Biomedical subjects

P T Vallano

Publications and source records attributed to P T Vallano.

7 recordsLinked to original sources

PubMed2005

Determination of an investigational HIV integrase inhibitor in human plasma using high performance liquid chromatography with tandem mass spectrometric detection.

An HPLC-MS/MS assay for the determination of an HIV integrase inhibitor, 5-(1,1-dioxido-1,2-thiazinan-2-yl)-N-(4-fluorobenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamide (I) in human plasma has been developed and validated. Compound I and a stable isotope labeled internal standard (II) were isolated from 0.5 mL plasma samples by solid phase extraction using an Ansys SPEC C-8 96-well plate. Extracts were separated on a Hypersil BDS C-18 HPLC column (3.0 mmx50 mm, 3 microm) with a mobile phase consisting of 25 mM ammonium formate pH 3.0:acetonitrile (60:40) vol%/vol% pumped at 0.5 mL/min. A Sciex API 365 mass spectrometer equipped with an atmospheric pressure chemical ionization source was operated in selected reaction monitoring (SRM) mode with the precursor-to-product ion transitions m/z 431-->109 (I) and m/z 437-->115 (II) used for quantitation. The assay was validated over the concentration range of 10-5000 ng/mL and was found to have acceptable accuracy, precision, linearity, and selectivity. The mean extraction recovery from spiked plasma samples was 69%. The intra-day accuracy of the assay was within 4% of nominal and intra-day precision was better than 4% C.V. Following a 200 mg dose of the compound administered to human subjects, concentrations of I ranged from 21.1 to 1500 ng/mL in plasma samples collected up to 12 h after dosing. Inter-day accuracy and precision results for quality control samples run over a 3-month period alongside clinical samples showed mean accuracies of within 6% of nominal and precision better than 3.5% C.V.

Chromatography, High Pressure Liquid↗

PubMed2005

Elimination of autosampler carryover in a bioanalytical HPLC-MS/MS method: a case study.

A case study in identifying and eliminating the source of autosampler carryover in a bioanalytical HPLC-MS/MS assay is described. Through a series of systematic experiments, the carryover was traced to the injection valve and was eliminated by switching from a partial loop to a full loop injection, which provided more effective flushing of the sample flow path. The susceptibility of the HPLC system to carryover was demonstrated to depend on the absolute sensitivity of the detection method and the mass of analyte injected at the assay lower limit of quantitation (LLOQ).

Chemistry, Pharmaceutical↗

PubMed2003

Determination of risedronate in human urine by column-switching ion-pair high-performance liquid chromatography with ultraviolet detection.

An HPLC assay for the determination of risedronate in human urine was developed and validated. Risedronate and the internal standard were isolated from 5-ml urine samples in a two-part procedure. First, the analytes were precipitated from urine along with endogenous phosphates as calcium salts by the addition of CaCl(2) at alkaline pH. The precipitate was then dissolved in 0.05 M ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid and subjected to ion-pair solid-phase extraction using a Waters HLB cartridge (1 ml, 30 mg) with 1-octyltriethylammonium phosphate as the ion-pair reagent. Following extraction, the analytes were initially separated from the majority of co-extracted endogenous components on a Waters X-Terra RP18 (4.6 x 50 mm, 3.5 microm) column. The effluent from the X-Terra was "heart-cut" onto a Phenomenex Synergi Polar RP (4.6 x 150 mm, 4 microm) column for final separation. UV detection (lambda=262 nm) was used to quantitate risedronate in the concentration range of 7.5-250 ng/ml. Mean recovery was 83.3% for risedronate and 86.5% for the internal standard. The intra-day precision of the assay, as assessed by replicate (n=5) standard curves, was better than 6% RSD for all points on the standard curve. Within-day accuracy for the standards ranged from 96.3 to 106.1% of nominal. Inter-day precision for quality controls assayed over a 3-week period was better than 5%, while inter-day accuracy was within 90% of nominal. The assay was employed to analyze samples collected during a clinical pharmacokinetics study.

Chromatography, High Pressure Liquid↗

PubMed2002

Monolithic silica liquid chromatography columns for the determination of cyclooxygenase II inhibitors in human plasma.

