PubMed Health⌕ Search

Biomedical subjects

P K Jadhav

Publications and source records attributed to P K Jadhav.

At least 19 recordsLinked to original sources

Inhibition of human endogenous retrovirus-K10 protease in cell-free and cell-based assays.

A full-length and C-terminally truncated version of human endogenous retrovirus (HERV)-K10 protease were expressed in Escherichia coli and purified to homogeneity. Both versions of the protease efficiently processed HERV-K10 Gag polyprotein substrate. HERV-K10 Gag was also cleaved by human immunodeficiency virus, type 1 (HIV-1) protease, although at different sites. To identify compounds that could inhibit protein processing dependent on the HERV-K10 protease, a series of cyclic ureas that had previously been shown to inhibit HIV-1 protease was tested. Several symmetric bisamides acted as very potent inhibitors of both the truncated and full-length form of HERV-K10 protease, in subnanomolar or nanomolar range, respectively. One of the cyclic ureas, SD146, can inhibit the processing of in vitro translated HERV-K10 Gag polyprotein substrate by HERV-K10 protease. In addition, in virus-like particles isolated from the teratocarcinoma cell line NCCIT, there is significant accumulation of Gag and Gag-Pol precursors upon treatment with SD146, suggesting the compound efficiently blocks HERV-K Gag processing in cells. This is the first report of an inhibitor able to block cell-associated processing of Gag polypeptides of an endogenous retrovirus.

Amino Acid Sequence↗

Isoxazolines as potent antagonists of the integrin alpha(v)beta(3).

Starting with lead compound 2, we sought to increase the selectivity for alpha(v)beta(3)-mediated cell adhesion by examining the effects of structural changes in both the guanidine mimetic and the substituent alpha to the carboxylate. To prepare some of the desired aminoimidazoles, a novel reductive amination utilizing a trityl-protected aminoimidazole was developed. It was found that guanidine mimetics with a wide range of pK(a)'s were potent antagonists of alpha(v)beta(3). In general, it appeared that an acylated 2-aminoimidazole guanidine mimetic imparted excellent selectivity for alpha(v)beta(3)-mediated adhesion versus alpha(IIb)beta(3)-mediated platelet aggregation, with selectivity of approximately 3 orders of magnitude observed for compounds 3g and 3h. It was also found in this series that the alpha-substituent was required for potent activity and that 2,6-disubstituted arylsulfonamides were optimal. In addition, the selective alpha(v)beta(3) antagonist 3h was found to be a potent inhibitor of alpha(v)beta(3)-mediated cell migration.

Cell Adhesion↗

Disubstituted indazoles as potent antagonists of the integrin alpha(v)beta(3).

A new series of indazole-containing alpha(v)beta(3) integrin antagonists is described. Starting with lead compound 18a, variations in a number of structural features were explored with respect to inhibition of the binding of beta(3)-transfected 293 cells to fibrinogen and to selectivity for alpha(v)beta(3) over GPIIbIIIa, another RGD-binding integrin. Indazoles attached to a 2-aminopyridine or 2-aminoimidazole by a propylene linker at the indazole 1-position and to a diaminopropionate derivative via a 5-carboxylate amide provided the best potency with moderate selectivity. Several differences in the SAR of the diaminopropionate moiety were observed between this series and a series of isoxazoline-based selective GPIIbIIIa antagonists. Compound 34a (SM256) was a potent antagonist of alpha(v)beta(3) (IC(50) 2.3 nM) with 9-fold selectivity over GPIIbIIIa.

Cell Adhesion↗

Inhibition of neointima formation by a nonpeptide alpha(v)beta(3) integrin receptor antagonist in a rabbit cuff model.

This study was performed to determine whether a highly selective nonpeptide alpha(v)beta(3) antagonist (SH306) would prove effective in inhibiting neointima formation in a rabbit cuff model. The animals were dosed with SH306, 5 mg/kg i.v., followed by 10 mg/kg s. c., 3 times daily for 3 days, or with vehicle (10% DMAC). Rabbits were sacrificed and perfused on days 1, 3, and 21; the vessels were paraffin embedded. A reduction in the intima/media (I/M) of the SH306-treated rabbits, as compared with the vehicle-treated control group, was noted (0.20 vs 0.36 [n = 4]). A significant increase in the area of the media was observed in the SH306-treated group versus the control group (0.20 vs 0.13). No difference was observed in cell proliferation between SH306 and vehicle after 1-day and 3-day dosing. Thrombi were found in 43% of the control vessels and in only 14% of the drug-treated vessels. No anticoagulant was used during the surgical procedure. No increase in inhibition of GPIIb/IIIa was observed in SH306-treated animals, as compared with the vehicle control group. We conclude that selective inhibition of alpha(v)beta(3) reduced neointima formation in a rabbit model at 3 weeks.

