Biomedical subjects

Olivier Gauthier

Publications and source records attributed to Olivier Gauthier.

8 recordsLinked to original sources

PubMed2006

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

Patients with osteoporosis and joint disabilities represent a constant growing and challenging population to be treated in the musculoskeletal clinical field. Especially in the case of total hip arthroplasty, new solutions should be developed to compensate for the double negative factors, peri-implant osteolysis, and osteoporotic bone loss, affecting the quality of implant outcome. The goal of this study was then to establish a proof of concept for orthopedic implant used as Zoledronate delivery in osteoporotic rats, and in particular, to verify if this approach could increase the initial implant stability. Twenty-five female 6-month-old Wistar rats were ovariectomized 6 weeks before the implantation to induce osteoporosis. The animals were randomly separated in five groups representing the different Zoledronate concentrations in the HA coating: 0, 0.2, 2.1, 8.5, and 16 microg/implant. Histomorphometric measures and peri-implant bone volume fraction were assessed and mechanical stability tests were performed. Bone volume fraction and biomechanical results clearly illustrate the positive effect of Zoledronate coated implants in the osteoporotic rats. A remarkable result was to show the existence of a window of Zoledronate content (0.2 to 8.5 microg/implant) in which the mechanical fixation of the implant increased. We were able to establish the proof of concept for orthopedic implants used as a drug delivery system in osteoporotic rats. The local bisphosphonate delivery from a calcium phosphate coating allowed increase of the mechanical fixation of an orthopedic implant. This study shows that orthopedic implants containing bisphosphonates could be beneficial for osteoporotic patients in need of a total joint replacement.

Animals↗

PubMed2006

Bone repair using a new injectable self-crosslinkable bone substitute.

A new injectable and self-crosslinkable bone substitute (IBS2) was developed for filling bone defects. The IBS2 consisted of a chemically modified polymer solution mixed with biphasic calcium phosphate (BCP) ceramic particles. The polymer hydroxypropylmethyl cellulose was functionalized with silanol groups (Si-HPMC) and formed a viscous solution (3 wt %) in alkaline medium. With a decrease in pH, self-hardening occurred due to the formation of intermolecular -Si-O- bonds. During setting, BCP particles, 40 to 80 microm in diameter, were added to the polymer solution at a weight ratio of 50/50. The resulting injectable material was bilaterally implanted into critically sized bone defects at the distal femoral epiphyses of nine New Zealand White rabbits. The IBS2 filled the bone defects entirely and remained in place. After 8 weeks, bone had grown centripetally and progressed towards the center of the defects. Newly formed bone, ceramic, and nonmineralized tissue ratios were 24.6% +/- 5.6%, 21.6% +/- 5.8%, and 53.7% +/- 0.1%, respectively. Mineralized and mature bone was observed between and in contact with the BCP particles. The bone/ceramic apposition was 73.4% +/- 10.6%. The yield strength for the IBS2-filled defects was 16.4 +/- 7.2 MPa, significantly higher than for the host trabecular bone tissue (2.7 +/- 0.4 MPa). This study showed that BCP particles supported the bone healing process by osteoconduction while the Si-HPMC hydrogel created intergranular space for bone ingrowth. This new injectable and self-crosslinkable bone substitute could be used conveniently in orthopedic surgery for filling critical-size bone defects.

Animals↗

PubMed2005

Novel biomaterials for bisphosphonate delivery.

One type of gem-bisphosphonate (Zoledronate) has been chemically associated onto calcium phosphate (CaP) compounds of various compositions. For that purpose, CaP powders of controlled granulometry have been suspended in aqueous Zoledronate solutions of variable concentrations. Using mainly (31)P NMR spectroscopy, two different association modes have been observed, according to the nature of the CaP support and/or the initial concentration of the Zoledronate solution. beta-tricalcium phosphate (beta-TCP) and mixtures of hydroxyapatite and beta-TCP (BCPs) appear to promote Zoledronate-containing crystals formation. On the other hand, at concentrations <0.05 mol l(-1) CDAs (calcium deficients apatites) seem to undergo chemisorption of the drug through a surface adsorption process, due to PO(3) for PO(4) exchange, that is well described by Freundlich equations. At concentrations >0.05 mol l(-1), crystalline needles of a Zoledronate complex form onto the CDAs surface. The ability of such materials to release Zoledronate, resulting in the inhibition of osteoclastic activity, was shown using a specific in vitro bone resorption model.

