PubMed Health⌕ Search

Biomedical subjects

P E Bock

Publications and source records attributed to P E Bock.

At least 19 recordsLinked to original sources
PubMed1997

Inactivation of thrombin by antithrombin is accompanied by inactivation of regulatory exosite I.

Exosite I of the blood clotting proteinase, thrombin, mediates interactions of the enzyme with certain inhibitors, physiological substrates and regulatory proteins. Specific binding of a fluorescein-labeled derivative of the COOH-terminal dodecapeptide of hirudin ([5F] Hir54-65) to exosite I was used to probe changes in the function of the regulatory site accompanying inactivation of thrombin by its physiological serpin inhibitor, antithrombin. Fluorescence-monitored equilibrium binding studies showed that [5F]Hir54-65 and Hir54-65 bound to human alpha-thrombin with dissociation constants of 26 +/- 2 nM and 38 +/- 5 nM, respectively, while the affinity of the peptides for the stable thrombin-antithrombin complex was undetectable (>/=200-fold weaker). Kinetic studies showed that the loss of binding sites for [5F]Hir54-65 occurred with the same time-course as the loss of thrombin catalytic activity. Binding of [5F] Hir54-65 and Hir54-65 to thrombin was correlated quantitatively with partial inhibition of the rate of the thrombin-antithrombin reaction, maximally decreasing the bimolecular rate constants 1.7- and 2.1-fold, respectively. These results support a mechanism in which thrombin and the thrombin-Hir54-65 complex can associate with antithrombin and undergo formation of the covalent thrombin-antithrombin complex at modestly different rates, with inactivation of exosite I leading to dissociation of the peptide occurring subsequent to the rate-limiting inactivation of thrombin. This mechanism may function physiologically in localizing the activity of thrombin by allowing inactivation of thrombin that is bound in exosite I-mediated complexes with regulatory proteins, such as thrombomodulin and fibrin, without prior dissociation of these complexes. Concomitant with inactivation of thrombin, the thrombin-antithrombin complex may be irreversibly released due to exosite I inactivation.

Antithrombin III↗
PubMed1996

Binding of fibrin monomer and heparin to thrombin in a ternary complex alters the environment of the thrombin catalytic site, reduces affinity for hirudin, and inhibits cleavage of fibrinogen.

Interaction of the blood clotting proteinase, thrombin, with fibrin monomer and heparin to form a thrombin.fibrin monomer.heparin ternary complex is accompanied by a change in thrombin catalytic specificity. Equilibrium binding interactions in the assembly of the ternary complex were characterized quantitatively using thrombin labeled at the active site with a fluorescent probe and related to changes in thrombin specificity toward exosite I-dependent binding of hirudin and cleavage of fibrinogen. Changes in the active site environment accompanying binding of heparin or fibrin to thrombin in binary complexes were reported by fluorescence enhancements which contributed additively to the perturbation accompanying formation of the ternary complex. Quantitative analysis of the interactions supports a preferentially ordered path of ternary complex assembly, in which initial binding of heparin to thrombin facilitates binding of fibrin monomer with an approximately 40-fold increased affinity. Binding of fibrin monomer in the ternary complex decreased the affinity of native thrombin for hirudin by >100-fold and inhibited cleavage of fibrinogen, but this inhibition was overcome when fibrin(ogen)-fibrin interactions occurred. These results support a ternary complex model in which heparin binding through exosite II of thrombin facilitates fibrin monomer binding via exosite I, with accompanying changes in thrombin catalytic specificity resulting from perturbations in the active site and reduced accessibility of exosite I to hirudin and fibrinogen.

Anilino Naphthalenesulfonates↗
PubMed1996

Analogs of human plasminogen that are labeled with fluorescence probes at the catalytic site of the zymogen. Preparation, characterization, and interaction with streptokinase.

