Biomedical subjects

Omathanu Pillai

Publications and source records attributed to Omathanu Pillai.

13 recordsLinked to original sources

PubMed2005

Preparation, cellular transport, and activity of polyamidoamine-based dendritic nanodevices with a high drug payload.

Dendrimers are emerging as a relatively new class of polymeric biomaterials with applications in drug delivery, and imaging. Achieving a high drug payload in dendrimers, and understanding the therapeutic effect of the dendrimer-drug conjugates are receiving increasing attention. A high drug payload nanodevice was obtained by covalent conjugation of ibuprofen to a polyamidoamine (PAMAM-G4-OH) dendrimer. Using DCC as a coupling agent, 58 molecules of ibuprofen were covalently conjugated to one molecule of generation 4 PAMAM-OH dendrimer. Cellular entry of the fluoroisothiocynate (FITC)-labeled dendrimer-drug conjugate was evaluated in vitro by using human lung epithelial carcinoma A549 cells by flow cytometry, confocal microscopy and UV/Visible spectroscopy. The pharmacological activity of the dendrimer-ibuprofen conjugate was compared to pure ibuprofen at various time points by measuring the suppression of prostaglandin E2. Significant amounts of the conjugate entered the cells rapidly within 15 min. Suppression of prostaglandin was noted within 30 min for the dendrimer-drug conjugates versus 1 h for the free ibuprofen. The results suggest that dendrimers with high drug payload improve the drug's efficacy by enhanced cellular delivery, and may produce a rapid pharmacological response. These dendrimer-drug conjugates can potentially be further modified by attaching antibodies and ligands for targeted drug delivery.

Biocompatible Materials↗

PubMed2004

Transdermal iontophoresis of insulin: IV. Influence of chemical enhancers.

Transdermal iontophoresis per se may not be able to achieve significant permeation of large peptides like insulin, thereby necessitating the use of combination strategies involving chemical enhancers and iontophoresis. The study investigated effect of pre-treatment with commonly used vehicles such as ethanol (EtOH), propylene glycol (PG), water and their binary combinations, dimethyl acetamide (DMA), 10% dimethyl acetamide in water, ethyl acetate (EtAc) and isopropyl myristate (IPM) on insulin iontophoresis. Solvents, which acted on the lipid bilayer, were able to produce a synergistic enhancement with iontophoresis. The binary solvent systems produced either additive or no effect, when combined with iontophoresis. FT-IR studies showed that EtOH, DMA, EtAc caused lipid extraction and the former two also caused changes in skin proteins, whereas IPM caused increase in lipid fluidity. TGA studies showed that EtOH and PG caused dehydration of skin. Skin barrier property was severely compromised with DMA, followed by EtOH and EtAc, while IPM and PG had relatively minimum skin barrier altering potential. Thus, this study demonstrates the possibility of achieving higher permeation of large peptides like insulin by combining iontophoresis with chemical enhancers that act on the intercellular lipids.

Adjuvants, Pharmaceutic↗

PubMed2004

Solid-state characterization of mefenamic acid.

The purpose of this study was to characterize mefenamic acid (MA) from commercial samples and samples crystallized from different solvents. Various techniques used for characterization included microscopy (hot stage microscopy, scanning electron microscopy), intrinsic dissolution rate, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and powder X-ray diffractometry (pXRD). The commercial samples varied in their crystal habit, thermal behavior, and intrinsic dissolution rate. It was found that the commercial samples were polymorphic Form I, which converted to Form II on heating in a DSC pan. Similarly, compression in an intrinsic dissolution rate (IDR) press resulted in the conversion of Form I to Form II. On the other hand, the samples recrystallized from different solvents under varying conditions yielded different crystal habits. Stirring and degree of supersaturation significantly influenced the crystal habit in all the solvents used in the study. Samples crystallized from ethanol and tetrahydrofuran yielded Form I, which behaved similarly to the commercial samples (M1 and M3). Recrystallization from ethyl acetate at a fast cooling rate yielded Form I, which on melting crystallized to Form II. The form I crystallized from ethyl acetate by fast cooling converted partially to form II on storing at ambient conditions. Forms I and II of MA were enantiotropically related. The results demonstrate the variable material characteristics of the commercial samples of MA and the influence of the crystallizing conditions on the formation of the polymorphs.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2004

Hyperbranched polymer-drug conjugates with high drug payload for enhanced cellular delivery.

