PubMed Health⌕ Search

Biomedical subjects

P W Atkinson

Publications and source records attributed to P W Atkinson.

At least 19 recordsLinked to original sources

Nuclear localization of the Hermes transposase depends on basic amino acid residues at the N-terminus of the protein.

For the Hermes transposable element to be mobilized in its eukaryotic host, the transposase, encoded by the element, must make contact with its DNA. After synthesis in the cytoplasm, the transposase has to be actively imported into the nucleus because its size of 70.1 kDa prevents passive diffusion through the nuclear pore. Studies in vitro using transient expression of a Hermes-EGFP fusion protein in Drosophila melanogaster Schneider 2 cells showed the transposase was located predominantly in the nucleus. In silico sequence analysis, however, did not reveal any nuclear localization signal (NLS). To identify the sequence(s) responsible for localization of Hermes transposase in the nucleus, truncated or mutated forms of the transposase were examined for their influence on sub-cellular localization of marker proteins fused to the transposase. Using the same expression system and a GFP-GUS fusion double marker, residues 1-110 were recognized as sufficient, and residues 1-32 as necessary, for nuclear localization. Amino acid K25 greatly facilitated nuclear localization, indicating that at least this basic amino acid plays a significant role in this process. This sequence overlaps the proposed DNA binding region of the Hermes transposase and is not necessarily conserved in all members of the hAT transposable element family.

Amino Acid Sequence↗

Patterns of Hermes transposition in Drosophila melanogaster.

Transposable elements are being developed as tools for genomics and for the manipulation of insect genotypes for the purposes of biological control. An understanding of their transposition behavior will facilitate the use of these elements. The behavior of an autonomous Hermes transposable element from Musca domestica in the soma and germ-line of Drosophila melanogaster was investigated using the method of transposon display. In the germ-line, Hermes transposed at a rate of approximately 0.03 jumps per element per generation. Within the soma Hermes exhibited markedly non-random patterns of integration. Certain regions of the genome were distinctly preferred over others as integration targets, while other regions were underrepresented among the integration sites used. One particular site accounted for 4.4% of the transpositions recovered in this experiment, all of which were located within a 2.5-kb region of the actin5C promoter. This region was also present within the Hermes element itself, suggesting that this clustering is an example of transposable element "homing". Clusters of integration sites were also observed near the original donor sites; these represent examples of local hopping. The information content (sequence specificity) of the 8-bp target site was low, and the consensus target site resembles that determined from plasmid-based integration assays.

Animals↗

The C-terminus of the Hermes transposase contains a protein multimerization domain.

Transposase activity that mediates the mobility of class II transposable elements, is most commonly initiated by the assembly of higher order synaptic complexes, called transpososomes. The formation of these complexes, that contain the transposable element's DNA as well as two or more molecules of the transposase, is dependent on interactions between transposase molecules. Using the yeast Two-Hybrid system, we were able to identify three regions mediating multimerization of the Hermes transposase, an element used for germline transformation of insects belonging to the hAT family of transposable elements. One region facilitating protein binding of Hermes transposase molecules was found within the first 252 amino acids of the transposase. The second region was located at the C-terminus of the transposase, and was found to be specific for Hermes transposase multimerization. Amino acids 551-569 were not only required for multimerization but were also necessary for transposition of the element. The third region was located between amino acids 253 and 380 and was found to eliminate the non-specific protein binding ability of the N-terminal protein interaction region but was required for the specific protein binding ability of the C-terminal region of the transposase. Five point mutations affecting the structural integrity of the C-terminal multimerization region abolished or significantly reduced transpositional activity. The same region had been previously identified to mediate dimerization in Activator (Ac), another hAT element, indicating that hAT transposase multimerization is likely to be a prerequisite for mobility of their elements.

Amino Acid Sequence↗

Does the proposed DSE motif form the active center in the Hermes transposase?

Donor cleavage and strand transfer are two functions performed by transposases during transposition of class II transposable elements. Within transposable elements, the only active center described, to date, facilitating both functions, is the so-called DDE motif. A second motif, R-K-H/K-R-H/W-Y, is found in the site-specific recombinases of the tyrosine recombinase family. While present in many bacterial insertion sequences as well as in the eukaryotic family of mariner/Tc1 elements, the DDE motif was considered absent in other classes of eukaryotic class II elements such as P, and hAT and piggyBac. Based on sequence alignments of a hobo-like element from the nematode Caenorhabditis elegans, to a variety of other hAT transposases and several members of the mariner/Tc1 group, Bigot et al. [Gene 174 (1996) 265] proposed the presence of a DSE motif in hAT transposases. In the present study we tested if each of these three residues is required for transposition of the Hermes element, a member of the hAT family commonly used for insect transformation. While D402N and E572Q mutations lead to knock-out of Hermes function, mutations S535A and S535D did not affect transposition frequency or the choice of integration sites. These data give the first experimental support that D402 and E572 are indeed required for transposition of Hermes. Furthermore, this study indicates that the active center of the Hermes transposase differs from the proposed DSE motif. It remains to be shown if other residues also form the active site of this transposase.