Fluorescent analogs of the proteinase zymogen, plasminogen (Pg), which are specifically inactivated and labeled at the catalytic site have been prepared and characterized as probes of the mechanisms of Pg activation. The active site induced non-proteolytically in Pg by streptokinase (SK) was inactivated stoichiometrically with the thioester peptide chloromethyl ketone. N alpha-[(acetylthio)acetyl]-(D-Phe)-Phe-Arg-CH2Cl; the thiol group generated subsequently on the incorporated inhibitor with NH2OH was quantitatively labeled with the fluorescence probe, 2-((4'-iodoacetamido)anilino)naphthalene-6-sulfonic acid; and the labeled Pg was separated from SK. Cleavage of labeled [Glu]Pg1 by urokinase-type plasminogen activator (uPA) was accompanied by a fluorescence enhancement (delta Fmax/Fo) of 2.0, and formation of 1% plasmin (Pm) activity. Comparison of labeled and native [Glu]Pg1 as uPA substrates showed that activation of labeled [Glu]Pg1 generated [Glu]Pm1 as the major product, while native [Glu]Pg1 was activated at a faster rate and produced [Lys]Pm1 because of concurrent proteolysis by plasmin. When a mixture of labeled and native Pg was activated, to include plasmin-feedback reactions, the zymogens were activated at equivalent rates. The lack of potential proteolytic activity of the Pg derivatives allowed their interactions with SK to be studied under equilibrium binding conditions. SK bound to labeled [Glu]Pg1, and [Lys]Pg1 with dissociation constants of 590 +/- 110 and 110 and 11 +/- 7 nM, and fluorescence enhancements of 3.1 +/- 0.1 and 1.6 +/- 0.1, respectively. Characterization of the interaction of SK with native [Glu]Pg1 by the use of labeled [Glu]Pg1 as a probe indicated a approximately 6-fold higher affinity of SK for the native Pg zymogen compared to the labeled Pg analog. Saturating levels of epsilon-aminocaproic acid reduced the affinity of SK for labeled [Glu]Pg1 by approximately 2-fold and lowered the fluorescence enhancement to 1.8 +/- 0.1, whereas the affinity of SK for labeled [Lys]Pg1 was reduced by approximately 98-fold with little effect on the enhancement. These results demonstrate that occupation of lysine binding sites modulates the affinity of SK for Pg and the changes in the environment of the catalytic site associated with SK-induced conformational activation. Together, these studies show that the labeled Pg derivatives behave as analogs of native Pg which report functionally significant changes in the environment of the catalytic site of the zymogen.

Enzyme Precursors↗
PubMed1995

Role of the catalytic serine in the interactions of serine proteinases with protein inhibitors of the serpin family. Contribution of a covalent interaction to the binding energy of serpin-proteinase complexes.

The contribution of a covalent bond to the stability of complexes of serine proteinases with inhibitors of the serpin family was evaluated by comparing the affinities of beta-trypsin and the catalytic serine-modified derivative, beta-anhydrotrypsin, for several serpin and non-serpin (Kunitz) inhibitors. Kinetic analyses showed that anhydrotrypsin had little or no ability to compete with trypsin for binding to alpha 1-proteinase inhibitor (alpha 1PI), plasminogen activator inhibitor 1 (PAI-1), antithrombin (AT), or AT-heparin complex when present at up to a 100-fold molar excess over trypsin. By contrast, equimolar levels of anhydrotrypsin blocked trypsin binding to non-serpin inhibitors. Equilibrium binding studies of inhibitor-enzyme interactions monitored by inhibitor displacement of the fluorescence probe, p-aminobenzamidine, from the enzyme active site, confirmed that the binding of serpins to anhydrotrypsin was undetectable in the case of alpha 1PI or AT (KI > 10(-5) M), of low affinity in the case of AT-heparin complex (KI 7-9 x 10(-6) M), and of moderate affinity in the case of PAI-1 (KI 2 x 10(-7) M). This contrasted with the stoichiometric high affinity binding of the serpins to trypsin as well as of the non-serpin inhibitors to both trypsin and anhydrotrypsin. Maximal KI values for serpin-trypsin interactions of 1 to 8 x 10(-11) M, obtained from kinetic analyses of association and dissociation rate constants, indicated that the affinity of serpins for trypsin was minimally 4 to 6 orders of magnitude greater than that of anhydrotrypsin. Anhydrotrypsin, unlike trypsin, failed to induce the characteristic fluorescence changes in a P9 Ser-->Cys PAI-1 variant labeled with a nitrobenzofuran fluorescent probe (NBD) which were shown previously to report the serpin conformational change associated with active enzyme binding. These results demonstrate that a covalent interaction involving the proteinase catalytic serine contributes a major fraction of the binding energy to serpin-trypsin interactions and is essential for inducing the serpin conformational change involved in the trapping of enzyme in stable complexes.

