PubMed Health⌕ Search

Biomedical subjects

O Lambert

Publications and source records attributed to O Lambert.

At least 19 recordsLinked to original sources

FhuA-mediated phage genome transfer into liposomes: a cryo-electron tomography study.

BACKGROUND: The transfer of phage genomes into host cells is a well established but only dimly understood process. Following the irreversible phage binding to a receptor in the bacterial outer membrane, the DNA is ejected from the viral capsid and transferred across the bacterial cell envelope. In Escherichia coli, the mere interaction of the phage T5 with its outer membrane receptor, the ferrichrome transporter FhuA, is sufficient to trigger the release of the DNA from the phage capsid. Although the structure of FhuA has been determined at atomic resolution, the understanding of the respective roles of phage and bacterial proteins in DNA channeling and the mechanisms by which the transfer of the DNA is mediated remains fragmentary. RESULTS: We report on the use of cryo-electron tomography to analyze, at a molecular level, the interactions of T5 phages bound to FhuA-containing proteoliposomes. The resolution of the three-dimensional reconstructions allowed us to visualize the phage-proteoliposome interaction before and after release of the genome into the vesicles. After binding to its receptor, the straight fiber of the phage T5 (the "tip" of the viral tail made of pb2 proteins) traverses the lipid bilayer, allowing the transfer of its double-stranded DNA (121,000 bp) into the proteoliposome. Concomitantly, the tip of the tail undergoes a major conformational change; it shrinks in length (from 50 to 23 nm), while its diameter increases (from 2 to 4 nm). CONCLUSIONS: Taking into account the crystal structure of FhuA, we conclude that FhuA is only used as a docking site for the phage. The tip of the phage tail acts like an "injection needle," creating a passageway at the periphery of FhuA, through which the DNA crosses the membrane. A possible mechanistic scenario for the transfer of the viral genome into bacteria is discussed.

Bacterial Outer Membrane Proteins↗

Use of octyl beta-thioglucopyranoside in two-dimensional crystallization of membrane proteins.

A great interest exists in producing and/or improving two-dimensional (2D) crystals of membrane proteins amenable to structural analysis by electron crystallography. Here we report on the use of the detergent n-octyl beta-d-thioglucopyranoside in 2D crystallization trials of membrane proteins with radically different structures including FhuA from the outer membrane of Escherichia coli, light-harvesting complex II from Rubrivivax gelatinosus, and Photosystem I from cyanobacterium Synechococcus sp. We have analyzed by electron microscopy the structures reconstituted after detergent removal from lipid-detergent or lipid-protein-detergent micellar solutions containing either only n-octyl beta-d-thioglucopyranoside or n-octyl beta-d-thioglucopyranoside in combination with other detergents commonly used in membrane protein biochemistry. This allowed the definition of experimental conditions in which the use of n-octyl beta-d-thioglucopyranoside could induce a considerable increase in the size of reconstituted membrane structures, up to several micrometers. An other important feature was that, in addition to reconstitution of membrane proteins into large bilayered structures, this thioglycosylated detergent also was revealed to be efficient in crystallization trials, allowing the proteins to be analyzed in large coherent two-dimensional arrays. Thus, inclusion of n-octyl beta-d-thioglucopyranoside in 2D crystallization trials appears to be a promising method for the production of large and coherent 2D crystals that will be valuable for structural analysis by electron crystallography and atomic force microscopy.

Bacterial Outer Membrane Proteins↗

Structure of membrane-bound annexin A5 trimers: a hybrid cryo-EM - X-ray crystallography study.

Annexins constitute a family of phospholipid- and Ca(2+)-binding proteins involved in a variety of membrane-related processes. The property of several annexins, including annexin A5, to self-organize at the surface of lipid membranes into 2D ordered arrays has been proposed to be functionally relevant in cellular contexts. To further address this question, we investigated the high-resolution structure of annexin A5 trimers in membrane-bound 2D crystals by cryo-electron microscopy (Cryo-EM). A new 2D crystal form was discovered, with p32(1) symmetry, which is significantly better ordered than the 2D crystals reported before. A 2D projection map was obtained at 6.5 A resolution, revealing protein densities within each of the four domains characteristic of annexins. A quantitative comparison was performed between this structure and models generated from the structure of the soluble form of annexin A5 in pseudo-R3 3D crystals. This analysis indicated that both structures are essentially identical, except for small local changes attributed to membrane binding. As a consequence, and contrary to the common view, annexin A5 molecules maintain their bent shape and do not flatten upon membrane binding, which implies either that the four putative Ca(2+) and membrane-binding loops present different types of interaction with the membrane surface, or that the membrane surface is locally perturbed. We propose that the trimerization of annexin A5 molecules is the relevant structural change occurring upon membrane binding. The evidence that 2D arrays of annexin A5 trimers are responsible for its in vitro property of blood coagulation inhibition supports this conclusion.