PURPOSE: To synthesize and evaluate hyperbranched polymer (HBP)-drug conjugates with high drug payload for enhanced cellular delivery. METHODS: Polyol- and polyglycerol-ibuprofen conjugates with or without imaging agent fluorescein isothiocyanate (FITC) were synthesized using dicyclohexilcarbodiimide (DCC) as a coupling agent. Drug-polymer conjugates were characterized using 13C NMR, 1H NMR, and gel permeation chromatography (GPC). Stability of the drug-conjugates was studied using free drug release through a dialysis membrane. Cellular entry of FITC-labeled HBP conjugates was studied using fluorescence activated cell sorter (FACS), and cell supernatant was analyzed by UV-visible spectrophotometer. The intracellular localization of FITC-labeled conjugates in A549 lung epithelial cells was imaged using fluorescence microscopy. Anti-inflammatory activity of the HBP-ibuprofen conjugates was estimated in vitro by measuring the concentration of prostaglandin (PGE2) using an ELISA kit. RESULTS: The average number of ibuprofen molecules conjugated per molecule of HBP was estimated to be 50 for polyol and 53 for polyglycerol. The HBP-drug conjugates did not release the drug up to 72 h in methanol, indicating the presence of stable ester bonds. Both the polymer-drug conjugates entered the cells rapidly. The conjugates were localized in the cell cytosol as evidenced by fluorescence microscopy. Within 30 min, the HBP-drug conjugates showed rapid suppression of PGE2 synthesis, whereas free ibuprofen did not show any activity. At later times, the conjugates showed comparable activity. CONCLUSIONS: For the first time, we report HBP conjugates with a high drug payload. HBP-drug conjugates entered the cells rapidly and produced the desired pharmacological action. This study demonstrates that hyperbranched polyol and polyglycerol are promising nanovehicles for achieving enhanced cellular delivery of drugs.

Cell Line, Tumor↗

PubMed2004

Solid-state characterization of rifampicin samples and its biopharmaceutic relevance.

Polymorphism of rifampicin has been postulated to be responsible for its variable bioavailability from solid oral dosage forms. In this regard, it was believed that form II is the preferred form and the content of amorphous needs to be critically monitored. However, there was no study in literature that determines solubility advantage associated with rifampicin polymorphs and further the desired raw material characteristics for the consistent bioavailability. Hence, this investigation was undertaken with an objective to determine biopharmaceutic relevance of rifampicin physical forms and to propose critical raw material specifications for rifampicin bulk material. For this purpose, solid-state properties of standard form I, form II, amorphous and commercial samples acquired from rifampicin manufacturers were characterized by differential scanning calorimetry (DSC), Fourier transformed infrared spectroscopy (FTIR), hot stage microscopy (HSM), thermogravimetric analysis (TGA), powder X-ray diffraction (p-XRD), solid-state nuclear magnetic resonance (NMR) and molecular modelling. In addition, intrinsic dissolution of standard samples, powder dissolution as well as particle size distribution of all the samples and powder dissolution of various sieve fraction of commercial samples were done in order to study the influence of polymorphism and other factors on rate and extent of dissolution. It was found that rifampicin in commercial bulk samples exist as various combinations of form I, form II and amorphous. As physical forms show comparable intrinsic dissolution rate (IDR) at all the pH values, solubility advantage associated with rifampicin polymorphs is negligible. Nevertheless, powder dissolution of commercial samples was influenced by particle size. In powder dissolution of different sieve fractions of commercial samples, fine particles below 100 microm have shown high rate and extent of dissolution irrespective of polymorphic content, whereas particles above 100 microm exhibited reduced dissolution. In intrinsic dissolution, thermodynamically unstable form II exhibited lower IDR than stable form I. Further, this difference is evident only at pH 2.0 and at all other pH values there was no difference in IDR of these two forms. For this unexpected finding, two hypotheses based on differences in H-bonding of the polymorph have been proposed.

