PubMed Health⌕ Search

Biomedical subjects

Pankaz K Sharma

Publications and source records attributed to Pankaz K Sharma.

14 recordsLinked to original sources
PubMed2006

Modeling electrostatic effects in proteins.

Electrostatic energies provide what is perhaps the most effective tool for structure-function correlation of biological molecules. This review considers the current state of simulations of electrostatic energies in macromolecules as well as the early developments of this field. We focus on the relationship between microscopic and macroscopic models, considering the convergence problems of the microscopic models and the fact that the dielectric 'constants' in semimacroscopic models depend on the definition and the specific treatment. The advances and the challenges in the field are illustrated considering a wide range of functional properties including pK(a)'s, redox potentials, ion and proton channels, enzyme catalysis, ligand binding and protein stability. We conclude by pointing out that, despite the current problems and the significant misunderstandings in the field, there is an overall progress that should lead eventually to quantitative descriptions of electrostatic effects in proteins and thus to quantitative descriptions of the function of proteins.

Models, Molecular↗
PubMed2006

Ferromagnetic bonding: high spin copper clusters (n+1)Cu(n); n = 2-14) devoid of electron pairs but possessing strong bonding.

Density functional theoretic studies are performed for the high-spin copper clusters (n)(+1)Cu(n) (n = 2-14), which are devoid of electron pairs shared between atoms, hence no-pair clusters (J. Phys. Chem. 1988, 92, 1352; Isr. J. Chem. 1993, 33, 455; J. Am. Chem. Soc. 1999, 121, 3165). Despite the lack of electron pairing, it is found that the bond dissociation energy per atom (BDE/n) is significant and converges (to within 1 kcal mol(-1)), around a cluster size (11)Cu(10), to a value of BDE/n = 19 kcal mol(-1). This is a very large bonding energy, much larger than has previously been obtained for no-pair clusters of lithium, BDE/n = 12 kcal mol(-1), or sodium clusters, BDE/n = 3 kcal mol(-1). This bonding, so-called ferromagnetic bonding (FM-bonding) is analyzed using a valence bond (VB) model (J. Phys. Chem. A 2002, 106, 4961; Phys. Chem. Chem. Phys. 2003, 5, 158). As such, FM-bonding in no-pair clusters is described as an ionic fluctuation, of the triplet pair, that spreads over all the close neighbors of a given atom in the clusters. Thus, if we refer to each triplet pair and its ionic fluctuations as a local FM-bond, we can regard the electronic structure of a given (n)(+1)M(n) cluster as a resonance hybrid of all the local FM-bonds between close neighbors. The model shows how a weak interaction in the diatomic triplet molecule can become a remarkably strong binding force that binds together mono-valent atoms without even a single electron pair. This is achieved because the growing number of VB structures exerts a cumulative effect of stabilization that is maximized when the cluster has a compact structure with an optimal coordination number for the atoms.

Benzoates↗
PubMed2005

What are the roles of substrate-assisted catalysis and proximity effects in peptide bond formation by the ribosome?

The action of the peptidyl transferase center of the large ribosomal unit presents a fundamental step in the evolution from the RNA world to the protein world. Thus, it is important to understand the origin of the catalytic power of this ancient enzyme. Earlier studies suggested that the ribosome catalyzes peptide bond formation by using one of its groups as a general base, while more recent works have proposed that the catalysis is due to proximity effects or to substrate-assisted catalysis. However, the actual nature of the catalytic mechanism remains controversial. This work addresses the origin of the catalytic power of the ribosome by using computer simulation approaches and comparing the energetics of the peptide bond formation in the ribosome and in water. It is found that a significant part of the observed activation entropy of the reference solution reaction is due to solvation entropy, and that the proximity effect is smaller than previously thought. It is also found that the 2'-OH of the A76 ribose, which is associated with a large rate acceleration in the ribosome reaction, does not catalyze peptide bond formation in water. Thus, the catalytic effect cannot be attributed to substrate-assisted catalysis but rather to the effect of the ribosome on the reacting system. Overall, our calculations indicate that the reduction of the activation free energy is mainly due to electrostatic effects. The nature of these effects and their relationship to catalytic factors in modern enzymes is analyzed and discussed.

Binding Sites↗
PubMed2005

Sulfoxidation mechanisms catalyzed by cytochrome P450 and horseradish peroxidase models: spin selection induced by the ligand.