Animals↗

Use of detergents in two-dimensional crystallization of membrane proteins.

Structure determination at high resolution is actually a difficult challenge for membrane proteins and the number of membrane proteins that have been crystallized is still small and far behind that of soluble proteins. Because of their amphiphilic character, membrane proteins need to be isolated, purified and crystallized in detergent solutions. This makes it difficult to grow the well-ordered three-dimensional crystals that are required for high resolution structure analysis by X-ray crystallography. In this difficult context, growing crystals confined to two dimensions (2D crystals) and their structural analysis by electron crystallography has opened a new way to solve the structure of membrane proteins. However, 2D crystallization is one of the major bottlenecks in the structural studies of membrane proteins. Advances in our understanding of the interaction between proteins, lipids and detergents as well as development and improvement of new strategies will facilitate the success rate of 2D crystallization. This review deals with the various available strategies for obtaining 2D crystals from detergent-solubilized intrinsic membrane proteins. It gives an overview of the methods that have been applied and gives details and suggestions of the physical processes leading to the formation of the ordered arrays which may be of help for getting more proteins crystallized in a form suitable for high resolution structural analysis by electron crystallography.

Crystallization↗

DNA delivery by phage as a strategy for encapsulating toroidal condensates of arbitrary size into liposomes.

We report a strategy for encapsulating and condensing DNA. When T5 phage binds to its membrane protein receptor, FhuA, its double stranded DNA (120,000 bp) is progressively released base pair after base pair in the surrounding medium. Using cryoelectron microscopy, we have visualized the structures formed after T5 phage DNA is released into neutral unilamellar proteoliposomes reconstituted with the receptor FhuA. In the presence of spermine, toroidal condensates of circumferentially wrapped DNA were formed. Most significantly, the sizes of these toroids were shown to vary, from 90 to 200 nm in their outer diameters, depending on the number of DNA stands transferred. We have also analyzed T5 DNA release in bulk solution containing the detergent-solubilized FhuA receptor. After DNA release in a spermine containing solution, huge DNA condensates with a diameter of about 300 nm were formed containing the DNAs from as many as 10-20 capsids. At alkaline pH, the condensates appeared as large hollow cylinders with a diameter of 200 nm and a height of 100-200 nm. Overall, the striking feature of our experiments is that, because of the progressive release of DNA from the phage capsid, the mechanism of toroid formation is fundamentally different from that in the classical studies in which highly dilute, "naked" DNA is condensed by direct addition of polyvalent cations; as a consequence, our method leads to toroids of arbitrary size.

Bacteriophages↗

Poly(ethylene carbonate) microspheres: manufacturing process and internal structure characterization.

The granulocyte-macrophage colony stimulating factor (GM-CSF), a water-soluble cytokine, was encapsulated in poly(ethylene carbonate) microspheres (MS) by a double emulsion w(1)/o/w(2) solvent evaporation method. Poly(ethylene carbonate) is a new polymer of high molecular weight (MW) and forms polymer matrices that are exclusively surface bioerodible. In the frame of this study, the influence of the polymer molecular weight and the polymer concentration in the organic phase on the physico-chemical characteristics of the microspheres were investigated. Ninety percent of the microspheres had a diameter ranging between 4 and 136 microm, with a mean value of 30 microm. The encapsulation ratios ranged from 2.22 to 2.51% (w/w) depending on the molecular weight of the polymer corresponding to an encapsulation efficiency of 70 to 100%, respectively. Independent of the polymer molecular weight used, the in vitro drug release was very low, ranging from 5.61 to less than 1% of the total encapsulated GM-CSF amount. Scanning electron microscopy (SEM) analysis showed microparticles with spherical shapes and smooth surfaces containing a few small globules. The inner structure of the microspheres appeared to consist of a polymeric matrix surrounding numerous globules. These globules have different sizes, shape and distribution in the polymeric matrix, depending on the concentration of the polymer solution and on the polymer molecular weight. In addition, it was demonstrated that the GM-CSF lowered the interfacial tension between the GM-CSF aqueous solution and the methylene chloride organic phase. The active critical concentration was as low as 0.008 mg/ml. It was therefore suggested that this particular behavior contributed to the stabilization of the primary emulsion during the formation of the microspheres, leading to rather high encapsulation efficiency.