Biological Availability↗

PubMed2004

Physicochemical evaluation, in vitro human skin diffusion, and concurrent biotransformation of 3-O-alkyl carbonate prodrugs of naltrexone.

PURPOSE: The purpose of this study was to evaluate the physicochemical properties and in vitro human skin diffusion of the 3-O-alkyl carbonate prodrugs of naltrexone (NTX). METHODS: Melting points and heats of fusion (deltaHf) were determined using differential scanning calorimetry. In vitro human skin permeation rates of NTX and its prodrugs were measured using a flowthrough diffusion cell system. Drug disposition in the skin was quantified at the end of the diffusion experiment. The solubilities of the drugs were determined in mineral oil and isotonic buffer. Partitioning of the prodrugs from vehicle to skin was determined using isolated sheets of human stratum corneum (SC). RESULTS: All the prodrugs hydrolyzed to NTX on passing through the skin, and the methyl NTX-3-O-carbonate (ME-NTX) provided the highest NTX flux, apparent permeability coefficient (Kp), and calculated relative thermodynamic activity from the melting point and deltaHf. The ME-NTX SC/vehicle partition coefficient was the highest of the prodrug series, although similar to the NTX SC/vehicle partition coefficient value. The shortest chain prodrugs underwent the highest extent of bioconversion to NTX upon passing through the skin. CONCLUSIONS: Within this 3-O-alkyl carbonate prodrug series, the shortest chain prodrug was the most skin-permeable compound with the highest partition coefficient and a significant extent of bioconversion.

Biotransformation↗

PubMed2004

Biopharmaceutic classification system: a scientific framework for pharmacokinetic optimization in drug research.

The tenets of biopharmaceutics, solubility and permeability, are of pivotal importance in new drug discovery and lead optimization due to the dependence of drug absorption and pharmacokinetics on these two properties. A classification system for drugs based on these two fundamental parameters, Biopharmaceutic Classification System (BCS), provides drug designer an opportunity to manipulate structure or physicochemical properties of lead candidates so as to achieve better "deliverability". Considering the facts for failure of NCEs, drug research, once concentrating on optimizing the efficacy and safety of the leads, dramatically transformed in the past two decades. With the enormous number of molecules being synthesized using combinatorial and parallel synthesis, high throughput methodologies for screening solubility and permeability has gained significant interest in pharmaceutical industry. Ultimate aim of the drug discovery scientist in pharmacokinetic optimization is to tailor the molecules so that they show the features of BCS class I without compromising on pharmacodynamics. Considerations to optimize drug delivery and pharmacokinetics right from the initial stages of drug design propelled need for "High Throughput Pharmaceutics" (HTP). In silico predictions and development of theoretical profiles for solubility and lipophilicity provides structure based biopharmaceutical optimization, while in vitro experimental models (microtitre plate assays and cell cultures) validate the predictions. Thus, biopharmaceutical characterization during drug design and early development helps in early withdrawal of molecules with insurmountable developmental problems associated with pharmacokinetic optimization.

Animals↗

PubMed2003

Transdermal delivery of insulin from poloxamer gel: ex vivo and in vivo skin permeation studies in rat using iontophoresis and chemical enhancers.

