PubMed Health⌕ Search

Biomedical subjects

Padmanava Pradhan

Publications and source records attributed to Padmanava Pradhan.

7 recordsLinked to original sources

Highly diastereoselective synthesis of nucleoside adducts from the carcinogenic benzo[a]pyrene diol epoxide and a computational analysis.

A diastereoselective synthesis of the nucleoside adducts corresponding to a cis ring-opening of the carcinogen (+/-)-7 beta, 8 alpha-dihydroxy-9 alpha,10 alpha-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (BaP DE-2) by 2'-deoxyadenosine and 2'-deoxyguanosine is described. The key intermediate (+/-)-10alpha-amino-7beta,8alpha,9alpha-trihydroxy-7,8,9,10-tetrahydrobenzo[a]pyrene was synthesized by a highly diastereoselective dihydroxylation wherein phenylboronic acid was a water surrogate. The resulting boronate ester was converted to a tetraol derivative in which two of the four hydroxyl groups (trans 7, 8) were protected as benzoate esters while the remaining two (cis 9, 10) were free. The cis glycol entity was then subjected to a reaction with 1-chlorocarbonyl-1-methylethylacetate to yield an intermediate chloro monoacetoxy dibenzoate. Displacement of the halide with azide, complete cleavage of the esters, and catalytic reduction of the azide yielded the requisite amino triol. Fluoride displacement from appropriately protected nucleoside derivatives, 6-fluoropurine 2'-deoxyribonucleoside and 2-fluoro-2'-deoxyinosine, by the amino triol then yielded diastereomeric pairs of diol epoxide-adducted 2'-deoxyadenosine (dA) and 2'-deoxyguanosine (dG) nucleosides. Small aliquots of these adducts were separated for characterization purposes. The present approach provides the first diastereoselective synthesis of the cis adducts of BaP DE-2 with 2'-deoxyguanosine as well as the first synthesis of both dA and dG adducts from a common intermediate. An informative analysis of the 1H NMR spectra of the cis adducts synthesized and comparisons to the trans adducts are reported. To gain insight into the diastereoselectivity in the key dihydroxylation step, a computational analysis, including molecular mechanics (MMFF94) and semiempirical AM1 geometry optimizations, yielded results that are in fairly good agreement with the experimental observations.

7,8-Dihydro-7,8-dihydroxybenzo(a)pyrene 9,10-oxide↗

Mild and room temperature C-C bond forming reactions of nucleoside C-6 arylsulfonates.

[reaction: see text] Palladium catalyzed cross coupling of nucleoside arylsulfonates and arylboronic acids has been accomplished under mild conditions and at room temperature. Among three structurally similar ligands that differ in their steric and electronic properties, one yielded an effective catalyst in conjunction with Pd(OAc)2. Of the nucleoside arylsulfonates evaluated, the O6-(2,4,6-trimethylphenyl)sulfonate proved optimal, but other alkyl and alkoxy derivatives were also reasonably reactive. On the other hand, a 2-nitrophenyl and a 2-thienyl derivative were ineffective substrates. PhMe and THP were suitable as solvents, yielding good results in several cases, although reactions of some arylboronic acids were faster in PhMe. In contrast, reactions of arylboronic acids bearing strongly electron-withdrawing groups proceeded more successfully in THP. Interplay between several factors that include substituents on the nucleoside arylsulfonate, ligand substituents, and solvent is responsible for successful cross coupling. Using 31P NMR, an initial investigation has been conducted to study the interaction of Pd(OAc)2 with the ligand. At a 1:1 stoichiometry of ligand and Pd(OAc)2, a predominant species, likely a cyclopalladation product, was obtained. At a 2:1 ratio of ligand and Pd(OAc)2, a different species bearing chemically distinct phosphine ligands was observed. Both complexes display catalytic activity, although the 2:1 species may be superior.

Arylsulfonates↗

Voltage gating and anions, especially phosphate: a model system.

The voltage sensor of voltage gated sodium and potassium channels consists of four sets of transmembrane segments, of which one, called S4, contains at least four arginines; these are presumed to each carry positive charges. The channel opening is usually attributed to the outward (i.e., toward the extracellular side of the membrane) motion of S4. The evidence for this motion is based on certain experiments that appear to show differential access to parts of S4 from the intracellular and extracellular sides of the membrane in the open and closed states. A newly available structure [S.B. Long, E.B. Campbell and R. MacKinnon, Crystal structure of a mammalian voltage-dependent Shaker family K(+) channel. Science 309 (2005) 897-903; S.B. Long, E.B. Campbell, R. MacKinnon, Voltage sensor of Kv1.2: structural basis of electromechanical coupling. Science 309 (2005) 903-908][1,2] has now been used to argue for a large scale motion, although, as a static structure, it is not conclusive. In this paper, we consider the effect of anions in the surrounding medium. Phosphate is present in the intracellular as well as the extracellular fluid, apparently at hundreds of micromolar concentration, or more. There is evidence in the literature suggesting that phosphate-arginine complexes are rather strong. In a recent calculation one of us [M.E. Green, A possible role for phosphate in complexing the arginines of S4 in voltage gated channels J. Theor. Biol. 233 (2005) 337-341][3] has shown that a model peptide with a 2:1 arg:phosphate complex should have a favorable geometry. Here, we present NMR evidence of the existence of phosphate complexes of a model peptide with two arginines separated by two hydrophobic residues, the same spacing as in S4 segments. The complexes (there are different complexes for HPO(4)(2-) and for H(2)PO(4)(-) [3]) form with concentrations of peptide in the range of hundreds of micromolar, making it significant in the biological context. NMR spectra provide changes in chemical shift as functions of both phosphate concentration and pH. The resulting curves show titration of the phosphate, with its standard pK. Possible implications for other anion-S4 interactions, including ion pairs rather than complexes, as with Cl(-), are also discussed.

