PubMed Health⌕ Search

Biomedical subjects

O H Griffith

Publications and source records attributed to O H Griffith.

At least 19 recordsLinked to original sources
PubMed1992

Substrate stereospecificity of phosphatidylinositol-specific phospholipase C from Bacillus cereus examined using the resolved enantiomers of synthetic myo-inositol 1-(4-nitrophenyl phosphate).

The substrate stereospecificity of phosphatidylinositol-specific phospholipase C from Bacillus cereus is examined using the resolved optical isomers of synthetic myo-inositol 1-(4-nitrophenyl phosphate), a chromogenic substrate for the phospholipase. The synthetic route employs mild acid-labile protecting groups and separation of the substituted myo-inositol enantiomers as the (-)-camphanyl ester diastereomers. Measurements of the initial rates of cleavage of the D and L enantiomers of the nitrophenyl substrate by phosphatidylinositol-specific phospholipase C from B. cereus show that this enzyme is essentially stereospecific for the D enantiomer. Under identical conditions, the rate of cleavage of the L isomer is less than 0.2% of that observed for the D isomer. The same is observed for the highly homologous enzyme from Bacillus thuringiensis. There is no measurable inhibition by the L enantiomer of the B. cereus enzyme acting on the D enantiomer, even when the molar ratio of L:D is 5, indicating that binding of the L enantiomer to the phospholipase is negligible. Thus, the enzyme active site is exquisitely sensitive to the stereochemistry of the myo-inositol group of the substrate.

Bacillus cereus↗
PubMed1992

A high level of cell surface phosphatidylinositol-specific phospholipase C activity is characteristic of growth-arrested 3T3 fibroblasts but not of transformed variants.

Confluent monolayers of four contact-inhibited mouse fibroblast lines (Swiss 3T3, Balb/c 3T3, NIH 3T3, and C3H10T1/2) were found to have substantial levels of a cell surface phosphatidylinositol-specific phospholipase C (ecto-PLC). In contrast, confluent cultures of virally, chemically, or spontaneously transformed variants derived from these cell lines expressed undetectable or negligible levels of this enzyme activity. A simple and rapid assay, using lysophosphatidylinositol radio-labeled in the inositol group ([3H]-lysoPI) as the substrate was developed to provide a quantitative measure of the phospholipase C activity present at the external cell surface. For cells testing positive for ecto-PLC activity, rapid uptake of [3H]-lysoPI is accompanied by the simultaneous appearance of [3H]-inositol phosphate in the external medium. Confluent monolayers of the four mouse fibroblast lines exhibiting density-dependent growth inhibition had levels of ecto-PLC activity in the range of 50-800 pmol/min/10(6) cells (i.e., about 20-50 times greater than the activity observed for the transformed variants). The expression of ecto-PLC activity at the cell surface of the Swiss or Balb/c cells was dependent on the state of cell proliferation. Cultures which had become quiescent through attainment of confluence displayed a tenfold increased activity over that of subconfluent, growing cultures of these cells. Similarly, subconfluent Swiss 3T3 cells which had become quiescent following exposure to low serum conditions also showed increased activity. These results indicate that there may exist a correlation between the control of cell proliferation in contact-inhibited mouse fibroblasts and the expression of inositol phospholipid-specific phospholipase C activity at the external cell surface.

3T3 Cells↗
PubMed1992

Emission microscopy and related techniques: resolution in photoelectron microscopy, low energy electron microscopy and mirror electron microscopy.

A unified treatment of the resolution of three closely related techniques is presented: emission electron microscopy (particularly photoelectron microscopy, PEM), low energy electron microscopy (LEEM), and mirror electron microscopy (MEM). The resolution calculation is based on the intensity distribution in the image plane for an object of finite size rather than for a point source. The calculations take into account the spherical and chromatic aberrations of the accelerating field and of the objective lens. Intensity distributions for a range of energies in the electron beam are obtained by adding the single-energy distributions weighted according to the energy distribution function. The diffraction error is taken into account separately. A working resolution is calculated that includes the practical requirement for a finite exposure time, and hence a finite non-zero current in the image. The expressions for the aberration coefficients are the same in PEM and LEEM. The calculated aberrations in MEM are somewhat smaller than for PEM and LEEM. The resolution of PEM is calculated to be about 50 A, assuming conventional UV excitation sources, which provide current densities at the specimen of 5 x 10(-5) A/cm2 and emission energies ranging up to 0.5 eV. A resolution of about 70 A has been demonstrated experimentally. The emission current density at the specimen is higher in LEEM and MEM because an electron gun is used in place of a UV source. For a current density of 5 x 10(-4) A/cm2 and the same electron optical parameters as for PEM, the resolution is calculated to be 27 A for LEEM and 21 A for MEM.

