Biomedical subjects

Paolo Boccazzi

Publications and source records attributed to Paolo Boccazzi.

10 recordsLinked to original sources

PubMed2006

Microbioreactor arrays with integrated mixers and fluid injectors for high-throughput experimentation with pH and dissolved oxygen control.

We have developed an integrated array of microbioreactors, with 100 microL working volume, comprising a peristaltic oxygenating mixer and microfluidic injectors. These integrated devices were fabricated in a single chip and can provide a high oxygen transfer rate (k(L)a approximately 0.1 s(-1)) without introducing bubbles, and closed loop control over dissolved oxygen and pH (+/-0.1). The system was capable of supporting eight simultaneous Escherichia coli fermentations to cell densities greater than 13 g-dcw L(-1) (1 cm OD(650 nm) > 40). This cell density was comparable to that achieved in a 4 litre reference fermentation, conducted with the same strain, in a bench scale stirred tank bioreactor and is more than four times higher than cell densities previously achieved in microbioreactors. Bubble free oxygenation permitted near real time optical density measurements which could be used to observe subtle changes in the growth rate and infer changes in the state of microbial genetic networks. Our system provides a platform for the study of the interaction of microbial populations with different environmental conditions, which has applications in basic science and industrial bioprocess development. We leverage the advantages of microfluidic integration to deliver a disposable, parallel bioreactor in a single chip, rather than robotically multiplexing independent bioreactors, which opens a new avenue for scaling small scale bioreactor arrays with the capabilities of bench scale stirred tank reactors.

Ammonium Hydroxide↗

PubMed2006

Microchemostat-microbial continuous culture in a polymer-based, instrumented microbioreactor.

In a chemostat, microbial cells reach a steady state condition at which cell biomass production, substrates and the product concentrations remain constant. These features make continuous culture a unique and powerful tool for biological and physiological research. We present a polymer-based microbioreactor system integrated with optical density (OD), pH, and dissolved oxygen (DO) real-time measurements for continuous cultivation of microbial cells. Escherichia coli (E. coli) cells are continuously cultured in a 150 microL, membrane-aerated, well-mixed microbioreactor fed by a pressure-driven flow of fresh medium through a microchannel. Chemotaxisial back growth of bacterial cells into the medium feed channel is prevented by local heating. Using poly(ethylene glycol) (PEG)-grafted poly(acrylic acid) (PAA) copolymer films, the inner surfaces of poly(methyl methacrylate) (PMMA) and poly(dimethylsiloxane) (PDMS) of the microbioreactor are modified to generate bio-inert surfaces resistant to non-specific protein adsorption and cell adhesion. The modified surfaces of microbioreactor effectively reduce wall growth of E. coli for a prolonged period of cultivation. Steady state conditions at different dilution rates are demonstrated and characterized by steady OD, pH, and DO levels.

Acrylic Resins↗

PubMed2006

A well-mixed, polymer-based microbioreactor with integrated optical measurements.

We describe a 150 microL microbioreactor fabricated in poly(methylmethacrylate) (PMMA) and poly(dimethylsiloxane) (PDMS) to cultivate microbial cell cultures. Mixing is achieved by a small magnetic stir bar and fluorescent sensors are integrated for on-line measurement of pH and dissolved oxygen. Optical transmission measurements are used for cell density. The body of the reactor is poly(methylmethacrylate) with a thin layer of poly (dimethylsiloxane) for aeration, oxygen diffuses through this gas-permeable membrane into the microbioreactor to support metabolism of bacterial cells. Mixing in the reactor is characterized by observation of mixing of dyes and computational fluid dynamics simulations. The oxygenation is described in terms of measured K(L)a values for microbioreactor, 20-75/h corresponding to increasing stirring speed 200-800 rpm. Escherichia coli cell growth in the microbioreactor is demonstrated and the growth behavior is benchmarked with conventional bench-scale bioreactors, flasks and tubes. Batch culture experiments with Saccharomyces cerevisiae further demonstrate the reproducibility and flexibility of the microbioreactor system.

Bioreactors↗

PubMed2006

In situ measurement of bioluminescence and fluorescence in an integrated microbioreactor.