Animals↗

PubMed2005

In vivo bone regeneration with injectable calcium phosphate biomaterial: a three-dimensional micro-computed tomographic, biomechanical and SEM study.

This in vivo study investigated the efficiency of an injectable calcium phosphate bone substitute (IBS) for bone regenerative procedures through non-destructive three-dimensional (3D) micro-tomographic (microCT) imaging, biomechanical testing with a non-destructive micro-indentation technique and 2D scanning electron microscopy (SEM) analysis. The injectable biomaterial was obtained by mixing a biphasic calcium phosphate (BCP) ceramic mineral phase and a cellulosic polymer. The BCP particles were 200-500 microm or 80-200 microm in diameter. The injectable material was implanted for 6 weeks into critical-sized bone defects at the distal end of rabbit femurs. Extensive new bone apposition was noted with both 2D and 3D techniques. Micro-CT showed that newly formed bone was in perfect continuity with the trabecular host bone structure and demonstrated the high interconnectivity of the restored bone network. For both IBS formulations, SEM and microCT gave very close measurements. The only detected significant difference concerned the amount of newly formed bone obtained with IBS 80-200 that appeared significantly higher with microCT analysis than with SEM (p=0.00007). Student t-tests did not show any significant difference in the amount of newly formed bone and remaining ceramic obtained from microCT analysis or SEM. Regression analysis showed satisfactory correlation between both the amount of newly formed bone and remaining ceramic obtained from microCT or SEM. For IBS 200-500, the newly formed bone rate inside the defect was 28.0+/-5.2% with SEM and yield strength of the samples was 18.8+/-5.4 MPa. For IBS 80-200, the newly formed bone rate inside the defect was 31.7+/-5.1% with SEM and yield strength of the samples was 26.8+/-4.5 MPa. Yield strength appeared well correlated with the amount of newly formed bone, specially observed with microCT. This study showed the ability of non-destructive techniques to investigate biological and mechanical aspects of bone replacement with injectable biomaterials.

Animals↗

PubMed2005

Calcium phosphate scaffold and bone marrow for bone reconstruction in irradiated area: a dog study.

Squamous cell carcinomas (SCC) of the upper aero-digestive tract are characterized by a high incidence of bone invasion; their treatment often requires large and damaging surgical resections and radiotherapy. Surgical and radiotherapeutic procedures generate irreversible effects on normal tissues, involving injuries on their reparation properties, especially on bone. The quality of life of patients undergoing major surgery and radiotherapy in maxillary and mandible areas is often reduced but could be improved by bone reconstructions. Bone reconstructions are rarely performed because surgery is complex and unsafe in irradiated bone. The aim of the study was to evaluate the bone reconstruction possibilities of macroporous biphasic calcium phosphate (MBCP) associated to autologous bone marrow (BM) graft injected after irradiation. MBCP hollowed blocks were specially designed and implanted in tibia and femur bone before irradiation in a dog model. Implants were removed after 18 weeks. This is the first report of experiments performed after radiation delivery using high fractionated doses approximating usual treatment of SCC in human. The quality of the bone adjacent to implanted MBCP and the bone ingrowth's rates were evaluated. The qualitative and quantitative role of BM grafts associated with the MBCP implants was determined, using scanning electron microscopy linked to quantitative image analysis. A direct contact between newly formed bone and MBCP implants associated to BM graft was observed, without fibrous interposition. The new-bone formation was statistically increased inside the MBCP (P=0.0126) by BM grafts. This study demonstrates that BM graft added to MBCP constitute an appropriate material to be considered in case of bone defect occurring in irradiated tissue, and could be foreseen for use after bone removal for oncologic obligations.