Animals↗

Alphavbeta3 integrin binding affinity and specificity of SM256 in various species.

This study was undertaken to define the alphavbeta3 binding affinity and specificity of the low-molecular-weight nonpeptide integrin antagonist, SM256. SM256 demonstrated high potency (IC50, 0.057+/-0.030 nM) in inhibiting vitronectin binding to purified human alphavbeta3 receptors. Additionally, SM256 inhibited alphavbeta3-mediated human umbilical vein endothelial cell (HUVEC) or 293/beta3 (beta3-transfected cell line) adhesion to fibrinogen with IC50 values of 0.0054+/-0.0058 and 0.0023+/-0.0012 microM, respectively. SM256 demonstrated a relatively high degree of specificity for human alphavbeta3-mediated functions as compared with other human integrins including alphavbeta5 (IC50, 0.92+/-0.69 microM), alphaIIbbeta3 (IC50, 0.72+/-0.07 microM), alpha4/beta1 (IC50, >100 microM) and alpha5/beta1 (IC50, 2.3+/-2.1 microM). SM256 demonstrated different degree of species specificity in blocking alphavbeta3-mediated cellular adhesion with relatively higher affinity to dog (IC50, 0.005+/-0.002 microM), rabbit (IC50, 0.021+/-0.01 microM), mouse (IC50, 0.035+/-0.01 microM), and pig (IC50, 0.41+/-0.24 microM) endothelial or smooth-muscle cell alphavbeta3-mediated adhesion. Additionally, SM256 demonstrated high degree of alphavbeta3 specificity as compared with alphavbeta5, alpha5beta1, or alphaIIbbeta3-mediated binding in these species. SM256 is a potent alphavbeta3, antagonist with high affinity and specificity for alphavbeta3-mediated functions. Additionally, a comparable alphavbeta3 affinity for SM256 was demonstrated with endothelial cells obtained from various species (dog, mouse, rabbit, and pig) as compared with that from human.

Animals↗

Counteracting HIV-1 protease drug resistance: structural analysis of mutant proteases complexed with XV638 and SD146, cyclic urea amides with broad specificities.

The long-term therapeutic benefit of HIV antiretroviral therapy is still threatened by drug-resistant variants. Mutations in the S1 subsite of the protease are the primary cause for the loss of sensitivity toward many HIV protease inhibitors, including our first-generation cyclic urea-based inhibitors DMP323 and DMP450. We now report the structures of the three active-site mutant proteases V82F, I84V, and V82F/I84V in complex with XV638 and SD146, two P2 analogues of DMP323 that are 8-fold more potent against the wild type and are able to inhibit a broad panel of drug-resistant variants [Jadhav, P. K., et al. (1997) J. Med. Chem. 40, 181-191]. The increased efficacy of XV638 and SD146 is due primarily to an increase in P2-S2 interactions: 30-40% more van der Waals contacts and two to four additional hydrogen bonds. Furthermore, because these new interactions do not perturb other subsites in the protease, it appears that the large complementary surface areas of their P2 substituents compensate for the loss of P1-S1 interactions and reduce the probability of selecting for drug-resistant variants.

Amino Acid Substitution↗

Cyclic HIV protease inhibitors: design and synthesis of orally bioavailable, pyrazole P2/P2' cyclic ureas with improved potency.

Highly potent HIV-1 protease (HIVPR) inhibitors have been designed and synthesized by introducing bidentate hydrogen-bonding oxime and pyrazole groups at the meta-position of the phenyl ring on the P2/P2' substituents of cyclic ureas. Nonsymmetrical cyclic ureas incorporating 3(1H)-pyrazolylbenzyl as P2 and hydrophilic functionalities as P2' show potent protease inhibition and antiviral activities against HIV and have good oral bioavailabilities. The X-ray structure of HIVPR.10A complex confirms that the two pyrazole rings of 10A form bidentate hydrogen bonds with the side-chain oxygen (C=O) and backbone nitrogen (N-H) of Asp30/30' of HIVPR.

Administration, Oral↗

Molecular recognition of cyclic urea HIV-1 protease inhibitors.

