Biomedical subjects

P A Monson

Publications and source records attributed to P A Monson.

13 recordsLinked to original sources

PubMed2005

Dynamic aspects of mercury porosimetry: a lattice model study.

Grand canonical Monte Carlo simulations using both Glauber dynamics and Kawasaki dynamics have been carried out for a recently developed lattice model of a nonwetting fluid confined in a porous material. The calculations are aimed at investigating the molecular scale mechanisms leading to mercury retention encountered during mercury porosimetry experiments. We first describe a set of simulations on slit and ink-bottle pores. We have studied the influence of the pore width parameter on the intrusion/extrusion curve shapes and investigated the corresponding mechanisms. Entrapment appears during Kawasaki dynamics simulations of extrusion performed on ink-bottle pores when the system is studied for short relaxation times. We then consider the more realistic and complex case of a Vycor glass building on recent work on the dynamics of adsorption of wetting fluids (Woo, H. J.; Monson, P. A. Phys. Rev. E 2003, 67, 041207). Our results suggest that mercury entrapment is caused by a decrease in the rate of mass transfer associated with the fragmentation of the liquid during extrusion.

Journal Article↗

PubMed2005

A study of the phase behavior of a simple model of chiral molecules and enantiomeric mixtures.

We present a study of the solid-fluid and solid-solid phase equilibrium for molecular models representative of chiral molecules and enantiomeric mixtures. The models consist of four hard sphere interaction sites of different diameters in a tetrahedral arrangement with the fifth hard sphere interaction site at the center of the tetrahedron. The volumetric properties and free energies of the pure enantiomers and binary mixtures were calculated in both fluid and solid phases using isobaric Monte Carlo simulations. The models exhibit essentially ideal solution behavior in the fluid phase with little chiral discrimination. In the solid phase the effects of chirality are much greater. Solid-fluid phase behavior involving the pure enantiomer solids and also racemic compounds was calculated. The calculations indicate that, depending on the relative sizes of the hard sphere interaction sites, packing effects alone can be sufficient to stabilize a racemic compound with respect to the pure enantiomer solids.

Journal Article↗

PubMed2004

On the mechanical properties and phase behavior of silica: a simple model based on low coordination and strong association.

We present a simple and computationally efficient classical atomistic model of silica in which the silicon and oxygen are simulated as hard spheres with four and two association sites, respectively. We have performed isobaric-isothermal Monte Carlo simulations to study the mechanical and phase behavior of this model. We have investigated solid phase structures of the model corresponding to quartz, cristobalite, and coesite, as well as some zeolite structures. For the model these phases are mechanically stable and highly incompressible. Ratios of zero-pressure bulk moduli and thermal expansion coefficients for alpha quartz, alpha cristobalite, and coesite are in quite good agreement with experimental values. The pressure-temperature phase diagram was constructed and shows three solid phases corresponding to cristobalite, quartz, and coesite, as well as a fluid or glass phase, behavior qualitatively similar to that seen for silica experimentally.

Journal Article↗

PubMed2004

Modeling mercury porosimetry using statistical mechanics.

We consider mercury porosimetry from the perspective of the statistical thermodynamics of penetration of a nonwetting liquid into a porous material under an external pressure. We apply density functional theory to a lattice gas model of the system and use this to compute intrusion/extrusion curves. We focus on the specific example of a Vycor glass and show that essential features of mercury porosimetry experiments can be modeled in this way. The lattice model exhibits a symmetry that provides a direct relationship between intrusion/extrusion curves for a nonwetting fluid and adsorption/desorption isotherms for a wetting fluid. This relationship clarifies the status of methods that are used for transforming mercury intrusion/extrusion curves into gas adsorption/desorption isotherms. We also use Monte Carlo simulations to investigate the nature of the intrusion and extrusion processes.

Journal Article↗

PubMed2004

Modeling desorption of fluids from disordered mesoporous materials.

The desorption mechanism of fluids in disordered mesoporous glasses is studied by Monte Carlo simulations of a coarse-grained lattice model with realistic matrix configurations representative of Vycor. Two methods of simulation are considered: grand canonical ensemble Monte Carlo simulations and dynamic Monte Carlo simulations which mimic the diffusion of the fluid in and out of the material using Kawasaki dynamics. In the grand canonical simulations, cavitation via nucleation of bubbles inside the pores plays the dominant role in determining the fluid configurations along the desorption isotherm. The Kawasaki dynamics simulations indicate that such configurations are achieved dynamically via the gradual advancement of macroscopic front interfaces toward the interior. This is made possible by the bubble nucleation mechanism operating on a length scale that is determined by both the typical pore size and the strength of the solid-fluid interaction.

Journal Article↗

PubMed2004

Adsorption/desorption hysteresis in inkbottle pores: a density functional theory and Monte Carlo simulation study.

The mechanisms of adsorption and desorption in inkbottle-shaped pores are considered for lattice models using grand canonical mean field density functional theory and Monte Carlo simulation. We find that they depend significantly on the particular pore geometry, the nature of the fluid-solid interaction, and the temperature. We find two mechanisms for desorption. One mechanism involves the emptying of the main cavity even as the density of fluid in the necks remains high, a mechanism observed recently in studies of an off-lattice model of an inkbottle. The other is a simultaneous desorption from the entire pore space, behavior that is more closely related to the traditional picture of pore blocking in the inkbottle system.

Journal Article↗

PubMed2004

Solid-fluid and solid-solid phase equilibrium in a model of n-alkane mixtures.