Methods employing monolithic HPLC columns for the determination of the cyclooxygenase II inhibitors rofecoxib (I) and 3-isopropoxy-4-(4-methanesulfonylphenyl)-5,5'-dimethyl-5H-furan-2-one (DFP, III) in human plasma are described. Each analyte, together with an internal standard was extracted from the plasma matrix using solid-phase extraction in the 96-well format. The analytes were chromatographed on a Chromolith Speed Rod monolithic HPLC column (4.6 x 50 mm). Analyte detection for rofecoxib was via fluorescence following post-column photochemical derivatization. Detection for III was based on the native fluorescence of the compound. The precision, accuracy, and linearity of the methods were found to be comparable to those obtained using methods employing conventional packed HPLC columns. Use of the monolithic column permitted mobile phase flow-rates of up to 6.5 ml/min to be employed in the assays. The use of elevated flow-rates enabled the per sample analysis time to be reduced by up to a factor of 5 compared with assays based on packed HPLC columns. The results of experiments aimed at evaluating the ruggedness and reproducibility of monolithic columns employed in bioanalytical methods are presented.

Chromatography, High Pressure Liquid↗

PubMed2001

Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents. II. Covalent imprinted polymers.

This study concentrates on the production of covalent molecular imprint polymers (MIPs) as highly selective sorbents for nortriptyline (NOR), a representative tricyclic antidepressant (TCA). The functionalized template contains a polymerizable 4-vinylphenyl carbamate moiety used to bind the template molecule to the polymer matrix. Polymerization with a cross-linker followed by hydrolytic cleavage of the labile carbamate functionality leaves an MIP with selective binding sites capable of binding template through hydrogen bonding interactions. Demonstrated chromatographically through a "selection index", these MIPs showed high selectivity for the template molecule (NOR) among a library of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound. A direct comparison between covalent and non-covalent molecular imprinting strategies reveals a great deal of improvement in the peak shape of the retained compound resulting from covalent imprinting (evidenced by peak asymmetry factors A.).

Antidepressive Agents, Tricyclic↗

PubMed2000

Affinity screening by packed capillary high-performance liquid chromatography using molecular imprinted sorbents. I. Demonstration of feasibility.

Molecular imprint polymers (MIPs) are synthetic polymers capable of selectively binding a template molecule. In this work, the potential utility of MIP-based chromatographic sorbents for affinity screening of structurally similar compounds was investigated as alternatives to in vitro bioassays and biological targets bound to chromatographic supports. A group of structurally similar tricyclic antidepressant drugs and related compounds were used to simulate a combinatorial library. One of the antidepressants, nortriptyline (NOR), was selected as the template species. Using capillary HPLC columns packed with NOR-imprinted MIP particles, the simulated library was screened and the degree of selective interaction of each compound was determined. This correlated with each compound's affinity for the NOR binding site in the polymer. The results of the study revealed that library species which possess the major structural features of the template, specifically the ring structure and pendant secondary amine, were best "recognized" by the MIP, while the most structurally dissimilar compounds exhibited the least selective interaction. An investigation of the retention mechanism on these MIPs provided evidence that hydrogen bonding between the pendant amine group on the antidepressants and a methacrylic acid moiety on the polymer surface was critical in the molecular recognition process.

Antidepressive Agents, Tricyclic↗

PubMed2000

Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents.

Molecular imprint polymers (MIPs) are synthesized in the presence of a template, or 'imprint' molecule which results in the formation of specific recognition cavities complementary to the template in shape and chemical functionality. The resultant MIP then acts as a selective binding medium for the template molecule. The utility of MIPs lies in the selectivity of the rebinding process, which is based on molecular recognition. In many cases, the selectivity achieved with MIPs toward a particular molecule is comparable to that observed with antibodies. This has led to the application of MIPs to several areas of analytical chemistry including immunoassays, sensors and separations media. One of the most successful application areas of MIPs has been as chromatographic sorbents, where they have been utilized predominately in chiral separations. The use of MIP sorbents in CEC is attractive in that it combines the selectivity of a molecular recognition process with the enhanced flow dynamics of CEC, which can result in higher efficiency and shorter analysis times. This paper will review the use of molecular imprinted stationary phases in CEC. Following a brief introduction to molecular imprinting, various methodologies for preparation of MIP-CEC capillaries in addition to applications of the technique will be discussed.

Antidepressive Agents, Tricyclic↗