As long as the threat of human immunodeficiency virus (HIV) protease drug resistance still exists, there will be a need for more potent antiretroviral agents. We have therefore determined the crystal structures of HIV-1 protease in complex with six cyclic urea inhibitors: XK216, XK263, DMP323, DMP450, XV638, and SD146, in an attempt to identify 1) the key interactions responsible for their high potency and 2) new interactions that might improve their therapeutic benefit. The structures reveal that the preorganized, C2 symmetric scaffolds of the inhibitors are anchored in the active site of the protease by six hydrogen bonds and that their P1 and P2 substituents participate in extensive van der Waals interactions and hydrogen bonds. Because all of our inhibitors possess benzyl groups at P1 and P1', their relative binding affinities are modulated by the extent of their P2 interactions, e.g. XK216, the least potent inhibitor (Ki (inhibition constant) = 4.70 nM), possesses the smallest P2 and the lowest number of P2-S2 interactions; whereas SD146, the most potent inhibitor (Ki = 0.02 nM), contains a benzimidazolylbenzamide at P2 and participates in fourteen hydrogen bonds and approximately 200 van der Waals interactions. This analysis identifies the strongest interactions between the protease and the inhibitors, suggests ways to improve potency by building into the S2 subsite, and reveals how conformational changes and unique features of the viral protease increase the binding affinity of HIV protease inhibitors.

Anti-HIV Agents↗

The synthesis of symmetrical and unsymmetrical P1/P1' cyclic ureas as HIV protease inhibitors.

Cyclic urea SD146, a potent HIV protease inhibitor bearing a flat resistance profile, possessed poor solubility and bioavailability, which precluded further development of the compound. In an effort to improve upon the pharmacokinetic profile of the compound, several analogs modified at the P1/P1' residues were prepared and evaluated. Several of those compounds displayed significant improvement of physical properties.

Binding Sites↗

Nonpeptide cyclic cyanoguanidines as HIV-1 protease inhibitors: synthesis, structure-activity relationships, and X-ray crystal structure studies.

Comparison of the high-resolution X-ray structures of the native HIV-1 protease and its complexes with the inhibitors suggested that the enzyme flaps are flexible. The movement at the tip of the flaps could be as large as 7 A. On the basis of this observation, cyclic cyanoguanidines have been designed, synthesized, and evaluated as HIV-1 protease (PR) inhibitors. Cyclic cyanoguanidines were found to be very potent inhibitors of HIV-1 protease. The choice of cyclic cyanoguanidines over cyclic guanidines was based on the reduced basicity of the former. X-ray structure studies of the HIV PR complex with cyclic cyanoguanidine demonstrated that in analogy to cyclic urea, cyclic cyanoguanidines also displace the unique structural water molecule. The structure-activity relationship of the cyclic cyanoguanidines is compared with that of the corresponding cyclic urea analogues. The differences in binding constants of the two series of compounds have been rationalized using high-resolution X-ray structure information.

Anti-HIV Agents↗

Improved P1/P1' substituents for cyclic urea based HIV-1 protease inhibitors: synthesis, structure-activity relationship, and X-ray crystal structure analysis.

We present several novel P1/P1' substituents that can replace the characteristic benzyl P1/P1' moiety of the cyclic urea based HIV protease inhibitor series. These substituents typically provide 5-10-fold improvements in binding affinity compared to the unsubstituted benzyl analogs. The best substituent was the 3,4-(ethylenedioxy)benzyl group. Proper balancing of the molecule's lipophilicity facilitated the transfer of this improved binding affinity into a superior cellular antiviral activity profile. Several analogs were evaluated further for protein binding and resistance liabilities. Compound 18 (IC90 = 8.7 nM) was chosen for oral bioavailability studies based on its log P and solubility profile. A 10 mg/kg dose in dogs provided modest bioavailability with Cmax = 0.22 microg/mL. X-ray crystallographic analysis of two analogs revealed several interesting features responsible for the 3,4-(ethylenedioxy)benzyl-substituted analog's potency: (1) Comparing the two complexes revealed two distinct binding modes for each P1/P1' substituent; (2) The ethylenedioxy moieties are within 3.6 A of Pro 81 providing additional van der Waals contacts missing from the parent structure; (3) The enzyme's Arg 8 side chain moves away from the P1 substituent to accommodate the increased steric volume while maintaining a favorable hydrogen bond distance between the para oxygen substituent and the guanidine NH.

Animals↗

Cyclic urea amides: HIV-1 protease inhibitors with low nanomolar potency against both wild type and protease inhibitor resistant mutants of HIV.

Cyclic urea amides, a novel series of HIV-1 protease (HIV PR) inhibitors, have increased activity against drug-resistant mutants of the HIV PR. The design strategy for these inhibitors is based on the hypotheses that (i) the hydrogen-bonding interactions between the inhibitor and the protease backbone will remain constant for wild-type and mutant enzymes and (ii) inhibitors which are capable of forming many nonbonded interactions, distributed throughout the active site, will experience a lower percent change in binding energy as a result of mutation in the target enzyme than those that form fewer interactions by partial occupation of the active site. The cyclic urea amide, SD146, forms 14 hydrogen bonds and 191 van der Waals contacts to HIV PR. SD146 is a very potent antiviral agent (IC90 = 5.1 nM) against wild-type HIV and maintains the same or improved level of high potency against a range of mutant strains of HIV with resistance to a wide variety of HIV protease inhibitors.

