Biomedical subjects

P Exbrayat

Publications and source records attributed to P Exbrayat.

7 recordsLinked to original sources

PubMed2001

Influence of gamma-irradiation sterilization on the structural defects of sapphire single crystals (alpha-Al(2)O(3)).

The influence of sterilization by gamma rays on the structure and the electrical behaviour of sapphire single crystal (alpha-Al(2)O(3)) was studied successively by thermoluminescence, by cathodoluminescence and by observation of the scanning electron microscope mirror effect. The mirror method allowed us to measure the capacity of an insulating material to trap electrons. The structural analysis of the alpha-Al(2)O(3) showed that there were oxygen vacancies, as well as chromium and titanium impurities. It was possible to demonstrate that these defects, especially the oxygen vacancies, are in a different state after a 30 kilogray irradiation. The valency state changes of these defects and the presence of trapped charges are accompanied by a deformation of the crystalline lattice which results in a modification of its electrical properties. At room temperature, the irradiated alpha-Al(2)O(3), unlike non irradiated alpha-Al(2)O(3), is capable of trapping electrons. It can be concluded that gamma-ray sterilization modifies the cohesive energy of alpha-Al(2)O(3), which could lead to mechanical changes (surface charge, friction, wear, fracture strength, em leader) in this material.

Aluminum Oxide↗

PubMed1999

An image analysis method for the study of cell adhesion to biomaterials.

This fluorescence image analysis method for the quantitative determination of cell adhesion on biomaterials allows bone cells labelled with propidium iodide to be counted automatically, directly on their support. The reliability of the estimation by fluorescence image analysis was validated by comparison with visual counting and with results obtained by an electronic particle counter. In this way it was possible to demonstrate that the adhesive properties of bone cells are dependent on the type of substrate--enstatite (MgO, SiO2, CaO-P2O5-Al2O3), Thermanox (modified polyethyleneterephthalate), or glass. In contrast, the spread of the cell cytoplasm, labelled with fluorescein isothiocyanate and measured by image analysis, does not vary significantly according to the substrate. The characterisation by SKIZ tessellation of the spatial cell arrangement shows that the bone cells have a random organisation on Thermanox and glass, whereas they form aggregates on enstatite.

Animals↗

PubMed1998

Effects of new machinable ceramic on behavior of rat bone cells cultured in vitro.

The behavior of cultured rat bone cells growing on modified polyethylene terephthalate (mPET), glass, and machinable ceramic substrates containing enstatite (MgO, SiO2) and glass (CaO-P2O5-Al2O3) was studied. Cell attachment was measured directly on the substrates using an image analysis system. Electron microscopy observations and the MTT test revealed that cells are able to spread and proliferate on the material surface, keeping a healthy ultrastructure on all materials tested in the present study. After having colonized the surface of the materials, as shown by immunocytochemistry, the cells synthesize an osteoid-like matrix composed of osteocalcin, type I collagen, and fibronectin fibrils. The titration of alkaline phosphatase activity showed that the cells grown on the ceramic exhibit a greater osteogenic activity than those grown on controls (glass and mPET). This osteogenic activity results in a mineralization of the extracellular matrix in cultures on ceramic or plastic whereas only few calcium phosphate crystallite traces were revealed by Von Kossa staining on glass. Enstatite constitutes, therefore, an environment compatible with in vitro bone cell life.

Animals↗

PubMed1998

Cytokeratin expression in human oral gingival epithelial cells: in vitro regulation by titanium-based implant materials.

To evaluate whether cytokeratin expression in human oral epithelial cells could be influenced by implant materials used in dental surgery, passaged human oral gingival epithelial cells were seeded on commercially pure titanium (CP-Ti) or on Ti6Al4V titanium alloy. Confluence was achieved after about 15 days on both substrates. Cells formed at that time, an organized layer of densely packed polygonal cells, and harbored a filamentous cytokeratin network typical of epithelial cells. Immunochemistry and immunoblot analysis were used to detect modifications of the amount of individual CK polypeptides (CK7, 8, 13, 18 and 19) in function of the culture substrate. Results showed that the level of CK8, CK18 and CK19 expression was not altered whatever the culture substrate used. The expression of CK13 was reduced in epithelial cells cultured on the titanium alloy, as compared with commercially pure titanium. Conversely, the level of CK7 was higher on the Ti6Al4V alloy than on commercially pure titanium. This study suggests that titanium-based implant materials could influence differently the phenotype of oral gingival epithelial cells.

Alloys↗

PubMed1994

Identification of Moraxella bovis and related species from calves with IBK and goats by qualitative genetic transformation assay.

Eight Moraxella bovis strains isolated from bovine pink eye, 16 Moraxella bovis related strains isolated from healthy goats nasal flora, one nonhemolytic Moraxella sp. isolated from bovine conjunctivitis and different collection strains of Moraxella and Branhamella genus were studied through the combined use of qualitative genetic transformation assay and the ability to grow on a moraxella bovis defined medium (medium MB). Crude DNA extracted from the strains studied were used to transform two mutant auxotroph competent strains of Moraxella bovis CIP 103741 and CIP 103743. Non-specific positive transformation was obtained with mutant assay strain CIP 103743 when treated with DNA from caprine or bovine Moraxella strains, collection strains of Moraxella bovis, Moraxella lacunata, Moraxella nonliquefaciens and strains of Branhamella genus, whereas specific transformation was observed with mutant assay CIP 103741 when treated only with DNA from all the Moraxella bovis (collection and clinical isolates) and 14 of the 16 caprine Moraxella bovis related strains. The specificity and the simplicity of the test make it suitable for use in clinical laboratories.

Animals↗

PubMed1987

Evaluation of the biocompatibility of a Ni-Cr-Mo dental alloy with human gingival explant culture in vitro: morphological study, immunodetection of fibronectin, and collagen production.

This study was undertaken to evaluate the biocompatibility of a Ni-Cr-Mo dental casting alloy by an in vitro explant culture method. Through ultrastructural features, the immunolabelling of fibronectin, and the immunodetection of type I and III collagen production, we investigated the behaviour of gingival cells (both fibroblasts and epithelial cells) in contact with the alloy in comparison with control cultures. Our results indicate that cultured gingival cells present a well preserved ultrastructure and synthesized fibronectin (the main glycoprotein involved in adhesion to substrates). The alteration of collagen production concerned only type III collagen which decreased significantly in the cultures on the dental alloy.

Cells, Cultured↗

PubMedDate not supplied

Single tooth replacement using a one-piece screw-retained restoration.

This article reviews and illustrates several options available with single tooth implant prostheses. For use with internal hex implants, the authors prefer one-piece screw-retained restorations due to their easy retrievability, absence of cement, and remarkable aesthetics. The treatment procedure is outlined from presurgical prosthetic planning and surgery to the placement of the final prosthesis. The advantages and disadvantages of the technique are reviewed. The use of wide or narrow screw access channels is discussed. Selection of torque instruments and the proper levels of torque when tightening the screws are evaluated. Three clinical cases are presented to illustrate the principles reviewed in the text. The learning objective of this article is to provide up-to-date information on an implant system for screw-retained single tooth restorations.

Adolescent↗