Animals↗
PubMed1995

Kinetic characterization of the proteinase binding defect in a reactive site variant of the serpin, antithrombin. Role of the P1' residue in transition-state stabilization of antithrombin-proteinase complex formation.

To elucidate the role of the P1' residue of the serpin, antithrombin (AT), in proteinase inhibition, the source of the functional defect in a natural Ser-394-->Leu variant, AT-Denver, was investigated. AT-Denver inhibited thrombin, Factor IXa, plasmin, and Factor Xa with second order rate constants that were 430-, 120-, 40-, and 7-fold slower, respectively, than those of native AT, consistent with an altered specificity of the variant inhibitor for its target proteinases. AT-Denver inhibited thrombin and Factor Xa with nearly equimolar stoichiometries and formed SDS-stable complexes with these proteinases, indicating that the diminished inhibitor activity was not due to an enhanced turnover of the inhibitor as a substrate. Binding and kinetic studies showed that heparin binding to AT-Denver as well as heparin accelerations of AT-Denver-proteinase reactions were normal, consistent with the P1' mutation not affecting the heparin activation mechanism. Resolution of the two-step reaction of AT-Denver with thrombin revealed that the majority of the defective function was localized in the second reaction step and resulted from a 190-fold decreased rate constant for conversion of a noncovalent proteinase-inhibitor encounter complex to a stable, covalent complex. Little or no effects of the mutation on the binding constant for encounter complex formation or on the rate constant for stable complex dissociation were evident. These results support a role for the P1' residue of antithrombin in transition-state stabilization of a substrate-like attack of the proteinase on the inhibitor-reactive bond following the formation of a proteinase-inhibitor encounter complex but prior to the conformational change leading to the trapping of proteinase in a stable, covalent complex. Such a role indicates that the P1' residue does not contribute to thermodynamic stabilization of AT-proteinase complexes and instead favors a kinetic stabilization of these complexes by a suicide substrate reaction mechanism.

Antithrombins↗
PubMed1992

Active-site-selective labeling of blood coagulation proteinases with fluorescence probes by the use of thioester peptide chloromethyl ketones. I. Specificity of thrombin labeling.

In a new strategy for labeling the active sites of serine proteinases with fluorescence probes (Bock, P. E. (1988) Biochemistry 27, 6633-6639), a thioester peptide chloromethyl ketone inhibitor is incorporated into the enzyme active center and used to produce a unique thiol group which provides a site for selective chemical modification with any one of many thiol-reactive fluorescence probes. This approach was developed to increase the opportunities for identifying fluorescent proteinase derivatives that act as reporters of binding interactions by allowing a large number of derivatives, representing a broad range of probe spectral properties, to be readily prepared. In the studies described here, the specificity of the labeling approach was evaluated quantitatively for the labeling of human alpha and beta/gamma-thrombin with the thioester peptide chloromethyl ketones, N alpha-[(acetylthio)acetyl]-D-Phe-Pro-Arg-CH2Cl and N alpha-[(acetylthio)acetyl]-D-Phe-Phe-Arg-CH2Cl, and the thiol-reactive fluorescence probe, 5-(iodoacetamido)fluorescein. Irreversible inactivation of thrombin by the inhibitors was accompanied by incorporation of 0.98 +/- 0.06 mol/mol of the thioester group into the active site, independent of a 470-fold difference between the thioester peptide chloromethyl ketones in the bimolecular rate constants of alpha-thrombin affinity labeling. Subsequent mild treatment of the covalent thrombin-inhibitor complexes with NH2OH in the presence of 5-(iodoacetamido)fluorescein resulted in generation of the thiol group together with its selective modification and incorporation of 0.96 +/- 0.07 mol of probe/mol of active sites. The incorporated label was localized to a 9000 molecular weight region of alpha and beta/gamma-thrombin containing the catalytic-site histidine residue. Evaluation of competing, side reactions showed that they did not significantly compromise the active site specificity of labeling. These results demonstrated equivalent, active-site-selective fluorescence probe labeling of alpha and beta/gamma-thrombin by use of either of the thioester peptide chloromethyl ketones, with a site specificity of greater than or equal to 94%.