Gels are considered to be the most suitable delivery vehicle for iontophoresis, as they can be easily amalgamated with the iontophoretic delivery system and can also match the contours of the skin. Insulin was used as a model peptide for large peptides in the molecular weight range of 3-7 kDa. A gel formulation of insulin was formulated using poloxamer 407 and was evaluated by ex vivo and in vivo skin permeation studies in rat with chemical enhancer and/or iontophoresis. The poloxamer gel was physically and chemically stable during the storage period. In ex vivo studies, both linoleic acid and menthone in combination with iontophoresis showed a synergistic enhancement of insulin permeation. The plasma insulin concentration (PIC) was highest with linoleic acid pre-treatment, in agreement with ex vivo permeation studies, but the reduction in plasma glucose levels (PGL) was comparable to iontophoresis. Menthone pre-treatment resulted in rapid attainment of peak PIC, but the reduction in PGL was less than other treatment groups. There was no direct relation between PIC and PGL and is attributed to the fact that the action of insulin in mediated by a cascade of cellular mechanisms, before a reduction in PGL is observed. However, iontophoresis either alone or in combination with linoleic acid produced a reduction in PGL to the extent of 36-40%. A combination of chemical enhancers and iontophoresis caused greater skin irritation than when either of them was used alone.

Administration, Cutaneous↗

PubMed2003

Transdermal iontophoresis of insulin. II. Physicochemical considerations.

Transdermal iontophoresis is one of the potential enhancement strategies for the delivery of large and charged molecules. Insulin, a polypeptide of 6 kDa was used as a model for large peptides to understand the influence of peptide concentration, NaCl concentration, buffer type and its concentration on the transport efficiency of iontophoresis. Maximum enhancement was found at 3 mg/ml (75 IU/ml). The permeation of insulin was found to increase up to 0.05 M NaCl and decreased at higher concentrations of NaCl. The glucose permeation studies showed that permeation of insulin increased in the presence of NaCl due to ion induced convective flow. The flux enhancement of insulin in the presence of phthalate buffer was higher in comparison to citrate buffer, but the enhancement in these two buffers was the same in the presence of 0.05 M NaCl, which was also supported by a similar trend in conductivity values. However, the solution conductivity values did not reflect the influence of co-ions and counter ions on the transport of large peptides across the skin. Overall the findings revealed that the transport efficiency of large peptides like insulin may be improved by the optimisation of competing ions in solution.

Administration, Cutaneous↗

PubMed2003

Transdermal iontophoresis of insulin. V. Effect of terpenes.

To increase the skin permeation of large peptides like insulin, it is necessary to utilize a combination of enhancement strategies. In this regard, this study investigated the effect of terpenes/EtOH combination in comparison to EtOH and neat terpene on transdermal iontophoretic permeation of insulin. Ex-vivo experiments were conducted using full thickness rat skin after pre-treatment for 2 h with 5% of menthol, menthone, cineole and pulegone in EtOH; EtOH alone; neat menthone with and without iontophoresis (0.5 mA/cm(2); 6 h). FT-IR studies were carried out using rat epidermal sheets after pre-treatment with enhancer solution for 2 h and tritiated water permeation studies was used to investigate the alteration in skin barrier property after enhancer or current treatment. The lag time was significantly reduced (P<0.05) with terpene/EtOH pre-treatment in comparison to passive control and EtOH pre-treatment, although there was no significant difference (P>0.05) among the terpenes. Synergistic enhancement in flux was observed with terpene/EtOH, and menthone/EtOH showed highest enhancement among the terpene/EtOH combinations. On the other hand, enhancement with neat menthone was higher than with menthone/EtOH. FT-IR studies showed that terpene/EtOH, EtOH and neat terpene act at the intercellular lipids. The skin barrier property was significantly (P<0.05) compromised with neat menthone treatment. Iontophoresis had a lesser effect on skin barrier property compared to chemical enhancer pre-treatment. Terpene/EtOH caused synergistic enhancement of insulin permeation when combined with iontophoresis and was influenced by the type and concentration of terpene.