Mathematics↗
PubMed1992

Low-energy electron microscopy (LEEM) and mirror electron microscopy (MEM) of biological specimens: preliminary results with a novel beam separating system.

Low-energy electron microscopy (LEEM) and mirror electron microscopy (MEM) utilize a parallel beam of slow-moving electrons backscattered from the specimen surface to form an image. If the electrons strike the surface an LEEM image is produced and if they are turned back just before reaching the surface an MEM image results. The applications thus far have been in surface physics. In the present study, applications of LEEM and MEM in the biological sciences are discussed. The preliminary results demonstrate the feasibility of forming images of uncoated cultured cells and cellular components using electrons in the threshold region (i.e. 0-10 V). The results also constitute a successful test of a novel beam-separating system for LEEM and MEM.

Animals↗
PubMed1991

A fluorescent substrate for the continuous assay of phosphatidylinositol-specific phospholipase C: synthesis and application of 2-naphthyl myo-inositol-1-phosphate.

A fluorescent water-soluble substrate for phosphatidylinositol-specific phospholipase C was synthesized. The diacylglycerol moiety of the natural substrate, phosphatidylinositol, was replaced by the fluorescent moiety, 2-naphthol, resulting in the synthetic substrate, racemic 2-naphthyl myo-inositol-1-phosphate. The synthetic substrate provided a continuous fluorometric assay for the phosphatidylinositol-specific phospholipase C from Bacillus cereus. Initial rates of the cleavage of the 2-naphthyl substrate by the phospholipase measured by fluorometry were linear with time and the amount of enzyme added. The specific enzyme activity at pH 8.5 and 25 degrees C was about 0.04 mumol/min mg protein at an initial substrate concentration of 0.8 mM. 31P NMR experiments suggest that, as with phosphatidylinositol itself, cleavage of the fluorescent substrate proceeds in two steps via a myo-inositol-1,2-cyclic phosphate intermediate, and that only the D-isomer is a substrate for the B. cereus phospholipase. The synthetic substrate was stable during long-term storage as a solid in the dark at -20 degrees C. It was also stable for several weeks when stored in the dark frozen in aqueous solution near neutral pH.

Bacillus cereus↗
PubMed1991

A chromogenic substrate for phosphatidylinositol-specific phospholipase C: 4-nitrophenyl myo-inositol-1-phosphate.

A chromogenic water-soluble substrate for phosphatidylinositol-specific phospholipase C was synthesized starting from myo-inositol employing isopropylidene and 4-methoxytetrahydropyranyl protecting groups. In this analogue of phosphatidylinositol, 4-nitrophenol replaces the diacylglycerol moiety, resulting in synthetic, racemic 4-nitrophenyl myo-inositol-1-phosphate. Using this synthetic substrate a rapid, convenient and sensitive spectrophotometric assay for the phosphatidylinositol-specific phospholipase C from Bacillus cereus was developed. Initial rates of the cleavage of the nitrophenol substrate were linear with time and the amount of enzyme used. At pH 7.0, specific activities for the B. cereus enzyme were 77 and 150 mumol substrate cleaved min-1 (mg protein)-1 at substrate concentrations of 1 and 2 mM, respectively. Under these conditions, less than 50 ng quantities of enzyme were easily detected. The chromogenic substrate was stable during long term storage (6 months) as a solid at -20 degrees C.

Chromogenic Compounds↗
PubMed1991

Historical perspective and current trends in emission microscopy, mirror electron microscopy and low-energy electron microscopy. An introduction to the proceedings of the Second International Symposium and Workshop on Emission microscopy and Related Techniques.