Animals↗

Synthesis and reactions of 2-chloro- and 2-tosyloxy-2'-deoxyinosine derivatives.

Convenient syntheses of 2-chloro- and 2-tosyloxy-2'-deoxyinosine as their tert-butyldimethylsilyl ethers are described. Both compounds can be synthesized via a common route and rely on commercially available 2'-deoxyguanosine. The present method leading to the chloro nucleoside is operationally simpler compared to previously reported glycosylation techniques where isomeric products were obtained. Both electrophilic nucleosides can be used for the preparation of N-substituted 2'-deoxyguanosine analogues via displacement of the leaving groups, and a comparison of their reactivities shows the chloro analogue to be superior. Interestingly, a Pd catalyst-mediated, two-step, one-pot conversion of an allyl-protected chloro nucleoside intermediate to the final modified 2'-deoxyguanosine derivatives is also feasible. On the basis of these observations, initial assessments of Pd-catalyzed aryl amination as well as a C-C cross-coupling have also been performed with the chloro and tosyloxy nucleoside substrates. Results indicate a potentially high synthetic utility of 2-chloro-2'-deoxyinosine and in many instances this derivative can supplant the bromo and fluoro analogues that are more cumbersome to prepare or are not readily available.

Deoxyguanosine↗

NMR solution structure of an oxaliplatin 1,2-d(GG) intrastrand cross-link in a DNA dodecamer duplex.

We have determined, at high resolution, the NMR solution structure of an oxaliplatin-GG DNA dodecamer in the AGGC sequence context by 2D NMR studies. Homonuclear assignment strategies resulted in unambiguous assignment of 203 out of 249 protons, which corresponds to assignment of approximately 81% of the protons. Assignments of H5' and H5" protons were tentative due to resonance overlap. The structure of the oxaliplatin duplex was calculated using the program CNS with a simulated annealing protocol. A total of 510 experimental restraints were employed in the structure calculation. Of 20 calculated structures, the 15 with the lowest energy were accepted as a family. The RMSD of the 15 lowest energy structures was 0.68 A, indicating good structural convergence. The theoretical NOESY spectrum obtained by back-calculation from the final average structure showed excellent agreement with the experimental data, indicating that the final structure was in good agreement with the experimental NMR data. Significant conformational differences were observed between the oxaliplatin-GG 12-mer DNA we studied and all previous solution structures of cisplatin-GG DNA duplexes. For example, the oxaliplatin-GG adduct shows much less distortion at the AG base-pair step than the cisplatin-GG adducts. In addition, the oxaliplatin-GG structure also has a narrow minor groove and an overall axis bend of about 31 degrees, both of which are very different from the recent NMR structures for the cisplatin-GG adducts. These structural differences may explain some of the biological differences between oxaliplatin- and cisplatin-GG adducts.

Antineoplastic Agents↗

Mutagenesis of the Runt domain defines two energetic hot spots for heterodimerization with the core binding factor beta subunit.

Core-binding factors (CBFs) are a small family of heterodimeric transcription factors that play critical roles in several developmental pathways and in human disease. Mutations in CBF genes are found in leukemias, bone disorders, and gastric cancers. CBFs consist of a DNA-binding CBF alpha subunit (Runx1, Runx2, or Runx3) and a non-DNA-binding CBF beta subunit. CBF alpha binds DNA in a sequence-specific manner, whereas CBF beta enhances DNA binding by CBF alpha. Both DNA binding and heterodimerization with CBF beta are mediated by a single domain in the CBF alpha subunits known as the "Runt domain." We analyzed the energetic contribution of amino acids in the Runx1 Runt domain to heterodimerization with CBF beta. We identified two energetic "hot spots" that were also found in a similar analysis of CBF beta (Tang, Y.-Y., Shi, J., Zhang, L., Davis, A., Bravo, J., Warren, A. J., Speck, N. A., and Bushweller, J. H. (2000) J. Biol. Chem. 275, 39579-39588). The importance of the hot spot residues for Runx1 function was demonstrated in in vivo transient transfection assays. These data refine the structural analyses and further our understanding of the Runx1-CBF beta interface.

Alanine↗

MQ-hCN-based pulse sequences for the measurement of 13C1'-1H1', 13C1'-15N, 1H1'-15N, 13C1'-13C2', 1H1'-13C2',13C6/8-1H6/8, 13C6/8-15N, 1H6/8-15N, 13C6-13C5, 1H6-13C5 dipolar couplings in 13C, 15N-labeled DNA (and RNA).

A suite of multiple quantum (MQ) HCN-based pulse sequences has been developed for the purpose of collecting dipolar coupling data in labeled nucleic acids. All the pulse sequences are based on the robust MQ-HCN experiment which has been utilized for assignment purposes in labeled nucleic acids for a number of years and provides much-needed resolution for the dipolar coupling measurements. We have attempted to collect multiple couplings centered on the 13C1' and 13C6/8 positions. Six pulse sequences are described, one each for measurement of one-bond 13C1'-1H1' and 13C6/8-1H6/8 couplings, one for measurement of one-bond 13C1'-15N and two-bond 1H1'-15N couplings, one for measurement of one-bond 13C6/8-15N and two-bond 1H6/8-15N couplings, one for measurement of one-bond 13C1'- 13C2' and two-bond 1H1'-13C2' couplings, and one for measurement of one-bond 13C6-13C5 and two-bond 1H6-13C5 couplings in the bases of C and T. These sequences are demonstrated for a labeled 18 bp DNA duplex in a 47 kDa ternary complex of DNA, CBFbeta, and the CBFalpha Runt domain, thus clearly demonstrating the robustness of the pulse sequences even for a very large complex.

Animals↗