Amino Acid Motifs↗

The buffer effect and large-scale population regulation in migratory birds.

Buffer effects occur when sites vary in quality and fluctuations in population size are mirrored by large changes in animal numbers in poor-quality sites but only small changes in good-quality sites. Hence, the poor sites 'buffer' the good sites, a mechanism that can potentially drive population regulation if there are demographic costs of inhabiting poor sites. Here we show that for a migratory bird this process can apply on a country-wide scale with consequences for both survival and timing of arrival on the breeding grounds (an indicator of reproductive success). The Icelandic population of the black-tailed godwit, Limosa limosa islandica, wintering in Britain has increased fourfold since the 1970s (ref. 5) but rates of change within individual estuaries have varied from zero to sixfold increases. In accordance with the buffer effect, rates of increase are greater on estuaries with low initial numbers, and godwits on these sites have lower prey-intake rates, lower survival rates and arrive later in Iceland than godwits on sites with stable populations. The buffer effect can therefore be a major process influencing large-scale population regulation of migratory species.

Animals↗

Hermes-mediated germ-line transformation of the Mediterranean fruit fly Ceratitis capitata.

We report the use of the Hermes transposable element for germ-line transformation of the Mediterranean fruit fly, Ceratitis capitata. Hermes was able to genetically transform this insect at an estimated frequency between 0.6 and 1.1%, which is comparable to the transformation frequencies obtained for this species when using other transposable elements. Hermes integrates into the medfly genome by a cut-and-paste mechanism and the sequences integrated into the genome are delimited by the terminal nucleotides of the Hermes inverted terminal repeats. Integration resulted in the generation of 8 bp target site duplications, the sequences of which conformed to the target site duplications generated by hAT element transposition in insects. The Hermes element is one additional genetic tool that can be deployed in manipulating and characterizing the medfly genome.

Animals↗

Genetic transformation systems in insects.

The past 5 years have witnessed the emergence of techniques that permit the stable genetic transformation of a number of non-drosophilid insect species. These transposable-element-based strategies, together with virus-based techniques that allow the expression of genes to be quickly examined in insects, provide insect scientists with a first generation of genetic tools that can begin to be harnessed to further increase our understanding of gene function and regulation in insects. We review and compare the characteristics of these gene transfer systems and conclude that, although significant progress has been made, these systems still do not meet the requirements of robust genetic tools. We also review risk assessment issues arising from the generation and probable release of genetically engineered insects.

Animals↗

Stable, germ-line transformation of Culex quinquefasciatus (Diptera: Culicidae).

A Hermes-based transposable element transformation system incorporating an enhanced green fluorescent protein (EGFP) marker was used to produce two transgenic lines of Culex quinquefasciatus (Say). The transformation frequency was approximately 12% and transformation of Culex was shown to be dependent on the presence of Hermes transposase. Injected Culex embryos were treated with four different heat shock regimes, two of which produced transformed individuals. These individuals were mated with wild-type mosquitoes and produced offspring which expressed the dominant EGFP gene in Mendelian ratios predicted for the stable integration of a gene at a single locus. The two transformed lines displayed distinct patterns of phenotypic expression, the expression of which has remained stable after fifteen generations. In these transgenic lines both the Hermes element and flanking plasmid DNA integrated into the Culex genome, as has been previously seen in Hermes-mediated transgenic strains of Aedes aegypti (L.). The high frequency of Culex transformation together with the dependence on the presence of Hermes transposase suggests that, as for Ae. aegypti, this mode of transposition into the germ-line genome occurs by an alternate mechanisms to the cut and paste type of transposition seen for this element in other insect species and in the somatic nuclei of mosquitoes. This is the first report of the genetic transformation of a species in the genus Culex and demonstrates that this medically important mosquito species can now, along with several other Culicine and Anopheline mosquito species, be genetically manipulated.

Aedes↗

The resolution of Californian populations of Liriomyza huidobrensis and Liriomyza trifolii (Diptera: Agromyzidae) using PCR.

Liriomyza trifolii (Burgess) and Liriomyza huidobrensis (Blanchard) are important vegetable pests in California. Populations of each species differ in their impact in central and southern regions. This difference may be explained by geographical or host plant differences in each of the regions. We used random amplified polymorphic DNA polymerase chain reactions to assess genetic differences between two laboratory populations of each species collected from central and southern California. Individual L. trifolii from the two regions could be discriminated by the presence/absence of PCR products. No such qualitative differences were apparent in PCR products amplified from L. huidobrensis individuals, but the origins of individuals could be differentiated using a bootstrap analysis of marker frequencies. Marker primers were used to compare field and laboratory individuals. No evidence was found for the existence of further populations or of hybrid populations in central and southern California. The distribution of populations of L. huidobrensis was explained completely by geographical differences. As a consequence of the absence of leafminer infestations on the same host plant varieties in both regions, factors governing L. trifolii population distribution differences were less apparent. The presence of the same host plant varieties at both sites suggests that the two L. trifolii populations differ in host plant preference.

