Nucleotide sequence of the classical lacZ deletion delta M15.
Explore the source record for details and available documents.
Amino Acid Sequence↗
Biomedical subjects
P Prentki
Publications and source records attributed to P Prentki.
Use of gel retardation to analyze protein-nucleic acid interactions.
Protein-nucleic acid interactions are crucial in the regulation of many fundamental cellular processes. The nature of these interactions is susceptible to analysis by a variety of methods, but the combination of high analytical power and technical simplicity offered by the gel retardation (band shift) technique has made this perhaps the most widely used such method over the last decade. This procedure is based on the observation that the formation of protein-nucleic complexes generally reduces the electrophoretic mobility of the nucleic acid component in the gel matrix. This review attempts to give a simplified account of the physical basis of the behavior of protein-nucleic acid complexes in gels and an overview of many of the applications in which the technique has proved especially useful. The factors which contribute most to the resolution of the complex from the naked nucleic acid are the gel pore size, the relative mass of protein compared with nucleic acid, and changes in nucleic acid conformation (bending) induced by binding. The consequences of induced bending on the mobility of double-strand DNA fragments are similar to those arising from sequence-directed bends, and the latter can be used to help characterize the angle and direction of protein-induced bends. Whether a complex formed in solution is actually detected as a retarded band on a gel depends not only on resolution but also on complex stability within the gel. This is strongly influenced by the composition and, particularly, the ionic strength of the gel buffer. We discuss the applications of the technique to analyzing complex formation and stability, including characterizing cooperative binding, defining binding sites on nucleic acids, analyzing DNA conformation in complexes, assessing binding to supercoiled DNA, defining protein complexes by using cell extracts, and analyzing biological processes such as transcription and splicing.
Base Sequence↗
Plasmid vectors for selecting IS1-promoted deletions in cloned DNA: sequence analysis of the omega interposon.
We have constructed two plasmid vectors which allow selection for in vivo deletions within cloned DNA fragments. The plasmids are derivatives of pBR322 which carry the Escherichia coli rpsL (strA) gene, known to confer a dominant streptomycin (Sm)-sensitivity phenotype to the host cell, and a copy of the IS1 transposable element. Sm-resistant strains that harbor these plasmids display sensitivity to Sm. Spontaneous IS1-promoted deletions across the rpsL gene can be isolated simply by selection for Sm resistance. Hence, nested sets of deletions of a cloned DNA can be obtained and sequenced with an IS1-specific primer. Using this approach, we have determined the complete nucleotide sequence of the omega interposon [Prentki and Krisch, Gene 29 (1984) 303-313].
Amino Acid Sequence↗
Identification of protein binding sites in genomic DNA by two-dimensional gel electrophoresis.
We describe a simple two-dimensional electrophoresis procedure to identify the recognition sites of DNA-binding proteins within large DNA molecules. Using this approach, we have mapped E. coli IHF (Integration Host Factor) binding sites within phage Lambda (48 kb) and phage Mu (39 kb) DNA. We are also able to visualize IHF binding sites in E. coli chromosomal DNA (4,700 kb). We present an extension of this technique using direct amplification by PCR of the isolated restriction fragments, which should permit the cloning of a collection of recognition sequences for DNA binding proteins in complex genomes.
Bacterial Proteins↗
Incompatibility between pSC101 and lambda dv replicons.
Escherichia coli cells are unable to co-maintain a lambda dv and a minimal pSC101 replicon. Selection for both plasmids results in a much reduced growth rate of the cells, whereas selection for one plasmid results in a rapid loss of the other. A chromosomal mutant has been isolated, which restores the normal growth rate of cells harbouring both plasmids, but does not alleviate the incompatibility. The nature of this new case of incompatibility is discussed.
Bacteriophage lambda↗
Functional organization of the ends of IS1: specific binding site for an IS 1-encoded protein.
