PubMed Health⌕ Search

Biomedical subjects

Paola Torricelli

Publications and source records attributed to Paola Torricelli.

At least 19 recordsLinked to original sources

In vitro study comparing two collageneous membranes in view of their clinical application for rotator cuff tendon regeneration.

Tenocytes were isolated from the rotator cuff tendons of healthy (HT) and glucocorticoid (GC)-treated rats (GCT) and were cultured on polystyrene wells (TCP) as control, and on 2 de-cellularized collagen matrices: porcine small intestinal submucosa (SIS), and human dermal matrix (Graftjacket, GJ). At 3 and 7 days cell proliferation and synthesis were evaluated. Proliferation of HT tenocytes increased between experimental times for both tested membranes, but already at 3 days, HT tenocytes cultured on GJ showed the highest WST-1 value. The collagen-I (CICP) synthesis on GJ membrane did not change between experimental times and was significantly higher than TCP and SIS at 7 days. Proteoglycans (PG), and fibronectin (FBN) synthesis increased when HT were cultured on GJ, between experimental times, and both PG and FBN synthesis on GJ membrane were higher than TCP and SIS at 7 days. GC determined decreases in cell proliferation, CICP and PG syntheses at 3 days of culture on TCP when compared to HT tenocytes while a decrease in WST-1 was maintained at 7 days. CICP, PG and FBN (only at 3 days) syntheses were significantly higher in GCT tenocytes cultured on GJ. The negative effects on GC on GCT tenocytes cultured on membrane were particularly evident on SIS for CICP (-18%) and FBN (-67%) synthesis. The obtained results support the conclusion that GJ is more suitable than SIS as a scaffold for in situ tissue engineering and for the in vitro bioengineering of tendons to heal massive tears of the rotator cuff tendon.

Animals↗

Nanocomposites of hydroxyapatite with aspartic acid and glutamic acid and their interaction with osteoblast-like cells.

The direct synthesis of hydroxyapatite (HA)-aspartic acid (ASP) and HA-glutamic acid (GLU) nanocrystals was carried out in presence of different amounts of the amino acids in solution. ASP and GLU incorporation into HA crystals reduces the coherent length of the perfect crystalline domains along the long dimension (002) and, even more, along the cross section (310) of the apatite crystals, suggesting a specific interaction of the amino acids with the HA structure. FTIR analysis indicates that the carboxylic groups of the acidic amino acids interact with the calcium ions of HA. The relative amount of ASP incorporation into HA nanocrystals is greater than that of GLU, suggesting a greater affinity of ASP for HA. Osteoblast-like, MG63, cells cultured on the composite nanocrystals display good proliferation and increased values of ALP activity, collagen type I, TGF-betaI and osteocalcin production, indicating that the presence of the acidic amino acids enhances osteoblast activation and extra-cellular matrix mineralization processes.

Aspartic Acid↗

Early effects of extracorporeal shock wave treatment on osteoblast-like cells: a comparative study between electromagnetic and electrohydraulic devices.

BACKGROUND: Extracorporeal shockwave therapy (ESWT) has been increasingly applied to treat orthopedic and musculoskeletal pathologies. ESWT involves mechanical perturbations that, as with other physical therapies, can result in mechanical stimuli to a large number of cells, including bone cells. The aim of this study was to evaluate the effects of shock waves on osteoblast-like cells (MG63) when using two different generators of shock waves (electrohydraulic and electromagnetic devices), in terms of cell damage, cell viability, osteogenic phenotype expression, and cytokine production. METHODS: MG63 cells were suspended in 1.5 mL screw-cap cryotubes (1 x 10 cells/mL), containing phosphate buffer solution (PBS), which were maintained at 37 degrees C during all the experimental times. Two levels of energy flux density (EFD) were evaluated for each device: 0.15 to 0.18 mJ/mm2 and 0.40 mJ/mm2. Cells were then cultivated for 72 hours starting from a concentration of 1 x 10 cells/mL, and biological activity and viability were evaluated 24 and 72 hours after treatment. RESULTS: The results obtained demonstrate that the factors most affecting osteoblast activity involve both the device and the level of EFD selected, and they must be considered all together. CONCLUSIONS: The use of the electromagnetic device and a level of EFD lower than 0.40 mJ/mm2 would appear to induce fewer immediate cytodestructive effects and better stimulate subsequent proliferation and the synthetic activity of MG63.

