Biomedical subjects

Orlando J Rojas

Publications and source records attributed to Orlando J Rojas.

10 recordsLinked to original sources

PubMed2006

Short-range interactions between non-ionic surfactant layers.

Short-range interactions between surfactant and lipid layers are of great importance in technical applications in complex fluids such as foams, dispersions and emulsions, as well as in the formulation and performance of dispersants, detergents and flocculants. It is also of utmost importance in biological systems where interactions between biomembranes influence a range of processes. The field of short-range interactions has been thoroughly investigated during the past 30 years, following the emergence of a number of techniques to measure interaction forces. Thus, our understanding has increased considerably and it is timely to summarize relevant knowledge accumulated in this area. In this review we focus on the nature of short-range interactions between non-ionic and zwitterionic surfactant and lipid layers exposing their polar groups to the surrounding medium. We discuss the complex interplay of short-range (van der Waals, hydration, steric and other) forces based on recent theoretical and experimental results.

Emulsions↗

PubMed2006

Quantitative 31P NMR detection of oxygen-centered and carbon-centered radical species.

Quantitative 31P NMR spin trapping techniques can be used as effective tools for the detection and quantification of many free radical species. Free radicals react with a nitroxide phosphorus compound, 5-diisopropoxy-phosphoryl-5-methyl-1-pyrroline-N-oxide (DIPPMPO), to form stable radical adducts, which are suitably detected and accurately quantified using (31)P NMR in the presence of phosphorus containing internal standards. Initially, the 31P NMR signals for the radical adducts of oxygen-centered (*OH, O2*-) and carbon-centered (*CH3, *CH2OH, CH2*CH2OH) radicals were assigned. Subsequently, the quantitative reliability of the developed technique was demonstrated under a variety of experimental conditions. The 31P NMR chemical shifts for the hydroxyl and superoxide reaction adducts with DIPPMPO were found to be 25.3, 16.9, and 17.1 ppm (in phosphate buffer), respectively. The 31P NMR chemical shifts for *CH3, *CH2OH, *CH(OH)CH3, and *C(O)CH3 spin adducts were 23.1, 22.6, 27.3, and 30.2 ppm, respectively. Overall, this effort forms the foundations for a targeted understanding of the nature, identity, and mechanisms of radical activity in a variety of biomolecular processes.

Carbon↗

PubMed2005

Interactions between nonpolar surfaces coated with the nonionic surfactant n-dodecyl-beta-D-maltoside.

The forces acting between nonpolar surfaces coated with the nonionic surfactant n-dodecyl-beta-D-maltoside (beta-C(12)G(2)) were investigated at concentrations below and above the critical micelle concentration. The long-range and adhesive forces were measured with a bimorph surface force apparatus (MASIF). It was found that the effect of hydrodynamic interactions had to be taken into account for an accurate determination of the short-range static interactions. The results were compared with disjoining pressure versus thickness curves that were obtained earlier with a thin film pressure balance (TFPB). This comparison led to the conclusion that the charges observed at the air-water interface are not due to charged species present in the surfactant sample. In addition, it was observed that the stability of thin liquid films crucially depends on the surfactant's bulk concentration (c) and thus on the packing density in the adsorbed layer. The force barrier preventing removal of the surfactant layer from between two solid-liquid interfaces increases with increasing c, while for foam films it is the stability of the Newton black film that increases with c. Finally, the results obtained for beta-C(12)G(2) were compared with those obtained for the homologue n-decyl-beta-d-maltoside (beta-C(10)G(2)) as well as with those obtained for nonionic surfactants with polyoxyethylene moieties as polar groups.

Adsorption↗

PubMed2005

Viscoelastic properties of isomeric alkylglucoside surfactants studied by surface light scattering.

Surface light scattering (SLS) by capillary waves was used to investigate the adsorption behavior of non-ionic sugar surfactants at the air/liquid interface. SLS by the subphase (water) followed predictions from hydrodynamic theory. The viscoelastic properties (surface elasticity and surface viscosity) of monolayers formed by octyl beta-glucoside, octyl alpha-glucoside, and 2-ethylhexyl alpha-glucoside surfactants were quantified at submicellar concentrations. It is further concluded that a diffusional relaxation model describes the observed trends in high-frequency, nonintrusive laser light scattering experiments. The interfacial diffusion coefficients that resulted from fitting this diffusional relaxation model to surface elasticity values obtained with SLS reflect the molecular dynamics of the subphase near the interface. However, differences from the theoretical predictions indicate the existence of effects not accounted for such as thermal convection, molecular rearrangements, and other relaxation mechanisms within the monolayer. Our results demonstrate important differences in molecular packing at the air-water interface for the studied isomeric surfactants.

Adsorption↗

PubMed2005

Effect of Fenton's reagent on O/W emulsions stabilized by black liquor.

The effect of Fenton's reagent (FR) on surface and dispersion properties of black liquor (BL) was investigated. These properties were compared to those of indulin C (IC), a commercial lignin, and egg lecithin (Le). FR was applied at two different bulk concentrations of H2O2 (160 and 320 mM). At pH 8, a minimum in surface tension for the Fenton treated BL was observed. The dispersant ability of BL, IC and Le in oil-in-water (O/W) emulsions was studied by measuring emulsion stability and drop size. It was found that the surface activity and emulsifying capability of BL were higher than those of IC. The emulsifying capability of Le was improved by the FR treatment at low H2O2 concentration.

Emulsions↗

PubMed2005

Effect of surfactants on Fenton's reagent-mediated degradation of Kraft black liquor.