Animals↗

Green fluorescent protein as a genetic marker in transgenic Aedes aegypti.

We report here the use of the enhanced green fluorescent protein (EGFP) from the jellyfish, Aequorea victoria, as a genetic marker for the genetic transformation of mosquitoes. The EGFP gene, under the control of the actin5C promoter of Drosophila melanogaster was inserted into the Hermes transposable element. Preblastoderm embryos of a wild-type strain of the yellow fever mosquito, Aedes aegypti, were microinjected with this plasmid, together with a helper plasmid containing the Hermes transposase placed under the control of the D. melanogaster hsp70 promoter. Somatic EGFP expression was observed during early instars in approximately one-half of all G0 individuals. Two G1 individuals arising from a G0 female displayed high levels of EGFP gene expression during all stages of development. EGFP was transmitted in a Mendelian fashion to the G2 and G3 generations and molecular analysis confirmed the presence of the Hermes[actin5C:EGFP] gene in these insects. These results clearly demonstrate that EGFP can be used as an effective genetic marker in wild-type Ae. aegypti and most likely in other mosquito species as well.

Aedes↗

Transformation of Stomoxys calcitrans with a Hermes gene vector.

The ability of the Hermes transposable element to function as a germ line transformation vector was tested in the stable fly, Stomoxys calcitrans. Plasmid-based transposable element mobility assays indicated moderate mobility of Hermes in this species. Germline transformants were created using a Hermes element containing the enhanced green fluorescent protein (EGFP) under the regulatory control of the promoter from Actin5C gene of Drosophila melanogaster. Approximately 4% of the fifty-five adults that developed from the 1903 G(0) embryos injected with the vector produced transgenic progeny. In the four transgenic lines established, the EGFP expression pattern was distinctly nonuniform and levels of expression were low. Promoters other than the one from the Actin5C gene of D. melanogaster should be considered for widespread, constitutive expression. All transgenic lines contained multiple (2-4) integrated Hermes elements. Hermes integration events occurred through a canonical cut-and-paste mechanism.

Animals↗

Integration specificity of the hobo element of Drosophila melanogaster is dependent on sequences flanking the integration site.

We analyzed the integration specificity of the hobo transposable element of Drosophila melanogaster. Our results indicate that hobo is similar to other transposable elements in that it can integrate into a large number of sites, but that some sites are preferred over others, with a few sites acting as integration hot spots. A comparison of DNA sequences from 112 hobo integration sites identified a consensus sequence of NTNNNNAC, but this consensus was insufficient to account for the observed integration specificity. To begin to define the parameters affecting hobo integration preferences, we analyzed sequences flanking a donor hobo element, as well as sequences flanking a hobo integration hot spot for their relative influence on hobo integration specificity. We demonstrate experimentally that sequences flanking a hobo donor element do not influence subsequent integration site preference, whereas, sequences contained within 31 base pairs flanking an integration hot spot have a significant effect on the frequency of integration into that site. However, sequence analysis of the DNA flanking several hot spots failed to identify any common sequence motif shared by these sites. This lack of primary sequence information suggests that higher order DNA structural characteristics of the DNA and/or chromatin may influence integration site selection by the hobo element.

Animals↗

The Queensland fruit fly, Bactrocera tryoni, contains multiple members of the hAT family of transposable elements.

Members of the hAT transposable element family are mobile in non-host insect species and have been used as transformation vectors in some of these species. We report that the Queensland fruit fly, Bactrocera tryoni, contains at least two types of insect hAT elements called Homer and a Homer-like element (HLE). The Homer element is 3789 bp in size and contains 12-bp imperfect inverted terminal repeats. The Homer element contains a long open reading frame (ORF) that encodes a putative transposase. Three different copies of this long ORF were recovered from the B. tryoni genome and, upon transcription and translation in an in vitro system, all produced transposase. The HLE is an incomplete element since no 3' inverted terminal repeat (ITR) was found. Homer and the HLE are as related to one another as either is to the other insect hAT elements such as Hermes, hobo, hermit and hopper. The structure and distribution of these two Homer elements is described.

Amino Acid Sequence↗

Transposable element interactions in insects: crossmobilization of hobo and Hermes.