Amides↗

Cyclic HIV protease inhibitors: synthesis, conformational analysis, P2/P2' structure-activity relationship, and molecular recognition of cyclic ureas.

High-resolution X-ray structures of the complexes of HIV-1 protease (HIV-1PR) with peptidomimetic inhibitors reveal the presence of a structural water molecule which is hydrogen bonded to both the mobile flaps of the enzyme and the two carbonyls flanking the transition-state mimic of the inhibitors. Using the structure-activity relationships of C2-symmetric diol inhibitors, computed-aided drug design tools, and first principles, we designed and synthesized a novel class of cyclic ureas that incorporates this structural water and preorganizes the side chain residues into optimum binding conformations. Conformational analysis suggested a preference for pseudodiaxial benzylic and pseudodiequatorial hydroxyl substituents and an enantiomeric preference for the RSSR stereochemistry. The X-ray and solution NMR structure of the complex of HIV-1PR and one such cyclic urea, DMP323, confirmed the displacement of the structural water. Additionally, the bound and "unbound" (small-molecule X-ray) ligands have similar conformations. The high degree of preorganization, the complementarity, and the entropic gain of water displacement are proposed to explain the high affinity of these small molecules for the enzyme. The small size probably contributes to the observed good oral bioavailability in animals. Extensive structure-based optimization of the side chains that fill the S2 and S2' pockets of the enzyme resulted in DMP323, which was studied in phase I clinical trials but found to suffer from variable pharmacokinetics in man. This report details the synthesis, conformational analysis, structure-activity relationships, and molecular recognition of this series of C2-symmetry HIV-1PR inhibitors. An initial series of cyclic ureas containing nonsymmetric P2/P2' is also discussed.

Animals↗

Preparation and structure-activity relationship of novel P1/P1'-substituted cyclic urea-based human immunodeficiency virus type-1 protease inhibitors.

A series of novel P1/P1'-substituted cyclic urea-based HIV-1 protease inhibitors was prepared. Three different synthetic schemes were used to assemble these compounds. The first approach uses amino acid-based starting materials and was originally used to prepare DMP 323. The other two approaches use L-tartaric acid or L-mannitol as the starting material. The required four contiguous R,S,S,R centers of the cyclic urea scaffold are introduced using substrate control methodology. Each approach has specific advantages based on the desired P1/P1' substituent. Designing analogs based on the enzyme's natural substrates provided compounds with reduced activity. Attempts at exploiting hydrogen bond sites in the S1/S1' pocket, suggested by molecular modeling studies, were not fruitful. Several analogs had better binding affinity compared to our initial leads. Modulating the compound's physical properties led to a 10-fold improvement in translation resulting in better overall antiviral activity.

Azepines↗

Improved cyclic urea inhibitors of the HIV-1 protease: synthesis, potency, resistance profile, human pharmacokinetics and X-ray crystal structure of DMP 450.

BACKGROUND: Effective HIV protease inhibitors must combine potency towards wild-type and mutant variants of HIV with oral bioavailability such that drug levels in relevant tissues continuously exceed that required for inhibition of virus replication. Computer-aided design led to the discovery of cyclic urea inhibitors of the HIV protease. We set out to improve the physical properties and oral bioavailability of these compounds. RESULTS: We have synthesized DMP 450 (bis-methanesulfonic acid salt), a water-soluble cyclic urea compound and a potent inhibitor of HIV replication in cell culture that also inhibits variants of HIV with single amino acid substitutions in the protease. DMP 450 is highly selective for HIV protease, consistent with displacement of the retrovirus-specific structural water molecule. Single doses of 10 mg kg-1 DMP 450 result in plasma levels in man in excess of that required to inhibit wild-type and several mutant HIVs. A plasmid-based, in vivo assay model suggests that maintenance of plasma levels of DMP 450 near the antiviral IC90 suppresses HIV protease activity in the animal. We did identify mutants that are resistant to DMP 450, however; multiple mutations within the protease gene caused a significant reduction in the antiviral response. CONCLUSIONS: DMP 450 is a significant advance within the cyclic urea class of HIV protease inhibitors due to its exceptional oral bioavailability. The data presented here suggest that an optimal cyclic urea will provide clinical benefit in treating AIDS if it combines favorable pharmacokinetics with potent activity against not only single mutants of HIV, but also multiply-mutant variants.

Administration, Oral↗