Stereolithographic modelling as an aid to orbital brachytherapy.
PURPOSE: This paper describes the technique of stereolithographic biomodelling and its application to a patient who was treated using orbital brachytherapy. METHODS AND MATERIALS: The process uses a moving laser beam, directed by a computer, to draw cross-sections of the model onto the surface of photo-curable liquid plastic. Using a stereolithographic apparatus (SLA), solid or surface data is sliced by software into very thin cross-sections. A helium cadmium (HeCd) laser then generates a small intense spot of ultraviolet (UV) light that is moved across the top of a vat of liquid photo monomer by a computerised optical scanning system. The laser polymerises the liquid into a solid where it touches, precisely printing each cross-section. A vertical elevator lowers the newly formed layer, and a recoating and levelling system establishes the next layer's thickness. Successive cross-sections (0.25 mm thick), each one adhering to the one below, are built one on top of the other, to form the part from the bottom up. The biomodel allowed the implant to be planned in detail prior to the surgery. The accurate placement of brachytherapy catheters was assured, and the dosimetry could be determined and optimised prior to the definitive procedure. CONCLUSIONS: Stereolithography is a useful technique in the area of orbital brachytherapy. It allows the implant to to be carried out with greater accuracy and confidence. For the patient, it minimises the risk to the eye and provides them with a greater understanding of the procedure.