acquired at both 1 h (early phase) and 2 h (delayed phase) after FDG injection. FDG-PET scans were performed with a dedicated PET scanner (HeadtomeV/ SET2400 W, Shimadzu, Kyoto, Japan) and the PET data analyzed the most metabolically active region of interest (ROI). We set the maximum standardized uptake value (SUV max) with a cut-off point of 3.0 to distinguish benign and malignant lesions. Although the mechanism responsible for the increased FDG uptake in benign schwannomas remains unknown, we discuss our findings in the context of tumor cellularity and briefly review other studies on the subject.

Adult↗
PubMed2004

Bone tissue engineering using novel interconnected porous hydroxyapatite ceramics combined with marrow mesenchymal cells: quantitative and three-dimensional image analysis.

We developed fully opened interconnected porous calcium hydroxyapatite ceramics having two different pore sizes. One has pores with an average size of 150 microm in diameter, an average 40-microm interconnecting pore diameter, and 75% porosity (HA150). The other has pores with an average size of 300 microm in diameter, an average 60-100-microm interconnecting pore diameter, and 75% porosity (HA300). Because of its smaller pore diameter, HA150 has greater mechanical strength than that of HA300. These ceramics were combined with rat marrow mesenchymal cells and cultured for 2 weeks in the presence of dexamethasone. The cultured ceramics were then implanted into subcutaneous sites in syngeneic rats and harvested 2-8 weeks after implantation. All the implants showed bone formation inside the pore areas as evidenced by decalcified histological sections and microcomputed tomography images, which enabled three-dimensional analysis of the newly formed bone and calculation of the bone volume in the implants. The bone volume increased over time. At 8 weeks after implantation, extensive bone volume was detected not only in the surface pore areas but also in the center pore areas of the implants. A high degree of alkaline phosphatase activity with a peak at 2 weeks and a high level of osteocalcin with a gradual increase over time were detected in the implants. The levels of these biochemical parameters were higher in HA150 than in HA300. The results indicate that a combination of HA150 and mesenchymal cells could be used as an excellent bone graft substitute because of its mechanical properties and capability of inducing bone formation.

Animals↗
PubMed2003

Unusual skeletal metastases from myxoid liposarcoma only detectable by MR imaging.

We present two cases of skeletal metastases from myxoid liposarcoma, occurring several years after treatment of the primary tumors in the lower limb. The present two case reports have unusual radiological features only detectable by MR imaging and not by plain radiographs or bone scans. From the present two cases, we found that a negative plain radiograph of the spine or a negative bone scan could not exclude skeletal metastases from myxoid liposarcoma, and MRI was a more sensitive screening procedure for their detection, especially in T1-weighted images. Unusual radiological features of skeletal metastases from myxoid liposarcoma are not well documented and only a few cases have been previously reported. Our aim is to document two more patients exhibiting the unusual radiological features of skeletal metastases from myxoid liposarcoma to improve their early detection and management.

Adult↗
PubMed2003

Overexpression of the Wilms' tumor gene WT1 in human bone and soft-tissue sarcomas.

The expression levels of the Wilms' tumor gene WT1 were examined in 36 cases of various types of human bone and soft-tissue sarcomas using quantitative real-time reverse transcription-polymerase chain reaction (RT-PCR). They included 12 malignant fibrous histiocytomas (MFH), 3 malignant peripheral nerve sheath tumors (MPNST), 6 synovial sarcomas (SyS), 4 myxoid liposarcomas (MyLS), one angiosarcoma (AGS), one clear cell sarcoma (CCS), and 9 osteosarcomas (OS). Eleven (92%) of 12 MFH, 2 (67%) of 3 MPNST, all (100%) of 6 SyS, 2 (50%) of 4 MyLS, one AGS, one CCS, and 5 (56%) of 9 OS cases overexpressed WT1 in the range of 1.4 x 10(-3)-3.9 x 10(-1) levels (WT1 expression level in K562 leukemic cells was defined as 1.0). Thus, 28 (78%) out of 36 various types of human bone and soft-tissue sarcomas overexpressed the WT1 gene. Immunohistochemical analysis showed positive staining for WT1 protein in all of 4 cases (one case each of MFH, MyLS, AGS and OS) with WT1 gene overexpression detected by RT-PCR analysis, demonstrating clearly that WT1 was expressed at the protein level in various types of human bone and soft-tissue sarcomas. The direct sequencing analysis of the WT1 genomic DNA showed no mutations in any of 10 exons of the WT1 gene in 8 different sarcoma samples (3 MFH, one SyS, one MyLS, one AGS, and 2 OS). The present study demonstrates that various types of human bone and soft-tissue sarcomas frequently overexpress the wild-type WT1 gene, suggesting an important role of the wild-type WT1 gene in tumorigenesis of various types of human bone and soft-tissue sarcomas.

Adult↗
PubMed2002

Novel hydroxyapatite ceramics with an interconnective porous structure exhibit superior osteoconduction in vivo.

Calcium hydroxyapatite ceramics (CHA) are nontoxic materials, provoke little reaction from tissues, and by virtue of these properties represent a good starting point for creating bone substitutes. Although several porous CHAs have been used clinically, there have been few reports that CHA is fully replaced by newly formed bone, which may be due to its structure and the limited connectivity between pores. We recently developed a fully interconnected porous CHA (IP-CHA) by adopting a "foam-gel" technique. Structural analysis by scanning electron microscopy revealed that IP-CHA had spherical pores of uniform size that were interconnected by window-like holes. The surface of the wall structure was smooth, and hydroxyapatite particles were bound tightly to one another. Most of the interpore connections of IP-CHA ranged from 10 to 80 microm in diameter (average, 40 microm). When the cylindrical IP-CHA (diameter, 6 mm; height, 15 mm) was implanted into a rabbit femoral condyle, bone, and bone marrow with abundant vessels formed deep in the pores through the interpore connections. Within a period of 6 weeks, new bone had formed and penetrated to a distance of 3 mm from the surface of the IP-CHA implant. Furthermore, a compression test at 9 weeks revealed that the implanted IP-CHA steadily increased in strength to more than double the value of the initial test. These results indicate that the IP-CHA may have clinical utility as a superior bone substitute.

Animals↗
PubMedDate not supplied

Capillary vessel network integration by inserting a vascular pedicle enhances bone formation in tissue-engineered bone using interconnected porous hydroxyapatite ceramics.

The aim of the present study was to investigate the possibility of integrating porous hydroxyapatite (HA) ceramics with a capillary vessel network via insertion of a vascular pedicle, and to determine whether this procedure enhances new bone formation in tissue engineering of bone. First, synthetic interconnected porous HA (IP-CHA) was implanted subcutaneously into rat groin with or without insertion of superficial inferior epigastric vessels. At 6 weeks, IP-CHA with vascular insertion contained thick fibrous connective tissue with a number of large blood vessels that seemed to derive from the inserted vascular bundle. Next, IP-CHA loaded with recombinant human bone morphogenetic protein 2 (BMP, 2 or 10 microg/block) was implanted with or without vascular insertion. At 3 weeks, IP-CHA/BMP (10 microg) composite with vascular insertion exhibited abundant new bone formation in the pores of the deep portion close to the inserted vessels. In contrast, IP-CHA/BMP (10 microg) without vascular insertion showed poor bone formation. Histomorphometric analysis demonstrated that vascular insertion significantly increased new bone formation. In IP-CHAs with a lower dose of BMP (2 microg), no bone formation was found, with or without vascular insertion. These results suggest that the present system of integrating a vascular network with IP-CHA is a useful technique for bone tissue engineering.

Animals↗