Emission microscopes and related instruments comprise a specialized class of electron microscopes that have in common an acceleration field in combination with the first stage of imaging (i.e., an immersion objective lens, also called a cathode lens or emission lens). These imaging techniques include photoelectron emission microscopy (PEEM or PEM), electron emission induced by heat, ions, or neutral particles, mirror electron microscopy (MEM), and low-energy electron microscopy (LEEM), among others. In these instruments the specimen is placed on a flat cathode or is the cathode itself. The low-energy electrons that are emitted, reflected, or backscattered from the specimen are first accelerated and then imaged by means of an electron lens system resembling that of a transmission electron microscope. The image is formed in a parallel mode in all of the above instruments, in contrast to the image in scanning electron microscopes, where the information is collected sequentially by scanning the specimen. A brief history and introduction to emission microscopy, MEM, and LEEM is presented as a background for the Proceedings of the Second International Symposium and Workshop on this subject, held in Seattle, Washington, August 16-17, 1990. Current trends in this field gleaned from the presentations at that meeting are discussed.

China↗
PubMed1991

Design and performance of a high-resolution photoelectron microscope.

The design of a high-resolution photoelectron microscope (photoelectron emission microscope) is described. It is an oil-free ultrahigh-vacuum instrument utilizing electrostatic electron optics. New designs are presented for a specimen translator, cathode stage, aperture stop control, electrostatic hexapole stigmator, beam shutter, and camera system. These components could also be used in a low-energy electron microscope (LEEM). The theoretical resolution of this instrument is 5 nm for UV illumination near the photoemission threshold. The photoelectron microscope is now in operation at the University of Oregon, and it is achieving results within a factor of two of this design limit.

Computer Terminals↗
PubMed1991

A computer-aided control, design and image-processing system for electron microscopes.

A computer-control system for electron microscopes is described. The aim is to reduce a complex series of vacuum-system controls to a menu-driven program that simplifies the operation of the microscope. The system also incorporates image processing, notebook, computer-aided design, and communication functions. It is designed around a commercially available computer workstation. This system has been implemented on an institute-built photoelectron microscope of ultrahigh-vacuum design.

Computer Graphics↗
PubMed1991

Biological applications of photoelectron imaging: a practical perspective.

Photoelectron imaging is finding a promising niche in the study of biological specimens. The features of photoelectron imaging that contribute to its uniqueness for this application are described. Image formation and the major contrast mechanisms of photoelectron microscopy, material contrast and topographical contrast are reviewed and illustrated with examples of photoelectron images of cultured cells and of DNA. General considerations in sample choice and preparation are also presented. Strategies for photoelectron labeling are discussed including the use of immunogold labeling, silver enhancement and cesium-based photocathodes.

Animals↗
PubMed1991

High-level expression in Escherichia coli and rapid purification of phosphatidylinositol-specific phospholipase C from Bacillus cereus and Bacillus thuringiensis.

The construction of four vectors for high-level expression in Escherichia coli of the phosphatidylinositol-specific phospholipase C from Bacillus cereus or Bacillus thuringiensis is described. In all constructs the coding sequence for the mature phospholipase is precisely fused to the E. coli heat-stable enterotoxin II signal sequence for targeting of the protein to the periplasm. In one set of plasmids expression of the B. cereus or B. thuringiensis enzyme is under control of the E. coli alkaline phosphatase promoter, while in a second set of plasmids expression is under control of a lac-tac-tac triple tandem promoter. A simple and rapid procedure for complete purification of the phospholipase C overproduced in E. coli, involving isolation of the periplasmic proteins by osmotic shock followed by a single column chromatography step, is described. The largest quantity of purified enzyme, 40-60 mg per liter culture, is obtained with the plasmid expressing the B. cereus enzyme under control of the lac-tac-tac promoter. Lower quantities are obtained with the plasmids containing the alkaline phosphatase promoter (15-20 and 4-6 mg/liter for the B. cereus and B. thuringiensis enzymes, respectively) and with the plasmid expressing the B. thuringiensis phospholipase under control of the lac-tac-tac promoter (15-20 mg/liter). A comparison of the functional properties of the recombinant phospholipases with the native enzymes isolated from B. cereus or B. thuringiensis culture supernatant shows that they are identical with respect to their catalytic functions, viz., cleavage of phosphatidylinositol and cleavage of the glycosyl-phosphatidylinositol membrane anchor of bovine erythrocyte acetylcholinesterase.