There are four non-drosophilid insect gene vector systems available that have been constructed from the short inverted repeat-type transposable elements Minos, piggyBac, mariner and Hermes. These elements (with the possible exception of piggyBac) are members of transposable element families that appear to be widespread in nature. Because these transposable element families are large it is possible that an insect species targeted for transformation will contain related transposable elements. The data presented here begin to address directly the question of interaction between diverged but related members of transposable element families. We tested the ability of the hAT elements hobo and Hermes to interact and cause crossmobilization. Using plasmid-based and chromosome-based element mobility assays we found that the terminal sequences of hobo and Hermes were almost equally good substrates for hobo transposase. However, this ability to crossmobilize was not reciprocal. Hermes transposase was only rarely able to cause the excision of hobo elements from plasmids and was never observed from germline chromosomes. These results have important implications for transgenic insect studies in the future.

Animals↗

Post pupariation cold storage of three species of flies: increasing chilling tolerance by acclimation and recurrent recovery periods.

Three species of flies were examined for chilling tolerance from the end of the pupariation to the onset of adult eclosion for the purpose of determining applicability for cold storage. For the housefly, Musca domestica (Diptera, Muscidae), survival to eclosion was affected by developmental stage/age, length of storage, and storage temperature. Houseflies that were closest to having experienced pupariation or the onset of eclosion were the least cold tolerant. For flies stored at 7 or 10 degrees C, age groups placed directly into storage at 36-72 and 36-48 h postpupariation, respectively, had significantly higher poststorage eclosion than younger or older age groups. Death was observed after only 2 or 3 days with the chilling intolerant groups while mid-aged groups survived 10-12 days under cold storage conditions. Damage could be reduced by giving the mid-aged groups chilled at 7 or 10 degrees C recurrent 2- or 3-h recovery periods every 4 days at 28 degrees C. Examination of O2 consumption throughout the housefly pupal and pharate adult stages showed that the most chilling tolerant groups also had the lowest metabolic activity. Combining a prestorage 17-h slow cooling acclimation interval with the recurrent recovery periods increased eclosion of adults 20% for the 12- to 24-h group after 21 days storage at 7 degrees C. Two blowfly species, Lucilia cuprina and Lucilia sericata (Diptera, Calliphoridae), survived 10 degrees C storage best when given a weekly 4-h recovery period. Survival at 90 days poststorage was nearly 50% for L. cuprina and 80% for L. sericata. Increasing survival under subambient temperatures for all three species appears to relate to whether there is a stage of development which allows cold-induced lowering of metabolism that results in a dormant status best characterized as hibernal quiescence. This study indicates that periodic warming during cold storage increases survival by allowing a chilling intolerant stage to develop to a more tolerant stage and/or by eliminating accumulated toxic metabolites.

Adaptation, Biological↗

Interplasmid transposition of the mariner transposable element in non-drosophilid insects.

Plasmid-based transposition assays were performed in developing embryos of the Australian sheep blowfly Lucilia cuprina and the Queensland fruit fly Bactrocera tryoni, using the mariner transposable element from Drosophila mauritiana. Transposition products were recovered that were identical in structure to those recovered from D. melanogaster. Only sequences delimited by the mariner terminal repeats were transposed and all insertions occurred at TA residues, and duplicated these. These are the hallmarks of mariner transpositions observed in the chromosomes of D. melanogaster and D. mauritiana, indicating that the plasmid-based assays are accurate indicators of mariner transposition activity. The recovery of precise transposition products from L. cuprina and B. tryoni demonstrates that mariner should be capable of producing germline transformants in these species. The results obtained from these assays suggests that they will be extremely useful in determining if mariner can transpose in other non-drosophilid insects and for investigating factors that might affect mariner transposition frequency.

Animals↗

The Hermes element from Musca domestica can transpose in four families of cyclorrhaphan flies.

Transgenic insect technology will provide opportunities to explore the basic biology of a broad range of insect species in ways that will prove insightful and important. It is also a technology that will provide opportunities to manipulate the genotypes of insects of practical significance to the health and welfare of humans. The Hermes transposable element from the housefly, Musca domestica, is a short inverted repeat-type element related to hobo from Drosophila melanogaster, Ac from Zea mays, and Tam3 from Antirrhinum majus. It has potential to become a versatile and efficient broad host-range insect transformation vector. The ability of Hermes to transpose when introduced into five species of diptera from four divergent families was tested using an in vivo, interplasmid transpositional recombination assay. Hermes was capable of transposing in all species tested, demonstrating that Hermes has a broad host-range. In addition, the rates of transposition were sufficiently high in all species tested to suggest that Hermes will be an efficient gene transfer vector in a wide range of insect species. The Hermes element also revealed a pattern of integration into the target substrate that permitted factors determining integration site selection to be identified. Primary nucleotide sequence of the integration site played a role as did proximity to preferred integration sites and the nucleosomal organization of the target.

Animals↗