Reporter strains of bacteria that emit light or a fluorescent marker in response to specific conditions in their environment are having a significant impact in many areas of biology, including toxicity assays for environmental pollutants, chemical detection, and gene expression profiling. We have demonstrated methods for in situ measurements of bioluminescence and fluorescence from bacterial cultures grown in 50 microL instrumented microbioreactors. Results from microbioreactors were compared to results obtained from conventional 500 mL batch bioreactors and shake flasks. Experiments were conducted with reporter strains of Escherichia coli in which luxCDABE or gfp was fused to a promoter that was either expressed constitutively, or that responded to oxygen limitation. With these reporter strains, we have demonstrated the ability to obtain information on growth conditions within the microbioreactor. We have also shown that the large aspect ratio of the microbioreactor provides a unique advantage over measurements in larger bioreactors by reducing the inner filter effect in on-line measurements and eliminating the need for error-prone off-line dilutions. In addition, continuous on-line monitoring of genes in real-time, when expanded to include entire reporter libraries, could potentially provide a true dynamic picture of cellular gene expression from which the kinetics of gene expression can be untangled and elucidated.

Bioreactors↗

PubMed2005

Gene expression analysis of Escherichia coli grown in miniaturized bioreactor platforms for high-throughput analysis of growth and genomic data.

Combining high-throughput growth physiology and global gene expression data analysis is of significant value for integrating metabolism and genomics. We compared global gene expression using 500 ng of total RNA from Escherichia coli cultures grown in rich or defined minimal media in a miniaturized 50-microl bioreactor. The microbioreactor was fabricated out of poly(dimethylsiloxane) (PDMS) and glass and equipped to provide on-line, optical measurements. cDNA labeling for microarray hybridizations was performed with the GeniconRLS system. From these experiments, we found that the expression of 232 genes increased significantly in cells grown in minimum medium, including genes involved in amino acid biosynthesis and central metabolism. The expression of 275 genes was significantly elevated in cells grown in rich medium, including genes involved in the translational and motility apparatuses. In general, these changes in gene expression levels were similar to those observed in 1,000-fold larger cultures. The increasing rate at which complete genomic sequences of microorganisms are becoming available offers an unprecedented opportunity for investigating these organisms. Our results from microscale cultures using just 500 ng of total RNA indicate that high-throughput integration of growth physiology and genomics will be possible with novel biochemical platforms and improved detection technologies.

Bioreactors↗

PubMed2005

Development of a multiplexed microbioreactor system for high-throughput bioprocessing.

A multiplexed microbioreactor system for parallel operation of multiple microbial fermentation is described. The system includes miniature motors for magnetic stirring of the microbioreactors and optics to monitor the fermentation parameters optical density (OD), dissolved oxygen (DO), and pH, in-situ and in real time. The microbioreactors are fabricated out of poly(methylmethacrylate)(PMMA) and poly(dimethylsiloxane)(PDMS), and have a working volume of 150 microl. Oxygenation of the cells occurs through a thin PDMS membrane at the top of the reactor chamber. Stirring is achieved with a magnetic spin bar in the reactor chamber. Parallel microbial fermentations with Escherichia coli are carried out in four stirred microbioreactors and demonstrate the reproducible performance of the multiplexed system. The profiles for OD, DO, and pH compare favourably to fermentations performed in bioreactor systems with multiple bench-scale reactors. Finally, the multiplexed system is used to compare two different reactor designs, demonstrating that the reproducibility of the system permits the quantification of microbioreactor performance.

Bioreactors↗

PubMed2005

Methanol-dependent gene expression demonstrates that methyl-coenzyme M reductase is essential in Methanosarcina acetivorans C2A and allows isolation of mutants with defects in regulation of the methanol utilization pathway.