The sulfoxidation of dimethyl sulfide (DMS), by two different heme-type enzyme models (without the protein), namely, horseradish peroxidase (HRP) and cytochrome P450 (P450), was studied using density functional theory. The models differ from each other by the axial ligand of the iron, which is imidazole in the case of HRP and thiolate in the case of P450. The computational results reveal a concerted oxygen atom transfer to sulfur, with spin-state selection dependent upon the identity of the proximal ligand. In the case of thiolate, the mechanism prefers the high-spin quartet pathway; whereas in the case of imidazole, the mechanism involves two-state reactivity (TSR), with competing quartet and doublet spin states. Furthermore, with thiolate the high-spin transition state, (4)TS(P450), has an upright conformation with a large Fe-O-S(DMS) angle of 147 degrees , whereas the low-spin species, (2)TS(P450), has a small angle and its Fe-O moiety makes an O-N(Por) bond with one of the nitrogen atoms of the porphine macrocycle. By contrast, when the proximal ligand is imidazole, both transition states possess a bent Fe-O bond and an O-N(Por) bond. These spin-state selection patterns obey simple orbital-selection rules, which are manifestations of the electronic nature of the ligand, i.e., the electron-releasing effect of the thiolate vis-a-vis the electron-withdrawal effect of imidazole. Other possible reactivity expressions of the spin-selection patterns are discussed [Dowers, T. S., Rock, D. A., Rock, D. A., Jones, J. P. (2004) J. Am. Chem. Soc. 126, 8868-8869]. Theory shows that intrinsically, HRP should be as reactive as P450 toward sulfoxidation.

Armoracia↗
PubMed2005

Simulating redox coupled proton transfer in cytochrome c oxidase: looking for the proton bottleneck.

Gaining a detailed understanding of the molecular nature of the redox coupled proton transfer in cytochrome c oxidase (COX) is one of the challenges of modern biophysics. The present work addresses this by integrating approaches for simulations of proton transport (PTR) and electron transfer (ET). The resulting method converts the electrostatic energies of different charge configurations and reorganization energies to free-energy profiles for different PTR and ET pathways. This approach provides for the first time a tool to study the actual activation barriers and kinetics of different feasible PTR processes in the cycle of COX. Using this tool, we explore the PTR through the bottleneck water molecules. It is found that a stepwise PTR along this commonly assumed path leads to far too high barriers and is, thus, inconsistent with the observed kinetics. Furthermore, the simulated free-energy profile does not provide a simple gating mechanism. Fortunately, we obtain reasonable kinetics when we consider a PTR that involves a concerted transfer of protons to and from E286. Finally, semi-qualitative considerations of the forward and backward barriers point toward open questions about the actual gating process and offer a feasible pumping mechanism. Although further studies are clearly needed, we believe that our approach offers a general and effective tool for correlating the structure of COX with its function.

Electron Transport Complex IV↗
PubMed2005

The intrinsic axial ligand effect on propene oxidation by horseradish peroxidase versus cytochrome P450 enzymes.

The axial ligand effect on reactivity of heme enzymes is explored by means of density functional theoretical calculations of the oxidation reactions of propene by a model compound I species of horseradish peroxidase (HRP). The results are assessed vis-a-vis those of cytochrome P450 compound I. It is shown that the two enzymatic species perform C=C epoxidation and C-H hydroxylation in a multistate reactivity scenario with Fe(III) and Fe(IV) electromeric situations and two different spin states, doublet and quartet. However, while the HRP species preferentially keeps the iron in a low oxidation state (Fe(III)), the cytochrome P450 species prefers the higher oxidation state (Fe(IV)). It is found that HRP compound I has somewhat lower barriers than those obtained by the cytochrome P450 species. Furthermore, in agreement with experimental observations and studies on model systems, HRP prefers C=C epoxidation, whereas cytochrome P450 prefers C-H hydroxylation. Thus, had the compound I species of HRP been by itself, it would have been an epoxidizing agent, and at least as reactive as cytochrome P450. In the enzyme, HRP is much less reactive than cytochrome P450, presumably because HRP reactivity is limited by the access of the substrate to compound I.

Alkenes↗
PubMed2004

Radical clock substrates, their C-H hydroxylation mechanism by cytochrome P450, and other reactivity patterns: what does theory reveal about the clocks' behavior?