Cell Division↗

An 8-A projected structure of FhuA, A "ligand-gated" channel of the Escherichia coli outer membrane.

The structure of FhuA, a siderophore and phage receptor in the outer membrane of Escherichia coli, has been investigated by electron crystallography. Bidimensional crystals of hexahistidine-tagged FhuA protein solubilized in N,N-dimethyldodecylamine-N-oxide were produced after detergent removal with polystyrene beads. Frozen-hydrated crystals (unit cell dimensions of a = 124 A, b = 98 A, gamma = 90 degrees ) exhibited a p22121 plane group symmetry. A projection map at 8 A resolution showed the presence of dimeric ring-like structures with an elliptical shape (48 x 40 A). Each monomer was composed of a ring of densities with a radial width of 8-10 A corresponding to a cylinder of beta sheets. Few densities are present inside the barrel, leaving a central channel approximately 25 A in diameter. A projection map of FhuA at 15 A resolution, which was calculated from negatively stained preparations, demonstrated that most of the central channel was masked by extramembrane domains. This map also revealed an asymmetric distribution of extramembrane domains in FhuA, with large domains located mainly on one side of the molecule. Comparison with density maps derived from recent atomic structure allowed further interpretation of the electron microscopy projection structures with regard to long hydrophilic loops governing the selectivity and opening of the channel.

Bacterial Outer Membrane Proteins↗

Two-dimensional crystallization on lipid layer: A successful approach for membrane proteins.

A considerable interest exists currently in designing innovative strategies to produce two-dimensional crystals of membrane proteins that are amenable to structural analysis by electron crystallography. We have developed a protocol for crystallizing membrane protein that is derived from the classical lipid-layer two-dimensional crystallization at the air/water interface used so far for soluble proteins. Lipid derivatized with a Ni(2+)-chelating head group provided a general approach to crystallizing histidine-tagged transmembrane proteins. The processes of protein binding and two-dimensional crystallization were analyzed by electron microscopy, using two prototypic membrane proteins: FhuA, a high-affinity receptor from the outer membrane of Escherichia coli, and the F(0)F(1)-ATP synthase from thermophilic Bacillus PS3. Conditions were found to avoid solubilization of the lipid layer by the detergent present with the purified membrane proteins and thus to allow binding of micellar proteins to the functionalized lipid head groups. After detergent removal using polystyrene beads, membrane sheets of several hundreds of square micrometers were reconstituted at the interface. High protein density in these membrane sheets allowed further formation of planar two-dimensional crystals. We believe that this strategy represents a new promising alternative to conventional dialysis methods for membrane protein 2D crystallization, with the additional advantage of necessitating little purified protein.

Bacterial Outer Membrane Proteins↗

The association of tranexamic acid and nimodipine in the pre-operative treatment of ruptured intracranial aneurysms.

In the scope of a late intervention policy on ruptured intracranial aneurysms, on D.+12 on an average, we first used tranexamic acid, at moderate doses: 3 g orally or 1.5 g intravenously per day. We, subsequently, added nimodipine, usually 240 mg orally per day or 2 mg intravenously per hour. The medical treatment consisted of amply sufficient hydration, and in systematic and regular administration of analgesics and sedatives. Hypotension was absolutely avoided; if necessary, an antihypertensive treatment was prescribed very cautiously. Phenytoin was regularly given. In the present study, we try to answer the following questions: (1) Can we confirm that the preventive action of tranexamic acid remains as effective, when doses, markedly lower than usually recommended, are used? (2) Does nimodipine prevent the increase of pre-operative ischaemic complications, which should be expected when tranexamic acid is administered? Amongst 101 patients with SAH of proven aneurysmal origin, 84 were treated with tranexamic acid and nimodipine. In 25 patients, an aneurysm was not visualised; 21 received this treatment. For several reasons, only a retrospective study was possible, to evaluate the results of our antifibrinolytic and calcium-blocking therapies, on rebleeding and pre-operative delayed ischaemia. We compared, therefore, similar cases from the literature, with our own cases, taking into consideration the clinical grades, the days of admission and of intervention, the moment of rebleeding and of delayed pre-operative ischaemia, etc. The following impressions emerge: (1) same effectiveness of moderate doses of tranexamic acid; (2) no increase of pre-operative delayed ischaemic complications, in comparison with patients not receiving antifibrinolytics but nimodipine; (3) important role of a devastating initial bleed and of operative complications; (4) difficulty of avoiding rebleeding at D.0, whatever the therapeutic measures, medical and/or surgical.

