PubMed Health⌕ Search

Biomedical subjects

Ovanes Mekenyan

Publications and source records attributed to Ovanes Mekenyan.

8 recordsLinked to original sources

Identification of the structural requirements for mutagenicity by incorporating molecular flexibility and metabolic activation of chemicals I: TA100 model.

Traditional attempts to model genotoxicity data have been limited to congeneric data sets, primarily because the mechanism of action was ignored, and frequently, the chemicals required metabolism to the active species. In this exercise, the COmmon REactivity PAtterns (COREPA) approach was used to delineate the structural requirements for eliciting mutagenicity in terms of ranges of descriptors associated with three-dimensional molecular structures. The database used to build the mutagenicity model includes 1196 structurally diverse chemicals tested in the Ames assay by the National Toxicology Program. This manuscript describes the development of the TA100 model that predicts the results of mutagenicity testing using only the Ames TA100 strain. The TA100 model was developed using 148 chemicals that tested positive in TA100 strain without rat liver enzymes (S-9) and 188 chemicals that tested positive in TA100 strain with rat liver enzymes. A decision tree was developed by first comparing the reactivity profile of chemicals that were positive in TA100 without rat liver enzymes to the reactivity profile of the remaining 1048 chemicals. This approach correctly identified 82% of the primary acting mutagens and 94% of the nonmutagens in the training set. The 188 chemicals in the training set that are positive only in the presence of metabolic activation would pass through the decision tree as negative. The next step was to identify the chemicals that are positive only in the presence of metabolic activation. To accomplish this, a series of hierarchically ordered metabolic transformations were used to develop an S-9 metabolism simulator that was applied to each of the 1048 chemicals. The potential metabolites were then screened through the decision tree to identify reactive mutagens. This model correctly identified 77% of the metabolically activated chemicals in a training set. A computer system that applies the COREPA models and predicts mutagenicity of chemicals, including their metabolic activation, was developed. Each prediction is accompanied by a probabilistic estimate of the chemical being in the structural domain covered by the training set.

Biotransformation↗

Interspecies quantitative structure-activity relationship model for aldehydes: aquatic toxicity.

The present study proposes a generic interspecies quantitative structure-activity relationship (QSAR) model that can be used to predict the acute toxicity of aldehydes to most species of aquatic organisms. The model is based on the flow-through fathead minnow (Pimephales promelas) 50% lethal concentration (LC50) data combined with other selected fish acute toxicity data and on the static ciliate (Tetrahymena pyriformis) 50% inhibitory growth concentration (IGC50) data. The toxicity of Schiff-base acting aldehydes was defined using hydrophobicity, as the calculated log 1-octanol/water partition coefficient (log Kow), and reactivity, as the donor delocalizability for the aldehyde O-site (D(O-atom)). The fish model [log 1/LC50 = -2.503(+/-1.950) + 0.480(+/-0.052) log Kow + 18.983(+/-6.573) D(O-atom), n = 62, r2 = 0.619, s2 = 0.241, F = 48.0, Q2 = 0.587] compares favorably with the ciliate model [log 1/IGC50 = -0.985(+/-1.309) + 0.530(+/-0.044) log Kow + 11.369(+/-4.350) D(O-atom), n = 81, r2 = 0.651, s2 = 0.147, F = 72.9, Q2 = 0.626]. The fish and ciliate surfaces appear to be parallel, because they deviate significantly only by their intercepts. These observations lead to the development of a global QSAR for aldehyde aquatic toxicity [log E(-1) = bE(Organism) + 0.505(+/-0.033) log Kow + 14.315(+/-3.731) D(O-atom), n = 143, r2 = 0.698, s2 = 0.187, S2(Fish) = 0.244, S2(Ciliate) = 0.149, F = 98, Q2 = 0.681]. The general character of the model was validated using acute toxicity data for other aquatic species. The aldehydes global interspecies QSAR model could be used to predict the acute aquatic toxicity of untested aldehydes and to extrapolate the toxicity of aldehydes to other aquatic species.

Aldehydes↗

Potency and characterization of estrogen-receptor agonists in United Kingdom estuarine sediments.