There is an ongoing and tantalizing controversy regarding the mechanism of a key process in nature, C-H hydroxylation, by the enzyme cytochrome P450 (Auclaire, K.; Hu, Z.; Little, D. M.; Ortiz de Montellano, P. R.; Groves, J. T. J. Am. Chem. Soc. 2002, 124, 6020-6027. Newcomb, M.; Aebisher, D.; Shen, R.; Esala, R.; Chandrasena, P.; Hollenberg, P. F.; Coon, M. J. J. Am. Chem. Soc. 2003, 125, 6064-6065). To definitely resolve this controversy, theory must first address the actual systems that have been used by experiment, and that generated the controversy. This is done in the present paper, which constitutes the first extensive theoretical study of such two experimental systems, trans-2-phenylmethyl-cyclopropane (1) and trans-2-phenyl-iso-propylcyclopropane (4). The theoretical study of these substrates reveals that the only low energy pathway for C-H hydroxylation is the two-state rebound mechanism described originally for methane hydroxylation (Ogliaro, F.; Harris, N.; Cohen, S.; Filatov, M.; de Visser, S. P.; Shaik, S. J. Am. Chem. Soc. 2000, 122, 8977-8989). The paper shows that the scenario of a two-state rebound mechanism accommodates much of the experimental data. The computational results provide a good match to experimental results concerning the very different extents of rearrangement for 1 (20-30%) vs 4 (virtually none), lead to product isotope effect for the reaction of 1, in the direction of the experimental result, and predict as well the observed metabolic switching from methyl to phenyl hydroxylation, which occurs upon deuteration of the methyl group. Furthermore, the study reveals that an intimate ion pair species involving an alkyl carbocation derived from 4 gives no rearranged products, again in accord with experiment. This coherent match between theory and experiment cannot be merely accidental; it comes close to being aproof that the actual mechanism of C-H hydroxylation involves the two-state reactivity revealed by theory. Analysis of the rearrangement modes of the carbocations derived from 1 and 4 excludes the participation of free carbocations during the hydroxylation of these substrates. Finally, the mechanistic significance of product isotope effect (different isotope effects for the rearranged and unrearranged alcohol products) is analyzed. It is shown to be a sensitive probe of two-state reactivity; the size of the intrinsic product isotope effect and its direction reveal the structural differences of the hydrogen abstraction transition states in the low-spin vs high-spin reaction manifolds.

Cyclopropanes↗
PubMed2003

Active species of horseradish peroxidase (HRP) and cytochrome P450: two electronic chameleons.

The active site of HRP Compound I (Cpd I) is modeled using hybrid density functional theory (UB3LYP). The effects of neighboring amino acids and of environmental polarity are included. The low-lying states have porphyrin radical cationic species (Por(*)(+)). However, since the Por(*)(+) species is a very good electron acceptor, other species, which can be either the ligand or side chain amino acid residues, may participate in electron donation to the Por(*)(+) moiety, thereby making Cpd I behave like a chemical chameleon. Thus, this behavior that was noted before for Cpd I of P450 is apparently much more wide ranging than initially appreciated. Since chemical chameleonic behavior property was found to be expressed not only in the properties of Cpd I itself, but also in its reactivity, the roots of this phenomenon are generalized. A comparative discussion of Cpd I species follows for the enzymes HRP, CcP, APX, CAT (catalase), and P450.

Binding Sites↗
PubMed2003

Can a single oxidant with two spin states masquerade as two different oxidants? A study of the sulfoxidation mechanism by cytochrome p450.

Density functional calculations were performed on the sulfoxidation reaction by a model compound I (Cpd I) of cytochrome P450. By contrast to previous alkane hydroxylation studies, which exhibit a dominant low-spin (LS) pathway, the sulfoxidation follows a dominant high-spin (HS) reaction. Thus, competing hydroxylation and sulfoxidation processes as observed for instance by Jones et al. (Volz, T. J.; Rock, D. A.; Jones, J. P. J. Am. Chem. Soc. 2002, 124, 9724) are the result of a two-state reactivity scenario, whereby the hydroxylation originates from the LS pathway and the sulfoxidation from the HS pathway. In this manner, two spin states of a single oxidant (Cpd I) can be disguised as two different oxidants. The calculations rule out the possibility that a second oxidant (the ferric peroxide, Cpd 0 species) interferes in the observed results of Jones et al.

Cytochrome P-450 Enzyme System↗
PubMed2003

Is the ruthenium analogue of compound I of cytochrome p450 an efficient oxidant? A theoretical investigation of the methane hydroxylation reaction.

