Biomedical subjects

Oliver S Smart

Publications and source records attributed to Oliver S Smart.

8 recordsLinked to original sources

PubMed2004

A stable miniature protein with oxaloacetate decarboxylase activity.

An 18-residue miniature enzyme, Apoxaldie-1, has been designed, based on the known structure of the neurotoxic peptide apamin. Three lysine residues were introduced on the solvent-exposed face of the apamin alpha-helix to serve as an active site for decarboxylation of oxaloacetate. The oxidised form of Apoxaldie-1, in which two disulfide bonds stabilise the alpha-helix, formed spontaneously. CD spectroscopy measurements revealed that, in its oxidised form, Apoxaldie-1 adopted a stably folded structure, which was lost upon reduction of the disulfide bonds. Despite its small size and the absence of a designed binding pocket, Apoxaldie-1 displayed saturation kinetics in its oxidised form and catalysed the decarboxylation of oxaloacetate at a rate that was almost four orders of magnitude faster than that observed with n-butylamine. This rivals the performance of the best synthetic oxaloacetate decarboxylases reported to date. Unlike those, however, Apoxaldie-1 displayed significant stability. It maintained its secondary structure at temperatures in excess of 75 degrees C, in the presence of high concentrations of guanidinium chloride and at pH values as low as 2.2. Apamin-based catalysts have potential for the generation of miniature peptides that display activity under nonphysiological conditions.

Amino Acid Sequence↗

PubMed2004

Controlling the DNA binding specificity of bHLH proteins through intramolecular interactions.

Reversible control of the conformation of proteins was employed to probe the relationship between flexibility and specificity of the basic helix-loop-helix protein MyoD. A fusion protein (apaMyoD) was designed where the basic DNA binding helix of MyoD was stablized by an amino-terminal extension with a sequence derived from the bee venom peptide apamin. The disulfide-stabilized helix from apamin served as a nucleus for a helix that extended for a further ten residues, thereby holding apaMyoD's DNA recognition helix in a predominantly alpha-helical conformation. The thermal stability of the DNA complexes of apaMyoD was increased by 13 degrees C relative to MyoD-bHLH. Measurements of the fluorescence anisotropy change on DNA binding indicated that apaMyoD bound to E-box-containing DNA sequences with enhanced affinity relative to MyoD-bHLH. Consequently, the DNA binding specificity of apaMyoD was increased 10-fold.

Amino Acid Sequence↗

PubMed2003

Prevention of peptide fibril formation in an aqueous environment by mutation of a single residue to Aib.

The behavior of a number of 16 residue polypeptides with a sequence Acetyl-EACARXZAACEAAARQ-amide, where X = V or A and Z = A or Aib, is studied under aqueous conditions. It is shown that the substitution of a single alanine residue by alpha-aminoisobutyric acid (Aib) completely alters both the conformation and the aggregation properties of the peptides. The Ala-Ala (X,Z = A,A) peptide is shown by circular dichroism and FTIR methods to adopt a predominately beta-sheet conformation. Furthermore, the peptide has limited solubility and is shown to form fibrils by electron microscopy and thioflavin T binding assays. In contrast, a single substitution at the center of peptide of alanine to Aib (X,Z = A,Aib) completely abolishes fibril formation and alters the conformation to a mixture of random coil and alpha-helix. The results show that Aib is a strong beta-sheet disrupter that is also able to adopt a helical conformation. This is linked to its role in peptaibol antibiotics. Aib provides an attractive alternative to proline and other substitutions in producing peptide variants with a lower tendency to produce fibril aggregates.

Aminoisobutyric Acids↗

PubMed2003

Achieving photo-control of protein conformation and activity: producing a photo-controlled leucine zipper.

We have recently developed a technique that has great potential in producing proteins with photo-control of conformation and consequently activity (J. R. Kumita, O. S. Smart and G. A. Woolley, Proc. Natl. Acad. Sci. U. S. A., 2000, 97, 3803-3808). The method is based on incorporating two cysteine residues into the sequence of a polypeptide. An azobenzene derivative is subsequently used to produce an intramolecular cross-link between the cysteine sulfhydryl groups. In previous work photo-isomerisation of the azobenzene moiety has been used to control the helicity of a monomeric peptide. In the experiments described here this method has been applied to the coiled coil leucine zipper peptide GCN4-p1. The aim was to produce a variant of GCN4-p1 whose helicity and consequently dimerisation is under direct photo-control. We have produced a modified GCN4-p1 incorporating two cysteine residues. The mutations introduced are shown to interfere with the ability of the uncross-linked peptide to form a coiled coil. After the peptide was cross-linked with the azobenzene derivative more normal coiled-coil behaviour was restored. Irradiation of the peptide producing a conformational change in the azobenzene cross-linker was accompanied by an increase in the helicity of the peptide. The work presented here highlights the potential of the use of photo-isomerisable cross-linkers to control protein activity through induced conformational change. In addition, the methodology has the potential to provide a fast trigger for the initiation of protein conformational changes.