The activity of estrogen-receptor (ER) agonists in sediments collected from the United Kingdom (UK) estuaries was assessed using the in vitro recombinant yeast estrogen screen (YES assay). The YES assay was successfully used to determine the in vitro ER agonist potency of pore waters and solvent extracts of sediments collected from UK estuaries. Estrogen-receptor agonists were detected in 66% of the pore water samples and in 91% of the sediment solvent extracts tested. The pore waters tested had ER agonist potencies from less than 2 to 68 ng 17beta-estradiol (E2) L(-1), whereas sediment extracts had potencies from less than 0.2 to 13 microg E2 kg(-1). A toxicity identification evaluation approach using bioassay-directed fractionation was used in an attempt to identify the ER agonists in extracts of sediments collected from the Tyne and Tees estuaries (UK). Gas chromatography-mass spectrometry was used to provide lists of compounds in the fractions obtained that were evaluated for known ER agonist activity using published data and an ER quantitative structure-activity relationship model. Toxicity identification evaluation characterization failed to identify any ER agonists in pore water extracts; however, three compounds in sediment solvent extracts were identified as ER agonists. Nonylphenol, cinnarizine, and cholesta-4,6-dien-3-one were identified in the sample collected from the Tyne estuary. Important ER agonist substances that contaminate marine sediments remain unidentified. The present study as well as previous work on effluents point toward the involvement of natural products in the estrogenic burdens of marine sediments. Further work is required to establish the relative contribution of natural products and anthropogenic chemicals to current environmental impacts in the context of the Oslo and Paris Commission strategy to eliminate hazardous substances by 2020.

Biological Assay↗

Quantitative structure-activity relationship models for prediction of estrogen receptor binding affinity of structurally diverse chemicals.

The demonstrated ability of a variety of structurally diverse chemicals to bind to the estrogen receptor has raised the concern that chemicals in the environment may be causing adverse effects through interference with nuclear receptor pathways. Many structure-activity relationship models have been developed to predict chemical binding to the estrogen receptor as an indication of potential estrogenicity. Models based on either two-dimensional or three-dimensional molecular descriptions that have been used to predict potential for binding to the estrogen receptor are the subject of the current review. The utility of such approaches to predict binding potential of diverse chemical structures in large chemical inventories, with potential application in a tiered risk assessment scheme, is discussed.

Animals↗

Dynamic QSAR techniques: applications in drug design and toxicology.

The basic principles of 3-D quantitative structure-activity relationships (QSARs) analysis are discussed in the light of the fuzzy logic concept. According to that concept, the traditionally one chemical - one structure - one parameter value relationship in QSAR is suggested to be modified into one chemical finite set of structures - range of parameter values principle. In this respect, two recently developed techniques accounting for conformational flexibility in 3-D QSARs are reviewed. A basic assumption underlying both methods is that chemical behavior in complex biological systems is context-dependent. A molecule can exist and interact in a variety of conformations depending on the specificity of the endpoint under investigation and reaction media. It was demonstrated that selection of active conformer(s) in QSAR studies is a task as important as the selection of relevant molecular parameters. Specifically selected active conformers, rather than the lowest-energy states of the chemicals are suggested to be used in the correlative QSARs. The method for recognition the common reactivity pattern (COREPA) of structurally heterogeneous compounds that elicit similar biological behaviour is based on all energetically reasonable conformers of chemicals. The principle assumption of the method is that biologically similar chemicals should possess a commonality in their stereoelectronic (reactivity) pattern. Originally developed algorithms for conformer generation are presented in association with the QSAR methods accounting for conformational flexibility of chemicals. Applicability of the QSAR technique for selection active conformers is illustrated by presenting QSAR models derived for Ah binding affinity of PCBs and antimicrobial activity of rifamicin derivatives. Models for predicting estrogenic activity of structurally diverse chemicals and ACE inhibition exemplified the applicability of the COREPA method. The model performance is analyzed by the 3D screening exercise of large chemical inventories with subsequent experimental validation within the EDAEP project. Besides the impact of conformational flexibility of chemicals in 3D QSAR the role of different molecular descriptors is discussed with respect to their ability to describe molecular interactions with different specificity.

Combinatorial Chemistry Techniques↗

2D-3D migration of large chemical inventories with conformational multiplication. Application of the genetic algorithm.