Cell Survival↗

Hyaluronic acid hydrogel added with ibuprofen-lysine for the local treatment of chondral lesions in the knee: in vitro and in vivo investigations.

The effect of hyaluronan-based hydrogel with a cross-linking degree of 50% (i.e., the amount of carboxylate groups involved in the cross-lining reaction) (Hyal 50%), loaded with an anti-inflammatory drug (ibuprofen-lysine) for local administration in the osteoarthritic knee was evaluated. The kinetic of drug release from Hyal 50% hydrogel was performed in vitro by a continuous flow system. The release was studied at three different rates (0.375, 0.073, and 0.005 mL/s), and for the slowest one a period of 8 days was necessary to receive the complete release of the drug. A chondral defect was caused in the right femoral medial condyle of 24 rabbits. Twelve animals were treated with Hyal 50%+ibuprofen-lysine and 12 with Hyal 50% by percutaneous injection. The treatments were repeated every 10 days, for three or five times. At 30 and 50 days, no significant differences were observed between the groups (mean score at 30 days: 4.4+/-0.6 in Hyal 50%-treated group and 5.1+/-0.7 in Hyal 50% +Ibuprofen-lysine-treated group; mean score at 50 days: 6.9+/-0.6 in Hyal 50%-treated group and 7.1+/-0.6 in Hyal 50%+ Ibuprofen-lysine-treated group). A significant difference was observed in bone mineral density of the total tibia of rabbits treated by Hyal 50% + Ibuprofen-lysine in comparison with those treated only by Hyal 50%. The positive effects of Hyal 50% on chondral lesions were maintained in the presence of ibuprofen-lysine with the adjunctive effect of an increased limb usage, most likely due to less pain and discomfort.

Animals↗

Physical characterization of different-roughness titanium surfaces, with and without hydroxyapatite coating, and their effect on human osteoblast-like cells.

The aim of this study was to characterize and compare various titanium (Ti) and hydroxyapatite (HA) coatings on Ti6Al4V, in view of their application on noncemented orthopedic implants. Two innovative vacuum plasma sprayed (VPS) coatings, the first of ultrahigh rough and dense Ti (PG60, Ra=74 microm) and the second of ultrahigh rough and dense Ti coated with HA (HPG60, Ra=52 microm), have been developed, and the response of osteoblast-like cells (MG-63) seeded on these new coatings was evaluated in comparison to: a low roughness and sandblasted (Ti/SA, Ra=4 microm) Ti6Al4V surface; Ti medium (TI01, Ra=18 microm), and high (TI60, Ra=40 microm) roughness VPS coatings; and the relative Ti plus HA duplex coatings (HT01, Ra=12 microm and HT60, Ra=36 microm respectively), also obtained by VPS. PG60 coating presented no open porosity, making it dense and potentially intrinsically stronger. Cell adhesion and proliferation on PG60 was similar to those of the smoothest one (Ti/SA) and adhesion on ultrahigh roughness was lower than the medium- and high-roughness coatings, whereas cell proliferation on PG60 was lower than TI60. The HA coating determined significant increases in cell proliferation at medium and high roughness levels when compared to the relative Ti coating, but not compared to the ultrahigh one; all HA-coated surfaces showed a decrease in alkaline phosphatase activity and collagen I production. Surface morphology and the HA coating strongly affected cell behavior. However, ultrahigh values of roughness are not correctly seen by cells, and the presence of HA has no improving effects.

Biocompatible Materials↗

Comparative in vitro study on a ultra-high roughness and dense titanium coating.

A new implant surface has been developed with the purpose of avoiding as much stress shielding as possible, and thus prolong the prosthesis lifespan. The aim of this study was to investigate the in vitro effect of this new ultra-high roughness and dense Titanium (Ti) surface (PG60, Ra = 74 microm) in comparison with medium (TI01, Ra = 18 microm) and high (TI60, Ra = 40 microm) roughness and open porous coatings; all the coatings were obtained by vacuum plasma spraying. MG63 osteoblast-like cells were seeded on the tested materials and polystyrene, as control, for 3 and 7 days. Cells proliferated on the material surfaces similarly to the control. Alkaline phosphatase activity had lower values for TI60 than TI01 (p < 0.0005) and PG60 (p < 0.005). Osteocalcin levels measured on TI60 were significantly (p < 0.0005) lower in comparison with TI01 and PG60 at 7 days. Procollagen-I synthesis reduced with increasing roughness and the lowest data was found for PG60. While at 3 days Transforming Growth Factor beta1 levels augmented with increasing roughness, at 7 days TI60, the high roughness surface, was significantly lower than PG60 (p < 0.005) and TI01 (p < 0.001). All tested materials showed significantly higher Interleukin-6 levels than those of polystyrene at both experimental times. Nitric Oxide activity on TI01 was significantly (p < 0.05) higher than on TI60 and polystyrene. In conclusion, the new ultra-high roughness and dense coating PG60 provided a good biological response, even though, at least in vitro, it behaved similarly to the coatings already used in orthopaedics.