Acetylation↗
PubMed1992

Active-site-selective labeling of blood coagulation proteinases with fluorescence probes by the use of thioester peptide chloromethyl ketones. II. Properties of thrombin derivatives as reporters of prothrombin fragment 2 binding and specificity of the labeling approach for other proteinases.

The behavior of an array of fluorescent human alpha-thrombin derivatives in reporting binding of the fragment 2 domain of prothrombin was characterized as a representative application of the active-site-selective labeling approach to studies of blood coagulation proteinase regulatory interactions. An array of 16 thrombin derivatives was prepared by affinity labeling of the proteinase active site with the thioester peptide chloromethyl ketones, N alpha-[(acetylthio)acetyl]-D-Phe-Pro-Arg-CH2Cl or N alpha-[(acetylthio)acetyl]-D-Phe-Phe-Arg-CH2Cl, followed by selective modification of the NH2OH-generated thiol group on the covalently incorporated inhibitors with each of eight thiol-reactive fluorescence probes. The changes in probe fluorescence intensity of the derivatives, signaling changes in the environment of the catalytic site associated with fragment 2 binding, appeared to be a unique and unpredictable function of the structure of the probe and the connecting peptide. These results demonstrated the utility of the labeling approach for overcoming the problem of not being able to predict which fluorescent label will provide the most useful proteinase derivative for investigating an interaction by enabling a greater variety of them to be prepared and screened for those with the most desirable properties. To determine whether the approach could be extended to other proteinases, the specificity of labeling with the fluorescence probe iodoacetamide, 5-(iodoacetamido)fluorescein, by use of the two thioester inhibitors was evaluated for several other blood coagulation proteinases and related trypsin-like enzymes. All of the proteinases were labeled in an active-site-selective manner. The combined results of quantitating the labeling reactions for the proteinase and inhibitor combinations studied thus far showed active-site-specific incorporation of 0.98 +/- 0.10 mol of inhibitor/mol of active sites and 0.92 +/- 0.11 mol of probe/mol of active sites, representing an overall greater than or equal to 93% site-specificity of labeling. These results demonstrated the broad applicability of the labeling approach for fluorescence studies of proteinases that differ greatly in their catalytic specificities.

Amino Acid Chloromethyl Ketones↗
PubMed1992

Conversion of antithrombin from an inhibitor of thrombin to a substrate with reduced heparin affinity and enhanced conformational stability by binding of a tetradecapeptide corresponding to the P1 to P14 region of the putative reactive bond loop of the inhibitor.

A synthetic tetradecapeptide having the sequence of the region of the antithrombin chain amino-terminal to the reactive bond, i.e. comprising residues P1 to P14, was shown to form a tight equimolar complex with antithrombin. A similar complex has previously been demonstrated between alpha 1-proteinase inhibitor and the analogous peptide of this inhibitor (Schulze, A. J., Baumann, U., Knof, S., Jaeger, E., Huber, R. and Laurell, C.-B. (1990) Eur. J. Biochem. 194, 51-56). The antithrombin-peptide complex had a conformation similar to that of reactive bond-cleaved antithrombin and, like the cleaved inhibitor, also had a higher conformational stability and lower heparin affinity than intact antithrombin. These properties suggest that the peptide bound to intact antithrombin at the same site that the P1 to P14 segment of the inhibitor occupies in reactive-bond-cleaved antithrombin, i.e. was incorporated as a sixth strand in the middle of the major beta-sheet, the A sheet. The extent of complex formation was reduced in the presence of heparin with high affinity for antithrombin, which is consistent with heparin binding and peptide incorporation being linked. Antithrombin in the complex with the tetradecapeptide had lost its ability to inactivate thrombin, but the reactive bond of the inhibitor was cleaved as in a normal substrate. These observations suggest a model, analogous to that proposed for alpha 1-proteinase inhibitor (Engh, R.A., Wright, H.T., and Huber, R. (1990) Protein Eng. 3, 469-477) for the structure of intact antithrombin, in which the A sheet contains only five strands and the P1 to P14 segment of the chain forms part of an exposed loop of the protein. The results further support a reaction model for serpins in which partial insertion of this loop into the A sheet is required for trapping of a proteinase in a stable complex, and complete insertion is responsible for the conformational change accompanying cleavage of the reactive bond of the inhibitor.