Solid-fluid and solid-solid phase equilibrium for binary mixtures of hard sphere chains modeling n-hexane, n-heptane, and n-octane has been calculated using Monte Carlo computer simulations. Thermodynamic integration was used to calculate the Gibbs free energy and chemical potentials in the solid and fluid phases from pure component reference values. A multiple stage free energy perturbation method was used to calculate the composition derivative of the Gibbs free energy. Equation of state and free energy data for the fluid phase indicate ideal solution behavior. Nonideality is much more significant in the solid phase with only partial solubility of shorter chains in the longer chains and essentially no solubility at the other end of the composition range. The miscibility decreases with increasing chain length difference between the components. For the model of n-hexane/n-octane mixtures solid--solid phase separation has been observed directly in some of the simulations, with the components segregating between the layers of the solid structure. The behavior is similar to that seen in some binary n-alkane mixtures with longer chain lengths but comparable chain length ratios between the components. Such phase separation, although indicated thermodynamically, is not seen directly in the simulations of the n-heptane/n-octane mixture due to the difference in the pure component crystal structures.

Journal Article↗

PubMed2003

Phase behavior and dynamics of fluids in mesoporous glasses.

Equilibrium and dynamical relaxation behavior of fluids confined in disordered mesoporous glasses such as Vycor are studied based on a lattice model using mean field theory and Monte Carlo simulations. Preferential attractive interactions between the solid surfaces and the fluid suppresses macroscopic phase separation, while making the relaxation rate increasingly slow. The free energy landscape characterized by the presence of the many metastable minima separated by finite barriers dominates both the static and dynamic behavior of fluids at low temperature. Our results provide additional insight into the nature of hysteresis in adsorption measurements of gases in porous glasses.

Journal Article↗

PubMed2001

Lattice model of adsorption in disordered porous materials: mean-field density functional theory and Monte Carlo simulations.

We present mean-field density functional theory calculations and Monte Carlo simulations for a lattice model of a fluid confined in a disordered porous material. The model is obtained by a coarse graining of an off-lattice model of adsorption of simple molecules in silica xerogels. In some of our calculations a model of a porous glass is also considered. The lattice models exhibit behavior that is qualitatively similar to that of their off-lattice counterparts but the computations required are much more tractable and this makes it feasible to investigate the effects of porous material microstructure at longer length scales. We focus on exploring in detail the behavior in the adsorption/desorption hysteresis region for these models. In agreement with recent results for a model that uses a random distribution of solid sites on the lattice [Kierlik et al., Phys. Rev. Lett. 87, 055701 (2001)] we show that the disorder of the solid matrix induces multiple metastable states within the hysteresis region, which are evident in both the mean-field theory calculations and the Monte Carlo simulations. These multiple metastable states can be connected by scanning curves that are very similar to those seen in experimental studies of adsorption hysteresis. The results from mean-field theory predict that while there is hysteresis in the adsorption/desorption isotherms it is not possible to locate a condition of phase equilibrium that satisfies thermodynamic consistency. A wider significance of these results is discussed.

Journal Article↗

PubMed2001

Molecular dynamics simulations of hard sphere solidification at constant pressure.

Molecular dynamics simulations in the NPT ensemble are used to study the dynamics of crystallization processes in hard sphere systems. The simulation method used permits us to follow the dynamics after a sudden pressure or temperature quench in a one-step process without the need of extra densification methods. During the quench a strong correlation between the system density and the crystalline order parameter Q(6) is found. The growth of fcc order in the system over time is observed in detail and compared to Q(6)(t). We compare results for the equation of state on the metastable fluid branch with previous results from constant volume molecular dynamics simulations. Some results for the crystallization of binary hard sphere mixtures are also presented for a number of different size ratios.

Journal Article↗

PubMed2001

Capillary condensation in disordered porous materials: hysteresis versus equilibrium behavior.

We study the interplay between hysteresis and equilibrium behavior in capillary condensation of fluids in mesoporous disordered materials via a mean-field density functional theory of a disordered lattice-gas model. The approach reproduces all major features observed experimentally. We show that the simple van der Waals picture of metastability fails due to the appearance of a complex free-energy landscape with a large number of metastable states. In particular, hysteresis can occur both with and without an underlying equilibrium transition, and thermodynamic consistency is not satisfied along the hysteresis loop.

Journal Article↗

PubMed2001

Isobaric molecular dynamics simulations of hard sphere systems.

We describe an implementation of the Andersen algorithm for simulating the molecular dynamics in the isobaric isoenthalpic (NPH) ensemble for the hard sphere potential. The work is based on the adaptation of the Andersen algorithm to hard spheres by de Smedt et al. For a hard sphere system in the NPH ensemble, the particle velocities are not constant between collisions and we describe an efficient method for handling this part of the dynamics. The method is extended to give an NPT ensemble simulation of hard sphere systems by applying an ad hoc rescaling of the velocities. The accuracy of the algorithms is tested by comparison with traditional NVE simulation results for the structural, thermodynamic, and transport properties.

Journal Article↗

PubMed2000

Computer simulations of phase equilibrium for a fluid confined in a disordered porous structure.

We present calculations of the phase diagrams of a Lennard-Jones 12-6 fluid confined in a disordered porous structure made up of a dispersion of spherical particles, following up on an earlier work on the same system. In particular we present additional calculations using more realizations of the matrix and we investigate the applicability of the Gibbs-Duhem integration method to the calculation of phase equilibrium in these systems. The essential picture of disordered and inhomogeneous coexisting vapor and liquid phases, which emerged in the earlier work, is confirmed by the new calculations. However, a second phase transition associated with the wetting of the porous material by the fluid is found to be more sensitive to variations of the matrix realization. While for the present model this transition appears for particular realizations of the matrix, it does not seem to survive averaging over realizations.

Journal Article↗