Alloys↗

Proliferative and re-defferentiative effects of photo-immobilized micro-patterned hyaluronan surfaces on chondrocyte cells.

A photo-immobilisation procedure was utilised to create two different micro-patterned surfaces (tracks 25 and 5 microm wide) of hyaluronan (Hyal) on polyethylene-terephthalate (PET) previously plasma activated. Aim of the study was to investigate the proliferation and re-differentiation capacity of articular chondrocytes cultured on micro-patterned Hyal, compared to homogeneous Hyal and plain plasma-treated (pt-)PET substrates. Cytotoxicity, cell proliferation, activation and differentiation of articular knee cartilage chondrocytes (Mongrel sheep) were evaluated after 14 days of culture. It was found that micro-patterned Hyal surfaces induced the adhesion, migration and alignment of chondrocytes, as shown by light and scanning electron microscopy. Furthermore, the same surfaces induced chondrocyte differentiation, with a significant increase of aggrecan and collagen type II production, while homogeneous Hyal and pt-PET surfaces did not.

Aggrecans↗

Biomimetic PMMA-based bone substitutes: a comparative in vitro evaluation of the effects of pulsed electromagnetic field exposure.

Pulsed electromagnetic fields (PEMFs) are known to be effective in the stimulation of cultured osteoblasts and in vivo healing of delayed and nonunion fractures. In the present in vitro study the effects of PEMFs on osteoblastic cell cultures (MG63 human osteoblast-like cells) grown in the presence of poly-methylmethacrylate (PMMA) and of a biomimetic bone substitute made of a PMMA matrix added with alfa-tricalcium phosphate (PMMA+alpha-TCP) were evaluated, to assess the biological response at the cell-biomaterial interaction. Cultures were stimulated with PEMFs (75 Hz, 2.3 mT, 1.3-ms pulse duration) 12 h/day for 3 days and evaluations (MTT, ALP, OC, PICP, TGFbeta-1, IL-6) were performed at 3 and 6 days. PMMA had a negative effect on osteoblasts, whereas PMMA+alpha-TCP enhanced production of ALP, PICP, OC and TGFbeta-1, and reduced IL-6 levels. Cells responded positively to PEMF stimulation even when cultured with a poorly biocompatible material, such as PMMA. This effect was more evident in the presence of PMMA+alpha-TCP (further improvement in proliferation and synthetic activity) both at 3 and at 6 days. The properties of PMMA+alpha-TCP look promising, and the present results support the use of PEMFs to improve tissue response to biomaterials implanted as bone substitutes.

Bone Substitutes↗

Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone.

Improvement of the implant-bone interface is still an open problem and the interest in chemical modification of implant surfaces for cementless fixation has grown steadily over the past decade. Mechanical and histomorphometric investigations were performed at different times on implants inserted into sheep femoral cortical bone to compare the in vivo osseointegration of titanium screws ( X 3.5 x 7 mm length) with different surface treatments. After 8 weeks of implantation, the push-out force of anodized and hydrothermally treated implants (ANODIC) was significantly higher than that of machined implants (MACH) (36%, p<0.0005), whereas a decrease of 39% was observed for acid-etched implants (HF) when compared to other surface treatments. After 12 weeks of implantation, the push-out force values of HF implants were still significantly lower than those observed for MACH (-19%, p<0.01) and hydroxyapatite vacuum plasma-sprayed implants (HAVPS, -25%, p<0.0005), and the highest push-out force was found in HAVPS (p<0.001) implants. After 8 and 12 weeks of implantation, the AI of HF implants was significantly (p<0.05) lower ( approximately -25%) than that of MACH, HAVPS and ANODIC implants. In conclusion, results appear to confirm that there are no specific differences between ANODIC and HAVPS implants in terms of behavior. Moreover, although MACH implants show some surface contaminating agents, they appear to ensure good osseointegration within 12 weeks both mechanically and histomorphometrically, as do ANODIC and HAVPS implants. However, further studies are required to investigate bone hardness and mineralization around implants.