Amino Acid Sequence↗
PubMed1991

Quantitative evaluation of solution equilibrium binding interactions by affinity partitioning: application to specific and nonspecific protein-heparin interactions.

A variation of the quantitative affinity chromatography (QAC) method of Winzor, Chaiken, and co-workers for the analysis of protein-ligand interactions has been developed and used to characterize sequence-specific and nonspecific protein-heparin interactions relevant to blood coagulation. The method allows quantitation of the binding of two components, A and B, from the competitive effect of one component, B, on the partitioning of the other component, A, between an immobilized acceptor phase and solution phase at equilibrium. Under the conditions employed, the differences in total A concentrations yielding an equivalent degree of saturation of the immobilized acceptor in the absence and presence of B defines the concentration of A bound to B in solution, thereby enabling conventional Scatchard or nonlinear least-squares analysis of the A-B equilibrium interaction. Like the QAC method, quantitation of the competitor interaction does not depend on the nature of the affinity matrix interaction, which need only be described empirically. The additional advantage of the difference method is that only the total rather than the free competitor ligand concentration need be known. The method requires that the partitioning component A be univalent, but allows for multivalency in the competitor, B, and can in principle be used to study binding interactions involving nonidentical, interacting, or nonspecific overlapping sites. Both the binding constant and the stoichiometry for the specific antithrombin-heparin interaction as well as the apparent binding constant for the nonspecific thrombin-heparin interaction at low thrombin binding densities obtained using this technique were in excellent agreement with values determined using spectroscopic probes.

Antithrombin III↗
PubMed1990

Kinetic intermediates in prothrombin activation. Bovine prethrombin 1 conversion to thrombin by factor X.

Two pathways are possible during the proteolytic formation of alpha-thrombin (alpha-IIa) from prothrombin (II) or prethrombin 1 (P1). One of the pathways, with prethrombin 2 or prethrombin 2 associated with fragment 2 (P2F2) as intermediates, has long been known to exist when activation is catalyzed by Factor Xa (Xa) alone. The second pathway, with meizothrombin or meizothrombin (des fragment 1) (MzIIa(-F1)) as intermediate, has been shown to exist when Factor Va and phospholipids are present with Xa. Until now, MzIIa(-F1) has not been detected in reactions catalyzed by Xa alone. In this study, we demonstrate that P1 activation by Xa alone occurs via both pathways, and we provide rate constants and kinetic equations for calculating the relative contributions of each of the pathways to the formation of alpha-IIa by Xa. Investigation of the initial rates of proteolytic cleavage of P2F2 and P1 by Xa alone indicated first-order dependence on substrate concentration with no evidence of saturation of Xa with either substrate at concentrations as high as 200 microM. Apparent second-order rate constants (kc/Km) of 113 +/- 9 M-1 s-1 for the formation of thrombin from P2F2 and 1,410 +/- 19 M-1 s-1 for the disappearance of P1 were determined at pH 7.5, 25 degrees C, 10 mM CaCl2, 0.15 M ionic strength. A two-step sequential first-order pathway employing these rate constants for thrombin activity production from P1 via P2F2 could not, however, account for the quantity of thrombin that was produced during the early stages of P1 activation. Addition of a parallel first-order reaction to produce thrombin activity from P1 independently of P2F2, tentatively identified as the formation of MzIIa(-F1), yielded progress curves in quantitative agreement with the experimental data. kc/Km for the parallel reaction was estimated to be 98 +/- 10 M-1 s-1. Independent determination of the second-order rate constant for the cleavage of isolated MzIIa (-F1), 15,000 +/- 420 M-1 s-1, indicated that MzIIa(-F1) could meet the kinetic requirements for an intermediate in the parallel activation pathway. The transient formation of MzIIa (-F1), as well as the generation of alpha-IIa, was directly demonstrated during activation of P1 by active site-affinity labeling of the reaction products with a biotin derivative of D-Phe-Pro-Arg chloromethyl ketone and visualization by semiquantitative Western blotting.(ABSTRACT TRUNCATED AT 400 WORDS)

