Biomedical subjects

P Lodeiro

Publications and source records attributed to P Lodeiro.

6 recordsLinked to original sources

PubMed2006

Batch desorption studies and multiple sorption-regeneration cycles in a fixed-bed column for Cd(II) elimination by protonated Sargassum muticum.

The protonated alga Sargassum muticum was employed in batch desorption studies to find the most appropriate eluting agent for Cd(II)-laden biomass regeneration. Eleven types of eluting solutions at different concentrations were tested, finding elution efficiencies higher than 90% for most of the desorbents studied. Total organic carbon and biomass weight loss measurements were made. The reusability of the protonated alga was also studied using a fixed-bed column. Eleven consecutive sorption-regeneration cycles at a flow rate of 10 mL min(-1) were carried out for the removal of 50 mg L(-1) Cd(II) solution. A 0.1M HNO(3) solution was employed as desorbing agent. The column was operated during 605 h for sorption and 66 h for desorption, equivalent to a continuous use during 28 days, with no apparent loss of sorption performance. In these cycles, no diminution of the breakthrough time was found; although, a relative loss of sorption capacity, regarding the found in the first cycle, was observed. The slope of the breakthrough curves experiments a gradual increase reaching its maximum value for the last cycle tested (40% greater than for the first one). The maximum Cd(II) concentration elution peak was achieved in 5 min or less, and the metal effluent concentration was always lower than 0.9 mg L(-1) after 1 h of elution. The maximum concentration factor was determined to be between 55 and 109.

Adsorption↗

PubMed2006

The use of protonated Sargassum muticum as biosorbent for cadmium removal in a fixed-bed column.

The protonated Sargassum muticum seaweed was studied as a possible biosorbent for cadmium removal in a fixed-bed column. The experiments were conducted in order to determine the effect of flow rate (0.42, 5, 10 and 20 mL min(-1)) and bed height (0.6 and 15.3 cm for the lowest flow rate or 7.4, 13 and 16.6 cm for the others) on breakthrough curves behaviour. The determined breakthrough and exhaustion times increased with the diminution in flow rate and with the increase in bed height. The maximum cadmium uptake capacity, obtained from the area below adsorbed cadmium concentration versus time curves, was found to remain practically constant with bed depth and flow rate. The bed depth service time (BDST) model was applied to analyse experimental data, determining the characteristic process parameters. The optimal lowest sorbent usage rate was evaluated at 2 min contact time and the minimum bed height values necessary to prevent the effluent solution concentration from exceeding 0.02 mg L(-1) at zero time were 5.3, 6.9 and 7.5 cm for flow rates of 5, 10 and 20 mL min(-1), respectively. Several empirical models proposed in the literature (Bohart-Adams, Yan, Belter and Chu models) were investigated in order to obtain the best fit of column data, describing in a simple manner the breakthrough curves. A correlation between model parameters and the variables implied in the process was attempted.

Adsorption↗

PubMed2005

The marine macroalga Cystoseira baccata as biosorbent for cadmium(II) and lead(II) removal: kinetic and equilibrium studies.

This work reports kinetic and equilibrium studies of cadmium(II) and lead(II) adsorption by the brown seaweed Cystoseira baccata. Kinetic experiments demonstrated rapid metal uptake. Kinetic data were satisfactorily described by a pseudo-second order chemical sorption process. Temperature change from 15 to 45 degrees C showed small variation on kinetic parameters. Langmuir-Freundlich equation was selected to describe the metal isotherms and the proton binding in acid-base titrations. The maximum metal uptake values were around 0.9 mmol g(-1) (101 and 186 mg g(-1) for cadmium(II) and lead(II), respectively) at pH 4.5 (raw biomass), while the number of weak acid groups were 2.2 mmol g(-1) and their proton binding constant, K(H), 10(3.67) (protonated biomass). FTIR analysis confirmed the participation of carboxyl groups in metal uptake. The metal sorption was found to increase with the solution pH reaching a plateau above pH 4. Calcium and sodium nitrate salts in solution were found to affect considerably the metal biosorption.

Biodegradation, Environmental↗

PubMed2005

Biosorption of cadmium by the protonated macroalga Sargassum muticum: binding analysis with a nonideal, competitive, and thermodynamically consistent adsorption (NICCA) model.