Animals↗

Osseointegration of endosseous ceramic implants after postoperative low-power laser stimulation: an in vivo comparative study.

Stimulation with low-power laser (LPL) can enhance bone repair as reported in experimental studies on bone defects and fracture healing. Little data exist concerning the use of LPL postoperative stimulation to improve osseointegration of endosseous implants in orthopaedic and dental surgery. An in vivo model was used for the present study to evaluate whether Ga-Al-As (780 nm) LPL stimulation can improve biomaterial osseointegration. After drilling holes, cylindrical implants of hydroxyapatite (HA) were placed into both distal femurs of 12 rabbits. From postoperative day 1 and for 5 consecutive days, the left femurs of all rabbits were submitted to LPL treatment (LPL group) with the following parameters: 300 J/cm2, 1 W, 300 Hz, pulsating emission, 10 min. The right femurs were sham-treated (control group). Three and 6 weeks after implantation, histomorphometric and microhardness measurements were taken. A higher affinity index was observed at the HA-bone interface in the LPL group at 3 (P<0.0005) and 6 weeks (P<0.001); a significant difference in bone microhardness was seen in the LPL group vs. the control group (P<0.01). These results suggest that LPL postoperative treatment enhances the bone-implant interface.

Aluminum↗

Human osteopenic bone-derived osteoblasts: essential amino acids treatment effects.

The development of in vitro cell culture methods has made it possible to study bone cell metabolism and growth and obtain a deeper insight into the pathophysiology of common orthopedic diseases such as osteoporosis. After analyzing the effect of two essential amino acids, L-arginine (Arg) and L-lysine (Lys), in previous in vitro and in vivo studies, the present authors investigated the administration of Arg and Lys in osteoblasts derived from human osteopenic bone. After isolation, osteoblasts were cultured in DMEM supplemented with either Arg (0.625 mg/ml/day, Arg Group) or Lys (0.587 mg/ml/day, Lys Group), or both of them (Arg-Lys Group), whereas the Control Group was sham-treated. After 7 days the following parameters were tested in all groups: MTT proliferation test, Alkaline Phosphatase (ALP), Nitric Oxide (NO), Calcium (Ca), Phosphorus (P), Osteocalcin (OC), C-Terminal Procollagen type I (PICP), Interleukin-6 (IL-6), Transforming Growth Factor-beta 1 (TGF-beta 1), Platelet Derived Growth Factor (PDGF) and Insulin-Like Growth Factor-I (IGF-I). Results were compared with those obtained from human healthy bone to verify the effect of the amino acids on osteoblasts derived from pathological tissue. In addition, a comparison was also made with the results obtained from rat osteopenic bone to assess reliability of the in vitro model. The current results support previous findings and indicate that Arg and Lys stimulation has a positive effect on osteoblast proliferation, activation and differentiation. Therefore, administration of these amino acids may be useful in clinical treatment and prevention of osteoporosis.

Aged↗

Osteoblasts cultured from osteoporotic bone: a comparative investigation on human and animal-derived cells.

In vitro studies on pathophysiology and innovative treatments of many orthopaedic diseases, based on the investigations of cells from pathologic skeletal tissues, greatly improve basic knowledge of osteoporosis. Primary osteoblast (OB) cultures derived from osteopenic bone from different species (human, rat, sheep) were compared to assess the differences that should be taken into account when performing in vitro biocompatibiliy tests or investigating pharmacological and physical treatments. Primary OB were isolated from osteopenic patients and animals by well-established methods and their metabolism was assessed with or without 1,25(OH)2D3. The greatest significant differences were observed between rat and human cells both under basal conditions and after 1,25(OH)2D3 stimulation. In addition, the response to 1,25(OH)2D3 stimulation of OBs from osteopenic rats was significantly different from that of human and sheep OB cultures, in terms of NO, OC, IL-6, and TGF-beta1. Cells derived from osteopenic sheep behaved much more similarly to those from humans, except for a significant difference in terms of TGF-beta1 observed both under basal conditions and after stimulation.

