Biomedical subjects

P Appendino

Publications and source records attributed to P Appendino.

9 recordsLinked to original sources

PubMed2006

Macroporous bioactive glass-ceramic scaffolds for tissue engineering.

Highly bioactive scaffolds for tissue engineering were synthesized using a glass belonging to the SiO2-CaO-K2O (SCK) system. The glass SCK was prepared by a traditional melting-quenching route and its bioactivity was assessed by in vitro tests in a simulated body fluid (SBF). The glass was ground and sieved to obtain powders of specific size that were subsequently mixed with polyethylene particles of two different dimensions. The powders were then uniaxially pressed to obtain a crack free green compact that was thermally treated to remove the organic component and to sinter the inorganic phase. The obtained biomaterial was characterised by means of X-ray Diffraction, SEM equipped with EDS, mercury intrusion porosimetry, density measurements, image analysis, mechanical tests and in vitro evaluations. A glass-ceramic macroporous scaffold with a homogenously distributed and highly interconnected porosity was obtained. The amount and size of the introduced porosity could be tailored using various amounts of polyethylene powders of different size.

Biocompatible Materials↗

PubMed2006

Development of glass-ceramic scaffolds for bone tissue engineering: characterisation, proliferation of human osteoblasts and nodule formation.

Glass-ceramic macroporous scaffolds for tissue engineering have been developed using a polyurethane sponge template and bioactive glass powders. The starting glass (CEL2) belongs to the system SiO(2)-P(2)O(5)-CaO-MgO-Na(2)O-K(2)O and has been synthesised by a conventional melting-quenching route. A slurry of CEL2 powder, polyvinyl alcohol and water has been prepared in order to coat, by impregnation, the polymeric template. An optimised thermal treatment was then use to remove the sponge and to sinter the glass powders, leading to a glass-ceramic replica of the template. Morphological observations, image analyses, mechanical tests and in vitro tests showed that the obtained devices are good candidates as scaffolds for bone-tissue engineering, in terms of pore-size distribution, pore interconnection, surface roughness, and both bioactivity and biocompatibility. In particular, a human osteoblast cell line (MG-63) seeded onto the scaffold after a standardised preconditioning route in simulated body fluid showed a high degree of cell proliferation and a good ability to produce calcium nodules. The obtained results were enhanced by the addition of bone morphogenetic proteins after cell seeding.

Biocompatible Materials↗

PubMed2005

Microstructural and in vitro characterization of SiO2-Na2O-CaO-MgO glass-ceramic bioactive scaffolds for bone substitutes.

In the present research work, the preparation and characterization of bioactive glass-ceramic scaffolds for bone substitutes are described. The scaffolds were prepared by starch consolidation of bioactive glass powders belonging to the SiO2-Na2O-CaO-MgO system using three different organic starches (corn, potatoes and rice) as reported in a previous screening process. The scaffolds, characterized by scanning electron microscopy, showed a porous structure with highly interconnected pores. The pores sizes assessed by mercury intrusion porosimetry put in evidence the presence of pores of 50-100 microm. The structure of the scaffolds was investigated by X-ray diffraction and revealed the glass-ceramic nature of the obtained material. The mechanical properties of the scaffolds were evaluated by means of compressive tests on cubic samples and the obtained results demonstrated their good mechanical strength. The in vitro bioactivity of the scaffolds was tested by soaking them in a simulated body fluid (SBF) and by subsequently characterizing the soaked surfaces by SEM, EDS and X-ray diffraction. Good in vitro bioactivity was found for the starting glass and for the obtained scaffolds. Moreover, the scaffold bioresorption, tested by measuring the samples weight loss in SBF at different periods of time, showed a partial resorption of the scaffolds. Cell culture testing of the three different scaffolds indicated no differences in cell number and in alkaline phosphatase activity; the morphology of the osteoblasts showed good spreading, comparable to bulk material which was used as the control.

Body Fluids↗

PubMed2005

Surface characterization of silver-doped bioactive glass.

A bioactive glass belonging to the system SiO(2)-CaO-Na(2)O was doped with silver ions by ion exchange in molten salts as well as in aqueous solution. The ion exchange in the solution was done to check if it is possible to prepare an antimicrobial material using a low silver content. The doped glass was characterized by means of X-ray diffraction, SEM observation, EDS analysis, bioactivity test (soaking in a simulated body fluid), leaching test (GFAAS analyses) and cytotoxicity test. It is demonstrated that these surface silver-doped glasses maintain, or even improve, the bioactivity of the starting glass. The measured quantity of released silver into simulated body fluid compares those reported in literature for the antibacterial activity and the non-cytotoxic effect of silver. Cytotoxicity tests were carried out to understand the effect of the doped surfaces on osteogenic cell adhesion and proliferation.