One of the limitations of the biodegradation of hydrophobic chemical compounds, like lignins, is their low solubility in the aqueous solution where this process takes place. To resolve this problem, surfactants have been used to improve the solubility of these hydrophobic compounds. In this investigation, we studied the effect of surfactants (anionic, cationic, and non-ionic) on the treatment of Kraft black liquor with Fenton's reagent. In the Fenton reaction, H2O2 (two different concentrations, 10 mM and 20 mM), FeCl2 (1 mM) and surfactant solution (10%) were used. Black liquor degradation was determined by UV/Visible spectrophotometry and by measuring phenolic groups. In the presence of Fenton's reagent, the optimum conditions for the oxidative degradation of black liquor were 10 mM H2O2, 1 microL of 10% solution of anionic surfactant (SDS). The importance of the use of surfactants for preparing black liquor for subsequent Fenton's reagent-mediated degradation was discussed.

Hydrogen Peroxide↗

PubMed2004

Interactions between nonpolar surfaces coated with the nonionic surfactant hexaoxyethylene dodecyl ether C12E6 and the origin of surface charges at the air/water interface.

The interactions between nonpolar surfaces coated with the nonionic surfactant hexaoxyethylene dodecyl ether C12E6 were investigated using two techniques and three different types of surfaces. As nonpolar surfaces, the air/water interface, silanated negatively charged glass, and thiolated uncharged gold surfaces were chosen. The interactions between the air/water interfaces were measured with a thin film pressure balance in terms of disjoining pressure as a function of film thickness. The interactions between the solid/liquid interfaces were determined using a bimorph surface force apparatus. The influence of the nature of the surface on the interaction forces was investigated at surfactant concentrations below and above the cmc. The adsorption of the nonionic surfactant on the uncharged thiolated surface does not, as expected, lead to any buildup of a surface charge. On the other hand, adsorption of C12E6 on the charged silanated glass and the charged air/water interface results in a lowering of the surface charge density. The reduction of the surface charge density on the silanated glass surfaces is rationalized by changes in the dielectric permittivity around the charged silanol groups. The reason for the surface charge observed at the air/water interface as well as its decrease with increasing surfactant concentration is discussed and a new mechanism for generation of OH- ions at this particular interface is proposed.

Journal Article↗

PubMed2004

Coadsorption and surface forces for selective surfaces in contact with aqueous mixtures of oppositely charged surfactants and low charge density polyelectrolytes.

The coadsorption of a positively charged polyelectrolyte (with 10% of the segments carrying a permanent positive charge, AM-MAPTAC-10) and an anionic surfactant (sodium dodecyl sulfate, SDS) on silica and glass surfaces has been investigated using optical reflectometry and a noninterferometric surface force technique. This is a selective coadsorption system in the sense that the polyelectrolyte does adsorb to the surface in the absence of surfactant, whereas the surfactant does not adsorb in the absence ofpolyelectrolyte. It is found that the total adsorbed amount goes through a maximum when the SDS concentration is increased. Maximum adsorption is found when the polyelectrolyte/surfactant complexes formed in bulk solution are close to the charge neutralization point. Some adsorption does occur also when SDS is present in significant excess. The force measured between AM-MAPTAC-10-coated surfaces on approach in the absence of SDS is dominated at long range by an electrostatic double-layer force. Yet, layers formed by coadsorption from solutions containing both polyelectrolyte and surfactant generate long-range forces of an electrosteric nature. On separation, adhesive interactions are found only when the adsorbed amount is low, i.e., in the absence of SDS and in a large excess of SDS. The final state of the adsorbed layer is found to be nonhysteretic, i.e., independent of the history of the system. The conditions for formation of long-lived trapped adsorption states from mixed polymer-surfactant solutions are discussed.

Journal Article↗

PubMed2003

Polyelectrolytes as adhesion modifiers.

Adsorbed layers of polyelectrolytes have been studied with atomic force microscopy (AFM) and the interferometric surface force apparatus (SFA). Particular emphasis was put on determining the effect of the polyelectrolyte charge density on surface topography, and the effect of the polyelectrolyte coating on the adhesive properties. The AFM was employed to image individual polymer chains at low adsorption densities and to characterize the layer topography and coverage at higher adsorption densities. The adhesive properties between two polyelectrolyte-coated surfaces in air were determined as a function of the number of contacts made at any given spot. The data provide evidence for formation of electrostatic bridges, particularly when highly charged polyelectrolytes are used. Further, material transport between the surfaces is observed when the polyelectrolyte is either highly charged or have a very low charge density. For intermediate charge densities we could not observe any indication of material transfer. The adhesion between one polyelectrolyte-coated surface and one bare surface was initially higher than that between two polyelectrolyte-coated surfaces. However, due to material transfer between the two surfaces the adhesion decreased significantly with the number of times that the surfaces were driven into contact. For the polyelectrolytes of the lowest charge density the results suggest that entanglement effects contribute to the adhesive interaction. The modification of the adhesion by polyelectrolytes in practical systems such as in the case of dry-strength additives to improve paper resistance is also considered.

Adsorption↗

PubMed2002

Fenton's reagent-mediated degradation of residual Kraft black liquor.

In this work, the effect of Fenton's reagent on the degradation of residual Kraft black liquor was investigated. The effect of Fenton's reagent on the black liquor degradation was dependent on the concentration of H2O2. At low concentrations (5 and 15 mM) of H2O2, Fenton's reagent caused the degradation of phenolic groups (6.8 and 44.8%, respectively), the reduction of reaction medium pH (18.2%), and the polymerization of black liquor lignin. At a high concentration (60 mM) of H2O2, Fenton's reagent induced an extensive degradation of lignin (95-100%) and discoloration of the black liquor. In the presence of traces of iron, the addition of H2O2 alone induced mainly lignin fragmentation. In conclusion, Fenton's reagent and H2O2 alone can degrade residual Kraft black liquor under acidic conditions at room temperature.

Biotechnology↗