Protonated biomass of the seaweed Sargassum muticum was investigated for its ability to remove cadmium(II) from aqueous solutions. In this work, a nonideal, semiempirical, thermodynamically consistent (NICCA) isotherm was proposed to fit the experimental ion binding data obtained in NaNO3 0.05 mol L(-1). This model describes the competition between protons and metal ions satisfactorily. Moreover, it reflects the complexity of the macromolecular systems that take part in biosorption considering the heterogeneity of the sorbent. It was demonstrated in this work that the NICCA isotherm constitutes a great improvement with respect to a simpler Langmuir competitive equation, which was not able to describe all the experimental data satisfactorily. Potentiometric acid-base titrations in the absence of cadmium were made to estimate the maximum amount of acid functional groups (2.61 mmol g(-1)) and the conditional proton binding parameters, logK (H) (3.8) and m(H) (0.54). The values of the binding parameters for the cadmium ion were chosen to provide the best simultaneous description of the isotherm at pH 4.5, as well as the dependence of cadmium adsorption on pH. Values of logK (Cd) (3.1), n(Cd) (1.8), and p (0.19) in the case of the NICCA isotherm or logK(Cd) (2.94-3.4) for Langmuir competitive models were obtained. Kinetic experiments were performed at two different pH values (3.0 and 4.5), establishing the time dependence that represents the sorption of cadmium with a pseudo-second-order kinetic model. It was observed that 4 h is enough to ensure that the equilibrium uptake was reached.

Adsorption↗

PubMed2005

Biosorption of cadmium by biomass of brown marine macroalgae.

Five different brown seaweeds, Bifurcaria bifurcata, Saccorhiza polyschides, Ascophyllum nodosum, Laminaria ochroleuca and Pelvetia caniculata were studied for their ability to remove cadmium from aqueous solution. Kinetics of cadmium adsorption by all the algae were relatively fast, with 90% of total adsorption occurring in less than 1h. These experiments could be accurately described by a pseudo-second-order rate equation, obtaining values between 1.66x10(-3) and 9.92x10(-3) g/mgmin for the sorption rate constant k. Several equilibrium adsorption isotherms were obtained for the quantitative description of cadmium uptake. The use of the Langmuir isotherm led to values between 64 and 95 mg/g for qmax and between 0.036 and 0.094 L/mg for b. The effect of pH on biosorption was also studied. Acid-base properties of algae were studied by potentiometry to determine pK values (from 3.54 to 3.98) and the total number of acid groups.

Adsorption↗

PubMed2004

Physicochemical studies of cadmium(II) biosorption by the invasive alga in Europe, Sargassum muticum.

In recent years, there has been a significant increase in the studies concerning brown seaweed as biosorbents for metal removal owing to their high binding ability and low cost. This work reports the results of a study regarding the cadmium binding equilibria of dead biomass from the seaweed Sargassum muticum; this alga is a pest fouling organism that competes with the local fucalean species and may also interfere with the "sea industry"; therefore, it would constitute an ideal material to be used as biosorbent. Seven different treatments were tested in order to obtain a stable biomass that could be suitable for industrial use under a broad range of operational conditions. The treatments employed were protonation, chemical cross-linking with formaldehyde, KOH, Ca(OH)(2) and CaCl(2) or physical treatments with acetone and methanol. The equilibrium adsorption isotherms of Langmuir, Freundlich, and Langmuir-Freundlich were obtained for the quantitative description of the cadmium uptake. The effect of pH on biosorption equilibrium was studied at values ranging from 1 to 6, demonstrating the importance of this parameter for an accurate evaluation of the biosorption process. Maximum biosorption was found pH higher than 4.5. The maximum biosorption uptake for the raw biomass was 65 mg g(-1), while for formaldehyde cross-linking biomass the uptake increases to 99 mg g(-1) and for protonated biomass to 95 mg g(-1). Potentiometric titrations were carried out to estimate the total number of weak acid groups and to obtain their apparent pK value, 3.85, using the Katchalsky model. Kinetic studies varying cadmium concentration, algal dose, and ionic strength were carried out. Over 95% of the maximum cadmium uptake was achieved within 45 min, so the process can be considered relatively fast. A pseudo-second-order model, for the kinetics of cadmium biosorption, was shown to be able to reproduce experimental data points with accuracy.

Adsorption↗