Adult↗

A new "gel-like" phase in dodecyl maltoside-lipid mixtures: implications in solubilization and reconstitution studies.

The interaction of dodecyl maltoside with lipids was investigated through the studies of solubilization and reconstitution processes. The solubilization of large unilamellar liposomes was analyzed through changes in turbidity and cryo-transmission electron microscopy. Solubilization was well described by the three-stage model previously reported for other detergents, and the critical detergent/phospholipid ratios at which lamellar-to-micellar transition occurred (Rsat = 1 mol/mol) and finished (Rsol = 1.6 mol/mol) were determined. The vesicle-micelle transition was further observed in the vitrified hydrated state by cryo-transmission electron microscopy. A striking feature of the solubilization process by dodecyl maltoside was the discovery of a new phase consisting of a very viscous "gel-like" sample. It is shown that this equilibrium cohesive phase is composed of long filamentous thread-like micelles, over microns in length. Similar structures were observed upon solubilization of sonicated liposomes, multilamellar liposomes, or biological Ca2+ ATPase membranes. This "gel-like" phase was also visualized during the process of liposome reconstitution after detergent removal from lipid-dodecyl maltoside micelles. The rate of detergent removal, controlled through the use of SM2 Bio-Beads, was demonstrated to drastically influence the morphology of reconstituted liposomes with a propensity for multilamellar liposome formation upon slow transition through the "gel-like" phase. Finally, on the basis of these observations, the mechanisms of dodecyl maltoside-mediated reconstitution of bacteriorhodopsin were analyzed, and optimal conditions for reconstitution were defined.

Calcium-Transporting ATPases↗

Protein-mediated DNA transfer into liposomes.

The transfer of a foreign genome into a bacterium by means of phage infection is a very efficient but poorly understood process. To analyse the mechanism of phage DNA transfer at a molecular level, we have reconstituted FhuA, the receptor for phage T5 in the outer membrane of Escherichia coli, into unilamellar vesicles made of natural phospholipids. Cryoelectron microscopy studies showed that the binding of the phage to FhuA triggered the transfer of its double-stranded DNA (121000 bp) into the proteoliposomes. DNA was entrapped within vesicles with a diameter ranging from 70 to 150 nm. The DNA appeared to be densely packed, but its presence did not alter the morphology of the liposomes, suggesting no DNA-lipid interactions. These liposomes represent an attractive model system for studying the mechanisms of DNA transport and condensation. They may also serve as alternative vehicles for the transfer of foreign genes into eukaryotic cells.

Bacterial Outer Membrane Proteins↗

Structural analysis of junctions formed between lipid membranes and several annexins by cryo-electron microscopy.

The (annexin II-p11)2 tetramer has been proposed to participate in exocytosis and several other members of the annexin superfamily have been reported to aggregate liposomes in vitro. In this context, the Ca2+-dependent binding of several annexins to chromaffin granules and liposomes was investigated by cryo-electron microscopy. The Ca2+-dependent aggregation of lipid membranes by (annexin II-p11)2 results from the spontaneous self-organization of the protein into two-dimensional plaques, which are visualized in projection as characteristic junctions. The junctions have a constant thickness of 210(+/-10) A and present a symmetrical distribution of electron-dense material arranged into seven stripes. They were observed over a wide range of Ca2+ concentrations, down to 2 microM. The molecular components corresponding to the seven electron-dense stripes were assigned as follows: the two associated membranes give rise to two outer stripes each and the three central stripes correspond to the (annexin II-p11)2 tetramer. Each annexin II molecule interacts with the outer lipid leaflet of one membrane, giving rise to one stripe, while the central stripe is due to the (p11)2 dimer with which both annexin II molecules interact. Both annexin II and annexin I also induced the Ca2+-dependent aggregation of liposomes via junctions that lack the central (p11)2 moiety and present only six high-density stripes. As expected, both annexin V and annexin III bind to liposomes without inducing their aggregation.