The IS 1-encoded protein InsA binds specifically to both ends of IS1, and acts as a repressor of IS1 gene expression and may be a direct inhibitor of the transposition process. We show here, using DNasel 'foot-printing' and gel retardation, that the InsA binding sites are located within the 24/25 bp minimal active ends of IS1 and that InsA induces DNA bending upon binding. Conformational modification of the ends of IS1 as a result of binding of the host protein integration host factor (IHF) to its site within the minimal ends has been previously observed. Using a collection of synthetic mutant ends we have mapped some of the nucleotide sequence requirements for InsA binding and for transposition activity. We show that sequences necessary for InsA binding are also essential for transposition activity. We demonstrate that InsA and IHF binding sites overlap since some sequence determinants are shared by both InsA and IHF. The data suggest that these ends contain two functional domains: one for binding of InsA and IHF, and the other for transposition activity. A third region, when present, may enhance transposition activity with an intact right end. This 'architecture' of the ends of IS1 is remarkably similar to that of IS elements IS10, IS50 and IS903.
Bacterial Proteins↗
Omegon-Km: a transposable element designed for in vivo insertional mutagenesis and cloning of genes in gram-negative bacteria.
To combine the features of the omega interposons with the advantages of in vivo transposition mutagenesis, we have constructed an artificial transposon, called Omegon-Km. The Omegon-Km transposon is carried on the plasmid pJFF350 which can be conjugally mobilized into a broad range of Gram-negative bacteria. Omegon-Km is flanked, in inverted orientation, by synthetic 28-bp repeats derived from the ends of IS1. In addition, each end of Omegon-Km has the very efficient transcription and translation terminators of the omega interposon. Internally, Omegon-Km carries the selectable kanamycin (Km)-neomycin resistance gene (alph A) which is expressed well in many Gram-negative bacteria. The IS1 transposition functions are located on the donor plasmid but external to Omegon-Km. Thus, insertions of Omegon-Km are very stable because they lack the capacity for further transposition. Omegon-Km mutagenesis is performed by conjugal transfer of pJFF350 from Escherichia coli into any Gram-negative recipient strain in which this plasmid is unable to replicate. Those cells which have had a transposition event are selected by their resistance to Km. Very high frequencies of Omegon-Km transposition were observed in Pseudomonas putida. Preliminary experiments with other Gram-negative soil and water bacteria (Rhizobium leguminosarum, Paracoccus denitrificans) yielded mutants at reasonable levels. The presence of an E. coli-specific origin of replication (ori) within Omegon-Km allows the rapid and easy cloning, in E. coli, of the nucleotide sequences flanking the site of the transposition event.
Blotting, Southern↗
Processing of unstable bacteriophage T4 gene 32 mRNAs into a stable species requires Escherichia coli ribonuclease E.
Gene 32 from bacteriophage T4 is transcribed as precursor transcripts which are processed to a stable product. This processing of the gene 32 mRNA was observed in RNase III or P-deficient strains of Escherichia coli. However, after infection of an RNase E-deficient strain, the amount of processed transcript was significantly reduced while the levels of the precursor transcripts remained high. RNase E therefore appears to have an essential role in the processing of the gene 32 mRNA. We have mapped the exact 5' end of the processed transcript by primer extension. The cleavage occurs near a stem-loop structure at a site which shows some similarity to other known RNase E cleavage sites. The effects of the processing on the differential stability of the upstream and downstream sequences, and on gene expression, are discussed.
Autoradiography↗
Mutational analysis of the open reading frames in the transposable element IS1.
IS1 is one of the smallest transposable elements found in bacteria (768 bp). It contains eight overlapping open-reading-frames (ORFs) greater than 50 codons, designated insA to insG and insB'. To determine which of the ORFs actually code for proteins involved in transposition, we have introduced amber codons into each ORF by site-directed mutagenesis which make neutral changes in the overlapping ORFs. Each mutant IS1 was then tested for its ability to mediate cointegrate formation in Su+ and Su- backgrounds. The mutant elements were also tested for trans-complementation in an IS1-free Salmonella background. Our results show that the products of the insA and insB genes are the only ones essential for cointegrate formation. We suggest that other ORFs may, however, encode accessory proteins.
Amino Acid Sequence↗
Plasmid permutation vectors to monitor DNA bending.
Explore the source record for details and available documents.
