Biomedical subjects

Olle Holst

Publications and source records attributed to Olle Holst.

12 recordsLinked to original sources

PubMed2006

Characterisation of two novel cyclodextrinases using on-line microdialysis sampling with high-performance anion exchange chromatography.

In this work, a real-time sampling/analytical method for on-line measurements of two newly discovered cyclomaltodextrinases (CDases) has been developed and evaluated. This novel methodology not only allows the final products to be investigated, but it also reveals enzyme-specific differences in the degradation pathways during the hydrolysis of different substrates, which is a great advantage in the important tasks of investigating the mechanisms of and classifying new hydrolases, and is an advantage that conventional techniques cannot offer. Two different enzymes, one CDase from Laceyella sacchari (LsCda13) and one from Anoxybacillus flavithermus (AfCda13), were investigated during the hydrolysis of alpha-, beta- and gamma-cyclodextrin, and the hydrolysis products were sampled via a microdialysis probe and injected on-line every 30 min into a high-performance anion exchange chromatography system equipped with a pulsed amperometric detector (HPAEC-PAD), where they were identified. The enzymes yielded the same end-products, maltose and glucose, in an approximate molar ratio of 2:1, but they exhibited distinctly different patterns of intermediate product formation before reaching the end-point. LsCda13 had a more random distribution of the intermediate products, whereas AfCda13 showed the distinct intermediate production of maltotriose, which in some cases accumulated.

Anion Exchange Resins↗

PubMed2006

Evolution of a carbohydrate binding module into a protein-specific binder.

A carbohydrate binding module, CBM4-2, derived from the xylanase (Xyn 10A) of Rhodothermus marinus has been used as a scaffold for molecular diversification. Its binding specificity has been evolved to recognise a quite different target, a human monoclonal IgG4. In order to understand the basis for this drastic change in specificity we have further investigated the target recognition of the IgG4-specific CBMs. Firstly, we defined that the structure target recognised by the selected CBM-variants was the protein and not the carbohydrates attached to the glycoprotein. We also identified key residues involved in the new specificity and/or responsible for the swap in specificity, from xylan to human IgG4. Specific changes present in all these CBMs included mutations not introduced in the design of the library from which the specific clones were selected. Reversion of such mutations led to a complete loss of binding to the target molecule, suggesting that they are critical for the recognition of human IgG4. Together with the mutations introduced at will, they had transformed the CBM scaffold into a protein binder. We have thus shown that the scaffold of CBM4-2 is able to harbour molecular recognition for either carbohydrate or protein structures.

Amino Acid Sequence↗

PubMed2005

The methylotrophic yeast Pichia pastoris as a host for the expression and production of thermostable xylanase from the bacterium Rhodothermus marinus.

A thermostable glycoside hydrolase family-10 xylanase originating from Rhodothermus marinus was cloned and expressed in the methylotrophic yeast Pichia pastoris (SMD1168H). The DNA sequence from Rmxyn10A encoding the xylanase catalytic module was PCR-amplified and cloned in frame with the Saccharomyces cerevisiae alpha-factor secretion signal under the control of the alcohol oxidase (AOX1) promotor. Optimisation of enzyme production in batch fermentors, with methanol as a sole carbon source, enabled secretion yields up to 3gl(-1) xylanase with a maximum activity of 3130Ul(-1) to be achieved. N-terminal sequence analysis of the heterologous xylanase indicated that the secretion signal was correctly processed in P. pastoris and the molecular weight of 37kDa was in agreement with the theoretically calculated molecular mass. Introduction of a heat-pretreatment step was however necessary in order to fold the heterologous xylanase to an active state, and at the conditions used this step yielded a 200-fold increase in xylanase activity. Thermostability of the produced xylanase was monitored by differential-scanning calorimetry, and the transition temperature (T(m)) was 78 degrees C. R. marinus xylanase is the first reported thermostable gram-negative bacterial xylanase efficiently secreted by P. pastoris.

Amino Acid Sequence↗

PubMed2005

Optimized expression of soluble cyclomaltodextrinase of thermophilic origin in Escherichia coli by using a soluble fusion-tag and by tuning of inducer concentration.

Cyclomaltodextrinases are multidomain and often dimeric proteins from the alpha-amylase family (glycoside hydrolase family 13) which frequently have been very difficult to express in active form in Escherichia coli. To express the soluble form of this type of proteins in larger quantities the expression has to be optimized. We have used and combined two strategies to increase the yield of soluble recombinant cyclomaltodextrinase expressed from a gene originating from the thermophilic Gram-positive bacterium Anoxybacillus flavithermus. One strategy involved tuning of the inducer concentration while the other involved fusion of the gene encoding the target protein to the gene encoding the solubility-enhancing protein NusA. The enzyme activity could be increased 6-7 times solely by finely tuning the IPTG concentration, but the activity level was very sensitive to the amount of inducer applied. Hence, the IPTG concentration may have to be optimized for every protein under the conditions used. The fusion protein-strategy gave a slightly lower total activity but the level of soluble recombinant protein obtained was in this case significantly less sensitive to the inducer concentration applied. Moreover, the activity could be increased about 2-fold by cleaving off the solubility-tag (NusA) by enterokinase.