Animals↗

Three-dimensional reconstruction of Limulus polyphemus hemocyanin from cryoelectron microscopy.

Hemocyanin (Hc) the respiratory pigment of the horseshoe crab Limulus polyphemus (Lp) is composed of 48 approximately 75 kDa copper-containing subunits arranged in eight hexameric groups. In this study, we used the random conical tilt series method to do a three-dimensional (3D) reconstruction of Lp Hc observed in vitreous ice. This approach allowed the unambiguous determination of the handedness of the molecule. Lp Hc contains two superimposed 4 x 6mer structures possessing the same structural features as the other 4 x 6meric Hcs, namely flip and flop views and a rocking effect. Moreover, 3D fitting of the X-ray structure of subunit LpII with the reconstruction volume shows that the intra4 x 6meric contacts described in arthropod Hcs also occur within Limulus Hc. The two half-molecules composing the 8 x 6mer have their flop faces in contact (flop/flop association), the main links being formed by subunits LpIV. Model building shows that the flop/flop association is the only possible arrangement which allows the assembly of the whole particle. The two alternate constructions (flip/flop and flip/flip) are forbidden because of steric hindrance.

Algorithms↗

Three-dimensional reconstruction of the chlorocruorin of the polychaete annelid Eudistylia vancouverii.

The chlorocruorin of the polychaete Eudistylia vancouverii observed in the electron microscope in vitreous ice, was subjected to a three-dimensional (3D) reconstruction by the random conical tilt series method. The 3D volume with a resolution of 35 A reconstructed from 1062 images in top, side and intermediate view orientations has a D6 point-group symmetry. It possesses the characteristic hexagonal bilayer (HBL) appearance. Each hexagonal half-molecule comprises size hollow globular substructures (HGS) presumed to correspond to the dodecameric subunits. In projection, when the molecule is viewed along its 6-fold axis, the two halves are not perfectly eclipsed. The vertices of the upper hexagonal layer are 14 degrees rotated clockwise compared with those of the lower half. At a threshold displaying 100% of the expected molecular volume, the 3D volume contains in its center a flat hexagonal central mass disconnected from the rest of the volume. Several types of connections, termed c1 through c4, are visible between the HGSs. The c1 and c2 connections link the HGSs of the same hexagonal half-molecule. The c3 connections make a hexagonal inner bracelet linking the HGSs of each half-molecule. The c4 connections link pairs of HGSs superposed in the two hexagonal layers. Because of the half-molecules rotation around the 6-fold axis, the two HGSs linked by a c4 connection are not exactly superposed. It is proposed that the c3 and c4-connection bodies and less probably the flat central hexagonal mass are composed of chloroheme-deficient linker chains. When eroding the 3D volume by raising the threshold, the HGS appears composed of three elongated structures likely containing four globin chains. In addition, they show an approximate 3-fold symmetry. At high thresholds, two of these masses, dumbbell-shaped, separate into globular masses while the third structure remains compact as long as 1% of the molecular volume is displayed.

Animals↗

Three-dimensional reconstruction of Macrobdella decora (leech) hemoglobin by cryoelectron microscopy.

Macrobdella decora hemoglobin was observed in vitreous ice by cryoelectron microscopy and subjected to three-dimensional reconstruction by the method of random conical tilt series. The refined volume has a resolution of 40 A and a D6 point-group symmetry. Its architecture, with its hexagonal bilayer appearance, resembles those of Lumbricus terrestris (oligochaete) and Eudistylia vancouverii (polychaete). When the reconstruction volume is viewed along its sixfold axis, the vertices of the upper hexagonal layer are rotated 16 degrees clockwise compared to those of the lower layer. In agreement with the "bracelet" model of Vinogradov et al., a central linker complex is decorated by 12 hollow globular substructures. The linker complex is made up of a central hexagonal toroid linked by 12 c5 connections to two bracelets of c3 connections, which are themselves linked via six c4 connections. The portion of the hollow globular substructure corresponding to the dodecamer of globin chains has a local pseudo threefold symmetry and is composed of three elongated structures visible when the volume is displayed at high threshold. The main difference between Macrobdella, Lumbricus, and Eudistylia hemoglobins is the presence in Macrobdella of a central hexagonal toroid instead of a compact flat hexagonal structure.