Animals↗
PubMed1989

Isolation of human blood coagulation alpha-factor Xa by soybean trypsin inhibitor-sepharose chromatography and its active-site titration with fluorescein mono-p-guanidinobenzoate.

A method based on active-site affinity chromatography on soybean trypsin inhibitor (SBTI)-Sepharose was developed for isolation of human factor Xa in primarily the undergraded alpha-form. The chromatography procedure separated factor Xa from factor X, the Russel's viper venom proteinase used to activate factor X, and traces of contaminating thrombin. alpha-Factor Xa was unstable at pH 7.6 and 25 degrees C, undergoing slow proteolytic degradation to functionally heterogeneous products as evidenced by the greater loss of coagulation assay activity compared to activity measured with a chromogenic substrate. The results of monitoring factor Xa degradation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis were consistent with proteolysis of the light chain as a major component reaction occurring in parallel with slower proteolysis of the heavy chain. The decreased rates of these reactions at pH 6.0 enabled isolation and storage of factor Xa in greater than or equal to 88% alpha-form and minimized the heterogeneity due to proteolytic degradation. Characterization of the reaction of fluorescein mono-p-guanidinobenzoate (FMGB) with human and bovine factor Xa isolated by SBTI-Sepharose chromatography demonstrated its utility as a sensitive reagent for continuous fluorometric active-site titration. Analysis of the reaction kinetics as a function of FMGB and human factor Xa concentrations in G/2 0.3, pH 7.4, buffer at 25 degrees C indicated that the ratio of acylation to deacylation rate constants was greater than 200 and that the Km for FMGB was 0.06-0.11 microM, predicting pre-steady-state burst amplitudes of greater than or equal to 96-98% of the active-site concentration at FMGB concentrations greater than or equal to 5 microM. Human factor Xa active-site concentrations were consistent with 82-99% active preparations when compared with the protein concentrations determined from the 280-nm absorbance. Concentrations of human alpha-factor Xa as low as 20 nM could be measured with FMGB, indicating a sensitivity approximately 50 times greater than that measured by spectrophotometric active-site titration with p-nitophenyl p'-guanidinobenzoate.

Binding Sites↗
PubMed1988

Active site selective labeling of serine proteases with spectroscopic probes using thioester peptide chloromethyl ketones: demonstration of thrombin labeling using N alpha-[(acetylthio)acetyl]-D-Phe-Pro-Arg-CH2Cl.

The feasibility of a new approach to incorporation of spectroscopic probes into the active sites of certain serine proteases has been demonstrated. The method is based on inactivation of a serine protease with a thioester derivative of a peptide chloromethyl ketone. The thiol group generated by reaction of the covalent enzyme-inhibitor complex with NH2OH provides a unique site for subsequent labeling with thiol-reactive probes. To evaluate the method, N alpha-[(acetylthio)acetyl]-D-Phe-Pro-Arg-CH2Cl was synthesized by reaction of the thrombin-specific tripeptide chloromethyl ketone with succinimidyl (acetylthio)acetate and purified by sulfopropyl-Sephadex and Sephadex G-10 chromatography. Reverse-phase high-performance liquid chromatography indicated that the product was 90 +/- 3% pure. The compound was quantitated by using 5,5'-dithiobis(2-nitrobenzoic acid) to measure the concentration of thiol produced in the presence of NH2OH. On this basis, titrations of the irreversible loss of human alpha-thrombin activity had end points of 1.1 +/- 0.1 mol of inhibitor/mol of active sites, indicating a 1:1 stoichiometry for inactivation. Incubation of N alpha-[(acetylthio)acetyl]-D-Phe-Pro-Arg-thrombin with 5-(iodoacetamido)fluorescein in the presence of NH2OH resulted in incorporation of 0.96 mol of the fluorescence probe/mol of active sites and the appearance of fluorescein fluorescence associated with the active site containing B-chain on sodium dodecyl sulfate-polyacrylamide gels. Fluorescence labeling of thrombin required reaction of the inhibitor at the active site as well as subsequent generation of the thiol group with NH2OH. It is concluded that active site selective labeling can be achieved by using this approach, which is likely to be applicable to other proteases, peptide chloromethyl ketones, and a wide variety of probes.