High-valent metal-oxo complexes catalyze C-H bond activation by oxygen insertion, with an efficiency that depends on the identity of the transition metal and its oxidation state. Our study uses density functional calculations and theoretical analysis to derive fundamental factors of catalytic activity, by comparison of a ruthenium-oxo catalyst with its iron-oxo analogue toward methane hydroxylation. The study focuses on the ruthenium analogue of the active species of the enzyme cytochrome P450, which is known to be among the most potent catalysts for C-H activation. The computed reaction pathways reveal one high-spin (HS) and two low-spin (LS) mechanisms, all nascent from the low-lying states of the ruthenium-oxo catalyst (Ogliaro, F.; de Visser, S. P.; Groves, J. T.; Shaik, S. Angew. Chem. Int. Ed. 2001, 40, 2874-2878). These mechanisms involve a bond activation phase, in which the transition states (TS's) appear as hydrogen abstraction species, followed by a C-O bond making phase, through a rebound of the methyl radical on the metal-hydroxo complex. However, while the HS mechanism has a significant rebound barrier, and hence a long lifetime of the radical intermediate, by contrast, the LS ones are effectively concerted with small barriers to rebound, if at all. Unlike the iron catalyst, the hydroxylation reaction for the ruthenium analogue is expected to follow largely a single-state reactivity on the LS surface, due to a very large rebound barrier of the HS process and to the more efficient spin crossover expected for ruthenium. As such, ruthenium-oxo catalysts (Groves, J. T.; Shalyaev, K.; Lee, J. In The Porphyrin Handbook; Biochemistry and Binding: Activation of Small Molecules, Vol. 4; Kadish, K. M., Smith, K. M., Guilard, R., Eds.; Academic Press: New York, 2000; pp 17-40) are expected to lead to more stereoselective hydroxylations compared with the corresponding iron-oxo reactions. It is reasoned that the ruthenium-oxo catalyst should have larger turnover numbers compared with the iron-oxo analogue, due to lesser production of suicidal side products that destroy the catalyst (Ortiz de Montellano, P. R.; Beilan, H. S.; Kunze, K. L.; Mico, B. A. J. Biol. Chem. 1981, 256, 4395-4399). The computations reveal also that the ruthenium complex is more electrophilic than its iron analogue, having lower hydrogen abstraction barriers. These reactivity features of the ruthenium-oxo system are analyzed and shown to originate from a key fundamental factor, namely, the strong 4d(Ru)-2p(O,N) overlaps, which produce high-lying pi(Ru-O), sigma(Ru-O), and sigma(Ru-N) orbitals and thereby to lead to a preference of ruthenium for higher-valent oxidation states with higher electrophilicity, for the effectively concerted LS hydroxylation mechanism, and for less suicidal complexes. As such, the ruthenium-oxo species is predicted to be a more robust catalyst than its iron-oxo analogue.

Biomimetic Materials↗
PubMed2002

What factors affect the regioselectivity of oxidation by cytochrome p450? A DFT study of allylic hydroxylation and double bond epoxidation in a model reaction.