Animals↗

Three-dimensional reconstruction of the hemocyanin of the protobranch bivalve mollusc Nucula hanleyi from frozen-hydrated specimens.

The didecameric hemocyanin of the bivalve mollusc Nucula hanleyi, observed in the electron microscope in vitreous ice, was subjected to a three-dimensional (3D) reconstruction by the random conical tilt series method. The 3D volume was analyzed by computing solid-body surface representations and slices through the volume and by eroding the structure progressively. The molecule was reconstructed from 288 and 63 images in the side- and end-on view orientations, respectively. It comprises three parts: one cylindrical wall composed of 10 oblique wall units and two collar complexes located at both ends of the cylinder and made up each of five arches and one annular collar. Erosion of the volume reveals that the wall looks like a segment of a five-stranded right-handed helix and that each oblique wall unit resembles a figure 8 inclined to the right. The 3D volumes reconstructed from Helix pomatia and N. hanleyi hemocyanins look perfectly similar, except that when the threshold is expressed as a function of the molecular volume left apparent, the various connections between the wall, the arches, and the collar disappear at a lower threshold in N. hanleyi than in H. pomatia. Conversely, with thresholds expressed as a fraction of the dynamic range of the 3D volume, the two structures are quite similar. This behavior means either that the molecular weights of Helix and Nucula hemocyanins (and therefore their molecular volumes) are not so different as indicated in the literature or that all the portions of Nucula hemocyanin have molecular weights lower than those of Helix hemocyanins.

Animals↗

Three-dimensional reconstruction of the alpha D and beta C-hemocyanins of Helix pomatia from frozen-hydrated specimens.

The three-dimensional (3D) reconstructions of the di-decameric forms of alpha D and beta C-hemocyanins of the Roman snail Helix pomatia and of the decameric half molecules of alpha D-hemocyanin were carried out on frozen-hydrated specimens observed in the electron microscope by using the random conical tilt series method. The three 3D volumes were examined by computing solid-body surface representations and slices through the volume and by eroding the structure progressively through raising of the threshold. The di-decameric molecule of alpha D and beta C-hemocyanins, reconstructed from side views, are very similar and are composed of a cylindrical wall, comprising ten oblique wall units, and of two collar complexes located at both ends of the cylinder, comprising each five arches and an annular collar made up of five collar units. Erosion of the structure reveals that the wall looks like a segment of a five-stranded right-handed helix and that each oblique wall unit resembles a figure 8 inclined to the right. The decameric half molecule of alpha D-hemocyanin, reconstructed from end-on views, resembles the whole molecule, except that the collar is thinner and appears composed of five independent collar complex units. It is suggested that the difference in structural appearance of the collar complex between the whole and the half alpha D-hemocyanin may be due to the missing cone artifact, induced by the angular limitations imposed by the goniometer of the electron microscope. The comparison between the alpha D-hemocyanin and the beta C-di-decameric hemocyanin at high thresholds suggests that in the beta C-hemocyanin the oblique wall units of each half molecule may be linked by two connections, whereas in alpha D-hemocyanin there may be only one. This difference in the number of connections may be responsible for the lower stability of the alpha D molecule at high salt concentration.

Animals↗

Three-dimensional reconstruction of Sepia officinalis hemocyanin from frozen-hydrated specimens.

The three-dimensional reconstruction of Sepia hemocyanin from randomly oriented native molecules was carried out by the method of the random conical tilt series on a frozen-hydrated specimen. As other molluscan hemocyanins, the molecule resembles a hollow cylinder or pentahedron composed of five dimeric subunits. Each dimeric subunit, composed of 16 functional units, comprises one wall oblique unit made up of 12 functional units and one arch made up of four functional units. The five wall oblique units are separated from each other by five oblique clefts bridged by the five arches, formerly termed collar structures. Each arch is composed of two types of functional units that are probably Soe, a functional unit absent in Octopus hemocyanin, and Soh, the C-terminal functional unit of the polypeptide chain. The architecture of the arches and their intramolecular location in front of the edges of the pentahedron are strongly reminiscent of the arches of Octopus hemocyanin. The D5 point-group symmetry of the molecule suggests that the orientation of the polypeptide chains is antiparallel as in Octopus hemocyanin. Several models of architecture compatible with these results are designed.

Animals↗