Amino Acid Sequence↗
PubMed1991

Phorbol ester-induced actin cytoskeletal reorganization requires a heavy metal ion.

The cell-permeant heavy metal chelator N,N,N',N'-tetrakis(2-pyridylmethyl)ethylenediamine(TPEN) was found to counteract phorbol ester-induced actin reorganization in PTK2 and Swiss 3T3 cells. By using fluorescence and the higher resolution technique of photoelectron microscopy to monitor actin patterns, 15-min pretreatment with 25-50 microM TPEN was found to dramatically reduce actin alterations resulting from subsequent phorbol ester treatment in PTK2 cells. Similar results were obtained with Swiss 3T3 cells using 50 microM TPEN for 1.5 h. Phorbol ester-induced actin alterations are thought to depend on activation of protein kinase C (PKC). In contrast to the phorbol ester effect, the PKC-independent actin cytoskeletal disruption caused by staurosporine and cytochalasin B was unaffected by TPEN pretreatment. TPEN did not block phorbol ester-induced activation of PKC in Swiss 3T3 cells, as observed by the phosphorylation of the 80K PKC substrate protein (MARCKS protein). TPEN also did not inhibit partially purified PKC from Swiss 3T3 cells in an in vitro PKC-specific commercial assay. To establish that the effect of TPEN is the removal of metal ions and not some other nonspecific effect of TPEN, a series of transition metal ions was added at the end of the TPEN pretreatment. The results indicate that the transient but dramatic phorbol ester-induced reorganization of the actin cytoskeleton in cultured cells depends on an interaction of PKC with a heavy metal, probably zinc.

3T3 Cells↗
PubMed1990

Inhibition of the phosphatidylinositol-specific phospholipase C from Bacillus cereus by a monoclonal antibody binding to a region with sequence similarity to eukaryotic phospholipases.

Bacterial phosphatidylinositol-specific phospholipases C (PI-PLC) display similar substrate specificity as their eukaryotic counterparts involved in signal transduction of insulin and Ca2(+)-mobilizing hormones, and are used in the study of the novel glycosylphosphatidylinositol-protein anchors (GPI-anchors). For the investigation of structure-function aspects of the PI-PLC secreted from Bacillus cereus cells, a panel of murine monoclonal antibodies was generated and shown to be specific for the PI-PLC polypeptide in enzyme-linked immunosorbent assays and Western blots. Two of the monoclonals inhibited reactions catalyzed by the bacterial enzyme in vitro: hydrolysis of phosphatidylinositol and the release of bovine erythrocyte acetylcholinesterase from its GPI-anchor. At saturating concentrations of inhibitory antibody only a few percent of the enzyme activity remained. The epitope recognized by one of the inhibitory antibodies, A72-24, was mapped by proteolytic digestion, protein sequencing, and Western blotting of the generated fragments. The data indicate that at least part of the epitope resides within an 8 kDa-stretch of the bacterial PI-PLC (Gln-45 - Lys-122). Essentially the same segment of the bacterial polypeptide has previously been shown to display limited amino acid sequence similarity with several eukaryotic PI-specific phospholipases C (Kuppe, A., Evans, L.M., McMillen, D.A. and Griffith, O.H. (1989) J. Bacteriol. 171, 6077-6083). The results reported here suggest that the conserved peptide of these enzymes may contain functionally important residues.

Acetylcholinesterase↗
PubMed1990

Phosphatidylinositol-specific phospholipase C from Bacillus cereus combines intrinsic phosphotransferase and cyclic phosphodiesterase activities: a 31P NMR study.