Mathematical chemistry has afforded a variety of research areas with important tools to understand and predict the behavior of chemicals without having to consider the complexities of three-dimensional conformations of molecules. Predictive toxicology, an area of increasing importance to toxicity assessments critical to molecular design and risk management, must be based on more explicit descriptions of structure, however. Minimum energy conformations are often used for convenience due, in part, to the difficulty of computing a representative population of conformers in all but rigid structures. Such simplifying assumptions fail to reveal the variance of the stereoelectronic nature of molecules as well as the misclassification of chemicals which initiate receptor-based toxicity pathways. Because these errors impact both the success in discovering new lead and the identification of possible hazards, it is important that mathematical chemistry develop additional tools for conformational analysis. This paper presents a new system for automated 2D-3D migration of chemicals in large databases with conformer multiplication. The main advantages of this system are its straightforward performance, reasonable execution time, simplicity and applicability to building large 3D chemical inventories. The module for conformer multiplication within the 2D-3D migration system is based on a new formulation of the genetic algorithm for computing populations of possible conformers. The performance of the automated 2D-3D migration system in building a centralized 3D database for all chemicals in commerce worldwide is discussed. The applicability of the 3D database in assessing the impact of molecular flexibility on identifying active conformers in QSAR analysis and assessing similarity between chemicals is illustrated.

Algorithms↗

A stepwise approach for defining the applicability domain of SAR and QSAR models.

A stepwise approach for determining the model applicability domain is proposed. Four stages are applied to account for the diversity and complexity of the current SAR/QSAR models, reflecting their mechanistic rationality (including metabolic activation of chemicals) and transparency. General parametric requirements are imposed in the first stage, specifying in the domain only those chemicals that fall in the range of variation of the physicochemical properties of the chemicals in the training set. The second stage defines the structural similarity between chemicals that are correctly predicted by the model. The structural neighborhood of atom-centered fragments is used to determine this similarity. The third stage in defining the domain is based on a mechanistic understanding of the modeled phenomenon. Here, the model domain combines the reliability of specific reactive groups hypothesized to cause the effect and the domain of explanatory variables determining the parametric requirements in order for functional groups to elicit their reactivity. Finally, the reliability of simulated metabolism (metabolites, pathways, and maps) is taken into account in assessing the reliability of predictions, if metabolic activation of chemicals is a part of the (Q)SAR model. Some of the stages of the proposed approach for defining the model domain can be eliminated depending on the availability and quality of the experimental data used to derive the model, the specificity of (Q)SARs, and the goals of their ultimate application. The performance of the proposed definition of the model domain is tested using several examples of (Q)SARs that have been externally validated, including models for predicting acute toxicity, skin sensitization, and biodegradation. The results clearly showed that credibility in predictions of QSAR models for chemicals belonging to their domain is much higher than for chemicals outside this domain.

Animals↗

Representation of chemical information in OASIS centralized 3D database for existing chemicals.

The present inventory of existing chemicals in regulatory agencies in North America and Europe, encompassing the chemicals of the European Chemicals Bureau (EINECS, with 61 573 discrete chemicals); the Danish EPA (159 448 chemicals); the U.S. EPA (TSCA, 56 882 chemicals; HPVC, 10 546 chemicals) and pesticides' active and inactive ingredients of the U.S. EPA (1379 chemicals); the Organization for Economic Cooperation and Development (HPVC, 4750 chemicals); Environment Canada (DSL, 10851 chemicals); and the Japanese Ministry of Economy, Trade, and Industry (16811), was combined in a centralized 3D database for existing chemicals. The total number of unique chemicals from all of these databases exceeded 185 500. Defined and undefined chemical mixtures and polymers are handled, along with discrete (hydrolyzing and nonhydrolyzing) chemicals. The database manager provides the storage and retrieval of chemical structures with 2D and 3D data, accounting for molecular flexibility by using representative sets of conformers for each chemical. The electronic and geometric structures of all conformers are quantum-chemically optimized and evaluated. Hence, the database contains over 3.7 million 3D records with hundreds of millions of descriptor data items at the levels of structures, conformers, or atoms. The platform contains a highly developed search subsystem--a search is possible on Chemical Abstracts Service numbers; names; 2D and 3D fragment searches; structural, conformational, or atomic properties; affiliation in other chemical databases; structure similarity; logical combinations; saved queries; and search result exports. Models (collections of logically related descriptors) are supported, including information on a model's author, date, bioassay, organs/tissues, conditions, administration, and so forth. Fragments can be interactively constructed using a visual structure editor. A configurable database browser is designed for the inspection and editing of all types of data items. Database statistics are maintained on the number and quality of structures, conformers, and descriptors. Reports can be generated presenting any chosen subset of structures and descriptors into different formats suitable for inclusion into documents. In addition to fixed report formats, there is a powerful report template designer module with a visual report template editor to produce a customized page layout. The database is compatible at the import/export level with SDF, MOL, SMILES, and other known formats. The precalculated centralized 3D database could be useful for quantitative structure-activity relationship developers avoiding the time-consuming and cumbersome 3D calculation phase of model development.

Algorithms↗