Cloning, Molecular↗
Escherichia coli integration host factor binds specifically to the ends of the insertion sequence IS1 and to its major insertion hot-spot in pBR322.
We report here that the ends of IS1 are bound and protected in vitro by the heterodimeric protein integration host factor (IHF). Under identical conditions, RNA polymerase binds to one of these ends (IRL) and protects a region that includes the sequences protected by IHF. Other potential sites within IS1, identified by their homology to the apparent consensus sequence, are not protected. Footprinting analysis of deletion derivatives of the ends demonstrates a correspondence between the ability of the end sequence to bind IHF and its ability to function as an end in transposition. Nonetheless, some transposition occurs in IHF- cells, indicating that IHF is not an essential component of the transposition apparatus. IHF also binds and protects four closely spaced regions within the major hot-spot for insertion of IS1 in the plasmid pBR322. This striking correlation of hot-spot and IHF-binding sites suggests a possible role for IHF in IS1 insertion specificity.
Bacterial Proteins↗
Sense and antisense transcription of bacteriophage T4 gene 32. Processing and stability of the mRNAs.
Analysis of bacteriophage T4 gene 32 transcription has revealed a multiplicity of mRNAs. In plasmids, gene 32 is expressed primarily from a strong promoter that is shut off after phage infection. In a wild-type infection, gene 32 is initially transcribed from prereplicative polycistronic and monocistronic promoters; subsequently, a monocistronic late mRNA predominates. This transcript, as well as a post-transcriptionally processed product of the earlier mRNA, can be stable. The eventual degradation of the stable mRNAs is temporally regulated by the phage. Finally, the transcription termination region of gene 32 can function as an antisense promoter both in vitro and in vivo.
Base Sequence↗
Escherichia coli integration host factor bends the DNA at the ends of IS1 and in an insertion hotspot with multiple IHF binding sites.
The integration host factor of Escherichia coli (IHF) is a small, histone-like protein which participates in the integration of bacteriophage lambda into the E. coli chromosome and in a number of regulatory processes. Our recent footprinting analysis has shown that IHF binds specifically to the ends of the transposable element IS1, as well as to several sites within a short segment of the plasmid pBR322. We have extended our studies of the binding of the IHF molecule to these sites in vitro using a gel retardation assay. We report here that IHF bends the DNA upon binding, as judged from the strong cyclic dependence of the protein-induced mobility shift on the position of the binding site. Using cloned, synthetic ends of IS1 as substrates, we have found that some mutations within the conserved bases of the IHF consensus binding sequence abolish binding, and that alterations of the flanking sequences can greatly reduce IHF binding. The presence of multiple IHF sites on a single DNA fragment increases binding very little, indicating that IHF does not bind cooperatively in this complex. We discuss the possibility that DNA bending is related to the role IHF plays in forming and stabilizing nucleoprotein complexes, and suggest that bending at the IHF sites may be important to its diverse effects in the cell.
Bacterial Proteins↗
Expression of proteins essential for IS1 transposition: specific binding of InsA to the ends of IS1.
The insertion sequence IS1 displays a complex array of open reading frames (ORF). In an attempt to identify those which encode polypeptide products, we have systematically placed each ORF under the control of the P1 promoter of phage lambda. In the expression system we used, only the product of the insA gene was present in high enough amounts to be detected by polyacrylamide gel electrophoresis. The production of InsA was further increased in a first codon hook-up to phage T7 transcriptional and translational initiation signals. Cell extracts from InsA overproducers display a DNA binding activity specific for the ends of IS1. This activity was identified as the InsA protein itself.
Amino Acid Sequence↗
Artificial transposable elements in the study of the ends of IS1.