The inositol phosphate products formed during the cleavage of phosphatidylinositol by phosphatidylinositol-specific phospholipase C from Bacillus cereus were analyzed by 31P NMR. 31P NMR spectroscopy can distinguish between the inositol phosphate species and phosphatidylinositol. Chemical shift values (with reference to phosphoric acid) observed are 0.41, 3.62, 4.45, and 16.30 ppm for phosphatidylinositol, myo-inositol 1-monophosphate, myo-inositol 2-monophosphate, and myo-inositol 1,2-cyclic monophosphate, respectively. It is shown that under a variety of experimental conditions this phospholipase C cleaves phosphatidylinositol via an intramolecular phosphotransfer reaction producing diacylglycerol and D-myo-inositol 1,2-cyclic monophosphate. We also report the new and unexpected observation that the phosphatidylinositol-specific phospholipase C from B. cereus is able to hydrolyze the inositol cyclic phosphate to form D-myo-inositol 1-monophosphate. The enzyme, therefore, possesses phosphotransferase and cyclic phosphodiesterase activities. The second reaction requires thousandfold higher enzyme concentrations to be observed by 31P NMR. This reaction was shown to be regiospecific in that only the 1-phosphate was produced and stereospecific in that only D-myo-inositol 1,2-cyclic monophosphate was hydrolyzed. Inhibition with a monoclonal antibody specific for the B. cereus phospholipase C showed that the cyclic phosphodiesterase activity is intrinsic to the bacterial enzyme. We propose a two-step mechanism for the phosphatidyl-inositol-specific phospholipase C from B. cereus involving sequential phosphotransferase and cyclic phosphodiesterase activities. This mechanism bears a resemblance to the well-known two-step mechanism of pancreatic ribonuclease, RNase A.

Bacillus cereus↗
PubMed1990

Inhibition of phosphatidylinositol-specific phospholipase C by phosphonate substrate analogues.

Non-hydrolysable analogues of phosphatidylinositol were synthesized and tested as inhibitors of phosphatidylinositol-specific phospholipase C from Bacillus cereus. In these molecules, the phosphodiester bond of phosphatidylinositol hydrolyzed by the phospholipase was replaced by a phosphonate linkage and a simpler hydrophobic group replaced the diacylglycerol moiety. One of the phosphonates also contained a carboxylate functional group suitable for matrix attachment. All three synthetic phosphonates inhibited the phospholipase C activity in a concentration-dependent manner, with the analogue most closely resembling the structure of the natural substrate, phosphatidylinositol, being the most potent inhibitor. The data indicate that phosphonate analogues of phosphatidylinositol may be useful for study of phospholipase C and other proteins interacting with myo-inositol phospholipids.

Bacillus cereus↗
PubMed1990

Preparation and application of an affinity matrix for phosphatidylinositol-specific phospholipase C.

A non-hydrolyzable phosphonate analogue of phosphatidyl inositol, racemic myo-inosityl-(1)-5-oxa-16-trifluoroacetamidohexadecyl phosphonate, was synthesized. This phosphonate inhibited the activity of phosphatidyl inositol-specific phospholipase C (PI-PLC) from Bacillus cereus with an IC50 of approximately 10 mM. Removal of the trifluoroacetyl blocking group followed by covalent binding of the phosphonate to cyanogen bromide activated Sepharose 4B via the amino group produced an affinity matrix specific for the PI-PLC from B. cereus. This affinity matrix was used to purify the phospholipase C from a complex mixture of proteins in a single step. Competition experiments with myo-inositol in the elution medium indicated that specific binding of the enzyme to the matrix most likely involves the enzyme active site. The inositol phosphonate derivatized matrix was stable over several months in neutral and alkaline media and was used repeatedly without loss of binding capacity. These results show that affinity matrices employing myo-inositol phosphonate ligands are useful for isolation and binding studies of PI-PLC and possibly of other enzymes interacting with phosphoinositides or myo-inositol phosphate derivatives.

Chromatography, Affinity↗
PubMed1990

Synthesis of phosphonate derivatives of myo-inositol for use in biochemical studies of inositol-binding proteins.

Phospholipids containing the inositol headgroup (phosphoinositides) serve as membrane storage forms of a family of messenger molecules that transmit signals in cells. In this study a general synthesis of myo-inositol phosphate derivatives in which the phosphorus oxygen bond is replaced with a phosphorus carbon bond (i.e. phosphonates) is presented. Four specific examples of phosphonate analogs of phosphatidylinositol (PI) are prepared which have a single alkyl chain in place of the diacylglycerol. These derivatives are stable in neutral and alkaline solutions and are designed for use in biochemical studies of PI-specific phospholipases C and other enzymes involved in the phosphoinositide signal transduction pathway.

Chemical Phenomena↗