Epoxidation (C=C) vis-à-vis allylic hydroxylation (C-H) reactions of propene with a model compound I (Cpd I) of the enzyme cytochrome P450 were studied using B3LYP density functional theory. Potential energy profiles and kinetic isotope effects (KIE) were calculated. The interactions in the protein pocket were mimicked by adding two external NH- - -S hydrogen bonds to the thiolate ligand and by introducing a nonpolar medium (with a dielectric constant, epsilon = 5.7) that can exert a polarization effect on the reacting species. A two-state reactivity (TSR) with high-spin (HS) and low-spin (LS) states were located for both processes (Ogliaro, F.; Harris, N.; Cohen, S.; Filatov, M.; de Visser, S. P.; Shaik, S. J. Am. Chem. Soc. 2000, 122, 8977-8989. de Visser, S. P.; Ogilaro, F.; Harris, N.; Shaik, S. J. Am. Chem. Soc. 2001, 123, 3037-3047). The HS processes were found to be stepwise, whereas the LS processes were characterized as nonsynchronous but effectively concerted pathways. The computed KIE for C-H hydroxylation with and without tunneling corrections are large (>7), and they support the assignment of the corresponding transition states as hydrogen-abstraction species (Groves, J. T.; Han, Y.-Z. In Cytochrome P450: Structures, Mechanism and Biochemistry, 2nd ed.; Ortiz de Montellano, P. R., Ed.; Plenum Press: New York, 1995; Chapter 1; pp 3-48). In the gas phase, epoxidation is energetically favorable by 3.4 kcal mol(-1). Inclusion of zero-point energy reduces this difference but still predicts C=C/C-H > 1. Environmental effects were found to have major impact on the C=C/C-H ratio as well as on the stereoselectivity of the processes. Thus, two NH- - -S hydrogen bonds away from the reaction center reverse the regioselectivity and prefer hydroxylation, namely, C=C/C-H <1. The polarity of the medium further accentuates the trend and leads to a change by 2 orders of magnitude in the regioselectivity, C=C/C-H << 1. Furthermore, since the environmental interactions prefer the LS over the HS reactions, both hydroxylation and epoxidation processes are rendered more stereoselective, again by 2 orders of magnitude. It follows, therefore, that Cpd I is a chameleon oxidant (Ogliaro, F.; Cohen, S.; de Visser, S. P.; Shaik, S. J. Am. Chem. Soc. 2000, 122, 12892-12893; Ogliaro, F.; de Visser, S. P.; Cohen, S.; Kaneti, J.; Shaik, S. Chembiochem. 2001, 2, 848-851; Ogliaro, F.; de Visser, S. P.; Groves, J. T.; Shaik, S. Angew. Chem., Int. Ed. 2001, 40, 2874-2878) that tunes its reactivity and selectivity patterns in response to the protein environment in which it is accommodated. A valence bond (VB) model, akin to "redox mesomerism" (Bernadou, J.; Fabiano, A.-S.; Robert, A.; Meunier, B. J. Am. Chem. Soc. 1994, 116, 9375-9376), is constructed and enables the description of a chameleon transition state. It shows that the good donor ability of the thiolate ligand and the acceptor ability of the iron porphyrin create mixed-valent situations that endow the transition state with a great sensitivity to external perturbations as in the protein pocket. The model is used to discuss the computed results and to relate them to experimental findings.

Alkenes↗
PubMed2002

Searching for the second oxidant in the catalytic cycle of cytochrome P450: a theoretical investigation of the iron(III)-hydroperoxo species and its epoxidation pathways.

Iron(III)-hydroperoxo, [Por(CysS)Fe(III)-OOH](-), a key species in the catalytic cycle of cytochrome P450, was recently identified by EPR/ENDOR spectroscopies (Davydov, R.; Makris, T. M.; Kofman, V.; Werst, D. E.; Sligar, S. G.; Hoffman, B. M. J. Am. Chem. Soc. 2001, 123, 1403-1415). It constitutes the last station of the preparative steps of the enzyme before oxidation of an organic compound and is implicated as the second oxidant capable of olefin epoxidation (Vaz, A. D. N.; McGinnity, D. F.; Coon, M. J. Proc. Natl. Acad. Sci. U.S.A. 1998, 95, 3555-3560), in addition to the penultimate active species, Compound I (Groves, J. T.; Han, Y.-Z. In Cytochrome P450: Structure, Mechanism and Biochemistry, 2nd ed.; Ortiz de Montellano, P. R., Ed.; Plenum Press: New York, 1995; pp 3-48). In response, we present a density functional study of a model species and its ethylene epoxidation pathways. The study characterizes a variety of properties of iron(III)-hydroperoxo, such as the O-O bonding, the Fe-S bonding, Fe-O and Fe-S stretching frequencies, its electron attachment, and ionization energies. Wherever possible these properties are compared with those of Compound I. The proton affinities for protonation on the proximal and distal oxygen atoms of iron(III)-hydroperoxo, and the effect of the thiolate ligand thereof, are determined. In accordance with previous results (Harris, D. L.; Loew, G. H. J. Am. Chem. Soc. 1998, 120, 8941-8948), iron(III)-hydroperoxo is a strong base (as compared with water), and its distal protonation leads to a barrier-free formation of Compound I. The origins of this barrier-free process are discussed using a valence bond approach. It is shown that the presence of the thiolate is essential for this process, in line with the "push effect" deduced by experimentalists (Sono, M.; Roach, M. P.; Coulter, E. D.; Dawson, J. H. Chem. Rev. 1996, 96, 2841-2887). Finally, four epoxidation pathways of iron(III)-hydroxperoxo are located, in which the species transfers oxygen to ethylene either from the proximal or from the distal sites, in both concerted and stepwise manners. The barriers for the four mechanisms are 37-53 kcal/mol, in comparison with 14 kcal/mol for epoxidation by Compound I. It is therefore concluded that iron(III)-hydroperoxo, as such, cannot be a second oxidant, in line with its significant basicity and poor electron-accepting capability. Possible versions of a second oxidant are discussed.

Catalysis↗