We have constructed artificial IS1-based transposons by attaching synthetic oligodeoxynucleotides, corresponding to the sequence of the ends of IS1, to a selectable DNA segment ['omega' fragment; Prentki and Krisch, Gene 29 (1984) 303-313]. These transposons were used to examine the sequence requirements at the ends for IS1 transposition. We show here that a 24- to 28-bp sequence from the left or right ends of IS1 is capable of transposition when present at both ends of the omega fragment in the correct orientation. Transposition activity requires the presence of an intact IS1 in cis on the same plasmid molecule. In trans, however, neither resident genomic copies of IS1, nor copies carried by a compatible, high-copy-number plasmid present in the same cell, complement the artificial transposons efficiently. Transposition frequencies in the presence of a cis-complementing IS1 are, however, similar to those of the naturally occurring IS1-based transposon, Tn9. In addition, transposition results in a 9-bp duplication in the target DNA molecule as is usually the case for insertion of the intact IS1. Using this system, we have obtained evidence indicating that the activity of a synthetic IS1 end is not determined exclusively by its sequence, but can be strongly enhanced by a second, wild-type end used in the transposition event. The data also show that single base pair mutations can exhibit a cumulative effect in reducing transposition activity.
Base Sequence↗
Functional promoters created by the insertion of transposable element IS1.
We have isolated several insertions of the transposable element IS1 into the proximal promoter (P3) of the beta-lactamase gene of plasmid pBR322, which do not abolish resistance to ampicillin. Using a transcription termination module (omega), we have shown that the gene can be expressed from hybrid promoters, created by the insertion of IS1. The terminal inverted repeats of IS1 carry sequences partially homologous to the "-35" consensus region. Splicing either of these sequences to the existing "-10" region of the beta-lactamase promoter by transposition of IS1 at the proper distance results in the formation of an active hybrid promoter. This interpretation was confirmed by transcription studies in vitro. Gene expression from the hybrid promoters was found to be less efficient than from P3. However, the orientation of IS1 that contributes a "-35" with the greater homology to the known "-35" consensus sequence is significantly more efficient than the other. In addition, we were able to assign a strong determinant of IS1 polarity to a 254 base-pair internal segment of IS1. An examination of the ends of many insertion sequences leads us to expect that the phenomenon described here may occur with several of these transposable elements, and may have an unexpected evolutionary significance.
Base Sequence↗
Specificity of insertion of IS1.
A systematic study of the specificity of insertion of the transposable element IS1 into small defined-sequence plasmids (pBR322 and derivatives) was conducted to determine the features of the DNA sequence that influence target site selection. We have physically mapped several collections of independent insertions of IS1 into these plasmids and have determined: (1) that about 80% of all insertions occur in the DNA segment (about 200 base-pairs) between the unique EcoRI site of pBR322 and the beginning of the beta-lactamase gene, one of the two regions of high A + T density in this plasmid; (2) that there is a strong orientation effect in this region (almost all IS1 insertions are in one orientation) that depends on both the pBR322 sequence and the environment of the transposon in the donor molecule; and (3) that the orientation effect does not depend on the strong transcription that is directed through this region in pBR322. Furthermore, we have found that insertion of a poly(dA X dT) segment into pBR322 creates an artificial hotspot for IS1 insertion, even though it is not as attractive for insertion as the above-mentioned major hotspot. Our observations suggest that an interplay between several properties of the target sequences and the sequence environment of the donor transposon is responsible for the observed specificity of position and orientation. One of the possibilities discussed here is that preferred "entry-sites", or "signal" sequences, for the transposition complex play a major role in determining the positions and orientations of IS1 insertions.
Ampicillin↗
The stability of bacteriophage T4 gene 32 mRNA: a 5' leader sequence that can stabilize mRNA transcripts.
In T4-infected cells, the gene 32 monocistronic mRNA is very stable. To study the molecular basis for this stability, we have constructed chimeric plasmids containing the monocistronic promoter and the gene 32 translation initiation sequence fused to either most of the E. coli lac operon or only a segment of the lacZ gene, followed by the gene 32 transcription terminator. The resulting hybrid transcripts are unstable in uninfected cells. In phage-infected cells, however, the hybrid mRNAs are at least as stable as gene 32 mRNA itself. Analysis of other plasmid constructs indicates that the sequences on the gene 32 mRNA from its 5' end to slightly beyond the initiation codon suffice to stabilize these hybrids. Studies with a series of deletions of the gene 32 leader sequence suggest that an RNA sequence near the gene 32 initiation codon is involved. Various models to explain this mRNA stabilization are discussed.
DNA Helicases↗