Anti-Bacterial Agents↗

PubMed2001

Biological glass coating on ceramic materials: in vitro evaluation using primary osteoblast cultures from healthy and osteopenic rat bone.

ZrO2 and Al2O3 substrates were successfully coated by a double layer of a silica-based glass named RKKP, using a low-cost firing technique. RKKP is a glass well known for its bioactivity; therefore, a RKKP coating on Al2O3 or ZrO2, allows to combine the excellent mechanical properties of these strong ceramic substrates with its bioactivity. ZrO2 samples were easily coated using a double layer of RKKP by a simple enamelling technique. To accommodate the thermal expansion coefficient mismatch between Al2O3 and RK K P, this substrate was coated using a multilayered composite approach. All of the coatings were characterised from a morphological and compositional point of view, and an extensive biological evaluation was performed using fresh rat osteoblasts. Osteoblast primary cultures were derived from the trabecular bone of femoral condyles harvested from intact (NB) and osteopenic (OB) rats. After characterisation of their phenotype, osteoblasts were seeded on material samples of ZrO2 or Al2O3 coated with RKKP, and cultured for 7 days. Cell proliferation (MTT test) and cell differentiation (alkaline phosphatase activity) were evaluated at the end of the experiment, to assess osteoblast behaviour in the presence of biomaterials and determine if the results were related to the host bone quality. Results of both materials showed a good level of biocompatibility. In particular, MTT significant higher values were detected in NB cultures on ZrO2-RKKP samples; ALP activity significantly increased in NB cultures on Al2O3-RKKP and in OB cultures on both coated samples.

Aluminum Oxide↗

PubMed2000

Coatings on zirconia for medical applications.

In order to combine the mechanical properties of a high-strength inert ceramic (yttria-stabilised zirconia, ZrO2-3%Y2O3, defined as zirconia in the text) with the specific properties of bioactive materials, some zirconia samples were coated by two bioactive phosphosilicate glasses and glass-ceramics: RKKP and AP40. Coatings of about 200-300 microm thickness were prepared by a simple and low-cost firing method. They were characterised by optical and scanning electron microscopy (SEM) and compositional analysis (EDS). The adhesion of the coatings on zirconia was tested by shear tests. Vickers indentations at the coating/zirconia interface were performed in order to observe the crack propagation path. The reactivity of glasses and glass-ceramics coatings towards a simulated body fluid (SBF), having the same ion concentration as that of human plasma, was evaluated and compared to that of the bulk glass and glass-ceramics, by examining the morphology of the reaction layer formed on the surface of the coated zirconia after one month of soaking in the SBF at 37 degrees C.

Biocompatible Materials↗

PubMed1998

Implant anchored complete mandibular denture: evaluation of masticatory efficiency, oral function and degree of satisfaction.

Masticatory efficiency, oral function and degree of satisfaction with the treatment received were analysed in a group of fully edentulous patients with severe atrophy of the mandibular bone, rehabilitated with complete removable dentures, before and after anchoring the dentures to osseointegrated implants. Masticatory efficiency increased significantly and chewing cycles increased in amplitude after anchoring the denture. The component of the chewing cycle that most influenced the increase in functional area was the lateral one. A correlation was found between the increase in the lateral component of the chewing cycle and the increased masticatory efficiency achieved with implant-anchored dentures. The degree of satisfaction with their rehabilitation reported by the subjects was correlated neither to increased masticatory efficiency nor to improved oral function.

Aged↗

PubMed1993

Load transmission evaluation by removable distal-extension partial dentures using holographic interferometry.

Five pairs of bilateral distal-extension removable partial dentures with different clasp designs were constructed on the same dried human mandible in order to compare their load distribution characteristics. The technique of holographic interferometry was used. Among the dentures tested, those with RPI and back action clasps having mesial rests provided the best results from the mechanical point of view. The most unfavourable behaviour was presented by the Akers clasps design. The RPA design and dentures having clasps with continuous MOD rest gave intermediate results.

Dental Clasps↗

PubMedDate not supplied

[A clinical evaluation of the outcome of a bone graft from the iliac crest].

The paper examine 40 cases of bone graft from the iliac crest used in maxillo-facial surgery. The immediate and late complications included pain with resulting difficulty of walking and, less frequently, hematoma, sensitivity disorders and dehiscence of the wound. Late complications were most frequently related to esthetic problems as well as a negligible number of persistent cases of difficult walking and neurological deficiencies. The results obtained were comparable to those most recently reported in the literature. The low incidence of immediate and late sequelae at the donor site and the characteristics of the bone graft confirm the suitability of iliac crest bone graft, in particular for use in reconstructive maxillo-facial surgery.

Age Factors↗