Amino Acid Chloromethyl Ketones↗
PubMed1987

Acceleration of surface-dependent autocatalytic activation of blood coagulation factor XII by divalent metal ions.

The effect of divalent metal ions on the rate of dextran sulfate dependent autocatalytic activation of human blood coagulation factor XII was studied at pH 7.4 and 25 degrees C. Zn2+ and Cu2+, but not Co2+, increased the rate of factor XII activation induced by dextran sulfate with optimum effects at approximately 5 and 1 microM, respectively, while Ca2+ acceleration required much higher concentrations (millimolar). Further investigation of the effect of Zn2+ on factor XII activation demonstrated a complete dependence on the presence of dextran sulfate, lack of inhibition by soybean trypsin inhibitor, the appearance of alpha-XIIa as the primary reaction product, and reaction kinetics characteristic of an autocatalytic process. These results were consistent with Zn2+ affecting only the rate of surface-mediated factor XII autoactivation. The initial turnover velocity of dextran sulfate induced factor XII autoactivation increased linearly with factor XII concentration in the absence of Zn2+ up to 0.9 microM factor XII but showed saturation behavior over this same concentration range in the presence of 5 microM Zn2+, indicating that Zn2+ increased the reaction rate primarily by lowering the apparent Km. Comparison of the kinetics of autoactivation at mu = 0.15 and 0.24 revealed that the enhancement in the apparent kcat/Km brought about by Zn2+ increased from 19-fold to 520-fold, respectively, due to a differential dependence of the Zn2+-stimulated and unstimulated reactions on ionic strength.(ABSTRACT TRUNCATED AT 250 WORDS)

Cations, Divalent↗
PubMed1985

Protein-protein interactions in contact activation of blood coagulation. Binding of high molecular weight kininogen and the 5-(iodoacetamido) fluorescein-labeled kininogen light chain to prekallikrein, kallikrein, and the separated kallikrein heavy and light chains.

Binding of the 5-(iodoacetamido)fluorescein (IAF)-labeled high molecular weight (HMW) kininogen light chain to prekallikrein and D-Phe-Phe-Arg-CH2Cl-inactivated kallikrein was monitored by a 0.040 +/- 0.002 increase in fluorescence anisotropy. Indistinguishable average dissociation constants and stoichiometries of 14 +/- 3 nM and 1.1 +/- 0.1 mol of prekallikrein/mol of IAF-light chain and 17 +/- 3 nM and 0.9 +/- 0.1 mol of kallikrein/mol of IAF-light chain were determined for these interactions at pH 7.4, mu 0.14 and 22 degrees C. Prekallikrein which had been reduced and alkylated in 6 M guanidine HCl lost the ability to increase the fluorescence anisotropy of the IAF-kininogen light chain, suggesting that the native tertiary structure was required for tight binding. The kallikrein heavy and light chains were separated on the basis of the affinity of the heavy chain for HMW-kininogen-Sepharose, after mild reduction and alkylation of kallikrein under nondenaturing conditions. Under these conditions, alkylation with iodo [14C]acetamide demonstrated that only limited chemical modification had occurred. Binding of the IAF-kininogen light chain to the isolated alkylated kallikrein heavy chain, when compared to prekallikrein and kallikrein, was characterized by an indistinguishable increase in fluorescence anisotropy, average dissociation constant of 14 +/- 3 nM, and stoichiometry of 1.2 +/- 0.1 mol of kallikrein heavy chain/mol of IAF-light chain. In contrast, no binding of the D-Phe-Phe-Arg-CH2Cl-inactivated kallikrein light chain was detected at concentrations up to 500 nM. Furthermore, 300 nM kallikrein light chain did not affect IAF-kininogen light chain binding to prekallikrein, kallikrein, or the kallikrein heavy chain. The binding of monomeric single chain HMW-kininogen to prekallikrein, kallikrein, and the kallikrein heavy and light chains was studied using the IAF-kininogen light chain as a probe. Analysis of the competitive binding of HMW-kininogen gave average dissociation constants and stoichiometries of 12 +/- 2 nM and 1.2 +/- 0.1 mol of prekallikrein/mol of HMW-kininogen, 15 +/- 2 nM and 1.3 +/- 0.1 mol of kallikrein/mol of HMW-kininogen, 14 +/- 3 nM and 1.4 +/- 0.2 mol of kallikrein heavy chain/mol of HMW-kininogen, and no detectable effect of 300 nM kallikrein light chain on these interactions. We conclude that a specific, nonenzymatic interaction between sites located exclusively on the light chain of HMW-kininogen and the heavy chain of kallikrein or prekallikrein is responsible for the formation of 1:1 noncovalent complexes between these proteins.