Cloning, Molecular↗

PubMed2005

Two novel cyclodextrin-degrading enzymes isolated from thermophilic bacteria have similar domain structures but differ in oligomeric state and activity profile.

In this paper, we present the expression and characterization of two novel enzymes from the alpha-amylase family exhibiting cyclomaltodextrinase specificity. The nucleotide sequences encoding the enzymes were isolated from the genomic DNA of two thermophilic bacterial strains originating from Icelandic hot springs and belonging to the genera Anoxybacillus (AfCda13) and Laceyella (LsCda13). The genes were amplified using a consensus primer strategy utilizing two of the four conserved regions present in glycoside hydrolase family 13. No identifiable signal peptides were present in open reading frames encoding the enzymes, indicating an intracellular location of both enzymes, and their physiological function to be intracellular cyclodextrin degradation. The domain structures of both enzymes were also similar, including an N-terminal domain, the catalytic module composed of the A- and B-domains, and a C-terminal domain. Despite the similarity in domain composition, the two enzymes displayed differences in the oligomeric state with AfCda13 being a dimeric protein, whereas LsCda13 was monomeric. The two enzymes also displayed significantly different activity profiles, despite being active on the same range of substrates. It was shown that the enzyme displaying the highest activity on cyclodextrin was dimeric (AfCda13). Moreover, a fraction of the dimeric enzyme could be converted to a monomeric state in the presence of KCl and this fraction retained only 23% of its activity on alpha-cyclodextrin while its activity on starch was not significantly affected, indicating that the oligomeric state is an important factor for a high activity on cyclodextrin substrates.

Amino Acid Sequence↗

PubMed2005

Effect of postinduction nutrient feed composition and use of lactose as inducer during production of thermostable xylanase in Escherichia coli glucose-limited fed-batch cultivations.

Escherichia coli is a microorganism routinely used in the production of heterologous proteins. The overexpression of a xylanase (Xyn 10 A Delta NC), which originated from the thermophile Rhodothermus marinus cloned under the control of the strong T7/lac promoter in a defined medium (mAT) using a substrate-limited feed strategy, was however shown to impose a significant metabolic burden on host cells. This resulted in a decreased cell growth rate and ultimately also a decreased target protein production. The investigation hence centers on the effect of some selected nutrient feed additives (amino acid [Cys] or TCA-intermediates [citrate, succinate, malate]) used to relieve the metabolic burden imposed during the feeding and postinduction phases of these glucose-limited fed-batch cultivations. The use of either succinic acid or malic acid as feed-additives resulted in an increase in production of approximately 40% of the heterologous thermostable xylanase. Furthermore, use of lactose as an alternative inducer of the T7/lac promoter was also proven to be a suitable strategy that significantly prolonged the heterologous protein production phase as compared with induction using isopropyl beta-D-thiogalactopyranoside (IPTG).

Bioreactors↗

PubMed2004

The modular xylanase Xyn10A from Rhodothermus marinus is cell-attached, and its C-terminal domain has several putative homologues among cell-attached proteins within the phylum Bacteroidetes.

Until recently, the function of the fifth domain of the thermostable modular xylanase Xyn10A from Rhodothermus marinus was unresolved. A putative homologue to this domain was however identified in a mannanase (Man26A) from the same microorganism which raised questions regarding a common function. An extensive search of all accessible data-bases as well as the partially sequenced genomes of R. marinus and Cytophaga hutchinsonii showed that homologues of this domain were encoded by multiple genes in microorganisms in the phylum Bacteroidetes. Moreover, the domain occurred invariably at the C-termini of proteins that were predominantly extra-cellular/cell attached. A primary structure motif of three conserved regions including structurally important glycines and a proline was also identified suggesting a conserved 3D fold. This bioinformatic evidence suggested a possible role of this domain in mediating cell attachment. To confirm this theory, R. marinus was grown, and activity assays showed that the major part of the xylanase activity was connected to whole cells. Moreover, immunocytochemical detection using a Xyn10A-specific antibody proved presence of Xyn10A on the R. marinus cell surface. In the light of this, a revision of experimental data present on both Xyn10A and Man26A was performed, and the results all indicate a cell-anchoring role of the domain, suggesting that this domain represents a novel type of module that mediates cell attachment in proteins originating from members of the phylum Bacteroidetes.

Amino Acid Sequence↗

PubMed2004

Reduction of vanadium(V) with Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans.