Animals↗

Primary osteoblasts response to shock wave therapy using different parameters.

Over the past decade extracorporeal shock-wave therapy (ESWT) has been increasingly applied to orthopaedic and musculoskeletal pathologies, the aim of this study was to assess how the energy density of the shock waves and the number of impulses affect viability, differentiation and synthetic activity of osteoblasts. Primary sheep osteoblasts cultures were treated with ESWT with an electro-hydraulic shock wave generator by selecting three different energy levels (14-21-28 kV corresponding at 0.15-0.31-0.40 mJ/mm2) and two different total numbers of impulses (500, 1000) for each level. At the end of treatment, cell counts and viability were recorded. Cells were then cultivated for 48 hours starting from a concentration of 1 x 10(4) cells/ml. The biological activity and viability were evaluated at 24 and 48 hours after treatment. No cytodestructive effects were observed in Group A, while a cytodestructive effect of ESWT was seen in cultures receiving the highest energy treatments. The different shock wave treatment induced differences in MTT assays after 24 and 48 hours, in particular the highest level showed a detrimental effect on cell respiration at both experimental times as compared to the Control Group and the protein metabolism was generally depressed by ESWT with impulses at the highest energy level. After 24 hours such effect further increased with the growing number of impulses. The lowest energy level appeared to significantly improve the metabolic parameter in primary cell cultures as compared to controls when 500 impulses were selected. The current study has demonstrated that one of the most important aspects to be considered is not the total number of impulses used but the energy level of the shock waves, thus confirming that ESWT has a dose-dependent effect on cells.

Animals↗

Effect of extracorporeal shock wave therapy on osteoblastlike cells.

Extracorporeal shock wave therapy has been used increasingly in musculoskeletal disorders although its biologic mechanisms are not understood completely. The current study evaluated the effects of extracorporeal shock wave therapy on human osteoblastlike cells by using an electrohydraulic shock wave generator and comparing three energy levels. (Group A, 14 kV and 0.15 mJ/mm2; Group B, 21 kV and 0.31 mJ/mm2; Group C, 28 kV and 0.40 mJ/mm2; Control Group, no energy) and two total impulses (500, 1000) for each level. At the end of treatment, a reduction by approximately 76% was observed in Group C cell number versus basal value when compared with the other groups. Viability, biochemical activity, and gene expression of cultured cells were evaluated 24 and 48 hours after treatment. The viability test showed a decrease in Group C viability of approximately 54% at both culture times as compared with the other groups. Significant increases in nitric oxide, osteocalcin, and transforming growth factor-beta1 production ranging from 10% to 35% were found in Group A. All treated groups had lower C-terminal procollagen Type I values than the Control Group, but important increases were observed between 24 and 48 hours in all groups except Group C. This particular finding reveals that osteoblast differentiation in Group A is enhanced strongly during the first 24 hours after exposure leading after another 24 hours to an increase in C-terminal procollagen Type I production and consequently in bone matrix deposition. The current study showed that one of the most important aspects to be considered is not the total number of impulses used, but the energy level of the shock waves, therefore confirming that extracorporeal shock wave therapy has a dose-dependent initial destructive effect on cells when the selected energy is higher than 21 kV.

Cell Survival↗

A bone substitute composed of polymethylmethacrylate and alpha-tricalcium phosphate: results in terms of osteoblast function and bone tissue formation.

The biological properties of a composite polymeric matrix (PMMA + alpha-TCP) made of polymethylmethacrylate (PMMA) and alfa-tricalciumphosphate (alpha-TCP) was tested by means of in vitro and in vivo investigations. PMMA was used as a comparative material. Osteoblast cultures (MG 63) demonstrated that PMMA + alpha-TCP significantly and positively affected osteoblast viability, synthetic activity and interleukin-6 level as compared to PMMA. At 12 weeks, the PMMA + alpha-TCP implants in rabbit bone successfully osteointegrated in trabecular and cortical tissue (affinity index: 57.14+/-8.84% and 68.31+/-6.18%, respectively). The newly formed bone after tetracycline labelling was histologically observed inside PMMA + alpha-TCP porosity. The microhardness test at the bone-PMMA + alpha-TCP interface showed a significantly higher rate of newly formed bone mineralization compared with PMMA (+83.5% and +58.5%, respectively), but differences still existed between newly formed and pre-existing normal bone. It is herein hypothesized that the present positive results may be ascribed to the porous macroarchitecture of PMMA + alpha-TCP and the presence of the bioactive ceramic material that could have a synergic effect and be responsible for the improvement of (a) the material colonization by bone cells, (b) osteoblast activity, (c) osteoinduction and osteoconduction processes, (d) bone remodelling.