Administration, Cutaneous↗

PubMed2003

Transdermal iontophoresis of insulin. Part 1: A study on the issues associated with the use of platinum electrodes on rat skin.

We have studied the issues associated with the use of platinum electrodes for transdermal iontophoretic delivery of peptides, using insulin as a model peptide. Insulin permeation was studied using full-thickness rat skin by varying the donor solution pH as a function of electrode polarity. The stability of insulin under the iontophoretic conditions was studied using TLC, SDS-polyacrylamide gel electrophoresis and HPLC. Large pH shifts were observed during anodal iontophoresis (AI), when the donor solution pH was above the isoelectric point of insulin and in cathodal iontophoresis (CI), when the donor solution pH was below the isoelectric point of insulin. The direction and magnitude of electroosmotic flow was influenced by pH of the donor solution and the electrode polarity. On the other hand, the buffer used to maintain the pH governed the contribution of electrorepulsion to the overall transport of insulin. Electrochemical degradation of insulin was significant during AI at pH 7.4. Among the pH investigated, AI of insulin at pH 3.6 and CI at pH 8.35 were better, as the pH shift was relatively less and electrochemically more stable during iontophoresis as compared with other pH. In summary, the pH shift caused by platinum electrodes had a significant influence on the permeation and stability of insulin.

Animals↗

PubMed2002

Characterization of azithromycin hydrates.

Azithromycin (AZI) is a macrolide antibiotic with an expanded spectrum of activity that is commercially available as a dihydrate. This study was carried out to characterize hydrates of azithromycin. A commercial dihydrate sample was used to prepare monohydrate from water/ethanol (1:1) mixture. Hydrates were characterized using DSC, TGA, KFT, XRD, HSM, SEM and FT-IR. TGA showed that the commercial samples are dihydrate and the sample prepared from water/ethanol (1:1) was a monohydrate. Solubility studies revealed that monohydrate converted to dihydrate during solubility studies and as a result there was no significant difference in the equilibrium solubility of MH and DH. Thermal analysis under various conditions revealed that dehydration and melting took place simultaneously. Anhydrous AZI was found to be hygroscopic and converted to DH on storing at room temperature. Molecular modeling studies revealed the probable sites of attachment of water molecules to AZI.

Azithromycin↗

PubMedDate not supplied

Synthesis, cellular transport, and activity of polyamidoamine dendrimer-methylprednisolone conjugates.

Dendrimers have emerged as promising multifunctional nanomaterials for drug delivery due to their well-defined size and tailorability. We compare two schemes to obtain methylprednisolone (MP)-polyamidoamine dendrimer (PAMAM-G4-OH) conjugate. Glutaric acid (GA) was used as a spacer to facilitate the conjugation. In scheme A, PAMAM-G4-OH was first coupled to GA and then further conjugated with MP to obtain PAMAM-G4-GA-MP conjugates. This scheme yields a lower conjugation ratio of MP, presumably because of lower reactivity and steric hindrance for the steroid at the crowded dendrimer periphery. In scheme B, this steric hindrance was overcome by first preparing the MP-GA conjugate, which was then coupled to the PAMAM-G4-OH dendrimer. The (1)H NMR spectrum of the conjugate from scheme B indicates a conjugation of 12 molecules of MP with the dendrimer, corresponding to a payload of 32 wt %. In addition, conjugates were further fluorescent-labeled with fluoroisothiocynate (FITC) to evaluate the dynamics of cellular entry. Flow cytometry and UV/visible spectroscopic analysis showed that the conjugate is rapidly taken up inside the cell. Fluorescence and confocal microscopy images on A549 human lung epithelial carcinoma cells treated with conjugates show that the conjugate is mostly localized in cytosol. MP-GA-dendrimer conjugate showed comparable pharmacological activity to free MP, as measured by inhibition of prostaglandin secretion. These conjugates can potentially be further conjugated with a targeting moiety to deliver the drugs to specific cells in vivo.

Biological Transport↗