Binding, Competitive↗
PubMed1983

Protein-protein interactions in contact activation of blood coagulation. Characterization of fluorescein-labeled human high molecular weight kininogen-light chain as a probe.

Limited proteolysis of high molecular weight kininogen by kallikrein resulted in the generation of an inactive heavy chain of Mr = 64,000 and active light chains of Mr = 64,000 and 51,000 when analyzed by sodium dodecyl sulfate (SDS)-gel electrophoresis under reducing conditions. Starting with kininogen from outdated plasma, a light chain with an apparent molecular weight of 51,000 on 7.5% SDS gels was purified and characterized. Molecular weights of 28,900 +/- 1,100 and 30,500 +/- 1,600 were obtained by gel filtration of the reduced and alkylated protein in 6 M guanidine HCl and equilibrium sedimentation under nondenaturing conditions in the air-driven ultracentrifuge, respectively. The light chain stained positively with periodic acid-Schiff reagent on SDS gels indicating that covalently attached carbohydrate may be responsible for the anomalously high molecular weight estimated by SDS-gel electrophoresis. A single light chain thiol group reacted with 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) in the presence and absence of 6 M guanidine HCl. Specific fluorescent labeling of the thiol group with 5-(iodoacetamido)fluorescein (IAF) occurred without loss of clotting activity. Addition of purified human plasma prekallikrein to the IAF-light chain resulted in a maximum increase in fluorescence anisotropy of 0.041 +/- 0.001 and no change in the fluorescence intensity. Fluorescence anisotropy measurements of the equilibrium binding of prekallikrein to the IAF-light chain yielded an average Kd of 17.3 +/- 2.5 nM and stoichiometry of 1.07 +/- 0.07 mol of prekallikrein/mol of IAF-light chain. Measurements of the interaction of prekallikrein with iodoacetamide-alkylated light chain using the IAF-light chain as a probe gave an average Kd of 16 +/- 4 nM and stoichiometry of 1.0 +/- 0.2 indicating indistinguishable affinities for prekallikrein.

Blood Coagulation↗
PubMed1983

Molecular weight of human high-molecular-weight kininogen light chain by equilibrium sedimentation in an air-driven ultracentrifuge.

High-molecular-weight kininogen, a nonenzymatic glycoprotein of the intrinsic blood coagulation system, is proteolytically cleaved by kallikrein as an early event in the activation of this system. The light chain of cleaved kininogen retains the ability to form specific noncovalent complexes with prekallikrein and factor XI, other members of this system. We have determined the molecular weight of human kininogen light chain by equilibrium sedimentation in buffers of differing density, using an air-driven benchtop ultracentrifuge. The resulting molecular weight (30,500 +/- 800 g/mol) and partial specific volume (0.660 +/- 0.008 ml/g) are consistent with the idea that a sizeable fraction of the carbohydrate of high-molecular-weight kininogen is associated with the light chain. This level of precision is relatively easy to attain. The procedures are detailed, along with expressions for error propagation, to permit ready application of the technique.

Air↗