Methanosarcina acetivorans C2A is able to convert several substrates to methane via at least four distinct methanogenic pathways. A common step in each of these pathways is the reduction of methyl-coenzyme M (CoM) to methane catalyzed by methyl-CoM reductase (MCR). Because this enzyme is used in each of the known pathways, the mcrBDCGA operon, which encodes MCR, is expected to be essential. To validate this prediction, a system for conditional gene inactivation was developed. A heterologous copy of the mcrBDCGA operon was placed under the control of the highly regulated mtaC1 promoter, which directs the expression of genes involved in methanol utilization, and recombined onto the M. acetivorans chromosome. This allowed for disruption of the endogenous mcr operon in the presence of methanol. Because the PmtaC1 promoter is transcribed only during growth on methanol, mcrBDCGA was rendered methanol dependent and the strain was unable to grow in trimethylamine media, strongly suggesting that mcrBDCGA is essential. Upon prolonged incubation, suppressed mutants which expressed mcrBDCGA constitutively could be selected. Expression analysis of PmtaC1::uidA gene fusions in several isolated suppressed mutants suggests that they carry trans-active mutations leading to deregulation of all genes under control of this promoter. Subsequently, proteome analysis of one such suppressed mutant revealed that all known proteins derived from mtaC1 promoter-dependent expression were constitutively expressed in this mutant. This genetic system can therefore be employed for the testing of essential genes and for the identification of genes under a common regulatory mechanism by making regulatory mutations phenotypically selectable.

Gene Deletion↗

PubMed2004

Membrane-aerated microbioreactor for high-throughput bioprocessing.

A microbioreactor with a volume of microliters is fabricated out of poly(dimethylsiloxane) (PDMS) and glass. Aeration of microbial cultures is through a gas-permeable PDMS membrane. Sensors are integrated for on-line measurement of optical density (OD), dissolved oxygen (DO), and pH. All three parameter measurements are based on optical methods. Optical density is monitored via transmittance measurements through the well of the microbioreactor while dissolved oxygen and pH are measured using fluorescence lifetime-based sensors incorporated into the body of the microbioreactor. Bacterial fermentations carried out in the microbioreactor under well-defined conditions are compared to results obtained in a 500-mL bench-scale bioreactor. It is shown that the behavior of the bacteria in the microbioreactor is similar to that in the larger bioreactor. This similarity includes growth kinetics, dissolved oxygen profile within the vessel over time, pH profile over time, final number of cells, and cell morphology. Results from off-line analysis of the medium to examine organic acid production and substrate utilization are presented. By changing the gaseous environmental conditions, it is demonstrated that oxygen levels within the microbioreactor can be manipulated. Furthermore, it is demonstrated that the sensitivity and reproducibility of the microbioreactor system are such that statistically significant differences in the time evolution of the OD, DO, and pH can be used to distinguish between different physiological states. Finally, modeling of the transient oxygen transfer within the microbioreactor based on observed and predicted growth kinetics is used to quantitatively characterize oxygen depletion in the system.

Acetates↗

PubMed2002

Directed mutagenesis and plasmid-based complementation in the methanogenic archaeon Methanosarcina acetivorans C2A demonstrated by genetic analysis of proline biosynthesis.

We report here the first use of directed mutagenesis in Methanosarcina acetivorans C2A. The method employs homologous recombination-mediated gene replacement and was used to construct a variety of proline auxotrophs with mutations in the proABC locus. Each mutation was also complemented in trans with autonomously replicating Methanosarcina-Escherichia plasmid shuttle vectors.

Aldehyde Oxidoreductases↗

PubMedDate not supplied

Differential gene expression profiles and real-time measurements of growth parameters in Saccharomyces cerevisiae grown in microliter-scale bioreactors equipped with internal stirring.

Combining real-time growth kinetics measurements with global gene expression analysis of microbial cultures is of significant value for high-throughput biological research. We have performed differential gene expression analysis in the eukaryotic model Saccharomyces cerevisiae grown in galactose and glucose media in 150 muL bioreactors equipped with sensors for in situ and real-time measurements of optical density (OD), pH, and dissolved oxygen (DO). The microbioreactors were fabricated from poly(dimethylsiloxane) (PDMS) and poly(methyl methacrylate) (PMMA) and equipped with internal magnetic ministirrers and evaporation compensation by water replacement. In galactose-grown cells, the core genes of the GAL operon GAL2, GAL1, GAL7, and GAL10 were upregulated at least 100-fold relative to glucose-grown cells. These differential gene expression levels were similar to those observed in large-scale culture vessels. The increasing rate at which complete genomic sequences of microorganisms are becoming available offers an unprecedented opportunity for comparative investigations of these organisms. Our results from S. cerevisiae cultures grown in instrumented microbioreactors show that it is possible to integrate high-throughput studies of growth physiology with global gene expression analysis of microorganisms.

Bioreactors↗