Animals↗

PubMed2005

Ectopic bone formation by microporous calcium phosphate ceramic particles in sheep muscles.

Calcium phosphate ceramics are widely used in bone reconstructive surgery because of their osteconductive properties. However, these materials generally lack osteoinductive properties required to support bone healing in large defects. In this article, we study the osteoinductive potential of calcium phosphate ceramic particles implanted for 6 months into the dorsal muscles of eight adult female sheep. Microporous biphasic calcium phosphate (MBCP) granules of 1-2 mm composed of hydroxyapatite and beta-tricalcium phosphate (60/40) had macropores of 450 microm, micropores of 0.43 microm, and a specific surface area of 1.8 m(2)/g. After 6 months in the back muscles of sheep, the explants composed of MBCP granules were hard and encapsulated by normal muscle tissue. Ectopic bone formation with Haversian structures was observed in close contact with the MBCP granules in histological sections. Back-scattered electron microscopy and micro-computed tomography indicated that approximately 10% of well-mineralized bone with mature osteocytes had formed between or upon the granules. The ectopic bone showed trabeculae bridging the MBCP granules. Both the number and thickness of the trabeculae formed between the MBCP particles were comparable to those measured in spongious bone. The overall results therefore confirmed the presence of mature bone after intramuscular implantation of MBCP granules. The different hypotheses explaining ectopic bone formation induced by MBCP granules are discussed. Synthetic bone substitutes with osteoinductive properties could be used in bone reconstructive surgery.

Animals↗

PubMed2004

Alveolar bone regeneration for immediate implant placement using an injectable bone substitute: an experimental study in dogs.

BACKGROUND: The aim of the present study was to assess the efficacy of a ready-to-use injectable bone substitute for bone regeneration around dental implants placed into fresh extraction sockets. METHODS: Third and fourth mandibular premolars were extracted from three beagle dogs and the interradicular septa were surgically reduced to induce a mesial bone defect. Thereafter, titanium implants were immediately placed. On the left side of the jaw, mesial bone defects were filled with an injectable bone substitute (IBS), obtained by combining a polymer and biphasic calcium phosphate ceramic granules. The right defects were left unfilled as controls. After 3 months of healing, specimens were prepared for histological and histomorphometric evaluations. RESULTS: No post-surgical complications were observed during the healing period. In all experimental conditions, histological observations revealed a lamellar bone formation in contact with the implant. Histomorphometric analysis showed that IBS triggers a significant (P<0.05) increase in terms of the number of threads in contact with bone, bone-to-implant contact, and peri-implant bone density of approximately 8.6%, 11.0%, and 14.7%, respectively. In addition, no significant difference was observed when number of threads, bone-to-implant contact, and bone density in the filled defects were compared to the no-defect sites. CONCLUSION: It is concluded that an injectable bone substitute composed of a polymeric carrier and calcium phosphate significantly increases bone regeneration around immediately placed implants.

Alveolar Process↗

PubMed2002

[Non-invasive evaluation of an injectable bone substitute].

Despite the increasing number of techniques for the preservation of bone ridges after dental avulsion, no precise evaluation of alveolar filling has been performed to date. The criteria of available measurement techniques (probes, retroalveolar or panoramic radiography, and lateral teleradiography) are not sufficiently reliable and precise. This study investigated the reliability of evaluation based on CT images in comparison with retroalveolar radiography (the most precise radiographic technique, providing standardised images), direct measurements, and images obtained in scanning electron microscopy. After a preliminary investigation ex vivo, a study was performed in vivo on three beagles. Mandibular premolars were extracted, and the corresponding alveoli were filled with an injectable bone substitute composed of a calcium phosphate mineral load associated with hydroxypropyl methylcellulose. Measurements performed on CT images relative to visual and automatic detection of density changes and studies of density curves provided better precision than those obtained by retroalveolar radiography.

Animals↗