Azo Compounds↗

PubMed2002

Using an azobenzene cross-linker to either increase or decrease peptide helix content upon trans-to-cis photoisomerization.

Reversible photocontrol of peptide and protein conformation could prove to be a powerful tool for probing function in diverse biological systems. Here, we report reversible photoswitching of the helix content in short peptides containing an azobenzene cross-linker between cysteine residues at positions i, i + 4, or i, i + 11 in the sequence. Trans-to-cis photoisomerization significantly increases the helix content in the i, i + 4 case and significantly decreases the helix content in the i, i + 11 case. These cross-linker designs significantly expand the possibilities for photocontrol of peptide and protein structure.

Azo Compounds↗

PubMed2002

Inhibition of SERCA Ca2+ pumps by 2-aminoethoxydiphenyl borate (2-APB). 2-APB reduces both Ca2+ binding and phosphoryl transfer from ATP, by interfering with the pathway leading to the Ca2+-binding sites.

2-Aminoethoxydiphenyl Borate (2-APB) has been extensively used recently as a membrane permeable modulator of inositol-1,4,5-trisphosphate-sensitive Ca2+ channels and store-operated Ca2+ entry. Here, we report that 2-APB is also an inhibitor of sarco/endoplasmic reticulum Ca2+-ATPase (SERCA) Ca2+ pumps, and additionally increases ion leakage across the phospholipid bilayer. Therefore, we advise caution in the interpretation of results when used in Ca2+ signalling experiments. The inhibition of 2-APB on the SERCA Ca2+ pumps is isoform-dependent, with SERCA 2B being more sensitive than SERCA 1A (IC50 values for inhibition being 325 and 725 micro m, respectively, measured at pH 7.2). The Ca2+-ATPase is also more potently inhibited at lower pH (IC50 = 70 micro m for SERCA1A at pH 6). 2-APB decreases the affinity for Ca2+ binding to the ATPase by more than 20-fold, and also inhibits phosphoryl transfer from ATP (by 35%), without inhibiting nucleotide binding. Activity studies performed using mutant Ca2+-ATPases show that Tyr837 is critical for the inhibition of activity by 2-APB. Molecular modeling studies of 2-APB binding to the Ca2+ ATPase identified two potential binding sites close to this residue, near or between transmembrane helices M3, M4, M5 and M7. The binding of 2-APB to these sites could influence the movement of the loop between M6 and M7 (L6-7), and reduce access of Ca2+ to their binding sites.

Adenosine Triphosphate↗

PubMed2002

Photo-control of peptide helix content by an azobenzene cross-linker: steric interactions with underlying residues are not critical.

Photo-control of protein conformation could prove useful for probing function in diverse biological systems. Recently, we reported photo-switching of helix content in a short peptide containing an azobenzene cross-linker between cysteine residues at positions i and i + 7 in the sequence. In the original sequence, underlying residues at positions i + 3 and i + 4 were made bulky as preliminary modelling suggested that this would enhance photo-control of helix content. To test this hypothesis, peptides with Val, Aib; Ile, Aib; and Ala, Ala at positions i + 3 and i + 4 were synthesized, cross-linked and characterized. Before cross-linking, the peptides show distinct conformational behaviours: two with differing helix/coil mixtures whereas the other has a circular dichroism (CD) spectrum characteristic of beta-sheet and a tendency to aggregate. However, upon cross-linking the peptides have very similar CD spectra: predominantly random coil in the dark but predominantly helical upon irradiation. These results refute the original hypothesis. Steric interactions between the linker and underlying residues do not appear to be critical for photo-switching behaviour. When the cross-linking bridge is lengthened by replacing the i, i + 7 cysteine residues with homocysteine, a lower degree of photo-control of helicity is observed. Furthermore, a non-cross-linking version of the azobenzene reagent is shown not to produce any photo-control of helicity. We conclude that the intramolecular cross-link is essential for photo-switching and that it should be applicable to a wide range of peptides and proteins.

Amino Acid Sequence↗

PubMedDate not supplied

A water-soluble azobenzene cross-linker for photocontrol of peptide conformation.

We have designed and synthesized a water-soluble, sulfonated version of an azobenzene-based thiol-reactive cross-linker that can be introduced into peptides and proteins and act as a conformational photoswitch. The sulfonated compound is shown to effect a similar degree of conformational control on a model peptide helix system, as its nonsulfonated counterpart but can be introduced without the need for any organic cosolvent. The sulfonated azobenzene cross-linker thus expands the range of proteins to which photocontrol can be applied.

Amino Acid Sequence↗