Biotechnological leaching has been proposed as a suitable method for extraction of vanadium from spent catalysts and oil ash. In the biological leaching process, the vanadium(V) can be reduced to vanadium(IV), which is a less toxic and more soluble form of the vanadium. The present investigation showed that Acidithiobacillus ferrooxidans efficiently reduced vanadium(V) in the form of vanadium pentaoxide, to vanadyl(IV) ions, and tolerated high concentrations of vanadium(IV) and vanadium(V). A. ferrooxidans was compared with Acidithiobacillus thiooxidans, which has previously been utilized for vanadium leaching and reduction. Vanadium pentaoxide and sodium vanadate were used as model compounds. The results of this study indicate possibilities to develop an economical and technically feasible process for biotechnological vanadium recovery.

Acidithiobacillus↗

PubMed2002

The solution structure of the CBM4-2 carbohydrate binding module from a thermostable Rhodothermus marinus xylanase.

The solution structure is presented for the second family 4 carbohydrate binding module (CBM4-2) of xylanase 10A from the thermophilic bacterium Rhodothermus marinus. CBM4-2, which binds xylan tightly, has a beta-sandwich structure formed by 11 strands, and contains a prominent cleft. From NMR titrations, it is shown that the cleft is the binding site for xylan, and that the main amino acids interacting with xylan are Asn31, Tyr69, Glu72, Phe110, Arg115, and His146. Key liganding residues are Tyr69 and Phe110, which form stacking interactions with the sugar. It is suggested that the loops on which the rings are displayed can alter their conformation on substrate binding, which may have functional importance. Comparison both with other family 4 cellulose binding modules and with the structurally similar family 22 xylan binding module shows that the key aromatic residues are in similar positions, and that the bottom of the cleft is much more hydrophobic in the cellulose binding modules than the xylan binding proteins. It is concluded that substrate specificity is determined by a combination of ring orientation and the nature of the residues lining the bottom of the binding cleft.

Binding Sites↗

PubMed2002

Calcium binding and thermostability of carbohydrate binding module CBM4-2 of Xyn10A from Rhodothermus marinus.

Calcium binding to carbohydrate binding module CBM4-2 of xylanase 10A (Xyn10A) from Rhodothermus marinus was explored using calorimetry, NMR, fluorescence, and absorbance spectroscopy. CBM4-2 binds two calcium ions, one with moderate affinity and one with extremely high affinity. The moderate-affinity site has an association constant of (1.3 +/- 0.3) x 10(5) M(-1) and a binding enthalpy DeltaH(a) of -9.3 +/- 0.4 kJ x mol(-1), while the high-affinity site has an association constant of approximately 10(10) M(-1) and a binding enthalpy DeltaH(a) of -40.5 +/- 0.5 kJ x mol(-1). The locations of the binding sites have been identified by NMR and structural homology, and were verified by site-directed mutagenesis. The high-affinity site consists of the side chains of E11 and D160 and backbone carbonyls of E52 and K55, while the moderate-affinity site comprises the side chain of D29 and backbone carbonyls of L21, A22, V25, and W28. The high-affinity site is in a position analogous to the calcium site in CBM4 structures and in a recent CBM22 structure. Binding of calcium increases the unfolding temperature of the protein (T(m)) by approximately 23 degrees C at pH 7.5. No correlation between binding affinity and T(m) change was noted, as each of the two calcium ions contributes almost equally to the increase in unfolding temperature.

Binding Sites↗

PubMed2002

Rhodothermus marinus: a thermophilic bacterium producing dimeric and hexameric citrate synthase isoenzymes.

Two separate citrate synthases from the extremely thermophilic bacterium Rhodothermus marinus have been identified and purified. One of the enzymes is a hexameric protein and is the first thermostable, hexameric citrate synthase to be isolated. The other is a dimeric enzyme, which is also thermostable but possesses both citrate synthase and 2-methyl citrate synthase activities. 2-Methyl citrate synthase uses propionyl-coenzyme A as one of its substrates and in Escherichia coli, for example, it has been implicated in the metabolism of propionate. However, no growth of R. marinus was observed using minimal medium with propionate as the sole carbon source, and both hexameric and dimeric enzymes were produced irrespective of whether propionate was included in the growth medium. The data are discussed with respect to the evolutionary relationships between the known hexameric and dimeric citrate synthases and 2-methyl citrate synthase.

Amino Acid Sequence↗

PubMed2002

Microbial detoxification of waste rubber material by wood-rotting fungi.

The extensive use of rubber products, mainly tires, and the difficulties to recycle those products, has resulted in world wide environmental problems. Microbial devulcanisation is a promising way to increase the recycling of rubber materials. One obstacle is that several microorganisms tested for devulcanisation are sensitive to rubber additives. A way to overcome this might be to detoxify the rubber material with fungi prior to the devulcanisation. In this study, 15 species of white-rot and brown-rot fungi have been screened with regard to their capacity to degrade an aromatic model compound in the presence of ground waste tire rubber. The most effective fungus, Resinicium bicolor, was used for detoxification of rubber material. Increase in growth of the desulfurising bacterium Thiobacillus ferrooxidans in presence of the rubber treated with Resinicium bicolor compared to untreated rubber demonstrated that detoxification with fungi is possible.

Anthraquinones↗