Bone Cements↗

The effect of pulsed electromagnetic fields on the osteointegration of hydroxyapatite implants in cancellous bone: a morphologic and microstructural in vivo study.

Effects of pulsed electromagnetic fields (PEMFs, 75 Hz. 1.6 mT) were investigated in 12 rabbits after placing hydroxyapatite (HA) implants in their femoral condyles. Six animals were stimulated with PEMFs for three consecutive weeks, 6 h/day, while the remaining animals were sham-treated (Control Group). Rabbits were sacrificed at 3 and 6 weeks (after a 3-week non-stimulation period) for histomorphometric analysis and microhardness testing (at 200, 500, 1,000, 2,000 microm from the implant) around the implants. Histomorphometric analysis did not highlight any significant changes. On the contrary, there were statistically significant differences between the effects produced by PEMFs and Control Groups (F = 149.70, p < 0.0005) on the Affinity Index results, as well as by the experimental time of 6 and 3 weeks (F = 17.12, p = 0.001) on the same results. In PEMF-stimulated animals the microhardness (HV) values measured in trabecular bone at a distance of 200 and 500 microm from the implants, were significantly higher with respect to controls. At 6 weeks, HV values at the bone-implant interface in PEMF-stimulated animals were not significantly different with respect to normal bone, while they remained significantly lower in control animals. Both morphological and structural results demonstrated a positive therapeutic effect of PEMFs in accelerating HA osteointegration in trabecular bone.

Animals↗

The role of different chemical modifications of superoxide dismutase in preventing a prolonged muscular ischemia/ reperfusion injury.

It is well know that a long period of ischemia followed by reperfusion can create an irreversible tissue damage, also due to the excessive generation of oxygen-derived free radicals. A possibility for avoiding this syndrome is represented by the use of free radical scavengers, such as the superoxide dismutase (SOD). The current authors compared the results achieved through different modifications of this enzyme in an experimental rat hind limb model of ischemia/reperfusion. 60 rats that had a 4 hour and 30 minute ischemia of the left hind limb were divided into four groups of 15 each and treated using a physiological solution (control group), native SOD, monomethoxypolyethylene-glycol-SOD (mPEG-SOD) or poly(acryloilmorpholine)-SOD (PAcM-SOD). The outcomes obtained in terms of limb survival (p < 0.05), as well as histomorphologic studies (p < 0.0005), revealed a superior capacity of mPEG-SOD when compared with the other three substances.

Acrylic Resins↗

Human osteoblast cultures from osteoporotic and healthy bone: biochemical markers and cytokine expression in basal conditions and in response to 1,25(OH)2D3.

The development of methods to culture bone cells has enhanced in vitro studies and allowed researchers to investigate bone cell metabolism in healthy tissue and in various different bone diseases. Greater knowledge of cultures of pathologic bone tissue-derived osteoblasts may be helpful in performing in vitro experiments that test biomaterials and therapies to be used in the orthopedic field, since this kind of approach better reflects the conditions of clinical relevance to many patients. In the present study primary cultures of human osteoblastic cells were isolated from donors with osteoporosis (HOB, Human Osteopenic Bone) and their respective controls (HNB, Human Normal Bone). They were then characterized in baseline conditions and after stimulation with 10(-9) M 1,25(OH2)D3. Specific biochemical markers of bone cells and cytokines involved in bone turnover were evaluated to assess cell metabolism and any possible differences between osteoblasts derived from healthy and osteopenic bone tissue. Under baseline conditions, HNB and HOB in vitro cultures showed some differences in proliferation (MTT test), PICP, OC and IL-6. The HNB response to 1,25-(OH2)D3 stimulation differed significantly from that of the HOB cultures but only with regard to the MTT test, and ALP and PICP levels; the other selected parameters showed a similar behavior for both cultures. The current findings should be taken into account when cultures derived from human bone are used for in vitro experiments.

Alkaline Phosphatase↗